There are no users of connector_atv_platform_data in the mainline
kernel so support for it can be removed from the panel driver.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

There are no users of panel_dpi_platform_data in the mainline
kernel so support for it can be removed from the panel driver.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.

Note that because existing DTSes specify incorrect polarity of reset
lines (active high) and GPU drivers have adopted to this, we follow
the suit and use inverted values when controlling reset lines.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.

Note that because existing DTSes specify incorrect polarity of reset
lines (active high) and GPU drivers have adopted to this, we follow
the suit and use inverted values when controlling reset lines.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.

Note that because existing DTSes specify incorrect polarity of reset
lines (active high) and GPU drivers have adopted to this, we follow
the suit and use inverted values when controlling reset lines.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

There are no users of panel_acx565akm_platform_data in the mainline
kernel so support for it can be removed from the panel driver.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Variable checksum is being used to accumulate values however
it is never read or used afterwards. It is redundant and can
be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

pwm_disable() and pwm_put() are NULL-aware, no need to
duplicate the check in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Only a single out of three devices need a PWM, so from driver it's
optional. Moreover it's a single driver in the entire kernel that
currently selects PWM. Unfortunately this selection is a root cause
of the circular dependencies when we want to enable optional PWM
for some other drivers that select GPIOLIB.

Fixes: a2ed00da ("drivers/video: add support for the Solomon SSD1307 OLED Controller")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Squash portdrv_{core,pci}.c into portdrv.c to ease maintenance and
     make more things static.

   - Make portdrv bind to Switch Ports that have AER. Previously, if
     these Ports lacked MSI/MSI-X, portdrv failed to bind, which meant
     the Ports couldn't be suspended to low-power states. AER on these
     Ports doesn't use interrupts, and the AER driver doesn't need to
     claim them.

   - Assign PCI domain IDs using ida_alloc(), which makes host bridge
     add/remove work better.

  Resource management:

   - To work better with recent BIOSes that use EfiMemoryMappedIO for
     PCI host bridge apertures, remove those regions from the E820 map
     (E820 entries normally prevent us from allocating BARs). In v5.19,
     we added some quirks to disable E820 checking, but that's not very
     maintainable. EfiMemoryMappedIO means the OS needs to map the
     region for use by EFI runtime services; it shouldn't prevent OS
     from using it.

  PCIe native device hotplug:

   - Build pciehp by default if USB4 is enabled, since Thunderbolt/USB4
     PCIe tunneling depends on native PCIe hotplug.

   - Enable Command Completed Interrupt only if supported to avoid user
     confusion from lspci output that says this is enabled but not
     supported.

   - Prevent pciehp from binding to Switch Upstream Ports; this happened
     because of interaction with acpiphp and caused devices below the
     Upstream Port to disappear.

  Power management:

   - Convert AGP drivers to generic power management. We hope to remove
     legacy power management from the PCI core eventually.

  Virtualization:

   - Fix pci_device_is_present(), which previously always returned
     "false" for VFs, causing virtio hangs when unbinding the driver.

  Miscellaneous:

   - Convert drivers to gpiod API to prepare for dropping some legacy
     code.

   - Fix DOE fencepost error for the maximum data object length.

  Baikal-T1 PCIe controller driver:

   - Add driver and DT bindings.

  Broadcom STB PCIe controller driver:

   - Enable Multi-MSI.

   - Delay 100ms after PERST# deassert to allow power and clocks to
     stabilize.

   - Configure Read Completion Boundary to 64 bytes.

  Freescale i.MX6 PCIe controller driver:

   - Initialize PHY before deasserting core reset to fix a regression in
     v6.0 on boards where the PHY provides the reference.

   - Fix imx6sx and imx8mq clock names in DT schema.

  Intel VMD host bridge driver:

   - Fix Secondary Bus Reset on VMD bridges, which allows reset of NVMe
     SSDs in VT-d pass-through scenarios.

   - Disable MSI remapping, which gets re-enabled by firmware during
     suspend/resume.

  MediaTek PCIe Gen3 controller driver:

   - Add MT7986 and MT8195 support.

  Qualcomm PCIe controller driver:

   - Add SC8280XP/SA8540P basic interconnect support.

  Rockchip DesignWare PCIe controller driver:

   - Base DT schema on common Synopsys schema.

  Synopsys DesignWare PCIe core:

   - Collect DT items shared between Root Port and Endpoint (PERST GPIO,
     PHY info, clocks, resets, link speed, number of lanes, number of
     iATU windows, interrupt info, etc) to snps,dw-pcie-common.yaml.

   - Add dma-ranges support for Root Ports and Endpoints.

   - Consolidate DT resource retrieval for "dbi", "dbi2", "atu", etc. to
     reduce code duplication.

   - Add generic names for clocks and resets to encourage more
     consistent naming across drivers using DesignWare IP.

   - Stop advertising PTM Responder role for Endpoints, which aren't
     allowed to be responders.

  TI J721E PCIe driver:

   - Add j721s2 host mode ID to DT schema.

   - Add interrupt properties to DT schema.

  Toshiba Visconti PCIe controller driver:

   - Fix interrupts array max constraints in DT schema"

* tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (95 commits)
  x86/PCI: Use pr_info() when possible
  x86/PCI: Fix log message typo
  x86/PCI: Tidy E820 removal messages
  PCI: Skip allocate_resource() if too little space available
  efi/x86: Remove EfiMemoryMappedIO from E820 map
  PCI/portdrv: Allow AER service only for Root Ports & RCECs
  PCI: xilinx-nwl: Fix coding style violations
  PCI: mvebu: Switch to using gpiod API
  PCI: pciehp: Enable Command Completed Interrupt only if supported
  PCI: aardvark: Switch to using devm_gpiod_get_optional()
  dt-bindings: PCI: mediatek-gen3: add support for mt7986
  dt-bindings: PCI: mediatek-gen3: add SoC based clock config
  dt-bindings: PCI: qcom: Allow 'dma-coherent' property
  PCI: mt7621: Add sentinel to quirks table
  PCI: vmd: Fix secondary bus reset for Intel bridges
  PCI: endpoint: pci-epf-vntb: Fix sparse ntb->reg build warning
  PCI: endpoint: pci-epf-vntb: Fix sparse build warning for epf_db
  PCI: endpoint: pci-epf-vntb: Replace hardcoded 4 with sizeof(u32)
  PCI: endpoint: pci-epf-vntb: Remove unused epf_db_phy struct member
  PCI: endpoint: pci-epf-vntb: Fix call pci_epc_mem_free_addr() in error path
  ...

Pull i3c updates from Alexandre Belloni:
 "A non-urgent fix and SETDASA is now exported to drivers"

* tag 'i3c/for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  MAINTAINERS: mark I3C DRIVER FOR SYNOPSYS DESIGNWARE orphan
  i3c: export SETDASA method
  i3c: Correct the macro module_i3c_i2c_driver

Pull rdma updates from Jason Gunthorpe:
 "Usual size of updates, a new driver, and most of the bulk focusing on
  rxe:

   - Usual typos, style, and language updates

   - Driver updates for mlx5, irdma, siw, rts, srp, hfi1, hns, erdma,
     mlx4, srp

   - Lots of RXE updates:
      * Improve reply error handling for bad MR operations
      * Code tidying
      * Debug printing uses common loggers
      * Remove half implemented RD related stuff
      * Support IBA's recently defined Atomic Write and Flush operations

   - erdma support for atomic operations

   - New driver 'mana' for Ethernet HW available in Azure VMs. This
     driver only supports DPDK"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (122 commits)
  IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces
  RDMA: Add missed netdev_put() for the netdevice_tracker
  RDMA/rxe: Enable RDMA FLUSH capability for rxe device
  RDMA/cm: Make QP FLUSHABLE for supported device
  RDMA/rxe: Implement flush completion
  RDMA/rxe: Implement flush execution in responder side
  RDMA/rxe: Implement RC RDMA FLUSH service in requester side
  RDMA/rxe: Extend rxe packet format to support flush
  RDMA/rxe: Allow registering persistent flag for pmem MR only
  RDMA/rxe: Extend rxe user ABI to support flush
  RDMA: Extend RDMA kernel verbs ABI to support flush
  RDMA: Extend RDMA user ABI to support flush
  RDMA/rxe: Fix incorrect responder length checking
  RDMA/rxe: Fix oops with zero length reads
  RDMA/mlx5: Remove not-used IB_FLOW_SPEC_IB define
  RDMA/hns: Fix XRC caps on HIP08
  RDMA/hns: Fix error code of CMD
  RDMA/hns: Fix page size cap from firmware
  RDMA/hns: Fix PBL page MTR find
  RDMA/hns: Fix AH attr queried by query_qp
  ...

Pull iommufd implementation from Jason Gunthorpe:
 "iommufd is the user API to control the IOMMU subsystem as it relates
  to managing IO page tables that point at user space memory.

  It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO
  container) which is the VFIO specific interface for a similar idea.

  We see a broad need for extended features, some being highly IOMMU
  device specific:
   - Binding iommu_domain's to PASID/SSID
   - Userspace IO page tables, for ARM, x86 and S390
   - Kernel bypassed invalidation of user page tables
   - Re-use of the KVM page table in the IOMMU
   - Dirty page tracking in the IOMMU
   - Runtime Increase/Decrease of IOPTE size
   - PRI support with faults resolved in userspace

  Many of these HW features exist to support VM use cases - for instance
  the combination of PASID, PRI and Userspace IO Page Tables allows an
  implementation of DMA Shared Virtual Addressing (vSVA) within a guest.
  Dirty tracking enables VM live migration with SRIOV devices and PASID
  support allow creating "scalable IOV" devices, among other things.

  As these features are fundamental to a VM platform they need to be
  uniformly exposed to all the driver families that do DMA into VMs,
  which is currently VFIO and VDPA"

For more background, see the extended explanations in Jason's pull request:

  https://lore.kernel.org/lkml/Y5dzTU8dlmXTbzoJ@nvidia.com/

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (62 commits)
  iommufd: Change the order of MSI setup
  iommufd: Improve a few unclear bits of code
  iommufd: Fix comment typos
  vfio: Move vfio group specific code into group.c
  vfio: Refactor dma APIs for emulated devices
  vfio: Wrap vfio group module init/clean code into helpers
  vfio: Refactor vfio_device open and close
  vfio: Make vfio_device_open() truly device specific
  vfio: Swap order of vfio_device_container_register() and open_device()
  vfio: Set device->group in helper function
  vfio: Create wrappers for group register/unregister
  vfio: Move the sanity check of the group to vfio_create_group()
  vfio: Simplify vfio_create_group()
  iommufd: Allow iommufd to supply /dev/vfio/vfio
  vfio: Make vfio_container optionally compiled
  vfio: Move container related MODULE_ALIAS statements into container.c
  vfio-iommufd: Support iommufd for emulated VFIO devices
  vfio-iommufd: Support iommufd for physical VFIO devices
  vfio-iommufd: Allow iommufd to be used in place of a container fd
  vfio: Use IOMMU_CAP_ENFORCE_CACHE_COHERENCY for vfio_file_enforced_coherent()
  ...

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (target, ufs, smartpqi, lpfc).

  There are some core changes, mostly around reworking some of our user
  context assumptions in device put and moving some code around.

  The remaining updates are bug fixes and minor changes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits)
  scsi: sg: Fix get_user() in call sg_scsi_ioctl()
  scsi: megaraid_sas: Fix some spelling mistakes in comment
  scsi: core: Use SCSI_SCAN_INITIAL in do_scsi_scan_host()
  scsi: core: Use SCSI_SCAN_RESCAN in __scsi_add_device()
  scsi: ufs: ufs-mediatek: Remove unnecessary return code
  scsi: ufs: core: Fix the polling implementation
  scsi: libsas: Do not export sas_ata_wait_after_reset()
  scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset
  scsi: libsas: Add smp_ata_check_ready_type()
  scsi: Revert "scsi: hisi_sas: Don't send bcast events from HW during nexus HA reset"
  scsi: Revert "scsi: hisi_sas: Drain bcast events in hisi_sas_rescan_topology()"
  scsi: ufs: ufs-mediatek: Modify the return value
  scsi: ufs: ufs-mediatek: Remove unneeded code
  scsi: device_handler: alua: Call scsi_device_put() from non-atomic context
  scsi: device_handler: alua: Revert "Move a scsi_device_put() call out of alua_check_vpd()"
  scsi: snic: Fix possible UAF in snic_tgt_create()
  scsi: qla2xxx: Initialize vha->unknown_atio_[list, work] for NPIV hosts
  scsi: qla2xxx: Remove duplicate of vha->iocb_work initialization
  scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
  scsi: sd: Use 16-byte SYNCHRONIZE CACHE on ZBC devices
  ...

Pull MM updates from Andrew Morton:

 - More userfaultfs work from Peter Xu

 - Several convert-to-folios series from Sidhartha Kumar and Huang Ying

 - Some filemap cleanups from Vishal Moola

 - David Hildenbrand added the ability to selftest anon memory COW
   handling

 - Some cpuset simplifications from Liu Shixin

 - Addition of vmalloc tracing support by Uladzislau Rezki

 - Some pagecache folioifications and simplifications from Matthew
   Wilcox

 - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use
   it

 - Miguel Ojeda contributed some cleanups for our use of the
   __no_sanitize_thread__ gcc keyword.

   This series should have been in the non-MM tree, my bad

 - Naoya Horiguchi improved the interaction between memory poisoning and
   memory section removal for huge pages

 - DAMON cleanups and tuneups from SeongJae Park

 - Tony Luck fixed the handling of COW faults against poisoned pages

 - Peter Xu utilized the PTE marker code for handling swapin errors

 - Hugh Dickins reworked compound page mapcount handling, simplifying it
   and making it more efficient

 - Removal of the autonuma savedwrite infrastructure from Nadav Amit and
   David Hildenbrand

 - zram support for multiple compression streams from Sergey Senozhatsky

 - David Hildenbrand reworked the GUP code's R/O long-term pinning so
   that drivers no longer need to use the FOLL_FORCE workaround which
   didn't work very well anyway

 - Mel Gorman altered the page allocator so that local IRQs can remnain
   enabled during per-cpu page allocations

 - Vishal Moola removed the try_to_release_page() wrapper

 - Stefan Roesch added some per-BDI sysfs tunables which are used to
   prevent network block devices from dirtying excessive amounts of
   pagecache

 - David Hildenbrand did some cleanup and repair work on KSM COW
   breaking

 - Nhat Pham and Johannes Weiner have implemented writeback in zswap's
   zsmalloc backend

 - Brian Foster has fixed a longstanding corner-case oddity in
   file[map]_write_and_wait_range()

 - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
   Chen

 - Shiyang Ruan has done some work on fsdax, to make its reflink mode
   work better under xfstests. Better, but still not perfect

 - Christoph Hellwig has removed the .writepage() method from several
   filesystems. They only need .writepages()

 - Yosry Ahmed wrote a series which fixes the memcg reclaim target
   beancounting

 - David Hildenbrand has fixed some of our MM selftests for 32-bit
   machines

 - Many singleton patches, as usual

* tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits)
  mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio
  mm: mmu_gather: allow more than one batch of delayed rmaps
  mm: fix typo in struct pglist_data code comment
  kmsan: fix memcpy tests
  mm: add cond_resched() in swapin_walk_pmd_entry()
  mm: do not show fs mm pc for VM_LOCKONFAULT pages
  selftests/vm: ksm_functional_tests: fixes for 32bit
  selftests/vm: cow: fix compile warning on 32bit
  selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions
  mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem
  mm,thp,rmap: fix races between updates of subpages_mapcount
  mm: memcg: fix swapcached stat accounting
  mm: add nodes= arg to memory.reclaim
  mm: disable top-tier fallback to reclaim on proactive reclaim
  selftests: cgroup: make sure reclaim target memcg is unprotected
  selftests: cgroup: refactor proactive reclaim code to reclaim_until()
  mm: memcg: fix stale protection of reclaim target memcg
  mm/mmap: properly unaccount memory on mas_preallocate() failure
  omfs: remove ->writepage
  jfs: remove ->writepage
  ...

Pull networking updates from Paolo Abeni:
 "Core:

   - Allow live renaming when an interface is up

   - Add retpoline wrappers for tc, improving considerably the
     performances of complex queue discipline configurations

   - Add inet drop monitor support

   - A few GRO performance improvements

   - Add infrastructure for atomic dev stats, addressing long standing
     data races

   - De-duplicate common code between OVS and conntrack offloading
     infrastructure

   - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements

   - Netfilter: introduce packet parser for tunneled packets

   - Replace IPVS timer-based estimators with kthreads to scale up the
     workload with the number of available CPUs

   - Add the helper support for connection-tracking OVS offload

  BPF:

   - Support for user defined BPF objects: the use case is to allocate
     own objects, build own object hierarchies and use the building
     blocks to build own data structures flexibly, for example, linked
     lists in BPF

   - Make cgroup local storage available to non-cgroup attached BPF
     programs

   - Avoid unnecessary deadlock detection and failures wrt BPF task
     storage helpers

   - A relevant bunch of BPF verifier fixes and improvements

   - Veristat tool improvements to support custom filtering, sorting,
     and replay of results

   - Add LLVM disassembler as default library for dumping JITed code

   - Lots of new BPF documentation for various BPF maps

   - Add bpf_rcu_read_{,un}lock() support for sleepable programs

   - Add RCU grace period chaining to BPF to wait for the completion of
     access from both sleepable and non-sleepable BPF programs

   - Add support storing struct task_struct objects as kptrs in maps

   - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
     values

   - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions

  Protocols:

   - TCP: implement Protective Load Balancing across switch links

   - TCP: allow dynamically disabling TCP-MD5 static key, reverting back
     to fast[er]-path

   - UDP: Introduce optional per-netns hash lookup table

   - IPv6: simplify and cleanup sockets disposal

   - Netlink: support different type policies for each generic netlink
     operation

   - MPTCP: add MSG_FASTOPEN and FastOpen listener side support

   - MPTCP: add netlink notification support for listener sockets events

   - SCTP: add VRF support, allowing sctp sockets binding to VRF devices

   - Add bridging MAC Authentication Bypass (MAB) support

   - Extensions for Ethernet VPN bridging implementation to better
     support multicast scenarios

   - More work for Wi-Fi 7 support, comprising conversion of all the
     existing drivers to internal TX queue usage

   - IPSec: introduce a new offload type (packet offload) allowing
     complete header processing and crypto offloading

   - IPSec: extended ack support for more descriptive XFRM error
     reporting

   - RXRPC: increase SACK table size and move processing into a
     per-local endpoint kernel thread, reducing considerably the
     required locking

   - IEEE 802154: synchronous send frame and extended filtering support,
     initial support for scanning available 15.4 networks

   - Tun: bump the link speed from 10Mbps to 10Gbps

   - Tun/VirtioNet: implement UDP segmentation offload support

  Driver API:

   - PHY/SFP: improve power level switching between standard level 1 and
     the higher power levels

   - New API for netdev <-> devlink_port linkage

   - PTP: convert existing drivers to new frequency adjustment
     implementation

   - DSA: add support for rx offloading

   - Autoload DSA tagging driver when dynamically changing protocol

   - Add new PCP and APPTRUST attributes to Data Center Bridging

   - Add configuration support for 800Gbps link speed

   - Add devlink port function attribute to enable/disable RoCE and
     migratable

   - Extend devlink-rate to support strict prioriry and weighted fair
     queuing

   - Add devlink support to directly reading from region memory

   - New device tree helper to fetch MAC address from nvmem

   - New big TCP helper to simplify temporary header stripping

  New hardware / drivers:

   - Ethernet:
      - Marvel Octeon CNF95N and CN10KB Ethernet Switches
      - Marvel Prestera AC5X Ethernet Switch
      - WangXun 10 Gigabit NIC
      - Motorcomm yt8521 Gigabit Ethernet
      - Microchip ksz9563 Gigabit Ethernet Switch
      - Microsoft Azure Network Adapter
      - Linux Automation 10Base-T1L adapter

   - PHY:
      - Aquantia AQR112 and AQR412
      - Motorcomm YT8531S

   - PTP:
      - Orolia ART-CARD

   - WiFi:
      - MediaTek Wi-Fi 7 (802.11be) devices
      - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
        devices

   - Bluetooth:
      - Broadcom BCM4377/4378/4387 Bluetooth chipsets
      - Realtek RTL8852BE and RTL8723DS
      - Cypress.CYW4373A0 WiFi + Bluetooth combo device

  Drivers:

   - CAN:
      - gs_usb: bus error reporting support
      - kvaser_usb: listen only and bus error reporting support

   - Ethernet NICs:
      - Intel (100G):
         - extend action skbedit to RX queue mapping
         - implement devlink-rate support
         - support direct read from memory
      - nVidia/Mellanox (mlx5):
         - SW steering improvements, increasing rules update rate
         - Support for enhanced events compression
         - extend H/W offload packet manipulation capabilities
         - implement IPSec packet offload mode
      - nVidia/Mellanox (mlx4):
         - better big TCP support
      - Netronome Ethernet NICs (nfp):
         - IPsec offload support
         - add support for multicast filter
      - Broadcom:
         - RSS and PTP support improvements
      - AMD/SolarFlare:
         - netlink extened ack improvements
         - add basic flower matches to offload, and related stats
      - Virtual NICs:
         - ibmvnic: introduce affinity hint support
      - small / embedded:
         - FreeScale fec: add initial XDP support
         - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
         - TI am65-cpsw: add suspend/resume support
         - Mediatek MT7986: add RX wireless wthernet dispatch support
         - Realtek 8169: enable GRO software interrupt coalescing per
           default

   - Ethernet high-speed switches:
      - Microchip (sparx5):
         - add support for Sparx5 TC/flower H/W offload via VCAP
      - Mellanox mlxsw:
         - add 802.1X and MAC Authentication Bypass offload support
         - add ip6gre support

   - Embedded Ethernet switches:
      - Mediatek (mtk_eth_soc):
         - improve PCS implementation, add DSA untag support
         - enable flow offload support
      - Renesas:
         - add rswitch R-Car Gen4 gPTP support
      - Microchip (lan966x):
         - add full XDP support
         - add TC H/W offload via VCAP
         - enable PTP on bridge interfaces
      - Microchip (ksz8):
         - add MTU support for KSZ8 series

   - Qualcomm 802.11ax WiFi (ath11k):
      - support configuring channel dwell time during scan

   - MediaTek WiFi (mt76):
      - enable Wireless Ethernet Dispatch (WED) offload support
      - add ack signal support
      - enable coredump support
      - remain_on_channel support

   - Intel WiFi (iwlwifi):
      - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
      - 320 MHz channels support

   - RealTek WiFi (rtw89):
      - new dynamic header firmware format support
      - wake-over-WLAN support"

* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
  ipvs: fix type warning in do_div() on 32 bit
  net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
  net: ipa: add IPA v4.7 support
  dt-bindings: net: qcom,ipa: Add SM6350 compatible
  bnxt: Use generic HBH removal helper in tx path
  IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
  selftests: forwarding: Add bridge MDB test
  selftests: forwarding: Rename bridge_mdb test
  bridge: mcast: Support replacement of MDB port group entries
  bridge: mcast: Allow user space to specify MDB entry routing protocol
  bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
  bridge: mcast: Add support for (*, G) with a source list and filter mode
  bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
  bridge: mcast: Add a flag for user installed source entries
  bridge: mcast: Expose __br_multicast_del_group_src()
  bridge: mcast: Expose br_multicast_new_group_src()
  bridge: mcast: Add a centralized error path
  bridge: mcast: Place netlink policy before validation functions
  bridge: mcast: Split (*, G) and (S, G) addition into different functions
  bridge: mcast: Do not derive entry type from its filter mode
  ...

Pull Xtensa updates from Max Filippov:

 - fix kernel build with gcc-13

 - various minor fixes

* tag 'xtensa-20221213' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: add __umulsidi3 helper
  xtensa: update config files
  MAINTAINERS: update the 'T:' entry for xtensa

Pull ARM updates from Russell King:

 - update unwinder to cope with module PLTs

 - enable UBSAN on ARM

 - improve kernel fault message

 - update UEFI runtime page tables dump

 - avoid clang's __aeabi_uldivmod generated in NWFPE code

 - disable FIQs on CPU shutdown paths

 - update XOR register usage

 - a number of build updates (using .arch, thread pointer, removal of
   lazy evaluation in Makefile)

 - conversion of stacktrace code to stackwalk

 - findbit assembly updates

 - hwcap feature updates for ARMv8 CPUs

 - instruction dump updates for big-endian platforms

 - support for function error injection

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (31 commits)
  ARM: 9279/1: support function error injection
  ARM: 9277/1: Make the dumped instructions are consistent with the disassembled ones
  ARM: 9276/1: Refactor dump_instr()
  ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA
  ARM: 9274/1: Add hwcap for Speculative Store Bypassing Safe
  ARM: 9273/1: Add hwcap for Speculation Barrier(SB)
  ARM: 9272/1: vfp: Add hwcap for FEAT_AA32I8MM
  ARM: 9271/1: vfp: Add hwcap for FEAT_AA32BF16
  ARM: 9270/1: vfp: Add hwcap for FEAT_FHM
  ARM: 9269/1: vfp: Add hwcap for FEAT_DotProd
  ARM: 9268/1: vfp: Add hwcap FPHP and ASIMDHP for FEAT_FP16
  ARM: 9267/1: Define Armv8 registers in AArch32 state
  ARM: findbit: add unwinder information
  ARM: findbit: operate by words
  ARM: findbit: convert to macros
  ARM: findbit: provide more efficient ARMv7 implementation
  ARM: findbit: document ARMv5 bit offset calculation
  ARM: 9259/1: stacktrace: Convert stacktrace to generic ARCH_STACKWALK
  ARM: 9258/1: stacktrace: Make stack walk callback consistent with generic code
  ARM: 9265/1: pass -march= only to compiler
  ...

Pull x86 sev updates from Borislav Petkov:

 - Two minor fixes to the sev-guest driver

* tag 'x86_sev_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  virt/sev-guest: Add a MODULE_ALIAS
  virt/sev-guest: Remove unnecessary free in init_crypto()

Pull x86 paravirt update from Borislav Petkov:

 - Simplify paravirt patching machinery by removing the now unused
   clobber mask

* tag 'x86_paravirt_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/paravirt: Remove clobber bitmask from .parainstructions

Pull x86 microcode and IFS updates from Borislav Petkov:
 "The IFS (In-Field Scan) stuff goes through tip because the IFS driver
  uses the same structures and similar functionality as the microcode
  loader and it made sense to route it all through this branch so that
  there are no conflicts.

   - Add support for multiple testing sequences to the Intel In-Field
     Scan driver in order to be able to run multiple different test
     patterns. Rework things and remove the BROKEN dependency so that
     the driver can be enabled (Jithu Joseph)

   - Remove the subsys interface usage in the microcode loader because
     it is not really needed

   - A couple of smaller fixes and cleanups"

* tag 'x86_microcode_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/microcode/intel: Do not retry microcode reloading on the APs
  x86/microcode/intel: Do not print microcode revision and processor flags
  platform/x86/intel/ifs: Add missing kernel-doc entry
  Revert "platform/x86/intel/ifs: Mark as BROKEN"
  Documentation/ABI: Update IFS ABI doc
  platform/x86/intel/ifs: Add current_batch sysfs entry
  platform/x86/intel/ifs: Remove reload sysfs entry
  platform/x86/intel/ifs: Add metadata validation
  platform/x86/intel/ifs: Use generic microcode headers and functions
  platform/x86/intel/ifs: Add metadata support
  x86/microcode/intel: Use a reserved field for metasize
  x86/microcode/intel: Add hdr_type to intel_microcode_sanity_check()
  x86/microcode/intel: Reuse microcode_sanity_check()
  x86/microcode/intel: Use appropriate type in microcode_sanity_check()
  x86/microcode/intel: Reuse find_matching_signature()
  platform/x86/intel/ifs: Remove memory allocation from load path
  platform/x86/intel/ifs: Remove image loading during init
  platform/x86/intel/ifs: Return a more appropriate error code
  platform/x86/intel/ifs: Remove unused selection
  x86/microcode: Drop struct ucode_cpu_info.valid
  ...

Pull x86 cpu updates from Borislav Petkov:

 - Split MTRR and PAT init code to accomodate at least Xen PV and TDX
   guests which do not get MTRRs exposed but only PAT. (TDX guests do
   not support the cache disabling dance when setting up MTRRs so they
   fall under the same category)

   This is a cleanup work to remove all the ugly workarounds for such
   guests and init things separately (Juergen Gross)

 - Add two new Intel CPUs to the list of CPUs with "normal" Energy
   Performance Bias, leading to power savings

 - Do not do bus master arbitration in C3 (ARB_DISABLE) on modern
   Centaur CPUs

* tag 'x86_cpu_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  x86/mtrr: Make message for disabled MTRRs more descriptive
  x86/pat: Handle TDX guest PAT initialization
  x86/cpuid: Carve out all CPUID functionality
  x86/cpu: Switch to cpu_feature_enabled() for X86_FEATURE_XENPV
  x86/cpu: Remove X86_FEATURE_XENPV usage in setup_cpu_entry_area()
  x86/cpu: Drop 32-bit Xen PV guest code in update_task_stack()
  x86/cpu: Remove unneeded 64-bit dependency in arch_enter_from_user_mode()
  x86/cpufeatures: Add X86_FEATURE_XENPV to disabled-features.h
  x86/acpi/cstate: Optimize ARB_DISABLE on Centaur CPUs
  x86/mtrr: Simplify mtrr_ops initialization
  x86/cacheinfo: Switch cache_ap_init() to hotplug callback
  x86: Decouple PAT and MTRR handling
  x86/mtrr: Add a stop_machine() handler calling only cache_cpu_init()
  x86/mtrr: Let cache_aps_delayed_init replace mtrr_aps_delayed_init
  x86/mtrr: Get rid of __mtrr_enabled bool
  x86/mtrr: Simplify mtrr_bp_init()
  x86/mtrr: Remove set_all callback from struct mtrr_ops
  x86/mtrr: Disentangle MTRR init from PAT init
  x86/mtrr: Move cache control code to cacheinfo.c
  x86/mtrr: Split MTRR-specific handling from cache dis/enabling
  ...

Pull x86 boot updates from Borislav Petkov:
 "A  of early boot cleanups and fixes.

   - Do some spring cleaning to the compressed boot code by moving the
     EFI mixed-mode code to a separate compilation unit, the AMD memory
     encryption early code where it belongs and fixing up build
     dependencies. Make the deprecated EFI handover protocol optional
     with the goal of removing it at some point (Ard Biesheuvel)

   - Skip realmode init code on Xen PV guests as it is not needed there

   - Remove an old 32-bit PIC code compiler workaround"

* tag 'x86_boot_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Remove x86_32 PIC using %ebx workaround
  x86/boot: Skip realmode init code when running as Xen PV guest
  x86/efi: Make the deprecated EFI handover protocol optional
  x86/boot/compressed: Only build mem_encrypt.S if AMD_MEM_ENCRYPT=y
  x86/boot/compressed: Adhere to calling convention in get_sev_encryption_bit()
  x86/boot/compressed: Move startup32_check_sev_cbit() out of head_64.S
  x86/boot/compressed: Move startup32_check_sev_cbit() into .text
  x86/boot/compressed: Move startup32_load_idt() out of head_64.S
  x86/boot/compressed: Move startup32_load_idt() into .text section
  x86/boot/compressed: Pull global variable reference into startup32_load_idt()
  x86/boot/compressed: Avoid touching ECX in startup32_set_idt_entry()
  x86/boot/compressed: Simplify IDT/GDT preserve/restore in the EFI thunk
  x86/boot/compressed, efi: Merge multiple definitions of image_offset into one
  x86/boot/compressed: Move efi32_pe_entry() out of head_64.S
  x86/boot/compressed: Move efi32_entry out of head_64.S
  x86/boot/compressed: Move efi32_pe_entry into .text section
  x86/boot/compressed: Move bootargs parsing out of 32-bit startup code
  x86/boot/compressed: Move 32-bit entrypoint code into .text section
  x86/boot/compressed: Rename efi_thunk_64.S to efi-mixed.S

Pull x86 asm updates from Borislav Petkov:

 - Move the 32-bit memmove() asm implementation out-of-line in order to
   fix a 32-bit full LTO build failure with clang where it would fail at
   register allocation.

   Move it to an asm file and clean it up while at it, similar to what
   has been already done on 64-bit

* tag 'x86_asm_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mem: Move memmove to out of line assembler

Pull EFI updates from Ard Biesheuvel:
 "Another fairly sizable pull request, by EFI subsystem standards.

  Most of the work was done by me, some of it in collaboration with the
  distro and bootloader folks (GRUB, systemd-boot), where the main focus
  has been on removing pointless per-arch differences in the way EFI
  boots a Linux kernel.

   - Refactor the zboot code so that it incorporates all the EFI stub
     logic, rather than calling the decompressed kernel as a EFI app.

   - Add support for initrd= command line option to x86 mixed mode.

   - Allow initrd= to be used with arbitrary EFI accessible file systems
     instead of just the one the kernel itself was loaded from.

   - Move some x86-only handling and manipulation of the EFI memory map
     into arch/x86, as it is not used anywhere else.

   - More flexible handling of any random seeds provided by the boot
     environment (i.e., systemd-boot) so that it becomes available much
     earlier during the boot.

   - Allow improved arch-agnostic EFI support in loaders, by setting a
     uniform baseline of supported features, and adding a generic magic
     number to the DOS/PE header. This should allow loaders such as GRUB
     or systemd-boot to reduce the amount of arch-specific handling
     substantially.

   - (arm64) Run EFI runtime services from a dedicated stack, and use it
     to recover from synchronous exceptions that might occur in the
     firmware code.

   - (arm64) Ensure that we don't allocate memory outside of the 48-bit
     addressable physical range.

   - Make EFI pstore record size configurable

   - Add support for decoding CXL specific CPER records"

* tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (43 commits)
  arm64: efi: Recover from synchronous exceptions occurring in firmware
  arm64: efi: Execute runtime services from a dedicated stack
  arm64: efi: Limit allocations to 48-bit addressable physical region
  efi: Put Linux specific magic number in the DOS header
  efi: libstub: Always enable initrd command line loader and bump version
  efi: stub: use random seed from EFI variable
  efi: vars: prohibit reading random seed variables
  efi: random: combine bootloader provided RNG seed with RNG protocol output
  efi/cper, cxl: Decode CXL Error Log
  efi/cper, cxl: Decode CXL Protocol Error Section
  efi: libstub: fix efi_load_initrd_dev_path() kernel-doc comment
  efi: x86: Move EFI runtime map sysfs code to arch/x86
  efi: runtime-maps: Clarify purpose and enable by default for kexec
  efi: pstore: Add module parameter for setting the record size
  efi: xen: Set EFI_PARAVIRT for Xen dom0 boot on all architectures
  efi: memmap: Move manipulation routines into x86 arch tree
  efi: memmap: Move EFI fake memmap support into x86 arch tree
  efi: libstub: Undeprecate the command line initrd loader
  efi: libstub: Add mixed mode support to command line initrd loader
  efi: libstub: Permit mixed mode return types other than efi_status_t
  ...

Pull integrity updates from Mimi Zohar:
 "Aside from the one cleanup, the other changes are bug fixes:

  Cleanup:

   - Include missing iMac Pro 2017 in list of Macs with T2 security chip

  Bug fixes:

   - Improper instantiation of "encrypted" keys with user provided data

   - Not handling delay in updating LSM label based IMA policy rules
     (-ESTALE)

   - IMA and integrity memory leaks on error paths

   - CONFIG_IMA_DEFAULT_HASH_SM3 hash algorithm renamed"

* tag 'integrity-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: Fix hash dependency to correct algorithm
  ima: Fix misuse of dereference of pointer in template_desc_init_fields()
  integrity: Fix memory leakage in keyring allocation error path
  ima: Fix memory leak in __ima_inode_hash()
  ima: Handle -ESTALE returned by ima_filter_rule_match()
  ima: Simplify ima_lsm_copy_rule
  ima: Fix a potential NULL pointer access in ima_restore_measurement_list
  efi: Add iMac Pro 2017 to uefi skip cert quirk
  KEYS: encrypted: fix key instantiation with user-provided data

Pull sysctl updates from Luis Chamberlain:
 "Only a small step forward on the sysctl cleanups for this cycle"

* tag 'sysctl-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  sched: Move numa_balancing sysctls to its own file

Pull modules updates from Luis Chamberlain:
 "Tux gets for xmas an improvement to the average lookup performance of
  kallsyms_lookup_name() by 715x thanks to the work by Zhen Lei, which
  upgraded our old implementation from being O(n) to O(log(n)), while
  also retaining the old implementation support on /proc/kallsyms.

  The only penalty was increasing the memory footprint by 3 *
  kallsyms_num_syms. Folks who want to improve this further now also
  have a dedicated selftest facility through KALLSYMS_SELFTEST.

  Stephen Boyd added zstd in-kernel decompression support, but the only
  users of this would be folks using the load-pin LSM because otherwise
  we do module decompression in userspace.

  The only other thing with mentioning is a minor boot time optimization
  by Rasmus Villemoes which deferes param_sysfs_init() to late init. The
  rest is cleanups and minor fixes"

* tag 'modules-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  livepatch: Call klp_match_callback() in klp_find_callback() to avoid code duplication
  module/decompress: Support zstd in-kernel decompression
  kallsyms: Remove unneeded semicolon
  kallsyms: Add self-test facility
  livepatch: Use kallsyms_on_each_match_symbol() to improve performance
  kallsyms: Add helper kallsyms_on_each_match_symbol()
  kallsyms: Reduce the memory occupied by kallsyms_seqs_of_names[]
  kallsyms: Correctly sequence symbols when CONFIG_LTO_CLANG=y
  kallsyms: Improve the performance of kallsyms_lookup_name()
  scripts/kallsyms: rename build_initial_tok_table()
  module: Fix NULL vs IS_ERR checking for module_get_next_page
  kernel/params.c: defer most of param_sysfs_init() to late_initcall time
  module: Remove unused macros module_addr_min/max
  module: remove redundant module_sysfs_initialized variable

Pull clk driver updates from Stephen Boyd:
 "A pile of clk driver updates with a small tracepoint patch to the clk
  core this time around.

  The core framework is effectively unchanged, with the majority of the
  diff going to the Qualcomm clk driver directory because they added two
  3k line files that are almost all clk data (Abel Vesa from Linaro
  tried to shrink the number of lines down, but it doesn't seem to be
  possible without sacrificing readability).

  The second big driver this time around is the Rockchip rk3588 clk and
  reset unit, at _only_ 2.5k lines.

  Ignoring the big clk drivers from the familiar SoC vendors, there's
  just a bunch of little clk driver updates and fixes throughout here.

  It's the usual set of clk data fixups to describe proper parents, or
  add frequencies to frequency tables, or plug memory leaks when
  function calls fail. Also, some drivers are converted to use modern
  clk_hw APIs, which is always nice to see. And data is deduplicated,
  leading to a smaller kernel Image.

  Overall this batch has a larger collection of cleanups than it
  typically does. Maybe that means there are less new SoCs right now
  that need supporting, and the focus has shifted to quality and
  reliability. I can dream.

  New Drivers:
   - Frequency hopping controller hardware on MediaTek MT8186
   - Global clock controller for Qualcomm SM8550
   - Display clock controller for Qualcomm SC8280XP
   - RPMh clock controller for Qualcomm QDU1000 and QRU1000 SoCs
   - CPU PLL on MStar/SigmaStar SoCs
   - Support for the clock and reset unit of the Rockchip rk3588

  Updates:
   - Tracepoints for clk_rate_request structures
   - Debugfs support for fractional divider clk
   - Make MxL's CGU driver secure compatible
   - Ingenic JZ4755 SoC clk support
   - Support audio clks on X1000 SoCs
   - Remove flags from univ/main/syspll child fixed factor clocks across
     MediaTek platforms
   - Fix clock dependency for ADC on MediaTek MT7986
   - Fix parent for FlexSPI clock for i.MX93
   - Add USB suspend clock on i.MX8MP
   - Unmap anatop base on error for i.MX93 driver
   - Change enet clock parent to wakeup_axi_root for i.MX93
   - Drop LPIT1, LPIT2, TPM1 and TPM3 clocks for i.MX93
   - Mark HSIO bus clock and SYS_CNT clock as critical on i.MX93
   - Add 320MHz and 640MHz entries to PLL146x
   - Add audio shared gate and SAI clocks for i.MX8MP
   - Fix a possible memory leak in the error path of rockchip PLL
     creation
   - Fix header guard for V3S clocks
   - Add IR module clock for f1c100s
   - Correct the parent clocks for the (High Speed) Serial Communication
     Interfaces with FIFO ((H)SCIF) modules and the mixed-up Ethernet
     Switch clocks on Renesas R-Car S4-8
   - Add timer (TMU, CMT) and Cortex-A76 CPU core (Z0) clocks on Renesas
     R-Car V4H
   - Two PLL driver fixups for the Amlogic clk driver
   - Round SD clock rate to improve parent clock selection
   - Add Ethernet Switch and internal SASYNCPER clocks on Renesas R-Car
     S4-8
   - Add DMA (SYS-DMAC), SPI (MSIOF), external interrupt (INTC-EX)
     serial (SCIF), PWM (PWM and TPU), SDHI, and HyperFLASH/QSPI
     (RPC-IF) clocks on Renesas R-Car V4H
   - Add Multi-Function Timer Pulse Unit (MTU3a) clock and reset on
     Renesas RZ/G2L
   - Fix endless loop on Renesas RZ/N1
   - Correct the parent clocks for the High Speed Serial Communication
     Interfaces with FIFO (HSCIF) modules on the Renesas R-Car V4H SoC
     Note: HSCIF0 is used for the serial console on the White-Hawk
     development board
   - Various clk DT binding improvements and conversions to YAML
   - Qualcomm SM8150/SM8250 display clock controller cleaned up
   - Some missing clocks for Qualcomm SM8350 added
   - Qualcomm MSM8974 Global and Multimedia clock controllers
     transitioned to parent_data and parent_hws
   - Use parent_data and add network resets for Qualcomm IPQ8074
   - Qualcomm Krait clock controller modernized
   - Fix pm_runtime usage in Qualcomm SC7180 and SC7280 LPASS clock
     controllers
   - Enable retention mode on Qualcomm SM8250 USB GDSCs
   - Cleanup Qualcomm RPM and RPMh clock drivers to avoid duplicating
     clocks which definition could be shared between platforms
   - Various NULL pointer checks added for allocations"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (188 commits)
  clk: nomadik: correct struct name kernel-doc warning
  clk: lmk04832: fix kernel-doc warnings
  clk: lmk04832: drop superfluous #include
  clk: lmk04832: drop unnecessary semicolons
  clk: lmk04832: declare variables as const when possible
  clk: socfpga: Fix memory leak in socfpga_gate_init()
  clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE
  clk: st: Fix memory leak in st_of_quadfs_setup()
  clk: samsung: Fix memory leak in _samsung_clk_register_pll()
  clk: Add trace events for rate requests
  clk: Store clk_core for clk_rate_request
  clk: qcom: rpmh: add support for SM6350 rpmh IPA clock
  clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names
  clk: qcom: mmcc-msm8974: move clock parent tables down
  clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
  clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names
  clk: qcom: gcc-msm8974: move clock parent tables down
  clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
  dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974
  dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file
  ...

Pull MMC and MEMSTICK updates from Ulf Hansson:
 "MMC core:
   - A few minor improvements and cleanups

  MMC host:
   - Remove some redundant calls to local_irq_{save,restore}()
   - Replace kmap_atomic() with kmap_local_page()
   - Take return values from mmc_add_host() into account
   - dw_mmc-pltfm: Add support to configure clk-phase for socfpga
   - hsq: Minimize latency by using a fifo to dispatch requests
   - litex_mmc: Fixup corner case for polling mode
   - mtk-sd: Add inline crypto engine clock control
   - mtk-sd: Add support for the mediatek MT7986 variant
   - renesas_sdhi: Improve reset from HS400 mode
   - renesas_sdhi: Take DMA end interrupts into account
   - sdhci: Avoid unnecessary update of clock
   - sdhci: Fix an SD tuning issue
   - sdhci-brcmst: Add Kamal Dasu as maintainer for the Broadcom driver
   - sdhci-esdhc-imx: Improve tuning logic
   - sdhci-esdhc-imx: Improve support for the imxrt1050 variant
   - sdhci_f_sdh30: Add support for non-removable media
   - sdhci_f_sdh30: Add support for the Socionext F_SDH30_E51 variant
   - sdhci_f_sdh30: Add reset control support
   - sdhci-msm: Add support for the Qcom SM8550/SM8350/SM6375 variants
   - sdhci-msm: Add support for the Qcom MSM8976 variant
   - sdhci-of-arasan: Add support for dynamic configuration
   - sdhci-of-esdhc: Limit the clock frequency to confirm to spec
   - sdhci-pci: Enable asynchronous probe
   - sdhci-sprd: Improve card detection
   - sdhci-tegra: Improve reset support
   - sdhci-tegra: Add support to program MC stream ID
   - sunplus-mmc: Add new mmc driver for the Sunplus SP7021 controller
   - vub300: Fix warning splat for SDIO irq

  MEMSTICK core:
   - memstick: A few minor improvements and cleanups

  CLK/IOMMU:
   - clk: socfpga: Drop redundant support for clk-phase for the SD/MMC clk
   - iommu: Add tegra specific helper to get stream_id"

* tag 'mmc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (108 commits)
  mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K
  mmc: sdhci-of-esdhc: Modify mismatched function name
  memstick/mspro_block: Convert to use sysfs_emit()/sysfs_emit_at() APIs
  mmc: sdhci-tegra: Issue CMD and DAT resets together
  mmc: sdhci-tegra: Add support to program MC stream ID
  mmc: sdhci-tegra: Separate Tegra194 and Tegra234 SoC data
  mmc: sdhci-tegra: Sort includes alphabetically
  iommu/tegra: Add tegra_dev_iommu_get_stream_id() helper
  iommu: Add note about struct iommu_fwspec usage
  mmc: sdhci-brcmstb: Resolve "unused" warnings with CONFIG_OF=n
  dt-bindings: mmc: sdhci-msm: allow dma-coherent
  dt-bindings: mmc: sdhci-msm: drop properties mentioned in common MMC
  dt-bindings: mmc: sdhci-msm: cleanup style
  dt-bindings: mmc: sdhci-am654: cleanup style
  dt-bindings: mmc: sdhci: document sdhci-caps and sdhci-caps-mask
  mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING
  MAINTAINERS: Update maintainer for SDHCI Broadcom BRCMSTB driver
  mmc: sdhci-of-esdhc: limit the SDHC clock frequency
  mmc: sdhci: Remove unneeded semicolon
  mmc: core: Normalize the error handling branch in sd_read_ext_regs()
  ...

Pull IPMI updates from Corey Minyard:
 "This includes a number of small fixes, as usual.

  It also includes a new driver for doing the i2c (SSIF) interface
  BMC-side, pretty much completing the BMC side interfaces"

* tag 'for-linus-6.2-1' of https://github.com/cminyard/linux-ipmi:
  ipmi/watchdog: use strscpy() to instead of strncpy()
  ipmi: ssif_bmc: Convert to i2c's .probe_new()
  ipmi: fix use after free in _ipmi_destroy_user()
  ipmi/watchdog: Include <linux/kstrtox.h> when appropriate
  ipmi:ssif: Increase the message retry time
  ipmi: Fix some kernel-doc warnings
  ipmi: ssif_bmc: Use EPOLLIN instead of POLLIN
  ipmi: fix msg stack when IPMI is disconnected
  ipmi: fix memleak when unload ipmi driver
  ipmi: fix long wait in unload when IPMI disconnect
  ipmi: kcs: Poll OBF briefly to reduce OBE latency
  bindings: ipmi: Add binding for SSIF BMC driver
  ipmi: ssif_bmc: Add SSIF BMC driver

Pull HID updates from Jiri Kosina:

 - iio support for the MCP2221 HID driver (Matt Ranostay)

 - support for more than one hinge sensor in hid-sensor-custom (Yauhen
   Kharuzhy)

 - PS DualShock 4 controller support (Roderick Colenbrander)

 - XP-PEN Deco LW support (José Expósito)

 - other assorted code cleanups and device ID/quirk addtions

* tag 'for-linus-2022121301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (51 commits)
  HID: logitech HID++: Send SwID in GetProtocolVersion
  HID: hid-elan: use default remove for hid device
  HID: hid-alps: use default remove for hid device
  HID: hid-sensor-custom: set fixed size for custom attributes
  HID: i2c: let RMI devices decide what constitutes wakeup event
  HID: playstation: fix DualShock4 bluetooth CRC endian issue.
  HID: playstation: fix DualShock4 bluetooth memory corruption bug.
  HID: apple: Swap Control and Command keys on Apple keyboards
  HID: intel-ish-hid: ishtp: remove variable rb_count
  HID: uclogic: Standardize test name prefix
  HID: hid-sensor-custom: Allow more than one hinge angle sensor
  HID: ft260: fix 'cast to restricted' kernel CI bot warnings
  HID: ft260: missed NACK from busy device
  HID: ft260: fix a NULL pointer dereference in ft260_i2c_write
  HID: ft260: wake up device from power saving mode
  HID: ft260: missed NACK from big i2c read
  HID: ft260: remove SMBus Quick command support
  HID: ft260: skip unexpected HID input reports
  HID: ft260: do not populate /dev/hidraw device
  HID: ft260: improve i2c large reads performance
  ...

Pull input updates from Dmitry Torokhov:

 - a new driver for Cypress Generation 5 touchscreens

 - a new driver for Hynitron cstxxx touchscreens

 - a new driver for Himax hx83112b touchscreen

 - I2C input devices have been converted to use i2c's probe_new()

 - a large number of input devices are now using
   DEFINE_SIMPLE_DEV_PM_OPS and pm_sleep_ptr() and no longer use
   __maybe_unused annotations

 - improvements to msg2638 touchscreen driver to also support msg2138

 - conversion of several input deevine bindings to yaml/DT schema

 - changes to select touch drivers to move handling of wake irqs to the
   PM core

 - other assorted fixes and improvements.

* tag 'input-for-v6.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (165 commits)
  Input: elants_i2c - delay longer with reset asserted
  dt-bindings: input: Convert ti,drv260x to DT schema
  dt-bindings: input: gpio-beeper: Convert to yaml schema
  Input: pxspad - fix unused data warning when force feedback not enabled
  Input: lpc32xx - allow building with COMPILE_TEST
  Input: nomadik-ske-keypad - allow building with COMPILE_TEST
  Input: pxa27xx-keypad - allow build with COMPILE_TEST
  Input: spear-keyboard - improve build coverage using COMPILE_TEST
  Input: tegra-kbc - allow build with COMPILE_TEST
  Input: tegra-kbc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: tca6416-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: tc3589x - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: st-keyscan - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: sh-keysc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: qt1070 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: pxa27x_keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: pmic8xxx-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: nomadik-ske-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: mcs-touchkey - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: max7359-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  ...

Pull devicetree updates from Rob Herring:
 "DT Bindings:

   - Various LED binding conversions and clean-ups. Convert the
     ir-spi-led, pwm-ir-tx, and gpio-ir-tx LED bindings to schemas.
     Consistently reference LED common.yaml or multi-led schemas and
     disallow undefined properties.

   - Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts,
     and fsl,imx-fb bindings to schema

   - Add ata-generic, Broadcom u-boot environment, and dynamic MTD
     sub-partitions bindings.

   - Make all SPI based displays reference spi-peripheral-props.yaml

   - Fix some schema property regex's which should be fixed strings or
     were missing start/end anchors

   - Remove 'status' in examples, again...

  DT Core:

   - Fix a possible NULL dereference in overlay functions

   - Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which
     never worked)

   - Add of_address_count() helper to count number of 'reg' entries

   - Support .dtso extension for DT overlay source files. Rename staging
     and unittest overlay files.

   - Update dtc to upstream v1.6.1-63-g55778a03df61"

* tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (42 commits)
  dt-bindings: leds: Add missing references to common LED schema
  dt-bindings: leds: intel,lgm: Add missing 'led-gpios' property
  of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
  dt-bindings: lcdif: Fix constraints for imx8mp
  media: dt-bindings: atmel,isc: Drop unneeded unevaluatedProperties
  dt-bindings: Drop Jee Heng Sia
  dt-bindings: thermal: cooling-devices: Add missing cache related properties
  dt-bindings: leds: irled: ir-spi-led: convert to DT schema
  dt-bindings: leds: irled: pwm-ir-tx: convert to DT schema
  dt-bindings: leds: irled: gpio-ir-tx: convert to DT schema
  dt-bindings: leds: mt6360: rework to match multi-led
  dt-bindings: leds: lp55xx: rework to match multi-led
  dt-bindings: leds: lp55xx: switch to preferred 'gpios' suffix
  dt-bindings: leds: lp55xx: allow label
  dt-bindings: leds: use unevaluatedProperties for common.yaml
  dt-bindings: thermal: tsens: Add SM6115 compatible
  of/kexec: Fix reading 32-bit "linux,initrd-{start,end}" values
  dt-bindings: display: Convert fsl,imx-fb.txt to dt-schema
  dt-bindings: Add missing start and/or end of line regex anchors
  dt-bindings: qcom,pdc: Add missing compatibles
  ...

Merge tag 'hwmon-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Driver for OneXPlayer mini AMD sensors

   - Ampere's Altra smpro-hwmon driver

  New chip and attribute support in existing drivers:

   - nct6775: Support for ASUS CROSSHAIR VIII/TUF/ProArt B550M

   - pmbus/ltc2978: Support for LTC7132

   - aquacomputer_d5next: Support for temperature sensor offsets and
     flow sensor pulses

   - coretemp: Support for dynamic ttarget and tjmax

  Improvements:

   - Use devm_regulator_get_enable() where appropriate

   - Use sysfs_emit() instead of scnprintf()

   - Remove some useless #include <linux/hwmon-vid.h>

   - Include <linux/kstrtox.h> when appropriate

   - Use simple i2c probe

   - it87: Check for a valid chip before using force_id, and new new
     module parameter to ignore ACPI resource conflicts

   - jc42: Use regmap, and restore min/max/critical temperatures on
     resume

   - Add reporting power good and status to PMBus based regulators

  Last minute fixes:

   - emc2305: Fix probing of emc2301/2/3, and fix setting pwm values
     manually if THERMAL is enabled

  And various other minor fixes and improvements"

* tag 'hwmon-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (37 commits)
  hwmon: (emc2305) fix pwm never being able to set lower
  hwmon: (emc2305) fix unable to probe emc2301/2/3
  hwmon: (dell-smm) Move error message to make probing silent
  hwmon: use sysfs_emit() to instead of scnprintf()
  hwmon: (oxp-sensors) Fix pwm reading
  hwmon: (aquacomputer_d5next) Add support for Quadro flow sensor pulses
  hwmon: (pmbus/core) Implement regulator get_status
  hwmon: (oxp-sensors) Add AOK ZOE and Mini PRO
  hwmon: (gsc-hwmon) Switch to flexible array to simplify code
  hwmon: (pmbus) Add power good support
  hwmon: (nct6775) add ASUS CROSSHAIR VIII/TUF/ProArt B550M
  hwmon: (coretemp) Add support for dynamic ttarget
  hwmon: (coretemp) Add support for dynamic tjmax
  hwmon: (coretemp) rearrange tjmax handing code
  hwmon: Remove some useless #include <linux/hwmon-vid.h>
  hwmon: (coretemp) Remove obsolete temp_data->valid
  hwmon: add OneXPlayer mini AMD sensors driver
  hwmon: (aquacomputer_d5next) Clear up macros and comments
  hwmon: (it87) Add DMI table for future extensions
  hwmon: Include <linux/kstrtox.h> when appropriate
  ...

Pull pin control updates from Linus Walleij:
 "The two large chunks is the header clean-up from Andy and the Qualcomm
  DT bindings clean-up from Krzysztof. Each which could give rise to
  conflicts, but I haven't seen any.

  The YAML conversions happening around the device tree is the biggest
  item in the series and is the result of Rob Herrings ambition to
  autovalidate these trees against strict schemas and it is paying off
  in lots of bugs found and ever prettier device trees. Sooner or later
  the transition will be complete, Krzysztof is fixing up all of the
  Qualcomm stuff, which is pretty voluminous.

  Core changes:

   - minor but nice and important documentation clean-ups

  New drivers:

   - subdriver for the Qualcomm SDM670 SoC

   - subdriver for the Intel Moorefield SoC

   - trivial support for the NXP Freescale i.MXRT1170 SoC

  Other changes and improvements

   - major clean-up of the Qualcomm pin control device tree bindings by
     Krzysztof

   - major header clean-up by Andy

   - some immutable irqchip clean-up for the Actions Semiconductor and
     Nuvoton drivers

   - GPIO helpers for The Cypress cy8c95x0 driver

   - bias handling in the Mediatek MT7986 driver

   - remove the unused pins-are-numbered concept that never flew"

* tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits)
  pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions()
  dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered
  dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered
  pinctrl: stm32: Remove check for pins-are-numbered
  pinctrl: mediatek: common: Remove check for pins-are-numbered
  pinctrl: qcom: remove duplicate included header files
  pinctrl: sunxi: d1: Add CAN bus pinmuxes
  pinctrl: loongson2: Fix some const correctness
  pinctrl: pinconf-generic: add missing of_node_put()
  pinctrl: intel: Enumerate PWM device when community has a capability
  pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe()
  pwm: lpss: Allow other drivers to enable PWM LPSS
  pwm: lpss: Include headers we are the direct user of
  pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS
  pwm: Add a stub for devm_pwmchip_add()
  pinctrl: k210: call of_node_put()
  pinctrl: starfive: Use existing variable gpio
  dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching
  pinconf-generic: fix style issues in pin_config_param doc
  pinctrl: pinctrl-loongson2: fix Kconfig dependency
  ...

Pull spi updates from Mark Brown:
 "A busy enough release, but not for the core which has only seen very
  small updates. The biggest addition is the readdition of support for
  detailed configuration of the timings around chip selects. That had
  been removed for lack of use but there's been applications found for
  it on Atmel systems. Otherwise the updates are mostly feature
  additions and cleanups to existing drivers.

  Summary:

   - Provide a helper for getting device match data in a way that
     abstracts away which firmware interface is being used.

   - Re-add the spi_set_cs_timing() API for detailed configuration of
     the timing around chip select and support it on Atmel.

   - Support for MediaTek MT7986, Microchip PCI1xxxx, Nuvoton WPCM450
     FIU and Socionext F_OSPI"

* tag 'spi-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (66 commits)
  spi: dt-bindings: Convert Synquacer SPI to DT schema
  spi: spi-gpio: Don't set MOSI as an input if not 3WIRE mode
  spi: spi-mtk-nor: Add recovery mechanism for dma read timeout
  spi: spi-fsl-lpspi: add num-cs binding for lpspi
  spi: spi-fsl-lpspi: support multiple cs for lpspi
  spi: mtk-snfi: Add snfi support for MT7986 IC
  spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE
  spi: cadence-quadspi: Add minimum operable clock rate warning to baudrate divisor calculation
  spi: microchip: pci1xxxx: Add suspend and resume support for PCI1XXXX SPI driver
  spi: dt-bindings: nuvoton,wpcm450-fiu: Fix warning in example (missing reg property)
  spi: dt-bindings: nuvoton,wpcm450-fiu: Fix error in example (bogus include)
  spi: mediatek: Enable irq when pdata is ready
  spi: spi-mtk-nor: Unify write buffer on/off
  spi: intel: Add support for SFDP opcode
  spi: intel: Take possible chip address into account in intel_spi_read/write_reg()
  spi: intel: Implement adjust_op_size()
  spi: intel: Use ->replacement_op in intel_spi_hw_cycle()
  spi: cadence: Drop obsolete dependency on COMPILE_TEST
  spi: Add Nuvoton WPCM450 Flash Interface Unit (FIU) bindings
  spi: wpcm-fiu: Add direct map support
  ...