- 28 Jan, 2019 15 commits
-
-
Gerd Hoffmann authored
The qxl device supports only a single active framebuffer ("primary surface" in spice terminology). In multihead configurations are handled by defining rectangles within the primary surface for each head/crtc. Userspace which uses the qxl ioctl interface (xorg qxl driver) is aware of this limitation and will setup framebuffers and crtcs accordingly. Userspace which uses dumb framebuffers (xorg modesetting driver, wayland) is not aware of this limitation and tries to use two framebuffers (one for each crtc) instead. The qxl kms driver already has the dumb bo separated from the primary surface, by using a (shared) shadow bo as primary surface. This is needed to support pageflips without having to re-create the primary surface. The qxl driver will blit from the dumb bo to the shadow bo instead. So we can extend the shadow logic: Maintain a global shadow bo (aka primary surface), make it big enough that dumb bo's for all crtcs fit in side-by-side. Adjust the pageflip blits to place the heads next to each other in the shadow. With this patch in place multihead qxl works with wayland. Signed-off-by:Gerd Hoffmann <kraxel@redhat.com> Acked-by:
Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-15-kraxel@redhat.com
-
Gerd Hoffmann authored
Pass the shadow bo to qxl_io_create_primary() instead of expecting qxl_io_create_primary to check bo->shadow. Set is_primary flag on the shadow bo. Move the is_primary tracking into qxl_io_create_primary() and qxl_io_destroy_primary() functions. That simplifies primary surface tracking and the workflow in qxl_primary_atomic_update(). Signed-off-by:
-
Gerd Hoffmann authored
Track which bo is used as primary surface. With that in place we don't need the primary_created flag any more, we can just check the primary bo pointer instead. Also verify we don't already have a primary surface in qxl_io_create_primary(). Signed-off-by:
-
Gerd Hoffmann authored
Signed-off-by:
-
Gerd Hoffmann authored
The qxl device ties the cursor to the primary surface. Therefore calling qxl_io_destroy_primary() and qxl_io_create_primary() to switch the framebuffer causes the cursor information being lost and the driver must re-apply it. The correct call order to do that is qxl_io_destroy_primary() + qxl_io_create_primary() + qxl_primary_apply_cursor(). The old code did qxl_io_destroy_primary() + qxl_primary_apply_cursor() + qxl_io_create_primary(). Due to qxl_primary_apply_cursor request being queued in a ringbuffer and qxl_io_create_primary() trapping to the hypervisor instantly there is a high chance that qxl_io_create_primary() is processed first even with the wrong call order. But it's racy and thus not reliable. Signed-off-by:
-
Gerd Hoffmann authored
dumb buffers are used as qxl surfaces, so allocate them as QXL_GEM_DOMAIN_SURFACE. Should usually be allocated in PRIV ttm domain then, so this reduces VRAM memory pressure. Signed-off-by:
-
Gerd Hoffmann authored
The shadow bo is used as qxl surface, so allocate it as QXL_GEM_DOMAIN_SURFACE. Should usually be allocated in PRIV ttm domain then, so this reduces VRAM memory pressure. Signed-off-by:
-
Gerd Hoffmann authored
qxl surfaces (used for framebuffers and gem objects) can live in both VRAM and PRIV ttm domains. Update placement setup to include both. Put PRIV first in the list so it is preferred, so VRAM will have more room for objects which must be allocated there. Signed-off-by:
-
Gerd Hoffmann authored
Without that ttm offsets are not unique, they can refer to objects in both VRAM and PRIV memory (aka main and surfaces slot). One of those "why things didn't blow up without this" moments. Probably offset conflicts are rare enough by pure luck. Signed-off-by:
-
Gerd Hoffmann authored
slot_id_bits and slot_gen_bits can be read directly from qxlrom instead. va_slot_mask is never used anywhere. Signed-off-by:
-
Frediano Ziglio authored
Instead of relaying on surface type use the actual placement. This allow to have different placement for a single type of surface. Signed-off-by:
Frediano Ziglio <fziglio@redhat.com> Acked-by:
-
Gerd Hoffmann authored
Drop pointless indirection, remove the mem_slots array and index variables, drop dynamic allocation. Store memslots in qxl_device instead. Signed-off-by:
-
Gerd Hoffmann authored
Signed-off-by:
-
Gerd Hoffmann authored
Not used, is always NULL. Signed-off-by:
-
Damian Kos authored
This is basically the same fix as in commit fa68d4f8 ("drm/rockchip: fix for mailbox read size") but for cdn_dp_mailbox_validate_receive function. See patchwork.kernel.org/patch/10671981/ for details. Signed-off-by:
Damian Kos <dkos@cadence.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/1542640463-18332-1-git-send-email-dkos@cadence.com
-
- 27 Jan, 2019 4 commits
-
-
Heiko Stuebner authored
Before assigning window data, we should check if the yuv2yuv vop-data is set at all, because it looks like it can otherwise reference something wrong, as I saw on my rk3188 today which ended up in a null pointer dereference in vop_plane_atomic_update when accessing the yuv2yuv data. Fixes: 1c21aa8f ("drm/rockchip: Fix YUV buffers color rendering") Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/2556882.Heuq80WCVD@phil
-
Peter Rosin authored
With the help from drm_atomic_helper_check_plane_state function, clipping now handles planes to be partially or totally off-screen. The plane is disabled if it is not visible. Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Boris Brezillon <bbrezillon@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190110151020.30468-4-peda@axentia.se
-
Peter Rosin authored
The destination crtc rectangle is independent of source plane rotation. Signed-off-by:
-
Peter Rosin authored
Ouch, the driver rotates planes clockwise, which is simply not correct. Signed-off-by:
-
- 25 Jan, 2019 6 commits
-
-
Ville Syrjälä authored
We'll be wanting to send more than just infoframes over HDMI. So add an enum for other packet types. TODO: Maybe just include the infoframe types in the packet type enum and get rid of the infoframe type enum? v2: s/AUDIO_CP/ACP/ (Shashank) Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: linux-media@vger.kernel.org Reviewed-by:Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190110211445.24177-2-ville.syrjala@linux.intel.com
-
Chen-Yu Tsai authored
The A23's display pipeline is similar to the A33. Differences include: - Display backend supports larger layers, 8192x8192 instead of 2048x2048 - TCON has DMA input - There is no SAT module packed in the display backend Add support for the display pipeline and its components. As the MIPI DSI output device is not officially documented, and there are no A23 reference devices to test it, it is not covered by this patch. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190125032314.20915-7-wens@csie.org
-
Chen-Yu Tsai authored
In some cases, such as running a new kernel with an old device tree that has the frontend disabled, the backend's matching frontend might be unavailable. When this happens, the layers should only declare support for formats that the backend support. This partially reverts commit 1c29d263 ("drm/sun4i: Rename sun4i_backend_layer_formats to sun4i_layer_formats") by bringing back sun4i_backend_layer_formats, and passing it to drm_universal_plane_init, while also dropping the modifiers list, in the event no frontend is available. Fixes: b636d3f9 ("drm/sun4i: frontend: Add support for the BGRX8888 input format") Fixes: 9afe52d5 ("drm/sun4i: frontend: Add support for semi-planar YUV input formats") Fixes: 8c8152bf ("drm/sun4i: frontend: Add support for planar YUV input formats") Fixes: b2ddf277 ("drm/sun4i: layer: Add tiled modifier support and helper") Signed-off-by:
-
Chen-Yu Tsai authored
We might want to use the backend pointer from DRM callbacks that get called within drm_universal_plane_init(), such as the .format_mod_supported callback. Move the assignment of the layer's backend pointer to right after the structure is allocated. Signed-off-by:
-
Chen-Yu Tsai authored
The display backend does not support BGRX8888. There is also no trace of this in the original list of supported formats before the commit b636d3f9 ("drm/sun4i: frontend: Add support for the BGRX8888 input format"). Nor do the backend configuration helpers handle this format. Remove BGRX8888 from list of supported formats by the backend. Fixes: 3d4265f8 ("drm/sun4i: backend: Add a helper and a list for supported formats") Signed-off-by:
-
Chen-Yu Tsai authored
The A23's display pipeline is similar to the A33. Differences include: - Display backend supports larger layers, 8192x8192 instead of 2048x2048 - TCON has DMA input - There is no SAT module packed in the display backend Add compatible strings for the display pipeline and its components. As the MIPI DSI output device is not officially documented, and there are no A23 reference devices to test it, it is not covered by this patch. Signed-off-by:
-
- 24 Jan, 2019 9 commits
-
-
Daniel Vetter authored
Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by:
Harry Wentland <harry.wentland@amd.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by:
Jani Nikula <jani.nikula@intel.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by:
CK Hu <ck.hu@mediatek.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused rcar-du to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. Build tested on arm x86 and arm allmodconfig. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190119084014.5355-6-sam@ravnborg.org
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused cdns to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. Build tested on arm x86 and arm allmodconfig. Signed-off-by:
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused arcgpu to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. List of include files sorted alphabetically. Build tested on arm x86 and arm allmodconfig. Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused kirin to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. List of include files sorted alphabetically. Build tested on arm x86 allmodconfig using the following hack to the Kconfig file: | - depends on DRM && OF && ARM64 | + depends on DRM && OF && (ARM64 || (X86_64 && COMPILE_TEST)) Build failed on 32bit ARM - so the X86_64 hack was required. The COMPILE_TEST hack is not submitted as the preferred fix is something where we have coverage on 32bit ARM too. v2: - Sort list of include files Signed-off-by:
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused drm/stm to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. Build tested on arm and x86 allmodconfig v2: - sort list of include files Signed-off-by:
-
Maxime Ripard authored
danvet needs a backmerge to ease the upcoming drmP.h rework Signed-off-by: -
Tetsuo Handa authored
syzbot is hitting a lockdep warning [1] because flush_work() is called without INIT_WORK() after kzalloc() at vkms_atomic_crtc_reset(). Commit 6c234fe3 ("drm/vkms: Implement CRC debugfs API") added INIT_WORK() to only vkms_atomic_crtc_duplicate_state() side. Assuming that lifecycle of crc_work is appropriately managed, fix this problem by adding INIT_WORK() to vkms_atomic_crtc_reset() side. [1] https://syzkaller.appspot.com/bug?id=a5954455fcfa51c29ca2ab55b203076337e1c770Reported-and-tested-by:
syzbot <syzbot+12f1b031b6da017e34f8@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by:
Shayenne Moura <shayenneluzmoura@gmail.com> Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
- Unwind failure on pinning the gen7 PPGTT (Chris) - Fastset updates to make sure DRRS and PSR are properly enabled (Hans) - Header include clean-up (Brajeswar, Jani) - Improvements and clean-up on debugfs (Chris, Jani) - Avoid division by zero on CNL clocks setup (Xiao) - Restrict PSMI context load w/a to Haswell GT1 (Chris) - Remove HW semaphores for gen7 inter-engine sync (Chris) - Pull the render flush into breadcrumb emission (Chris) - i915_params copy and free helpers and other reorgs and docs (Jani) - Remove has_pooled_eu static initializer (Tvrtko) - Updates on kerneldoc (Chris) - Remove redundant trailing request flush (Chris) - ringbuffer irq seqno fixes and clean-up (Chris) - splitting off runtime device info and other clean-up around (Jani) - Selftests improvements (Chris, Daniele) - Flush RING_IMR changes before changing the global GT IMR on gen6 and HSW (Chris) - Some improvements and fixes around GPU reset and GPU hang report (Chris) - Remove partial attempt to swizzle on pread/pwrite (Chris) - Return immediately if trylock fails for direct-reclaim (Chris) - Downgrade scare message for unknown HuC firmware (Jani) - ACPI / PMIC for MIPI / DSI (Hans) - Reduce i915_request_alloc retirement to local context (Chris) - Init per-engine WAs for all engines (Daniele) - drop DPF code for gen8+ (Daniele) - Guard error capture against unpinned vma (Chris) - Use mutex_lock_killable from inside the shrinker (Chris) - Removing pooling from struct_mutex from vmap shrinker (Chris) Signed-off-by:
Dave Airlie <airlied@redhat.com> # gpg: Signature made Fri 11 Jan 2019 09:58:18 AEST # gpg: using RSA key FA625F640EEB13CA # gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" # gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA # Conflicts: # drivers/gpu/drm/i915/intel_dp.c # drivers/gpu/drm/i915/intel_drv.h From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190114183820.GA2855@intel.com
-
- 22 Jan, 2019 3 commits
-
-
Hsin-Yi, Wang authored
Move mipi_dsi_dcs_set_display_off() from innolux_panel_disable() to innolux_panel_unprepare(), so they are consistent with innolux_panel_enable() and innolux_panel_prepare(). This also fixes some mode check and irq timeout issue in MTK dsi code. Since some dsi code (e.g. mtk_dsi) have following call trace: 1. drm_panel_disable(), which calls innolux_panel_disable() 2. switch to cmd mode 3. drm_panel_unprepare(), which calls innolux_panel_unprepare() However, mtk_dsi needs to be in cmd mode to be able to send commands (e.g. mipi_dsi_dcs_set_display_off() and mipi_dsi_dcs_enter_sleep_mode()), so we need these functions to be called after the switch to cmd mode happens, i.e. in innolux_panel_unprepare. Signed-off-by:
Hsin-Yi, Wang <hsinyi@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190109065922.231753-1-hsinyi@chromium.org
-
Ville Syrjälä authored
Consult the I2C_M_STOP flag to determine whether to set the MOT bit or not. Makes it possible to send multiple messages in one go with stop+start generated between the messages (as opposed nothing or repstart depending on whether thr address/rw changed). Not sure anyone has actual use for this but figured I'd handle it since I started to look at that flag for MST remote i2c xfers. Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
-
Jani Nikula authored
We have a wrapper for a reason. Reviewed-by:
-
- 21 Jan, 2019 2 commits
-
-
Sam Ravnborg authored
Reversed logic when writing the original comment, now fixed. Fixes: e9eafcb5 ("drm: move drm_can_sleep() to drm_util.h") Reported-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/stm/ltdc.c: In function 'ltdc_plane_atomic_check': drivers/gpu/drm/stm/ltdc.c:694:13: warning: variable 'src_y' set but not used [-Wunused-but-set-variable] u32 src_x, src_y, src_w, src_h; ^ ^ drivers/gpu/drm/stm/ltdc.c:694:6: warning: variable 'src_x' set but not used [-Wunused-but-set-variable] u32 src_x, src_y, src_w, src_h; ^ Signed-off-by:YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
- 18 Jan, 2019 1 commit
-
-
Paul Kocialkowski authored
This adds the appropriate device-tree compatible for hooking frontend support for the A20. Since the hardware is very similar to the A10, it shares the same quirks (which were already introduced). Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
