- 05 Jan, 2009 40 commits
-
-
Tao Ma authored
When creating a xattr index block, the old calculation forget to add credits for the meta change of the alloc file. So add more credits and more comments to explain it. Signed-off-by:
Tao Ma <tao.ma@oracle.com> Signed-off-by:
Mark Fasheh <mfasheh@suse.com>
-
Tao Ma authored
In xattr set, we should always update ctime if the operation goes sucessfully. The old one mistakenly put it in ocfs2_xattr_set_entry which is only called when we set xattr in inode or xattr block. The side benefit is that it resolve the bug 1052 since in that scenario, ocfs2_calc_xattr_set_need only calc out the xattr set credits while ocfs2_xattr_set_entry update the inode also which isn't concerned with the process of xattr set. Signed-off-by:
-
Tao Ma authored
Actually, when setting a new xattr value, we know it from the very beginning, and it isn't like the extension of bucket in which case we can't figure it out. So remove ocfs2_extend_trans in that function and calculate it before the transaction. It also relieve acl operation from the worry about the side effect of ocfs2_extend_trans. Signed-off-by:
-
Sunil Mushran authored
dlm_get_lock_resource() is supposed to return a lock resource with a proper master. If multiple concurrent threads attempt to lookup the lockres for the same lockid while the lock mastery in underway, one or more threads are likely to return a lockres without a proper master. This patch makes the threads wait in dlm_get_lock_resource() while the mastery is underway, ensuring all threads return the lockres with a proper master. This issue is known to be limited to users using the flock() syscall. For all other fs operations, the ocfs2 dlmglue layer serializes the dlm op for each lockid. Users encountering this bug will see flock() return EINVAL and dmesg have the following error: ERROR: Dlm error "DLM_BADARGS" while calling dlmlock on resource <LOCKID>: bad api args Reported-by:
Coly Li <coyli@suse.de> Signed-off-by:
Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by:
-
Sunil Mushran authored
This patch adds a new lock, dlm->tracking_lock, to protect adding/removing lockres' to/from the dlm->tracking_list. We were previously using dlm->spinlock for the same, but that proved inadequate as we could be freeing a lockres from a context that did not hold that lock. As the new lock only protects this list, we can explicitly take it when removing the lockres from the tracking list. This bug was exposed when testing multiple processes concurrently flock() the same file. Signed-off-by:
-
Sunil Mushran authored
During lockres purge, o2dlm sends a drop reference message to the lockres master. This patch delays the message if the lockres is being migrated. Fixes oss bugzilla#1012 http://oss.oracle.com/bugzilla/show_bug.cgi?id=1012Signed-off-by:
-
Sunil Mushran authored
Patch cleans printed errors in dlm_proxy_ast_handler(). The errors now includes the node number that sent the (b)ast. Also it reduces the number of endian swaps of the cookie. Signed-off-by:
-
Sunil Mushran authored
Patch address a racing migrate request message and an exit domain message. Instead of blocking exit domains for the duration of the migrate, we ignore failure to deliver that message. This is because an exiting domain should not have any active locks and thus has no role to play in the migration. Signed-off-by:
-
Joel Becker authored
The previous optimization used a fast find-highest-bit-set operation to give us a good starting point in calc_code_bit(). This version lets the caller cache the previous code buffer bit offset. Thus, the next call always starts where the last one left off. This reduces the calculation another 39%, for a total 80% reduction from the original, naive implementation. At least, on my machine. This also brings the parity calculation to within an order of magnitude of the crc32 calculation. Signed-off-by:
Joel Becker <joel.becker@oracle.com> Signed-off-by:
-
Joel Becker authored
In the calc_code_bit() function, we must find all powers of two beneath the code bit number, *after* it's shifted by those powers of two. This requires a loop to see where it ends up. We can optimize it by starting at its most significant bit. This shaves 32% off the time, for a total of 67.6% shaved off of the original, naive implementation. Signed-off-by:
-
Joel Becker authored
When I wrote ocfs2_hamming_encode(), I was following documentation of the algorithm and didn't have quite the (possibly still imperfect) grasp of it I do now. As part of this, I literally hand-coded xor. I would test a bit, and then add that bit via xor to the parity word. I can, of course, just do a single xor of the parity word and the source word (the code buffer bit offset). This cuts CPU usage by 53% on a mostly populated buffer (an inode containing utmp.h inline). Joel Signed-off-by:
-
Joel Becker authored
Add OCFS2_FEATURE_INCOMPAT_META_ECC to the list of supported features. Signed-off-by:
-
Joel Becker authored
The superblock is read via a raw call. Validate it after we find it from its signature. Signed-off-by:
-
Joel Becker authored
Use the db_check field of ocfs2_dir_block_trailer to crc/ecc the dirblocks. Signed-off-by:
-
Mark Fasheh authored
Future ocfs2 features metaecc and indexed directories need to store a little bit of data in each dirblock. For compatibility, we place this in a trailer at the end of the dirblock. The trailer plays itself as an empty dirent, so that if the features are turned off, it can be reused without requiring a tunefs scan. This code adds the trailer and validates it when the block is read in. [ Mark is the original author, but I reinserted this code before his dir index work. -- Joel ] Signed-off-by:
-
Joel Becker authored
Change the rest of the naked ocfs2_journal_access() calls in fs/ocfs2/xattr.c to use the appropriate ocfs2_journal_access_*() call for their metadata type. Signed-off-by:
-
Joel Becker authored
ocfs2_remove_value_outside() needs to know the type of buffer it is looking at. Pass in an ocfs2_xattr_value_buf. Signed-off-by:
-
Joel Becker authored
ocfs2_xattr_set_entry is the function that knows what type of block it is setting into. This is what we wanted from ocfs2_xattr_value_buf. Plus, moving the value buf up into ocfs2_xattr_set_entry() allows us to pass it into ocfs2_xattr_set_value_outside() and ocfs2_xattr_cleanup(). Signed-off-by:
-
Joel Becker authored
ocfs2_xattr_update_entry() updates the entry portion of an xattr buffer. This can be part of multiple metadata block types, so pass the buffer in via an ocfs2_xattr_value_buf. Signed-off-by:
-
Joel Becker authored
The callers of ocfs2_xattr_value_truncate() now pass in ocfs2_xattr_value_bufs. These callers are the ones that calculated the xv location, so they are the right starting point. Signed-off-by:
-
Joel Becker authored
Place an ocfs2_xattr_value_buf in ocfs2_xattr_value_truncate() and pass it down to ocfs2_xattr_shrink_size(). We can also pass it into ocfs2_xattr_extend_allocation(), replacing its ocfs2_xattr_value_buf. Signed-off-by:
-
Joel Becker authored
Place an ocfs2_xattr_value_buf in __ocfs2_xattr_shrink_size() and pass it down to __ocfs2_remove_xattr_range(). Signed-off-by:
-
Joel Becker authored
When an ocfs2 extended attribute is large enough to require its own allocation tree, we root it with an ocfs2_xattr_value_root. However, these roots can be a part of inodes, xattr blocks, or xattr buckets. Thus, they need a different journal access function for each container. We wrap the bh, its journal access function, and the value root (xv) in a structure called ocfs2_xattr_valu_buf. This is a package that can be passed around. In this first pass, we simply pass it to the extent tree code. Signed-off-by:
-
Joel Becker authored
The xattr bucket can span multiple blocks on disk. We have wrappers for this structure in the code. We use the new multi-block ecc calls to calculate and validate the bucket. Signed-off-by:
-
Joel Becker authored
The per-metadata-type ocfs2_journal_access_*() functions hook up jbd2 commit triggers and allow us to compute metadata ecc right before the buffers are written out. This commit provides ecc for inodes, extent blocks, group descriptors, and quota blocks. It is not safe to use extened attributes and metaecc at the same time yet. The ocfs2_extent_tree and ocfs2_path abstractions in alloc.c both hide the type of block at their root. Before, it didn't matter, but now the root block must use the appropriate ocfs2_journal_access_*() function. To keep this abstract, the structures now have a pointer to the matching journal_access function and a wrapper call to call it. A few places use naked ocfs2_write_block() calls instead of adding the blocks to the journal. We make sure to calculate their checksum and ecc before the write. Since we pass around the journal_access functions. Let's typedef them in ocfs2.h. Signed-off-by:
-
Joel Becker authored
The majority of ocfs2_new_path() calls are: ocfs2_new_path(path_root_bh(otherpath), path_root_el(otherpath)); Let's call that ocfs2_new_path_from_path(). The rest do similar things from struct ocfs2_extent_tree. Let's call those ocfs2_new_path_from_et(). This will make the next change easier. Signed-off-by:
-
Joel Becker authored
We create wrappers for ocfs2_journal_access() that are specific to the type of metadata block. This allows us to associate jbd2 commit triggers with the block. The triggers will compute metadata ecc in a future commit. Signed-off-by:
-
Joel Becker authored
Add block check calls to the read_block validate functions. This is the almost all of the read-side checking of metaecc. xattr buckets are not checked yet. Writes are also unchecked, and so a read-write mount will quickly fail. Signed-off-by:
-
Joel Becker authored
Add a currently-returns-success hook for quota block reads. We'll be adding checks to this. Signed-off-by:
-
Joel Becker authored
This is the code that computes crc32 and ecc for ocfs2 metadata blocks. There are high-level functions that check whether the filesystem has the ecc feature, mid-level functions that work on a single block or array of buffer_heads, and the low-level ecc hamming code that can handle multiple buffers like crc32_le(). It's not hooked up to the filesystem yet. Signed-off-by:
-
Joel Becker authored
Define struct ocfs2_block_check, an 8-byte structure containing a 32bit crc32_le and a 16bit hamming code ecc. This will be used for metadata checksums. Add the structure to free spaces in the various metadata structures. Add the OCFS2_FEATURE_INCOMPAT_META_ECC bit. Signed-off-by:
-
Joel Becker authored
Filesystems often to do compute intensive operation on some metadata. If this operation is repeated many times, it can be very expensive. It would be much nicer if the operation could be performed once before a buffer goes to disk. This adds triggers to jbd2 buffer heads. Just before writing a metadata buffer to the journal, jbd2 will optionally call a commit trigger associated with the buffer. If the journal is aborted, an abort trigger will be called on any dirty buffers as they are dropped from pending transactions. ocfs2 will use this feature. Initially I tried to come up with a more generic trigger that could be used for non-buffer-related events like transaction completion. It doesn't tie nicely, because the information a buffer trigger needs (specific to a journal_head) isn't the same as what a transaction trigger needs (specific to a tranaction_t or perhaps journal_t). So I implemented a buffer set, with the understanding that journal/transaction wide triggers should be implemented separately. There is only one trigger set allowed per buffer. I can't think of any reason to attach more than one set. Contrast this with a journal or transaction in which multiple places may want to watch the entire transaction separately. The trigger sets are considered static allocation from the jbd2 perspective. ocfs2 will just have one trigger set per block type, setting the same set on every bh of the same type. Signed-off-by:
-
Tao Ma authored
A new mlog mask has to be added into mlog_attribute before it can be really used in mlog. ML_QUOTA is only added in masklog.h, so add it to the array to enable it. Signed-off-by:
-
Joel Becker authored
Pass the actual target bucket for insert through to ocfs2_add_new_xattr_bucket(). Now growing a bucket has no buffer_head knowledge. ocfs2_add_new_xattr_bucket() leavs xs->bucket in the proper state for insert. However, it doesn't update the rest of the search fields in xs, so we still have to relse() and re-find. That's OK, because everything is cached. Signed-off-by:
-
Joel Becker authored
Lift the buckets from ocfs2_add_new_xattr_cluster() up into ocfs2_add_new_xattr_bucket(). Now ocfs2_add_new_xattr_cluster() doesn't deal with buffer_heads. In fact, we no longer have to play get_bh() tricks at all. Signed-off-by:
-
Joel Becker authored
Lift the buckets from ocfs2_adjust_xattr_cross_cluster() up into ocfs2_add_new_xattr_cluster(). Now ocfs2_adjust_xattr_cross_cluster() doesn't deal with buffer_heads. Signed-off-by:
-
Joel Becker authored
Now that ocfs2_adjust_xattr_cross_cluster() has buckets, it can pass them into ocfs2_mv_xattr_bucket_cross_cluster(). It no longer has to care about buffer_heads. The manipulation of first_bh and header_bh moves up to ocfs2_adjust_xattr_cross_cluster(). Signed-off-by:
-
Joel Becker authored
We want to be passing around buckets instead of buffer_heads. Let's get them into ocfs2_adjust_xattr_cross_cluster. Signed-off-by:
-
Joel Becker authored
Now that ocfs2_mv_xattr_buckets() can move a partial cluster's worth of buckets, ocfs2_mv_xattr_bucket_cross_cluster() can use it. Signed-off-by:
-
Joel Becker authored
If you look at ocfs2_mv_xattr_bucket_cross_cluster(), you'll notice that two-thirds of the code is almost identical to ocfs2_mv_xattr_buckets(). The only difference is that ocfs2_mv_xattr_buckets() moves a whole cluster's worth, while ocfs2_mv_xattr_bucket_cross_cluster() moves half the cluster. We change ocfs2_mv_xattr_buckets() to allow moving partial clusters. The original caller of ocfs2_mv_xattr_buckets() still moves the whole cluster's worth - it just passes a start_bucket of 0. Signed-off-by:
-
