- 11 Jun, 2013 2 commits
-
-
Chris Wilson authored
After kicking a ring, it should be free to make progress again and so should not be accused of being stuck until hangcheck fires once more. In order to catch a denial-of-service within a batch or across multiple batches, we still do increment the hangcheck score - just not as severely so that it takes multiple kicks to fail. This should address part of Ben's justified criticism of commit 05407ff8 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Thu May 30 09:04:29 2013 +0300 drm/i915: detect hang using per ring hangcheck_score "There's also another corner case on the kick. If the seqno = 2 (though not stuck), and on the 3rd hangcheck, the ring is stuck, and we try to kick it... we don't actually try to find out if the kick helped." v2: Make sure we catch DoS attempts with batches full of invalid WAITs. v3: Preserve the ability to detect loops by always charging the ring if it is busy on the same request. v4: Make sure we queue another check if on a new batch References: https://bugs.freedesktop.org/show_bug.cgi?id=65394Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Ben Widawsky <ben@bwidawsk.net> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
When we reset and restart a ring, we also want to clear any existing hangcheck. Signed-off-by:
-
- 10 Jun, 2013 17 commits
-
-
Damien Lespiau authored
In case of intel_sdvo_get_active_outputs() failing, we end up reading a value from the stack. Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Damien Lespiau authored
It's now intel_sdvo_get_capabilities(). Signed-off-by:
-
Daniel Vetter authored
The hw state readout code for the pipe config will now check this for us, so rip out this hand-rolled complexity. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Daniel Vetter authored
Looks at first like a bit of overkill, but - Haswell actually wants different enable/disable functions for different plls. - And once we have full dpll hw state tracking we can move the full register setup into the ->enable hook. Reviewed-by:
-
Daniel Vetter authored
Using ids in register macros is much more common in our driver. Also this way we can reduce the platform specific stuff a bit. Reviewed-by:
-
Daniel Vetter authored
An id to match the idx (useful for register access macros) and a name fore neater debug output. Reviewed-by:
-
Daniel Vetter authored
In the future this won't be just for pch plls, so move it into the shared dpll init code. v2: Bikeshed the uncessary {} away while applying to appease checkpatch. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1) Signed-off-by: -
Daniel Vetter authored
Well, the first step of a long road at least, it only reads out the pipe -> shared dpll association thus far. Other state which needs to follow: - hw state of the dpll (on/off + dpll registers). Currently we just read that out from the hw state, but that doesn't work too well when the dpll is in use, but not yet fully enabled. We get away since most likely it already has been enabled and so the correct state is left behind in the registers. But that doesn't hold for atomic modesets when we want to enable all pipes at once. - Refcount reconstruction for each dpll. - Cross-checking of all the above. For that we need to keep the dpll register state both in the pipe and in the shared_dpll struct, so that we can check that every pipe is still connected to a correctly configured dpll. Note that since the refcount resconstruction isn't done yet this will spill a few WARNs at boot-up while trying to disable pch plls which have bogus refcounts. But since there's still a pile of refactoring to do I'd like to lock down the state handling as soon as possible hence decided against reordering the patches to quiet these WARNs - after all the issues they're complaining about have existed since forever, as Jesse can testify by having pch pll states blow up consistently in his fastboot patches ... v2: We need to preserve the old shared_dpll since currently the shared dpll refcount dropping/getting is done in ->mode_set. With the usual pipe_config infrastructure the old dpll id is already lost at that point, hence preserve it in the new config. v3: Rebase on top of the ips patch from Paulo. v4: We need to unconditionally take over the shared_dpll id from the old pipe config when e.g. doing a direct pch port -> cpu edp transition. v5: Move the saving of the old shared_dpll id to an ealier patch. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Daniel Vetter authored
The bits are evenly space, so we can cut down on two big switch blocks. This also greatly simplifies the hw state readout which follows in the next patch. Reviewed-by:
-
Daniel Vetter authored
With the big sed-job prep work done this is now really simple. With the exception that we only assign the right shared dpll id in the ->mode_set callback but also depend upon the old one still being around. Until that mess is fixed up we need to jump through a few hoops to keep the old value save. v2: Kill the funny whitespace spotted by Chris. v3: Move the shared_dpll pipe config fixup into this patch as noticed by Ville. Also unconditionally set the shared_dpll with the current one, since otherwise we won't handle direct pch port -> cpu edp transitions correctly. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Daniel Vetter authored
Dealing with discrete enum values is simpler for hw state readout and pipe config computations than pointers - having neat names instead of chasing pointers should look better in the code. This isn't a that good reason for pch plls, but on haswell we actually have 3 different types of plls: WRPLL, SPLL and the DP clocks. Having explicit names should help there. Since this also adds the intel_crtc_to_shared_dpll helper to further abstract away the crtc -> dpll relationship this will also help to make the next patch simpler, which moves the shared dpll into the pipe configuration. Also note that for uniformity we have two special dpll ids: NONE for pipes which need a shared pll but don't have one (yet) and private for when there's a non-shared pll (e.g. per-pipe or per-port pll). I've thought whether we should also add a 2nd enum for the type of the pll we want (for really generic pll selection code) but thrown that idea out again - likely there's too much platform craziness going on to be able to share the pll selection logic much. Since this touched all the shared_pll functions a bit I've also done an s/intel_crtc/crtc/ replacement on a few of them. v2: Kill DPLL_ID_NONE. It's probably better to call it DPLL_ID_INVALID and use it to check that the compute config stage assigns a dpll to every pipe. But since that code isn't ready yet until we move the dpll selection out of the ->mode_set callback, there's no use for it. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Daniel Vetter authored
For fastboot we need some support to read out the sharing state of plls, at least for platforms where they can be shared (or freely assigned at least). Now for ivb we already have pretty extensive infrastructure for tracking pch plls, and it took us an aweful lot of tries to get that remotely right. Note that hsw could also share plls, but even now they're already freely assignable. So we need this on more than just ivb. So on top of the usual fastboot fun pll sharing seems to be an additional step up in fragility. Hence a common infrastructure for all shared/freely assignable display plls seems to be in order. The plan is to have a bit of dpll hw state readout code, which can be used individually, but also to fill in the pipe config. The hw state cross check code will then use that information to make sure that after every modeset every pipe still is connected to a pll which still has the correct configuration - a lot of the pch pll sharing bugs where due to incorrect sharing. We start this endeavour with a simple s/pch_pll/shared_dpll/ rename job. Reviewed-by:
-
Daniel Vetter authored
Before I start to make a complete mess out of this, crank up the paranoia level a bit. v2: Kill the has_pch_encoder check in put_shared_dpll - it's invalid as spotted by Ville since we currently only put the dpll when we already have the new pipe config. So a direct pch port -> cpu edp transition will hit this. v3: Now that I've lifted my blinders add the WARN_ON Ville requested. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Daniel Vetter authored
Simlar to how disable already works on haswell. This is possible since we now carefully track the pch state in the pipe config. Reviewed-by:
-
Daniel Vetter authored
We ->mode_set is called we can't just blindly reuse an existing pll since that might be shared with a different, still active pch output. v2: Only update the pll settings when the pch pll is know to be unused, otherwise we can wreak havoc with a running pipe. Which in the case of DP will likely result in a black screen due to loss of link lock. v3: Tighten up the asserts a bit more, especially make sure that the pch pll is still enabled when we try to disable it. This would have caught the bug fixed in this patch. Reviewed-by:
-
Damien Lespiau authored
This makes, arguably, the condition on state easier to read. Suggested-by:
-
Chris Wilson authored
The hotplug_mask is no longer used as the hpd interrupt setup is now handled in the core. Signed-off-by:
-
- 07 Jun, 2013 8 commits
-
-
Ville Syrjälä authored
Don't enable the cursor until g4x_fixup_plane() had a chance to do cast its magic spell. Egbert writes: "Today I had the chance to test this. First I tried if I can still reproduce the blank with this patch added when I disable my voodoo g4x_fixup_plane(): It turned out it still happens however very rarely (like 1 out of 20 tries). When I reenabled my voodoo the issue still occurred. I had to switch two lines around, ie: intel_enable_plane(dev_priv, plane, pipe); if (IS_G4X(dev)) g4x_fixup_plane(dev_priv, pipe); + intel_crtc_update_cursor(crtc, true); to avoid the blank screen issue - which is it didn't happen in ~75 tries." v2: Add a comment to remind people of the ordering constraints Acked-by:Egbert Eich <eich@suse.com> Signed-off-by:
-
Rodrigo Vivi authored
WaFbcNukeOn3DBlt for IVB, HSW. According BSPec: "Workaround: Do not enable Render Command Streamer tracking for FBC. Instead insert a LRI to address 0x50380 with data 0x00000004 after the PIPE_CONTROL that follows each render submission." v2: Chris noticed that flush_domains check was missing here and also suggested to do LRI only when fbc is enabled. To avoid do a I915_READ on every flush lets use the module parameter check. v3: Adding Wa name as Damien suggested. v4: Ville noticed VLV doesn't support fbc at all and comment came wrong from spec. v5: Ville noticed than on blt a Cache Clean LRI should be used instead the Nuke one. v6: Check for flush domain on blt (by Ville). Check for scanout dirty (by Chris). v7: Apply proper fbc_dirty implemented by Chris. v8: remove unused variables. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by:
-
Chris Wilson authored
This is required for tracking render damage for use with FBC and will be used in subsequent patches. Signed-off-by:
-
Ville Syrjälä authored
Pull the code to disable trickle feed for all primary planes into a separate function. Signed-off-by:
-
Ville Syrjälä authored
We disable trickle feed in all the (relevant) clock gating functions, except ironlake_init_clock_gating(). Copy paste the same code there as well. Signed-off-by:
-
Ville Syrjälä authored
According to BSpec, trickle feed should be disabled for BW and mobile CL. Those constraints seem to match all of our gen4 chipsets. Trickle feed is disabled via the MI_ARB_STATE register instead of per plane controls on gen4. Reviewed-by:
-
Ville Syrjälä authored
The docs say that the trickle feed disable bit is present (for primary planes only, not video sprites) on CTG, and that it must be set for ELK. Just set it for all g4x chipsets. v2: Do it in init_clock_gating too Reviewed-by:
-
Daniel Vetter authored
We always limited the link bw calculations to 24bpp. Tested with my shiny new high-bpc screen, seems to work as advertised. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65280Tested-by:
shui yangwei <yangweix.shui@intel.com> Reviewed-by:
-
- 06 Jun, 2013 13 commits
-
-
Daniel Vetter authored
For various reasons the hw state readout might not be able to faithfully match the hw state: - broken hw (like the case which motivated this patch here where the sdvo encoder does not implemented mandatory functionality correctly). - platforms which are not supported fully with the pipe config infrastructure - if our code doesn't support a given hw configuration natively, e.g. special restrictions on the per-pipe panel fitters when they're used in high-quality scaling modes. In all these cases both fastboot and the hw state cross checker need to be aware of these cases and act accordingly. To be able to do this add a new quirk flag to the pipe config structure. The specific case at hand is an sdvo encoder which doesn't implement the get_timings function, so adjusted_mode flags will be wrong. The strange thing though is that the encoder _does_ work, even though it doesn't implement any of the timings functions (so neither get nor set, neither for input nor output timings). Not that non-compliant sdvo encoder are any surprise at all ... v2: - Don't read random garbage from the dtd if the get_timings call failed (suggested by Chris). - Still check the interlaced flag, that's read out from someplace else. We want maximal paranoia, after all. Reviewed-by:
-
Wang Xingchao authored
Haswell Display audio depends on power well in graphic side, it should request power well before use it and release power well after use. I915 will not shutdown power well if it detects audio is using. This patch protects display audio crash for Intel Haswell C3 stepping board. Signed-off-by:
Wang Xingchao <xingchao.wang@linux.intel.com> Reviewed-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Wang Xingchao authored
For Intel Haswell chip, HDA controller and codec have power well dependency from GPU side. This patch added support to request/release power well in audio driver. Power save feature should be enabled to get runtime power saving. There's deadlock when request_module(i915) in azx_probe. It looks like: device_lock(audio pci device) -> azx_probe -> module_request (or symbol_request) -> modprobe (userspace) -> i915 init -> drm_pci_init -> pci_register_driver -> bus_add_driver -> driver_attach -> which in turn tries all locks on pci bus, and when it tries the one on the audio device, it will deadlock. This patch introduce a work to store remaining probe stuff, and let request_module run in safe work context. Signed-off-by:
Liam Girdwood <liam.r.girdwood@intel.com> Reviewed-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Takashi Iwai authored
This is a preliminary work for the upcoming Haswell HDMI audio fixes. azx_first_init() function can be safely called after the f/w loader, since the f/w loader doesn't require the sound hardware initialization beforehand. Moving it into azx_probe_continue() cleans up the code flow a bit. Signed-off-by:
-
Wang Xingchao authored
The device can support runtime PM no matter whether it support signal wakeup or not. For some chips like Haswell which doesnot support PME by default, this patch let haswell Display HD-A controller enter runtime suspend, and bring more power saving whith power-well feature enabled. Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Paulo Zanoni authored
CTG/ILK/SNB/IVB support 4kx2k surfaces. HSW supports 4kx4k, but without proper front buffer invalidation on the last 2k lines, so don't enable FBC on these cases for now. v2: Use gen >= 5, not gen > 4 (Daniel). Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Daniel Vetter authored
Incomplete since ilk+ support needs proper pch dpll tracking first. SDVO get_config parts based on a patch from Jesse Barnes, but fixed up to actually work. v2: Make sure that we call encoder->get_config _after_ we get_pipe_config to be consistent in both setup_hw_state and the modeset state checker. Otherwise the clever trick with handling the pixel mutliplier on i915G/GM where the encoder overrides the default value of 1 from the crtc get_pipe_config function doesn't work. Spotted by Imre Deak. v3: Actually cross-check the pixel mutliplier (but not on pch split platforms for now). Now actually also tested on a i915G with a sdvo encoder plugged in. Cc: Imre Deak <imre.deak@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Adding more context from Ville's reply to Rodrigo's question why we need this: "The spec says that on some hardware you need to PLL running before you can poke at the palette registers. I didn't actually try to anger the hardware so I'm not really sure what would happen otherwise, but IIRC Jesse said something about a hard system hang..." And generally documenting such ordering constraints with asserts is Just Good. Signed-off-by:
-
Ville Syrjälä authored
Make assert_sprites_disabled() operational on all platforms where we currently have sprite support enabled. Signed-off-by:
-
Ville Syrjälä authored
Ever since gen4 primary planes were fixed to pipes. And for gen2-3, don't check plane B if it doesn't exist. Signed-off-by:
-
Ville Syrjälä authored
Disable/restore sprite planes around mode-set just like we do for the primary and cursor planes. Now that we have working sprite clipping, this actually works quite decently. Previosuly we didn't even bother to disable sprites when changing mode, which could lead to a corrupted sprite appearing on the screen after a modeset (at least on my IVB). Not sure if all hardware generations would be so forgiving when enabled sprites end up outside the pipe dimensons. v2: Disable rather than enable sprites in ironlake_crtc_disable() Signed-off-by:
-
Ville Syrjälä authored
VLV doesn't have the old video overlay. Signed-off-by:
-
Ville Syrjälä authored
First disable FBC, then IPS, then disable all planes, and finally disable the pipe. v2: Mention IPS in the commit message Signed-off-by:
-
