For at91 boards, there are different IPs for adc. Different IPs has different
STARTUP & PRESCAL mask in ADC_MR.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

As use the multiple compatible string, we can remove hardware register in dt.

CC: devicetree@vger.kernel.org
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Fix to return -EINTR in the error handling case instead
of 0 (ret is assigned after goto, which has no effect),
as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Using devm_iio_device_alloc makes code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Using devm_iio_device_alloc makes code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Using devm_iio_device_alloc makes code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Using devm_iio_device_alloc makes code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Using devm_iio_device_alloc makes code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Using devm_iio_device_alloc makes code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Using devm_iio_device_alloc makes code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Using devm_iio_device_alloc makes code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Using devm_iio_device_alloc makes code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Using devm_iio_device_alloc makes code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch adds IIO driver for Bosch BMA180 triaxial
acceleration sensor.
http://dlnmh9ip6v2uc.cloudfront.net/datasheets/
		Sensors/Accelerometers/BST-BMA180-DS000-07_2.pdf
Signed-off-by: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Add description about in_accelX_power_mode and
in_accel_power_mode_available.
Signed-off-by: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

version.h header inclusion is not necessary as detected by
versioncheck.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A lot of files contain reference to my old e-mail address.
Now I'm going not to read mail from it anymore, so update it
with my current address everywhere.
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the dgnc_driver_kzmalloc function from
driver.c and driver.h. A previous patch replaced all
dgnc_driver_kzmalloc function calls with kzalloc.
Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch replaces dgnc_driver_kzmalloc with kzalloc.
A patch that follows removes the dgnc_driver_kzmalloc
function.
Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch edits the type casts neo_uart_struct and
cls_uart_struct. A previous patch added the marker __iomem
to these structs. This patch ensures that the change to
the marker is consistent. This also removes these
sparse warnings:

warning: incorrect type in assignment (different address spaces)
  expected struct neo_uart_struct [noderef] <asn:2>*ch_neo_uart
  got struct neo_uart_struct *<noident>
warning: incorrect type in assignment (different address spaces)
  expected struct cls_uart_struct [noderef] <asn:2>*ch_cls_uart
  got struct cls_uart_struct *<noident>
Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cc: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The kbuild test robot reports the following error:

tree:   git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
head:   e4a745f9519ef2bbb9d75212ae1cca7582d76266
commit: b63c0539 [7011/7939] staging: r8188eu: Turn on build of new driver
config: x86_64-randconfig-x0-0828 (attached as .config)

All error/warnings:

   drivers/staging/rtl8188eu/core/rtw_p2p.c: In function 'go_add_group_info_attr':
>> drivers/staging/rtl8188eu/core/rtw_p2p.c:70:11: error: 'struct sta_info' has no member named 'is_p2p_device'
      if (psta->is_p2p_device) {

This and the following errors were caused by an incorrect nesting of
conditional compilation directives.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reset PORT_ENABLE bit of port status on loosing PD.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes following error caused during unloading driver.

[ 1127.542888] usb 5-1: USB disconnect, device number 2
[ 1127.542909] ozwpan ozwpan: remove, state 1
[ 1127.542933] usb usb5: USB disconnect, device number 1
[ 1127.618634] hub 5-0:1.0: hub_port_status failed (err = -19)
[ 1127.618647] hub_port_connect_change: 45 callbacks suppressed
[ 1127.618657] hub 5-0:1.0: connect-debounce failed, port 1 disabled
[ 1127.618668] hub 5-0:1.0: cannot disable port 1 (err = -19)
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the (*insn_config) function for a DIO subdevice. It should be
using the data[0] value as the "instruction" to perform on the subdevice.

Use the comedi_dio_insn_config() helper to properly handle instructions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the (*insn_config) function for a DIO subdevice. It should be
using the data[0] value as the "instruction" to perform on the subdevice.

Use the comedi_dio_insn_config() helper to properly handle instructions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the (*insn_config) function for a DIO subdevice. It should be
using the data[0] value as the "instruction" to perform on the subdevice.

Use the comedi_dio_insn_config() helper to properly handle instructions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the (*insn_config) function for a DIO subdevice. It should be
using the data[0] value as the "instruction" to perform on the subdevice.

Use the comedi_dio_insn_config() helper to properly handle instructions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace with struct vnt_usb_send_context.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move
s_vFillRTSHead union vnt_tx_data_head to void *pvRTS argument.
s_vFillCTSHead union vnt_tx_data_head to void *pvCTS argument.

In s_vGenerateTxParameter create union vnt_tx_data_head
pointing to rts_cts;
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As result of patch
rxtx.c s_vGenerateTxParameter create argument bool need rts

RTS and CTS void pointers can be merged.

Create new pointer rts_cts so that unions in s_vFillCTSHead/s_vFillRTSHead
can be joined.

If rts_cts is NULL neither exist.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow conditional statements to be based on true/false instead of
NULL or not pointer pvRTS.

Harmonise all call functions will bool type.

If need_rts is true then rts is needed.

If need_rts is false then
	cts is needed only when byPktType == PK_TYPE_11GB || PK_TYPE_11GA.
	none no rts/cts other byPktTypes.

This allow the joining of pointers pvRTS/pvCTS in to single pointer.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Only one of vnt_rts*/vnt_cts* structures are accessed at any one time.

structures vnt_cts and vnt_cts_fb are members of union vnt_tx_data_head.

Create pointer union head and point structures to the correct member.

Point the union to pvCTS.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s_vFillCTSHead is only called when byPktType == PK_TYPE_11GB ||
byPktType == PK_TYPE_11GA so remove unnecessary if on byPktType.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

byFBOption == AUTO_FB_NONE (0) is the same as PK_TYPE_11B

Reverse if condition to break and allow fall through.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allowing fall through where necessary.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>