- 16 May, 2022 6 commits
-
-
Dave Jiang authored
Call idxd_wq_free_irq() in the drv_disable_wq() function before idxd_wq_reset() is called. Otherwise the wq type is reset and the irq does not get freed. Fixes: 63c14ae6 ("dmaengine: idxd: refactor wq driver enable/disable operations") Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165231367316.986407.11001767338124941736.stgit@djiang5-desk3.ch.intel.comSigned-off-by:
Vinod Koul <vkoul@kernel.org>
-
Dave Jiang authored
Jacob reported that with lockdep debug turned on, idxd_device_driver removal causes kernel splat from lock assert warning for idxd_device_wqs_clear_state(). Make sure idxd_device_wqs_clear_state() holds the wq lock for each wq when cleaning the wq state. Move the call outside of the device spinlock. Reported-by:
Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by:
-
Dave Jiang authored
The idxd driver always gated the pasid enabling under a single knob and this assumption is incorrect. The pasid used for kernel operation can be independently toggled and has no dependency on the user pasid (and vice versa). Split the two so they are independent "enabled" flags. Signed-off-by:
-
Geert Uytterhoeven authored
Despite the name, R-Car V3U is the first member of the R-Car Gen4 family. Hence move its compatible value to the R-Car Gen4 section. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/e6e4cf701f3a43b061b9c3f7f0adc4d6addd4722.1651497024.git.geert+renesas@glider.beSigned-off-by:
-
Christophe JAILLET authored
If a call to alloc_chrdev_region() fails, the already allocated resources are leaking. Add the needed error handling path to fix the leak. Fixes: 42d279f9 ("dmaengine: idxd: add char driver to expose submission portal to userland") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
-
Akhil R authored
Use platform_irq_get() instead platform_get_resource() for IRQ resource to fix the probe failure. platform_get_resource() fails to fetch the IRQ resource as it might not be ready at that time. platform_irq_get() is also the recommended way to get interrupt as it directly gives the IRQ number and no conversion from resource is required. Fixes: ee170280 ("dmaengine: tegra: Add tegra gpcdma driver") Reported-by:
Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by:
Akhil R <akhilrajeev@nvidia.com> Acked-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
-
- 22 Apr, 2022 4 commits
-
-
Yunbo Yu authored
It is unnecessary to call spin_lock_bh() for that you are already in a tasklet. Signed-off-by:
Yunbo Yu <yuyunbo519@gmail.com> Link: https://lore.kernel.org/r/20220420122754.148359-1-yuyunbo519@gmail.comSigned-off-by:
-
Dave Jiang authored
Move the core driver operations from wq driver to the drv_enable_wq() and drv_disable_wq() functions. The move should reduce the wq driver's knowledge of the core driver operations and prevent code confusion for future wq drivers. Signed-off-by:
-
Jayesh Choudhary authored
Correct the RX PSIL thread for sa3ul. Signed-off-by:
Jayesh Choudhary <j-choudhary@ti.com> Fixes: 5ac6bfb5 ("dmaengine: ti: k3-psil: Add AM62x PSIL and PDMA data") Link: https://lore.kernel.org/r/20220421065323.16378-1-j-choudhary@ti.comSigned-off-by:
-
Vinod Koul authored
LKP bot reports a new warning: Warning: drivers/dma/ptdma/ptdma-dmaengine.c:262:1: warning: no previous prototype for 'pt_tx_status' [-Wmissing-prototypes] pt_tx_status() should be static, so declare as such. Reported-by:
kernel test robot <lkp@intel.com> Fixes: d9650682 ("dmaengine: PTDMA: support polled mode") Link: https://lore.kernel.org/r/20220421052407.745637-1-vkoul@kernel.orgSigned-off-by:
-
- 20 Apr, 2022 16 commits
-
-
Ben Walker authored
The value parameter is a single byte, so duplicate it to the 8 byte range that is used as the pattern. Signed-off-by:
Ben Walker <benjamin.walker@intel.com> Cc: Sinan Kaya <okaya@kernel.org> Link: https://lore.kernel.org/r/20220301182551.883474-5-benjamin.walker@intel.comSigned-off-by:
-
Ben Walker authored
The value passed in to .prep_dma_memset is to be treated as a single byte repeating pattern. Signed-off-by:
-
Ben Walker authored
The value passed in to .prep_dma_memset is to be treated as a single byte repeating pattern. Signed-off-by:
-
Ben Walker authored
Document this function to make clear the expected behavior of the 'value' parameter. It was intended to match the behavior of POSIX memset as laid out here: https://lore.kernel.org/dmaengine/YejrA5ZWZ3lTRO%2F1@matsya/Signed-off-by:
-
Dave Jiang authored
Move the calling of request_irq() and other related irq setup code until after the WQ is successfully enabled. This reduces the amount of setup/teardown if the wq is not configured correctly and cannot be enabled. Signed-off-by:
-
Jiapeng Chong authored
Eliminate the follow versioncheck warning: ./drivers/dma/tegra186-gpc-dma.c: 21 linux/version.h not needed. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20220413083842.69845-1-jiapeng.chong@linux.alibaba.comSigned-off-by:
-
Dave Jiang authored
Looks like I forgot to add DMA_INTERRUPT cap setting to the idxd driver and dmatest is still working regardless of this mistake. Add an explicit check of DMA_INTERRUPT capability for dmatest to make sure the DMA device being used actually supports interrupt before the test is launched and also that the driver is programmed correctly. Signed-off-by:
-
Haowen Bai authored
This fixes the following sparse warnings: drivers/dma/mediatek/mtk-hsdma.c:604:26: warning: Using plain integer as NULL pointer Signed-off-by:
Haowen Bai <baihaowen@meizu.com> Link: https://lore.kernel.org/r/1649750340-30777-1-git-send-email-baihaowen@meizu.comSigned-off-by:
-
Haowen Bai authored
Unneeded variable: "retval". Return "NULL" , so we have to make code clear. better way, drop the function. Signed-off-by:
-
Dave Jiang authored
Load the max_xfer_size and max_batch_size values from the values read from registers to the shadow variables. This will allow the read-only device to display the correct values for the sysfs attributes. Signed-off-by:
-
Dave Jiang authored
Even though idxd driver has always supported interrupt, it never actually set the DMA_INTERRUPT cap bit. Rectify this mistake so the interrupt capability is advertised. Reported-by:
-
Aidan MacDonald authored
Set the maximum segment size, since the hardware can do transfers larger than the default 64 KiB returned by dma_get_max_seg_size(). The maximum segment size is limited by the 24-bit transfer count field in DMA descriptors. The number of bytes is equal to the transfer count times the transfer size unit, which is selected by the driver based on the DMA buffer address and length of the transfer. The size unit can be as small as 1 byte, so set the maximum segment size to 2^24-1 bytes to ensure the transfer count will not overflow regardless of the size unit selected by the driver. Signed-off-by:
Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20220411153618.49876-1-aidanmacdonald.0x0@gmail.comSigned-off-by:
-
Ilya Novikov authored
If the DMA_PREP_INTERRUPT flag is not provided, run in polled mode, which significantly improves IOPS: more than twice on chunks < 4K. Signed-off-by:
Ilya Novikov <i.m.novikov@yadro.com> Link: https://lore.kernel.org/r/20220413113733.59041-1-i.m.novikov@yadro.comSigned-off-by:
-
Vinod Koul authored
Document the compatible for GPI DMA controller on SC7280 SoC Signed-off-by:
-
Yunbo Yu authored
It is unnecessary to call spin_lock_bh() if you are already in a tasklet. Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20220418142021.1241558-1-yuyunbo519@gmail.comSigned-off-by:
-
Radhey Shyam Pandey authored
MCDMA IP provides up to 16 multiple channels of data movement each on MM2S and S2MM paths. Inline with implementation, in the binding add description for the channel ID start index and mention that it's fixed irrespective of the MCDMA IP configuration(number of read/write channels). Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1649939061-6675-1-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by:
-
- 13 Apr, 2022 4 commits
-
-
Bjorn Andersson authored
The Qualcomm SM8350 platform does, like the SM8450, provide a set of GPI controllers with an ee-offset of 0x10000. Add this to the driver. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220412212959.2385085-1-bjorn.andersson@linaro.orgSigned-off-by:
-
Vinod Koul authored
Controller on newer SoCs like SM8450 have registers at at offset. Add ee_offset to driver_data and add this compatible for the driver. Signed-off-by:
-
Vinod Koul authored
Add the compatible for newer qcom socs with gpi dma i.e qcom sm8350 and sm8450. Signed-off-by:
-
Vinod Koul authored
Newer platforms seem to have strict requirement for TRE flags which causes transaction to timeout. This was resolved to missing chain and link flag for duplex spi transaction. So add these two flags. Signed-off-by:
-
- 11 Apr, 2022 10 commits
-
-
Christophe JAILLET authored
According to lib/idr.c, The IDA handles its own locking. It is safe to call any of the IDA functions without synchronisation in your code. so the 'chan_mutex' mutex can just be removed. It is here only to protect some ida_alloc()/ida_free() calls. Signed-off-by:
-
Dave Jiang authored
Add additional structure definitions for Intel In-memory Analytics Accelerator (IAA/IAX). See specification (1) for more details. 1: https://cdrdv2.intel.com/v1/dl/getContent/721858Signed-off-by:
-
Akhil R authored
Adding GPC DMA controller driver for Tegra. The driver supports dma transfers between memory to memory, IO peripheral to memory and memory to IO peripheral. Co-developed-by:
Pavan Kunapuli <pkunapuli@nvidia.com> Signed-off-by:
Rajesh Gumasta <rgumasta@nvidia.com> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
-
Akhil R authored
Add DT binding document for Nvidia Tegra GPCDMA controller. Signed-off-by:
-
Olivier Dautricourt authored
This email should now be used to contact me. Signed-off-by:
Olivier Dautricourt <olivier.dautricourt@orolia.com> Acked-by:
-
Olivier Dautricourt authored
This email should now be used to contact me. Signed-off-by:
-
Dave Jiang authored
Add string processing with strim() in order to remove trailing white spaces that may be input by user for the wq->name. Signed-off-by:
-
Paul Kocialkowski authored
The current documentation for the residue reported in a cyclic transfer case mentions that the reported residue should be relative to the current period only. However the definition of DMA_RESIDUE_GRANULARITY_SEGMENT specifies that the residue should be updated after each period for a cyclic transfer, which is in direct contradiction. Moreover the pcm_dmaengine common code uses the residue relative to the whole cyclic buffer size, not one period. Correct the residue-related documentation to reflect this. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Link: https://lore.kernel.org/r/20220331134114.703782-1-paul.kocialkowski@bootlin.comSigned-off-by:
-
Amelie Delaunay authored
STM32_MDMA_CCR bit[8] is used to enable Secure Mode (SM). If this bit is set, it means that all the channel registers are write-protected. So the channel is not available for Linux use. Add stm32_mdma_filter_fn() callback filter and give it to __dma_request_chan (instead of dma_get_any_slave_channel()), to exclude the channel if it is marked Secure. Signed-off-by:
Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220330103645.99969-1-amelie.delaunay@foss.st.comSigned-off-by:
-
Christophe Leroy authored
powerpc's asm/prom.h brings some headers that it doesn't need itself. In order to clean it up, first add missing headers in users of asm/prom.h Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/f98acba303489bdf003e7256460696225b00702e.1648833428.git.christophe.leroy@csgroup.euSigned-off-by:
-
