tx-internal-delays and rx-internal-delays are a common setting for RGMII
capable devices.

These properties are used when the phy-mode or phy-controller is set to
rgmii-id, rgmii-rxid or rgmii-txid.  These modes indicate to the
controller that the PHY will add the internal delay for the connection.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ioana Ciornei says:

====================
dpaa2-eth: small updates

This patch set adds some updates to the dpaa2-eth driver: trimming of
the frame queue debugfs counters, cleanup of the remaining sparse
warnings and some other small fixes such as a recursive header include.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Two of the function parameters (qtype and index) were misspelled in the
associated descriptions of dpni_[set/get]_taildrop which led to sparse
warnings. Fix this by using the exact same names as present in the
function definition.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The dpaa2-eth.h header file includes dpaa2-eth-trace.h which includes
back dpaa2-eth leading to a recursion in the include path. Fix this by
removing the include of dpaa2-eth.h in the trace header.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should keep retrying to acquire buffers through the software portals
as long as the function returns -EBUSY and the number of retries is
__below__ DPAA2_ETH_SWP_BUSY_RETRIES.

Fixes: ef17bd7c ("dpaa2-eth: Avoid unbounded while loops")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before passing the result of skb_to_sgvec() to dma_map_sg() check if any
error was returned.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With the addition of multiple traffic classes support, the number
of available frame queues grew significantly, overly inflating the
debugfs FQ statistics entry. Update it to only show the queues
which are actually in use (i.e. have a non-zero frame counter).
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we are not using in-band autonegotiation, there is no point passing
the request to restart autonegotiation on to the driver.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert the ar9331 DSA driver to use the finalised link parameters in
mac_link_up() rather than the parameters in mac_config().
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5 updates 2020-06-23

This series adds misc cleanup and updates to mlx5 driver.

1) Misc updates and cleanup
2) Use RCU instead of spinlock for vxlan table

v1->v2:
 - Removed unnecessary Fixes Tags

v2->v3:
 - Drop "macro undefine" patch, it has no value

v3->v4:
 - Drop the Relaxed ordering patch.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add an interface for the phy_speed_(up|down) functions when a driver
makes use of phylink. These pass the call through to phylib when we
have a normal PHY attached (i.o.w., not a PHY on a SFP module.)
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct mlx5_vxlan_port is not exposed to the outside callers, it is
redundant to return a pointer to it from mlx5_vxlan_port_lookup(), to be
only used as a boolean, so just return a boolean.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Remove the spinlock protecting the vxlan table and use RCU instead.
This will improve performance as it will eliminate contention on data
path cores.

Fixes: b3f63c3d ("net/mlx5e: Add netdev support for VXLAN tunneling")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>

en_tc.h header file declares several TC-specific functions in
CONFIG_MLX5_ESWITCH block even though those functions are only compiled
when CONFIG_MLX5_CLS_ACT is set, which is a recent change. Move them to
proper block.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Maor Dickman <maord@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

After the cited commit, the header net/arp.h is no longer used in en_rep.c.
So, move it to the new file rep/neigh.c that uses it now.
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

mlx5e_xsk_first_unused_channel is a leftover from old versions of the
first XSK commit, and it was never used. Remove it.

Fixes: db05815b ("net/mlx5e: Add XSK zero-copy support")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Use kfree() instead of kvfree() on ft->g in arfs_create_groups() because
the memory is allocated with kcalloc().
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Missing space at the end of a comment line, add it.
Signed-off-by: Hu Haowen <xianfengting221@163.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Flow steering core layer is independent of the eswitch layer.
Hence avoid fs_core dependency on eswitch.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

In the case of ptp_pch, after removing PCI helper functions, .suspend()
and .resume() became empty-body functions. Hence, define them NULL and
use dev_pm_ops.

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Flow metering entries in IEEE 802.1Qci is an optional function for a
flow filtering module. Flow metering is two rates two buckets and three
color marker to policing the frames. This patch only enable one rate one
bucket and in color blind mode. Flow metering instance are as
specified in the algorithm in MEF 10.3 and in Bandwidth Profile
Parameters. They are:

a) Flow meter instance identifier. An integer value identifying the flow
meter instance. The patch use the police 'index' as thin value.
b) Committed Information Rate (CIR), in bits per second. This patch use
the 'rate_bytes_ps' represent this value.
c) Committed Burst Size (CBS), in octets. This patch use the 'burst'
represent this value.
d) Excess Information Rate (EIR), in bits per second.
e) Excess Burst Size per Bandwidth Profile Flow (EBS), in octets.
And plus some other parameters. This patch set EIR/EBS default disable
and color blind mode.

v1->v2 changes:
- Use div_u64() as division replace the '/' report:

All errors (new ones prefixed by >>):

   ld: drivers/net/ethernet/freescale/enetc/enetc_qos.o: in function `enetc_flowmeter_hw_set':
>> enetc_qos.c:(.text+0x66): undefined reference to `__udivdi3'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Po Liu <Po.Liu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hardware device may include more than one police entry. Specifying the
action's index make it possible for several tc filters to share the same
police action when installing the filters.

Propagate this index to device drivers through the flow offload
intermediate representation, so that drivers could share a single
hardware policer between multiple filters.

v1->v2 changes:
- Update the commit message suggest by Ido Schimmel <idosch@idosch.org>
Signed-off-by: Po Liu <Po.Liu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Base on the tc flower offload police action add max frame size by the
parameter 'mtu'. Tc flower device driver working by the IEEE 802.1Qci
stream filter can implement the max frame size filtering. Add it to the
current hardware tc flower stearm filter driver.
Signed-off-by: Po Liu <Po.Liu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current police offloading support the 'burst'' and 'rate_bytes_ps'. Some
hardware own the capability to limit the frame size. If the frame size
larger than the setting, the frame would be dropped. For the police
action itself already accept the 'mtu' parameter in tc command. But not
extend to tc flower offloading. So extend 'mtu' to tc flower offloading.
Signed-off-by: Po Liu <Po.Liu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nikolay Aleksandrov says:

====================
net: bridge: fdb activity tracking

This set adds extensions needed for EVPN multi-homing proper and
efficient mac sync. User-space (e.g. FRR) needs to be able to track
non-dynamic entry activity on per-fdb basis depending if a tracked fdb is
currently peer active or locally active and needs to be able to add new
peer active fdb (static + track + inactive) without refreshing it to get
real activity tracking. Patch 02 adds a new NDA attribute - NDA_FDB_EXT_ATTRS
to avoid future pollution of NDA attributes by bridge or vxlan. New
bridge/vxlan specific fdb attributes are embedded in NDA_FDB_EXT_ATTRS,
which is used in patch 03 to pass the new NFEA_ACTIVITY_NOTIFY attribute
which controls if an fdb should be tracked and also reflects its current
state when dumping. It is treated as a bitfield, current valid bits are:
 1 - mark an entry for activity tracking
 2 - mark an entry as inactive to avoid multiple notifications and
     reflect state properly

Patch 04 adds the ability to avoid refreshing an entry when changing it
via the NFEA_DONT_REFRESH flag. That allows user-space to mark a static
entry for tracking and keep its real activity unchanged.
The set has been extensively tested with FRR and those changes will
be upstreamed if/after it gets accepted.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When we modify or create a new fdb entry sometimes we want to avoid
refreshing its activity in order to track it properly. One example is
when a mac is received from EVPN multi-homing peer by FRR, which doesn't
want to change local activity accounting. It makes it static and sets a
flag to track its activity.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the ability to notify about activity of any entries
(static, permanent or ext_learn). EVPN multihoming peers need it to
properly and efficiently handle mac sync (peer active/locally active).
We add a new NFEA_ACTIVITY_NOTIFY attribute which is used to dump the
current activity state and to control if static entries should be monitored
at all. We use 2 bits - one to activate fdb entry tracking (disabled by
default) and the second to denote that an entry is inactive. We need
the second bit in order to avoid multiple notifications of inactivity.
Obviously this makes no difference for dynamic entries since at the time
of inactivity they get deleted, while the tracked non-dynamic entries get
the inactive bit set and get a notification.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add an attribute to NDA which will contain all future fdb-specific
attributes in order to avoid polluting the NDA namespace with e.g.
bridge or vxlan specific attributes. The attribute is called
NDA_FDB_EXT_ATTRS and the structure would look like:
 [NDA_FDB_EXT_ATTRS] = {
    [NFEA_xxx]
 }
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can just pass ndm as an argument instead of its fields separately.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Antoine Tenart says:

====================
net: phy: mscc: PHC and timestamping support

This series aims at adding support for PHC and timestamping operations
in the MSCC PHY driver, for the VSC858x and VSC8575. Those PHYs are
capable of timestamping in 1-step and 2-step for both L2 and L4 traffic.

As of this series, only IPv4 support was implemented when using L4 mode.
This is because of an hardware limitation which prevents us for
supporting both IPv4 and IPv6 at the same time. Implementing support for
IPv6 should be quite easy (I do have the modifications needed for the
hardware configuration) but I did not see a way to retrieve this
information in hwtstamp(). What would you suggest?

Those PHYs are distributed in hardware packages containing multiple
times the PHY. The VSC8584 for example is composed of 4 PHYs. With
hardware packages, parts of the logic is usually common and one of the
PHY has to be used for some parts of the initialization. Following this
logic, the 1588 blocks of those PHYs are shared between two PHYs and
accessing the registers has to be done using the "base" PHY of the
group. This is handled thanks to helpers in the PTP code (and locks).
We also need the MDIO bus lock while performing a single read or write
to the 1588 registers as the read/write are composed of multiple MDIO
transactions (and we don't want other threads updating the page).

To get and set the PHC time, a GPIO has to be used and changes are only
retrieved or committed when on a rising edge. The same GPIO is shared by
all PHYs, so the granularity of the lock protecting it has to be
different from the ones protecting the 1588 registers (the VSC8584 PHY
has 2 1588 blocks, and a single load/save pin).

Patch 1 extends the recently added helpers to share information between
PHYs of the same hardware package; to allow having part of the probe to
be shared (in addition to the already supported init part). This will be
used when adding support for PHC/TS to initialize locks.

Patches 2 and 3 are mostly cosmetic.

Patch 4 takes into account the 1588 block in the MACsec initialization,
to allow having both the MACsec and 1588 blocks initialized on a running
system.

Patches 5 and 6 add support for PHC and timestamping operations in the
MSCC driver. An initialization of the 1588 block (plus all the registers
definition; and helpers) is added first; and then comes a patch to
implement the PHC and timestamping API.

Patches 7 and 8 add the required hardware description for device trees,
to be able to use the load/save GPIO pin on the PCB120 board.

To use this on a PCB120 board, two other series are needed and have
already been sent upstream (one is merged). There are no dependency
between all those series.

Since v3:
  - Fixed a SKB leak.
  - Removed ts_lock from the init, as TS and PHC operations aren't
    registered at this time.
  - Refectored the ts_base_addr/phy intialization.
  - Cleaned up the ingr/egr latencies definitons.
  - Fixed a comment about locking and the shared GPIO.
  - A few cosmetic fixes.

Since v2:
  - Removed explicit inlines from .c files.
  - Fixed three warnings.

Since v1:
  - Removed checks in rxtstamp/txtstamp as skb cannot be NULL here.
  - Reworked get_ptp_header_rx/get_ptp_header.
  - Reworked the locking logic between the PHC and timestamping
    operations.
  - Fixed a compilation issue on x86 reported by Jakub.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a description of the load/save GPIN pin, used in the
VSC8584 PHY for timestamping operations. The related pinctrl description
is also added.
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A new optional property can be used to reference the load/save GPIO,
used for PTP hardware clock (PHC) operations. This patch documents it in
the binding documentation.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for PHC and timestamping operations for the MSCC
PHY. PTP 1-step and 2-step modes are supported, over Ethernet and UDP.

To get and set the PHC time, a GPIO has to be used and changes are only
retrieved or committed when on a rising edge. The same GPIO is shared by
all PHYs, so the granularity of the lock protecting it has to be
different from the ones protecting the 1588 registers (the VSC8584 PHY
has 2 1588 blocks, and a single load/save pin).
Co-developed-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the first parts of the 1588 support in the MSCC PHY,
with registers definition and the 1588 block initialization.

Those PHYs are distributed in hardware packages containing multiple
times the PHY. The VSC8584 for example is composed of 4 PHYs. With
hardware packages, parts of the logic is usually common and one of the
PHY has to be used for some parts of the initialization. Following this
logic, the 1588 blocks of those PHYs are shared between two PHYs and
accessing the registers has to be done using the "base" PHY of the
group. This is handled thanks to helpers in the PTP code (and locks).
We also need the MDIO bus lock while performing a single read or write
to the 1588 registers as the read/write are composed of multiple MDIO
transactions (and we don't want other threads updating the page).
Co-developed-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch takes in account the use of the 1588 block in the MACsec
initialization, as a conditional configuration has to be done (when the
1588 block is used).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a define for the 0x8000 magic value used to perform
enable/disable actions on the "token ring clock". The patch is only
cosmetic.
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

All headers in the MSCC PHY driver have been copied and pasted from the
original mscc.c file. However the information is not necessarily
correct, as in the MACsec support. Fix this.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shared PHYs (PHYs in the same hardware package) may have shared
registers and their drivers would usually need to share information.
There is currently a way to have a shared (part of the) init, by using
phy_package_init_once(). This patch extends the logic to share parts of
the probe to allow sharing the initialization of locks or resources
retrieval.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rahul Lakkireddy says:

====================
cxgb4: fix more warnings reported by sparse

Patch 1 ensures all callers take on-chip memory lock when flashing
PHY firmware to fix lock context imbalance warnings.

Patch 2 moves all static arrays in header file to respective C file
in device dump collection path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>