- 29 Oct, 2015 18 commits
-
-
sumit.saxena@avagotech.com authored
It may happen (kdump), that an interrupt is invoked just after the setup_irqs function was called but before the tasklet was initialised. At this phase the hw ints should have been disabled, but for unknown reason this mechanism seems to not work properly. From: Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
sumit.saxena@avagotech.com authored
Signed-off-by:
Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by:
-
sumit.saxena@avagotech.com authored
Signed-off-by:
-
sumit.saxena@avagotech.com authored
Do not use PAGE_SIZE marco to calculate max_sectors per I/O request. Driver code assumes PAGE_SIZE will be always 4096 which can lead to wrongly calculated value if PAGE_SIZE is not 4096. This issue was reported in Ubuntu Bugzilla Bug #1475166. Cc: <stable@vger.kernel.org> Signed-off-by:
-
sumit.saxena@avagotech.com authored
Signed-off-by:
-
sumit.saxena@avagotech.com authored
Signed-off-by:
-
sumit.saxena@avagotech.com authored
Remove PCI id based checks and use instance->ctrl_context to decide whether controller is MFI-based or a Fusion adapter. Additionally, Fusion adapters are divided into two categories: Thunderbolt and Invader. Signed-off-by:
-
sumit.saxena@avagotech.com authored
Expose non-disk (TAPE drive, CD-ROM) unconditionally. Cc: <stable@vger.kernel.org> Signed-off-by:
-
sumit.saxena@avagotech.com authored
Signed-off-by:
-
sumit.saxena@avagotech.com authored
Some of these code changes were proposed by David Binderman. Removed redudant check of requestorId. Redundant condition: instance.requestorId. Check for plasma firmware 1.11 are now restructured to support only specific device id. Signed-off-by:
-
sumit.saxena@avagotech.com authored
Syncro firmware supports round robin I/O switching on dual path. Driver uses validHandles to check for dual path. However, it is supposed to check for values > 1 (not > 2). Signed-off-by:
-
sumit.saxena@avagotech.com authored
Print firmware events in human-readable form. This will help users track any critical firmware events without special application support. Sample syslogd output: megaraid_sas 0000:02:00.0: 8619 (491648347s/0x0020/WARN) - Controller temperature threshold exceeded. This may indicate inadequate system cooling. Switching to low performance mode. The format of logged events is: "<pci_dev_id>: <sequence_number> (<timestamp>/<locale>/<class>) - <description>" Signed-off-by:
-
sumit.saxena@avagotech.com authored
Fix the issue reported at: http://marc.info/?l=linux-scsi&m=143694494104544&w=2 Try to do chip reset at driver load time. If firmware fails to reach ready state, try chip reset using adp_reset() callback. For Fusion adapters the call back was previously void. Provide a suitable reset function. Signed-off-by:
-
sumit.saxena@avagotech.com authored
Driver will expose max sge = 256 (earlier it was 64) if firmware supports extended IO size (1M). Signed-off-by:
-
sumit.saxena@avagotech.com authored
Signed-off-by:
-
sumit.saxena@avagotech.com authored
Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by:
-
sumit.saxena@avagotech.com authored
Signed-off-by:
-
sumit.saxena@avagotech.com authored
Signed-off-by:
-
- 27 Oct, 2015 19 commits
-
-
Alan Stern authored
The "compatible" matching algorithm used for looking up old-style blacklist entries in a scsi_dev_info_list is buggy. The core of the algorithm looks like this: if (memcmp(devinfo->vendor, vendor, min(max, strlen(devinfo->vendor)))) /* not a match */ where max is the length of the device's vendor string after leading spaces have been removed but trailing spaces have not. Because of the min() computation, either entry could be a proper substring of the other and the code would still think that they match. In the case originally reported, the device's vendor and product strings were "Inateck " and " ". These matched against the following entry in the global device list: {"", "Scanner", "1.80", BLIST_NOLUN} because "" is a substring of "Inateck " and "" (the result of removing leading spaces from the device's product string) is a substring of "Scanner". The mistaken match prevented the system from scanning and finding the device's second Logical Unit. This patch fixes the problem by making two changes. First, the code for leading-space removal is hoisted out of the loop. (This means it will sometimes run unnecessarily, but since a large percentage of all lookups involve the "compatible" entries in global device list, this should be an overall improvement.) Second and more importantly, the patch removes trailing spaces and adds a check to verify that the two resulting strings are exactly the same length. This prevents matches where one entry is a proper substring of the other. Signed-off-by:Alan Stern <stern@rowland.harvard.edu> Reported-by:
Giulio Bernardi <ugilio@gmail.com> Tested-by:
James Bottomley <JBottomley@Odin.com>
-
Alan Stern authored
In drivers/scsi/scsi_devinfo.c, the scsi_dev_info_list_del_keyed() and scsi_get_device_flags_keyed() routines contain a large amount of duplicate code for finding vendor/product matches in a scsi_dev_info_list. This patch factors out the duplicate code and puts it in a separate function, scsi_dev_info_list_find(). Signed-off-by:
-
Maurizio Lombardi authored
the kernel prints some warnings when compiled with CONFIG_DMA_API_DEBUG. This is because the fnic driver doesn't check the return value of pci_map_single(). [ 11.942770] scsi host12: fnic [ 11.950811] ------------[ cut here ]------------ [ 11.950818] WARNING: at lib/dma-debug.c:937 check_unmap+0x47b/0x920() [ 11.950821] fnic 0000:0c:00.0: DMA-API: device driver failed to check map error[device address=0x0000002020a30040] [size=44 bytes] [mapped as single] Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed By: Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Ketan Mukadam authored
We would like to get the following updates in: Revert ownership to "Emulex" from "Avago Technologies" Signed-off-by:Ketan Mukadam <ketan.mukadam@avagotech.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Ketan Mukadam authored
Signed-off-by:
-
Shirish Pargaonkar authored
Do not log error for netevents that need no action such as NETDEV_REGISTER 0x0005, NETDEV_CHANGEADDR, and NETDEV_CHANGENAME. It results in logging error messages such as these [ 35.315872] bnx2fc: Unknown netevent 5 [ 35.315935] bnx2fc: Unknown netevent 8 [ 35.353866] bnx2fc: Unknown netevent 10 and generating bug reports. Remove logging this message as an ERROR instead of turning them into either DEBUG or INFO level messages. Signed-off-by:
Shirish Pargaonkar <spargaonkar@suse.com> Acked-by:
Eddie Wai <eddie.wai@broadcom.com> Acked-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
-
James Smart authored
Signed-off-by:
Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by:
James Smart <james.smart@avagotech.com> Signed-off-by:
-
James Smart authored
Initial link up defaults were not properly being tracked relative to initial FLOGI or pt2pt PLOGI. Add code to initialize them. Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
James Smart authored
Forgot to clear FCF Discovery in-progress flag upon FLOGI failures. Thus we didn't restart FLOGI. Signed-off-by:
-
James Smart authored
Fix for discovery failure in PT2PT when FLOGI's ELS ACC response gets aborted Change login state machine to: - Restart FLOGI if prior is ABTS'd - Reject incoming FLOGIs if we have one pending The above ensures that we always finish FLOGI processing, regardless of who initated FLOGI, before processing PLOGI's. Signed-off-by:
-
James Smart authored
Signed-off-by:
-
Ales Novak authored
lpfc_send_rscn_event() allocates data for sizeof(struct lpfc_rscn_event_header) + payload_len, but claims that the data has size of sizeof(struct lpfc_els_event_header) + payload_len. That leads to buffer overruns. Signed-off-by:
Ales Novak <alnovak@suse.cz> Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Sebastian Herbszt <herbszt@gmx.de> Signed-off-by:
-
Sebastian Herbszt authored
Remove set but not used variables. Signed-off-by:
-
Nicholas Krause authored
lpfc:Make the function lpfc_sli4_mbox_completions_pending static in order to comply with function prototype This makes the function lpfc_sli4_mbox_completion's definition static now in order to comply with its prototype being also declared as static too. Signed-off-by:
Nicholas Krause <xerofoify@gmail.com> Signed-off-by:
-
Ian Mitchell authored
This patch allows the LPFC to start up without a fatal kernel bug based on an exceeded KMALLOC_MAX_SIZE and a too large NR_CPU-based maskbits field. The bug was based on the number of CPU cores in a system. Using the get_cpu_mask() function declared in kernel/cpu.c allows the driver to load on the community kernel 4.2 RC1. Below is the kernel bug reproduced: 8<-------------------------------------------------------------------- 2199382.828437 ( 0.005216)| lpfc 0003:02:00.0: enabling device (0140 -> 0142) 2199382.999272 ( 0.170835)| ------------[ cut here ]------------ 2199382.999337 ( 0.000065)| WARNING: CPU: 84 PID: 404 at mm/slab_common.c:653 kmalloc_slab+0x2f/0x89() 2199383.004534 ( 0.005197)| Modules linked in: lpfc(+) usbcore(+) mptctl scsi_transport_fc sg lpc_ich i2c_i801 usb_common tpm_tis mfd_core tpm acpi_cpufreq button scsi_dh_alua scsi_dh_rdacusbcore: registered new device driver usb 2199383.020568 ( 0.016034)| 2199383.020581 ( 0.000013)| scsi_dh_hp_sw scsi_dh_emc scsi_dh gru thermal sata_nv processor piix fan thermal_sysehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 2199383.035288 ( 0.014707)| 2199383.035306 ( 0.000018)| hwmon ata_piix 2199383.035336 ( 0.000030)| CPU: 84 PID: 404 Comm: kworker/84:0 Not tainted 3.18.0-rc2-gat-00106-ga7ca10f2-dirty #178 2199383.047077 ( 0.011741)| ehci-pci: EHCI PCI platform driver 2199383.047134 ( 0.000057)| Hardware name: SGI UV2000/ROMLEY, BIOS SGI UV 2000/3000 series BIOS 01/15/2013 2199383.056245 ( 0.009111)| Workqueue: events work_for_cpu_fn 2199383.066174 ( 0.009929)| 000000000000028d ffff88eef827bbe8 ffffffff815a542f 000000000000028d 2199383.069545 ( 0.003371)| ffffffff810ea142 ffff88eef827bc28 ffffffff8104365c ffff88eefe4006c8 2199383.076214 ( 0.006669)| 0000000000000000 00000000000080d0 0000000000000000 0000000000000004 2199383.079213 ( 0.002999)| Call Trace: 2199383.084084 ( 0.004871)| [<ffffffff815a542f>] dump_stack+0x49/0x62 2199383.087283 ( 0.003199)| [<ffffffff810ea142>] ? kmalloc_slab+0x2f/0x89 2199383.091415 ( 0.004132)| [<ffffffff8104365c>] warn_slowpath_common+0x77/0x92 2199383.095197 ( 0.003782)| [<ffffffff8104368c>] warn_slowpath_null+0x15/0x17 2199383.103336 ( 0.008139)| [<ffffffff810ea142>] kmalloc_slab+0x2f/0x89 2199383.107082 ( 0.003746)| [<ffffffff8110fd9e>] __kmalloc+0x13/0x16a 2199383.112531 ( 0.005449)| [<ffffffffa01a8ed9>] lpfc_pci_probe_one_s4+0x105b/0x1644 [lpfc] 2199383.115316 ( 0.002785)| [<ffffffff81302b92>] ? pci_bus_read_config_dword+0x75/0x87 2199383.123431 ( 0.008115)| [<ffffffffa01a951f>] lpfc_pci_probe_one+0x5d/0xcb5 [lpfc] 2199383.127364 ( 0.003933)| [<ffffffff81497119>] ? dbs_check_cpu+0x168/0x177 2199383.136438 ( 0.009074)| [<ffffffff81496fa5>] ? gov_queue_work+0xb4/0xc0 2199383.140407 ( 0.003969)| [<ffffffff8130b2a1>] local_pci_probe+0x1e/0x52 2199383.143105 ( 0.002698)| [<ffffffff81052c47>] work_for_cpu_fn+0x13/0x1b 2199383.147315 ( 0.004210)| [<ffffffff81054965>] process_one_work+0x222/0x35e 2199383.151379 ( 0.004064)| [<ffffffff81054e76>] worker_thread+0x3d5/0x46e 2199383.159402 ( 0.008023)| [<ffffffff81054aa1>] ? process_one_work+0x35e/0x35e 2199383.163097 ( 0.003695)| [<ffffffff810599c6>] kthread+0xc8/0xd2 2199383.167476 ( 0.004379)| [<ffffffff810598fe>] ? kthread_freezable_should_stop+0x5b/0x5b 2199383.176434 ( 0.008958)| [<ffffffff815a8cac>] ret_from_fork+0x7c/0xb0 2199383.180086 ( 0.003652)| [<ffffffff810598fe>] ? kthread_freezable_should_stop+0x5b/0x5b 2199383.192333 ( 0.012247)| ehci-pci 0000:00:1a.0: EHCI Host Controller -------------------------------------------------------------------->8 The proposed solution was approved by James Smart at Emulex and tested on a UV2 machine with 6144 cores. With the fix, the LPFC module loads with no unwanted effects on the system. Signed-off-by:
Ian Mitchell <imitchell@sgi.com> Signed-off-by:
Alex Thorlton <athorlton@sgi.com> Suggested-by:
Robert Elliot <elliott@hp.com> [james.smart: resolve unused variable warning] Signed-off-by:
-
Johannes Thumshirn authored
Destroy lpfc_hba_index IDR on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: -
Bodo Stroesser authored
Currently the module parameter lpfc_sg_seg_count does not have effect for sli3 devices. In lpfc_sli_driver_resource_setup(), which is used for sli3, the code writes the configured sg_seg_cnt into lpfc_template.sg_tablesize. But lpfc_template is the template used for sli4 only. Thus the value should correctly be written to lpfc_template_s3->sg_tablesize. This patch is for kernel 4.1-rc5, but is tested with lpfc 10.2.405.26 only. Signed-off-by:
Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by:
-
Firo Yang authored
kzalloc() returns a void pointer - no need to cast it in drivers/scsi/lpfc/lpfc_init.c::lpfc_sli_driver_resource_setup() Signed-off-by:
Firo Yang <firogm@gmail.com> Signed-off-by:
-
Sebastian Herbszt authored
Remove trailing space from model description. Signed-off-by:
-
- 07 Oct, 2015 1 commit
-
-
Christoph Hellwig authored
3w controller don't dma map small single SGL entry commands but instead bounce buffer them. Add a helper to identify these commands and don't call scsi_dma_unmap for them. Based on an earlier patch from James Bottomley. Fixes: 118c85 ("3w-9xxx: fix command completion race") Reported-by:Tóth Attila <atoth@atoth.sote.hu> Tested-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
-
- 01 Oct, 2015 1 commit
-
-
Paul Mackerras authored
This fixes a bug in recent kernels which results in failure to boot on systems that have multipath SCSI disks. I observed this failure on a POWER8 server where all the disks are multipath SCSI disks. The symptoms are several messages like this on the console: [ 3.018700] device-mapper: table: 253:0: multipath: error attaching hardware handler [ 3.018828] device-mapper: ioctl: error adding target to table and the system does not find its disks, and therefore fails to boot. Bisection revealed that the bug was introduced in commit 566079c8, "dm-mpath, scsi_dh: request scsi_dh modules in scsi_dh, not dm-mpath". The specific reason for the failure is that where we previously loaded the "scsi_dh_alua" module, we are now trying to load the "alua" module, which doesn't exist. To fix this, we change the request_module call in scsi_dh_lookup() to prepend "scsi_dh_" to the name, just like the old code in drivers/md/dm-mpath.c:parse_hw_handler() used to do. [jejb: also fixes issue spotted by Sasha Levin that formatting characters could be passed in via sysfs and cause issues with request_module()] Fixes: 566079c8Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Cc: Sasha Levin <sasha.levin@oracle.com> Reviewed-by:
-
- 17 Sep, 2015 1 commit
-
-
Ariel Nahum authored
Connection last_ping is not being updated when iscsi_send_nopout fails. Not updating the last_ping will cause firing a timer to a past time (last_ping + ping_tmo < current_time) which triggers an infinite loop of iscsi_check_transport_timeouts() and hogs the cpu. Fix this issue by checking the return value of iscsi_send_nopout. If it fails set the next_timeout to one second later. Signed-off-by:
Ariel Nahum <arieln@mellanox.com> Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Reviewed-by:
-
