- 12 Oct, 2012 4 commits
-
-
Daniel Vetter authored
It doesn't work since the gtt pte range sits in the middle of the mmio bar. We didn't notice that since both my and Chris' gen2 machines don't support PAT and hence all wc io mapping request will automatically be demoted to uc. This regression has been introduce in commit edef7e68 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Sep 14 11:57:47 2012 +0100 agp/intel: Use a write-combining map for updating PTEs Reported-by:
Egbert Eich <eich@pdx.freedesktop.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55834Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
Note that just because we have n == MAX elements left, does not imply that there are only MAX elements left in the scatterlist and so we may not be on the last chain, and the nth element may in fact be a chain ptr. This is exercised by the improved hangman tests and the gem_exec_big test in i-g-t. This regression has been introduced in commit 9da3da66 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jun 1 15:20:22 2012 +0100 drm/i915: Replace the array of pages with a scatterlist v2: KISS, replace the direct lookup with a for_each_sg() [danvet] v3: Try to be clever again. Signed-off-by:
-
Chris Wilson authored
The intention was to allow the caller to avoid a failure to queue a request having already written commands to the ring. However, this is a moot point as the i915_add_request() can fail for other reasons than a mere allocation failure and those failure cases are more likely than ENOMEM. So the overlay code already had to handle i915_add_request() failures, and due to commit 3bb73aba Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jul 20 12:40:59 2012 +0100 drm/i915: Allow late allocation of request for i915_add_request() the error handling code in intel_overlay.c was subject to causing double-frees, as found by coverity. Rather than further complicate i915_add_request() and callers, realise the battle is lost and adapt intel_overlay.c to take advantage of the late allocation of requests. v2: Handle callers passing in a NULL seqno. v3: Ditto. This time for sure. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Kenneth Graunke authored
A previous patch, namely: commit bf97b276 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Apr 11 20:42:41 2012 +0200 drm/i915: implement w/a for incorrect guarband clipping accidentally set bit 5 in 3D_CHICKEN, which has nothing to do with clipping. This patch changes it to be set in 3D_CHICKEN3, where it belongs. The game "Dante" demonstrates random clipping issues when guardband clipping is enabled and bit 5 of 3D_CHICKEN3 isn't set. So the workaround is actually necessary. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Oliver McFadden <oliver.mcfadden@linux.intel.com> Acked-by:
Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by:
Kenneth Graunke <kenneth@whitecape.org> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 08 Oct, 2012 1 commit
-
-
Daniel Vetter authored
I've discovered this on my ivb machine while stress-testing the new flip_tests. Only harmful effect observed is that the timestamp is a bit bogus. Note that this is empirical duct-tape: I've noticed that we seem to only ever miss the very first vblank irq right after enabling the pipe. And with this hack applied I couldn't reproduce the failure case anywhere else any more. Tested-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
- 07 Oct, 2012 1 commit
-
-
Willy Tarreau authored
starting an old X server causes a kernel BUG since commit 1b50247a: ------------[ cut here ]------------ kernel BUG at drivers/gpu/drm/i915/i915_gem.c:3661! invalid opcode: 0000 [#1] SMP Modules linked in: snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss uvcvideo +videobuf2_core videodev videobuf2_vmalloc videobuf2_memops uhci_hcd ath9k mac80211 snd_hda_codec_realtek ath9k_common microcode +ath9k_hw psmouse serio_raw sg ath cfg80211 atl1c lpc_ich mfd_core ehci_hcd snd_hda_intel snd_hda_codec snd_hwdep snd_pcm rtc_cmos +snd_timer snd evdev eeepc_laptop snd_page_alloc sparse_keymap Pid: 2866, comm: X Not tainted 3.5.6-rc1-eeepc #1 ASUSTeK Computer INC. 1005HA/1005HA EIP: 0060:[<c12dc291>] EFLAGS: 00013297 CPU: 0 EIP is at i915_gem_entervt_ioctl+0xf1/0x110 EAX: f5941df4 EBX: f5940000 ECX: 00000000 EDX: 00020000 ESI: f5835400 EDI: 00000000 EBP: f51d7e38 ESP: f51d7e20 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: b760e0a0 CR3: 351b6000 CR4: 000007d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process X (pid: 2866, ti=f51d6000 task=f61af8d0 task.ti=f51d6000) Stack: 00000001 00000000 f5835414 f51d7e84 f5835400 f54f85c0 f51d7f10 c12b530b 00000001 c151b139 c14751b6 c152e030 00000b32 00006459 00000059 0000e200 00000001 00000000 00006459 c159ddd0 c12dc1a0 ffffffea 00000000 00000000 Call Trace: [<c12b530b>] drm_ioctl+0x2eb/0x440 [<c12dc1a0>] ? i915_gem_init+0xe0/0xe0 [<c1052b2b>] ? enqueue_hrtimer+0x1b/0x50 [<c1053321>] ? __hrtimer_start_range_ns+0x161/0x330 [<c10530b3>] ? lock_hrtimer_base+0x23/0x50 [<c1053163>] ? hrtimer_try_to_cancel+0x33/0x70 [<c12b5020>] ? drm_version+0x90/0x90 [<c10ca171>] vfs_ioctl+0x31/0x50 [<c10ca2e4>] do_vfs_ioctl+0x64/0x510 [<c10535de>] ? hrtimer_nanosleep+0x8e/0x100 [<c1052c20>] ? update_rmtp+0x80/0x80 [<c10ca7c9>] sys_ioctl+0x39/0x60 [<c1433949>] syscall_call+0x7/0xb Code: 83 c4 0c 5b 5e 5f 5d c3 c7 44 24 04 2c 05 53 c1 c7 04 24 6f ef 47 c1 e8 6e e0 fd ff c7 83 38 1e 00 00 00 00 00 00 e9 3f ff ff +ff <0f> 0b eb fe 0f 0b eb fe 8d b4 26 00 00 00 00 0f 0b eb fe 8d b6 EIP: [<c12dc291>] i915_gem_entervt_ioctl+0xf1/0x110 SS:ESP 0068:f51d7e20 ---[ end trace dd332ec083cbd513 ]--- The crash happens here in i915_gem_entervt_ioctl() : 3659 BUG_ON(!list_empty(&dev_priv->mm.active_list)); 3660 BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); -> 3661 BUG_ON(!list_empty(&dev_priv->mm.inactive_list)); 3662 mutex_unlock(&dev->struct_mutex); Quoting Chris : "That BUG_ON there is silly and can simply be removed. The check is to verify that no batches were submitted to the kernel whilst the UMS/GEM client was suspended - to which the BUG_ONs are a crude approximation. Furthermore, the checks are too late, since it means we attempted to program the hardware whilst it was in an invalid state, the BUG_ONs are the least of your concerns at that point." Note that this regression has been introduced in commit 1b50247a Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Apr 24 15:47:30 2012 +0100 drm/i915: Remove the list of pinned inactive objects Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Willy Tarreau <w@1wt.eu> [danvet: Added note about the regressing commit and cc: stable.] Cc: stable@vger.kernel.org Signed-off-by:
-
- 04 Oct, 2012 6 commits
-
-
Ben Widawsky authored
I can't even find how I figured this might be needed anymore. But sure enough, the value I'm reading back on platforms doesn't match what the docs recommends. It seemed to fix Chris' GT1 in limited testing as well. Tested-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Daniel Vetter authored
Now that we correctly generate it, this hack is no longer required (and might actually paper over a serious bug). pageflip timestamps are sanity check in the latest version of the flip-test in intel-gpu-tools. v2: Also remove the gettimeofday(&now) which is no longer used. Noticed by Mario Kleiner. Reviewed-by: mario.kleiner@tuebingen.mpg.de Tested-by:
-
Daniel Vetter authored
... since finish_page_flip needs the vblank timestamp generated in drm_handle_vblank. Somehow all the gmch platforms get it right, but all the pch platform irq handlers get is wrong. Hooray for copy& pasting! Currently this gets papered over by a gross hack in finish_page_flip. A second patch will remove that. Note that without this, the new timestamp sanity checks in flip_test occasionally get tripped up, hence the cc: stable tag. Cc: stable@vger.kernel.org Reviewed-by: mario.kleiner@tuebingen.mpg.de Tested-by:
-
Mika Kuoppala authored
Falling into default case in vmi915_gem_fault is a bug. Be more verbose about it. Signed-off-by:
-
Dmitry Rogozhkin authored
Subsequent threads returning EBUSY from vm_insert_pfn() was not handled correctly. As a result concurrent access from new threads to mmapped data caused SIGBUS. Note that this fixes i-g-t/tests/gem_threaded_tiled_access. Tested-by:
Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Reviewed-by:
-
Chris Wilson authored
In commit cdb0e95b Author: Keith Packard <keithp@keithp.com> Date: Tue Nov 1 20:00:06 2011 -0700 drm/i915: Try harder during dp pattern 1 link training extra passes were made to retry the same voltage and then retry a full clock reset. However, as coverity pointed out, we never tried the full clock reset as we broke out of the loop early. Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
- 03 Oct, 2012 1 commit
-
-
Jesse Barnes authored
We don't have bit 6 swizzling on VLV, so this function is easy. Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
- 02 Oct, 2012 8 commits
-
-
Adam Jackson authored
Signed-off-by:
Adam Jackson <ajax@redhat.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Adam Jackson authored
Note with a comment anything newer than DP 1.1a. Obviously this needs some work still... Signed-off-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Adam Jackson authored
If there's no downstream device, DPCD success is good enough. If there's a hotplug-capable downstream device, count the number of connected sinks in DP_SINK_STATUS and return success if it's non-zero. Otherwise, probe DDC and report appropriately. v2: Check DP_SINK_STATUS instead of something unrelated to sink status. Tested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Adam Jackson authored
v2: Fix parenthesis mismatch, spotted by Jani Nikula Tested-by:
-
Adam Jackson authored
Sources: DP, eDP, and DP interop specs, and a VESA slideshow about DP 1.2 for the MST bits. Tested-by:
-
Adam Jackson authored
Tested-by:
-
Chris Wilson authored
This was meant to be the purpose of the intel_crtc_wait_for_pending_flips() function which is called whilst preparing the CRTC for a modeset or before disabling. However, as Ville Syrjala pointed out, we set the pending flip notification on the old framebuffer that is no longer attached to the CRTC by the time we come to flush the pending operations. Instead, we can simply wait on the pending unpin work to be finished on this CRTC, knowning that the hardware has therefore finished modifying the registers, before proceeding with our direct access. Fixes i-g-t/flip_test on non-pch platforms. pch platforms simply schedule the flip immediately when the pipe is disabled, leading to other funny issues. Signed-off-by:
-
Chris Wilson authored
A side-effect of commit 7d54a904 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Aug 10 10:18:10 2012 +0100 drm/i915: Apply post-sync write for pipe control invalidates was that only a request to emit invalidate flush would result in the TLB being invalidated (since it requires synchronisation and so incurs a performance penalty). However, the stated w/a for hardware contexts is that the TLBs must be invalidated prior to a MI_SET_CONTEXT, yet the w/a itself did not request the TLBs to be invalidated... Note this w/a does not prevent the hard system hang I experience when using hw contexts (with rc6 enabled) on SNB GT1. Signed-off-by:
-
- 27 Sep, 2012 2 commits
-
-
Ben Widawsky authored
On the EINVAL case we don't release struct_mutex. It should be safe to grab the lock after checking the parameters, which also resolves the issues. Signed-off-by:
-
Jani Nikula authored
The dithering introduced in commit 3b5c78a3 Author: Adam Jackson <ajax@redhat.com> Date: Tue Dec 13 15:41:00 2011 -0800 drm/i915/dp: Dither down to 6bpc if it makes the mode fit stores the INTEL_MODE_DP_FORCE_6BPC flag in the private_flags of the adjusted mode, while i9xx_crtc_mode_set() and ironlake_crtc_mode_set() use the original mode, without the flag, so it would never have any effect. However, the BPC was clamped by VBT settings, making things work by coincidence, until that part was removed in commit 4344b813 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Aug 10 11:10:20 2012 +0200 Use adjusted_mode instead of mode when checking for INTEL_MODE_DP_FORCE_6BPC to make the flag have effect. v2: Don't forget to fix this in i9xx_crtc_mode_set() also, pointed out by Daniel both before and after sending the first patch. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47621 CC: Adam Jackson <ajax@redhat.com> CC: stable@vger.kernel.org Signed-off-by:
-
- 26 Sep, 2012 3 commits
-
-
Chris Wilson authored
Finishes commit 02d71956 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Aug 9 16:44:54 2012 +0200 drm/i915: properly guard ilk ips state The core functions were annotated with their locking requirements, but we overlooked that they were exported, without any control over the locking, to debugfs. So in order to enable debugfs to read the registers without triggering sanity checks, we change the exported entry points to properly take the required locks before calling the core routines. Reported-by:
yangguang <guang.a.yang@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55304Signed-off-by:
-
Ben Widawsky authored
Signed-off-by:
-
Paulo Zanoni authored
... even if the actual infoframe is smaller than the maximum possible size. If we don't write all the 32 DIP data bytes the InfoFrame ECC may not be correctly calculated in some cases (e.g., when changing the port), and this will lead to black screens on HDMI monitors. The ECC value is generated by the hardware. I don't see how this should break anything since we're writing 0 and that should be the correct value, so this patch should be safe. Notice that on IVB and older we actually have 64 bytes available for VIDEO_DIP_DATA, but only bytes 0-31 actually store infoframe data: the others are either read-only ECC values or marked as "reserved". On HSW we only have 32 bytes, and the ECC value is stored on its own separate read-only register. See BSpec. This patch fixes bug #46761, which is marked as a regression introduced by commit 4e89ee17: drm/i915: set the DIP port on ibx_write_infoframe Before commit 4e89 we were just failing to send AVI infoframes when we needed to change the port, which can lead to black screens in some cases. After commit 4e89 we started sending infoframes, but with a possibly wrong ECC value. After this patch I hope we start sending correct infoframes. Version 2: - Improve commit message - Try to make the code more clear Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46761Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by:
-
- 24 Sep, 2012 3 commits
-
-
Daniel Vetter authored
Manual backmerge of -rc7 to resolve a silent conflict leading to compile failure in drivers/gpu/drm/i915/intel_hdmi.c. This is due to the bugfix in -rc7: commit b98b6016 Author: Wang Xingchao <xingchao.wang@intel.com> Date: Thu Sep 13 07:43:22 2012 +0800 drm/i915: HDMI - Clear Audio Enable bit for Hot Plug Since this code moved around a lot in -next git put that snippet at the wrong spot. I've tried to fix this by making the conflict explicit by merging a version for next with: commit 3cce574f Author: Wang Xingchao <xingchao.wang@intel.com> Date: Thu Sep 13 11:19:00 2012 +0800 drm/i915: HDMI - Clear Audio Enable bit for Hot Plug unconditionally But that failed to solve the entire problem. To avoid pushing out further -nightly branch to our QA where this is broken, do the backmerge and manually add the stuff git adds to -next from the patch in -fixes. Note that this doesn't show up in git's merge diff (and hence is also not handled by git rerere), which adds to the reasons why I'd like to fix this with a verbose backmerge. The git merge diff only shows a bunch of trivial conflicts of the "code changed in lines next to each another" kind. Signed-off-by:
-
Paulo Zanoni authored
This should never happen, but the silent "return" makes me wonder every time I try to debug InfoFrame bugs, so promote this to BUG() to make sure people will complain if we ever break this. Signed-off-by:
-
Linus Torvalds authored
-
- 23 Sep, 2012 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull kbuild fixes from Michal Marek: "There are two more kbuild fixes for 3.6. One fixes a race between x86's archscripts target and the rule (re)building scripts/basic/fixdep. The second is a fix for the previous attempt at fixing make firmware_install with make 3.82. This new solution should work with any version of GNU make" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: x86/kbuild: archscripts depends on scripts_basic firmware: fix directory creation rule matching with make 3.80
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
Pull hwmon subsystem fixes from Jean Delvare. * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (fam15h_power) Tweak runavg_range on resume hwmon: (coretemp) Use get_online_cpus to avoid races involving CPU hotplug hwmon: (via-cputemp) Use get_online_cpus to avoid races involving CPU hotplug
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of four essential fixes: two oops related (bnx2i, virtio-scsi), one data corruption related (hpsa) and one failure to boot due to interrupt routing issues (mpt2ss). Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] hpsa: fix handling of protocol error [SCSI] mpt2sas: Fix for issue - Unable to boot from the drive connected to HBA [SCSI] bnx2i: Fixed NULL ptr deference for 1G bnx2 Linux iSCSI offload [SCSI] scsi: virtio-scsi: Fix address translation failure of HighMem pages used by sg list
-
Shaun Ruffell authored
Fix potential NULL pointer dereference in edac_unregister_sysfs() on system boot introduced in 3.6-rc1. Since commit 7a623c03 ("edac: rewrite the sysfs code to use struct device") edac_mc_alloc() no longer initializes embedded kobjects in struct mem_ctl_info. Therefore edac_mc_free() can no longer simply decrement a kobject reference count to free the allocated memory unless the memory controller driver module had also called edac_mc_add_mc(). Now edac_mc_free() will check if the newly embedded struct device has been registered with sysfs before using either the standard device release functions or freeing the data structures itself with logic pulled out of the error path of edac_mc_alloc(). The BUG this patch resolves for me: BUG: unable to handle kernel NULL pointer dereference at (null) EIP is at __wake_up_common+0x1a/0x6a Process modprobe (pid: 933, ti=f3dc6000 task=f3db9520 task.ti=f3dc6000) Call Trace: complete_all+0x3f/0x50 device_pm_remove+0x23/0xa2 device_del+0x34/0x142 edac_unregister_sysfs+0x3b/0x5c [edac_core] edac_mc_free+0x29/0x2f [edac_core] e7xxx_probe1+0x268/0x311 [e7xxx_edac] e7xxx_init_one+0x56/0x61 [e7xxx_edac] local_pci_probe+0x13/0x15 ... Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by:
Shaun Ruffell <sruffell@digium.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Fengguang Wu authored
coccinelle warns about: + drivers/edac/edac_mc.c:429:9-23: ERROR: reference preceded by free on line 429 421 if (mci->csrows) { > 422 for (chn = 0; chn < tot_channels; chn++) { 423 csr = mci->csrows[chn]; 424 if (csr) { > 425 for (chn = 0; chn < tot_channels; chn++) 426 kfree(csr->channels[chn]); 427 kfree(csr); 428 } > 429 kfree(mci->csrows[i]); 430 } 431 kfree(mci->csrows); 432 } and that code block seem to mess things up in several ways (double free, memory leak, out-of-bound reads etc.): L422: The iterator "chn" and bound "tot_channels" are totally wrong. Should be "row" and "tot_csrows" respectively. Which means either memory leak, or out-of-bound reads (which if does not trigger an immediate page fault error, will further lead to kfree() on random addresses). L425: The inner loop is reusing the same iterator "chn" as the outer loop, which could lead to premature end of the outer loop, and hence memory leak. L429: The array index 'i' in mci->csrows[i] is a temporary value used in previous loops, and won't change at all in the current loop. Which means either out-of-bound read and possibly kfree(random number), or the same mci->csrows[i] get freed once and again, and possibly double free for the kfree(csr) in L427. L426/L427: a kfree(csr->channels) is needed in between to avoid leaking the memory. The buggy code was introduced by commit de3910eb ("edac: change the mem allocation scheme to make Documentation/kobject.txt happy") in the 3.6-rc1 merge window. Fix it by freeing up resources in this order: free csrows[i]->channels[j] free csrows[i]->channels free csrows[i] free csrows CC: Mauro Carvalho Chehab <mchehab@redhat.com> CC: Shaun Ruffell <sruffell@digium.com> Signed-off-by:Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Andreas Herrmann authored
The quirk introduced with commit 00250ec9 (hwmon: fam15h_power: fix bogus values with current BIOSes) is not only required during driver load but also when system resumes from suspend. The BIOS might set the previously recommended (but unsuitable) initilization value for the running average range register during resume. Signed-off-by:
Andreas Herrmann <andreas.herrmann3@amd.com> Tested-by:
Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org # 3.0+
-
Silas Boyd-Wickizer authored
coretemp_init loops with for_each_online_cpu, adding platform_devices and sysfs interfaces, then calls register_hotcpu_notifier. There is a race if a CPU is offlined or onlined after the loop, but before register_hotcpu_notifier. The race might result in the absence of a platform_device+sysfs interface for an online CPU, or the presence of a platform_device+sysfs interface for an offline CPU. A similar race occurs during coretemp_exit, after the module calls unregister_hotcpu_notifier, but before it unregisters all devices, a CPU might offline and a device for an offline CPU will exist for a short while. This fix surrounds for_each_online_cpu and register_hotcpu_notifier with get_online_cpus+put_online_cpus; and surrounds unregister_hotcpu_notifier and device unregistering with get_online_cpus+put_online_cpus. Build tested. Signed-off-by:
Silas Boyd-Wickizer <sbw@mit.edu> Signed-off-by:
-
Silas Boyd-Wickizer authored
via_cputemp_init loops with for_each_online_cpu, adding platform_devices, then calls register_hotcpu_notifier. If a CPU is offlined between the loop and register_hotcpu_notifier, then later onlined, via_cputemp_device_add will attempt to add platform devices with the same ID. A similar race occurs during via_cputemp_exit, after the module calls unregister_hotcpu_notifier, a CPU might offline and a device will exist for a CPU that is offline. This fix surrounds for_each_online_cpu and register_hotcpu_notifier with get_online_cpus+put_online_cpus; and surrounds unregister_hotcpu_notifier and device unregistering with get_online_cpus+put_online_cpus. Build tested. Signed-off-by:
Harald Welte <laforge@gnumonks.org> Signed-off-by:
-
- 22 Sep, 2012 3 commits
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "Random fixes across arch/mips, essentially. One fix for an issue in get_user_pages_fast() which previously was discovered on x86, a miscalculation in the support for the MIPS MT hardware multithreading support, the RTC support for the Malta and a fix for a spurious interrupt issue that seems to bite only very special Malta configurations." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Malta: Don't crash on spurious interrupt. MIPS: Malta: Remove RTC Data Mode bootstrap breakage MIPS: mm: Add compound tail page _mapcount when mapped MIPS: CMP/SMTC: Fix tc_id calculation
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM and clkdev fixes from Russell King: "Two patches for clkdev which resolve the long standing issue that the devm_* versions were dependent on clkdev, which they shouldn't have been. Instead, they're dependent on HAVE_CLK instead, which implies that you're providing clk_get() and clk_put(). A small fix to the ARM decompressor to ensure that the page tables are properly interpreted by the CPU, and reserve syscall 378 for kcmp (the checksyscalls.sh script is unfortunately currently broken so arch maintainers aren't getting notified of new syscalls...) Lastly, a larger fix for an issue between the common clk subsystem and smp_twd which causes warnings to be spat out." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: reserve syscall 378 for kcmp ARM: 7535/1: Reprogram smp_twd based on new common clk framework notifiers ARM: 7537/1: clk: Fix release in devm_clk_put() ARM: 7532/1: decompressor: reset SCTLR.TRE for VMSA ARMv7 cores ARM: 7534/1: clk: Make the managed clk functions generically available
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: "The most important fix is Logitech Unifying receiver regression in device enumeration fix from Nestor Lopez Casado. In addition to that, there is a small memory leak fix for Thinkpad keyboard driver from Axel Lin." * 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Fix logitech-dj: missing Unifying device issue HID: lenovo-tpkbd: Fix memory leak in tpkbd_remove_tp()
-
