- 03 Jun, 2015 34 commits
-
-
Michael Brunner authored
commit f230e8ff upstream. This patch fixes an inverted return value of the gpio get_direction function. The wrong value causes the direction sysfs entry and GPIO debugfs file to indicate incorrect GPIO direction settings. In some cases it also prevents setting GPIO output values. The problem is also present in all other stable kernel versions since linux-3.12. Reported-by:
Jochen Henneberg <jh@henneberg-systemdesign.com> Signed-off-by:
Michael Brunner <michael.brunner@kontron.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Scott Branden authored
commit ea345c14 upstream. Add the USB Id to link the D-Link DWA 130 USB Wifi adapter to the rt2830 driver. Signed-off-by:
Scott Branden <sbranden@broadcom.com> Signed-off-by:
Pieter Truter <ptruter@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Gabriele Mazzotta authored
commit 09c5b480 upstream. When the LPM policy is set to ATA_LPM_MAX_POWER, the device might generate a spurious PHY event that cuases errors on the link. Ignore this event if it occured within 10s after the policy change. The timeout was chosen observing that on a Dell XPS13 9333 these spurious events can occur up to roughly 6s after the policy change. Link: http://lkml.kernel.org/g/3352987.ugV1Ipy7Z5@xps13Signed-off-by:
Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Gabriele Mazzotta authored
commit 8393b811 upstream. This is a preparation commit that will allow to add other criteria according to which PHY events should be dropped. Signed-off-by:
-
Darrick J. Wong authored
commit e531d0bc upstream. The journal revoke block recovery code does not check r_count for sanity, which means that an evil value of r_count could result in the kernel reading off the end of the revoke table and into whatever garbage lies beyond. This could crash the kernel, so fix that. However, in testing this fix, I discovered that the code to write out the revoke tables also was not correctly checking to see if the block was full -- the current offset check is fine so long as the revoke table space size is a multiple of the record size, but this is not true when either journal_csum_v[23] are set. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Eryu Guan authored
commit 2f974865 upstream. The following commit introduced a bug when checking for zero length extent 5946d089 ext4: check for overlapping extents in ext4_valid_extent_entries() Zero length extent could pass the check if lblock is zero. Adding the explicit check for zero length back. Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
-
Lukas Czerner authored
commit 9d506594 upstream. Currently when journal restart fails, we'll have the h_transaction of the handle set to NULL to indicate that the handle has been effectively aborted. We handle this situation quietly in the jbd2_journal_stop() and just free the handle and exit because everything else has been done before we attempted (and failed) to restart the journal. Unfortunately there are a number of problems with that approach introduced with commit 41a5b913 "jbd2: invalidate handle if jbd2_journal_restart() fails" First of all in ext4 jbd2_journal_stop() will be called through __ext4_journal_stop() where we would try to get a hold of the superblock by dereferencing h_transaction which in this case would lead to NULL pointer dereference and crash. In addition we're going to free the handle regardless of the refcount which is bad as well, because others up the call chain will still reference the handle so we might potentially reference already freed memory. Moreover it's expected that we'll get aborted handle as well as detached handle in some of the journalling function as the error propagates up the stack, so it's unnecessary to call WARN_ON every time we get detached handle. And finally we might leak some memory by forgetting to free reserved handle in jbd2_journal_stop() in the case where handle was detached from the transaction (h_transaction is NULL). Fix the NULL pointer dereference in __ext4_journal_stop() by just calling jbd2_journal_stop() quietly as suggested by Jan Kara. Also fix the potential memory leak in jbd2_journal_stop() and use proper handle refcounting before we attempt to free it to avoid use-after-free issues. And finally remove all WARN_ON(!transaction) from the code so that we do not get random traces when something goes wrong because when journal restart fails we will get to some of those functions. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
-
Ludovic Desroches authored
commit 60c8f783 upstream. clkdiv is declared as an u32 but it can be set to a negative value causing a huge divisor value. Change its type to int to avoid this case. Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Anton Blanchard authored
commit 5e95235c upstream. Recent toolchains force the TOC to be 256 byte aligned. We need to enforce this alignment in our linker script, otherwise pointers to our TOC variables (__toc_start, __prom_init_toc_start) could be incorrect. If they are bad, we die a few hundred instructions into boot. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Krzysztof Opasiak authored
commit 903124fe upstream. memset() to 0 interfaces array before reusing usb_configuration structure. This commit fix bug: ln -s functions/acm.1 configs/c.1 ln -s functions/acm.2 configs/c.1 ln -s functions/acm.3 configs/c.1 echo "UDC name" > UDC echo "" > UDC rm configs/c.1/acm.* rmdir functions/* mkdir functions/ecm.usb0 ln -s functions/ecm.usb0 configs/c.1 echo "UDC name" > UDC [ 82.220969] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 82.229009] pgd = c0004000 [ 82.231698] [00000000] *pgd=00000000 [ 82.235260] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 82.240638] Modules linked in: [ 82.243681] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.0.0-rc2 #39 [ 82.249926] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 82.256003] task: c07cd2f0 ti: c07c8000 task.ti: c07c8000 [ 82.261393] PC is at composite_setup+0xe3c/0x1674 [ 82.266073] LR is at composite_setup+0xf20/0x1674 [ 82.270760] pc : [<c03510d4>] lr : [<c03511b8>] psr: 600001d3 [ 82.270760] sp : c07c9df0 ip : c0806448 fp : ed8c9c9c [ 82.282216] r10: 00000001 r9 : 00000000 r8 : edaae918 [ 82.287425] r7 : ed551cc0 r6 : 00007fff r5 : 00000000 r4 : ed799634 [ 82.293934] r3 : 00000003 r2 : 00010002 r1 : edaae918 r0 : 0000002e [ 82.300446] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 82.307910] Control: 10c5387d Table: 6bc1804a DAC: 00000015 [ 82.313638] Process swapper/0 (pid: 0, stack limit = 0xc07c8210) [ 82.319627] Stack: (0xc07c9df0 to 0xc07ca000) [ 82.323969] 9de0: 00000000 c06e65f4 00000000 c07c9f68 [ 82.332130] 9e00: 00000067 c07c59ac 000003f7 edaae918 ed8c9c98 ed799690 eca2f140 200001d3 [ 82.340289] 9e20: ee79a2d8 c07c9e88 c07c5304 ffff55db 00010002 edaae810 edaae860 eda96d50 [ 82.348448] 9e40: 00000009 ee264510 00000007 c07ca444 edaae860 c0340890 c0827a40 ffff55e0 [ 82.356607] 9e60: c0827a40 eda96e40 ee264510 edaae810 00000000 edaae860 00000007 c07ca444 [ 82.364766] 9e80: edaae860 c0354170 c03407dc c033db4c edaae810 00000000 00000000 00000010 [ 82.372925] 9ea0: 00000032 c0341670 00000000 00000000 00000001 eda96e00 00000000 00000000 [ 82.381084] 9ec0: 00000000 00000032 c0803a23 ee1aa840 00000001 c005d54c 249e2450 00000000 [ 82.389244] 9ee0: 200001d3 ee1aa840 ee1aa8a0 ed84f4c0 00000000 c07c9f68 00000067 c07c59ac [ 82.397403] 9f00: 00000000 c005d688 ee1aa840 ee1aa8a0 c07db4b4 c006009c 00000032 00000000 [ 82.405562] 9f20: 00000001 c005ce20 c07c59ac c005cf34 f002000c c07ca780 c07c9f68 00000057 [ 82.413722] 9f40: f0020000 413fc090 00000001 c00086b4 c000f804 60000053 ffffffff c07c9f9c [ 82.421880] 9f60: c0803a20 c0011fc0 00000000 00000000 c07c9fb8 c001bee0 c07ca4f0 c057004c [ 82.430040] 9f80: c07ca4fc c0803a20 c0803a20 413fc090 00000001 00000000 01000000 c07c9fb0 [ 82.438199] 9fa0: c000f800 c000f804 60000053 ffffffff 00000000 c0050e70 c0803bc0 c0783bd8 [ 82.446358] 9fc0: ffffffff ffffffff c0783664 00000000 00000000 c07b13e8 00000000 c0803e54 [ 82.454517] 9fe0: c07ca480 c07b13e4 c07ce40c 4000406a 00000000 40008074 00000000 00000000 [ 82.462689] [<c03510d4>] (composite_setup) from [<c0340890>] (s3c_hsotg_complete_setup+0xb4/0x418) [ 82.471626] [<c0340890>] (s3c_hsotg_complete_setup) from [<c0354170>] (usb_gadget_giveback_request+0xc/0x10) [ 82.481429] [<c0354170>] (usb_gadget_giveback_request) from [<c033db4c>] (s3c_hsotg_complete_request+0xcc/0x12c) [ 82.491583] [<c033db4c>] (s3c_hsotg_complete_request) from [<c0341670>] (s3c_hsotg_irq+0x4fc/0x558) [ 82.500614] [<c0341670>] (s3c_hsotg_irq) from [<c005d54c>] (handle_irq_event_percpu+0x50/0x150) [ 82.509291] [<c005d54c>] (handle_irq_event_percpu) from [<c005d688>] (handle_irq_event+0x3c/0x5c) [ 82.518145] [<c005d688>] (handle_irq_event) from [<c006009c>] (handle_fasteoi_irq+0xd4/0x18c) [ 82.526650] [<c006009c>] (handle_fasteoi_irq) from [<c005ce20>] (generic_handle_irq+0x20/0x30) [ 82.535242] [<c005ce20>] (generic_handle_irq) from [<c005cf34>] (__handle_domain_irq+0x6c/0xdc) [ 82.543923] [<c005cf34>] (__handle_domain_irq) from [<c00086b4>] (gic_handle_irq+0x2c/0x6c) [ 82.552256] [<c00086b4>] (gic_handle_irq) from [<c0011fc0>] (__irq_svc+0x40/0x74) [ 82.559716] Exception stack(0xc07c9f68 to 0xc07c9fb0) [ 82.564753] 9f60: 00000000 00000000 c07c9fb8 c001bee0 c07ca4f0 c057004c [ 82.572913] 9f80: c07ca4fc c0803a20 c0803a20 413fc090 00000001 00000000 01000000 c07c9fb0 [ 82.581069] 9fa0: c000f800 c000f804 60000053 ffffffff [ 82.586113] [<c0011fc0>] (__irq_svc) from [<c000f804>] (arch_cpu_idle+0x30/0x3c) [ 82.593491] [<c000f804>] (arch_cpu_idle) from [<c0050e70>] (cpu_startup_entry+0x128/0x1a4) [ 82.601740] [<c0050e70>] (cpu_startup_entry) from [<c0783bd8>] (start_kernel+0x350/0x3bc) [ 82.609890] Code: 0a000002 e3530005 05975010 15975008 (e5953000) [ 82.615965] ---[ end trace f57d5f599a5f1bfa ]--- Most of kernel code assume that interface array in struct usb_configuration is NULL terminated. When gadget is composed with configfs configuration structure may be reused for different functions set. This bug happens because purge_configs_funcs() sets only next_interface_id to 0. Interface array still contains pointers to already freed interfaces. If in second try we add less interfaces than earlier we may access unallocated memory when trying to get interface descriptors. Signed-off-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Hans de Goede authored
commit 17211509 upstream. Without this flag some versions of these enclosures do not work. Reported-and-tested-by:
Christian Schaller <cschalle@redhat.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Mark Edwards authored
commit c735ed74 upstream. Added the USB serial console device ID for KCF Technologies PRN device which has a USB port for its serial console. Signed-off-by:
Mark Edwards <sonofaforester@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jason A. Donenfeld authored
commit 48ef23a4 upstream. This phone is already supported by the visor driver. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Jason A. Donenfeld authored
commit 82ee3aeb upstream. Samsung has just released a portable USB3 SSD, coming in a very small and nice form factor. It's USB ID is 04e8:8001, which unfortunately is already used by the Palm Visor driver for the Samsung I330 phone cradle. Having pl2303 or visor pick up this device ID results in conflicts with the usb-storage driver, which handles the newly released portable USB3 SSD. To work around this conflict, I've dug up a mailing list post [1] from a long time ago, in which a user posts the full USB descriptor information. The most specific value in this appears to be the interface class, which has value 255 (0xff). Since usb-storage requires an interface class of 0x8, I believe it's correct to disambiguate the two devices by matching on 0xff inside visor. [1] http://permalink.gmane.org/gmane.linux.usb.user/4264Signed-off-by:
-
Joe Lawrence authored
commit 948fa135 upstream. If the xHCI host controller has died (ie, device removed) or suffered other serious fatal error (STS_FATAL), then xhci_irq should handle this condition with IRQ_HANDLED instead of -ESHUTDOWN. Signed-off-by:
Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit 18cc2f4c upstream. Our event ring consists of only one segment, and we risk filling the event ring in case we get isoc transfers with short intervals such as webcams that fill a TD every microframe (125us) With 64 TRB segment size one usb camera could fill the event ring in 8ms. A setup with several cameras and other devices can fill up the event ring as it is shared between all devices. This has occurred when uvcvideo queues 5 * 32TD URBs which then get cancelled when the video mode changes. The cancelled URBs are returned in the xhci interrupt context and blocks the interrupt handler from handling the new events. A full event ring will block xhci from scheduling traffic and affect all devices conneted to the xhci, will see errors such as Missed Service Intervals for isoc devices, and and Split transaction errors for LS/FS interrupt devices. Increasing the TRB_PER_SEGMENT will also increase the default endpoint ring size, which is welcome as for most isoc transfer we had to dynamically expand the endpoint ring anyway to be able to queue the 5 * 32TDs uvcvideo queues. The default size used to be 64 TRBs per segment Signed-off-by:
-
Mathias Nyman authored
commit d104d015 upstream. Isoc TDs usually consist of one TRB, sometimes two. When all goes well we receive only one success event for a TD, and move the dequeue pointer to the next TD. This fails if the TD consists of two TRBs and we get a transfer error on the first TRB, we will then see two events for that TD. Fix this by making sure the event we get is for the last TRB in that TD before moving the dequeue pointer to the next TD. This will resolve some of the uvc and dvb issues with the "ERROR Transfer event TRB DMA ptr not part of current TD" error message Signed-off-by:
-
Andy Grover authored
commit 5a7125c6 upstream. See https://bugzilla.redhat.com/show_bug.cgi?id=1025672 We need to put() the reference to the scsi host that we got in pscsi_configure_device(). In VIRTUAL_HOST mode it is associated with the dev_virt, not the hba_virt. Signed-off-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Zidan Wang authored
commit 17fc2e0a upstream. According to the RM of wm8958, BCLK DIV 348 doesn't exist, correct it to 384. Signed-off-by:
Zidan Wang <zidan.wang@freescale.com> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Zidan Wang authored
commit 85e36a1f upstream. It should be "RINPUT3" instead of "LINPUT3" route to "Right Input Mixer". Signed-off-by:
-
Axel Lin authored
commit 545774bd upstream. mc13xxx_reg_rmw() won't change any bit if passing 0 to the mask field. Pass AUDIO_SSI_SEL instead of 0 for the mask field to set AUDIO_SSI_SEL bit. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
-
Takashi Iwai authored
commit 88776f36 upstream. Fujitsu Lifebook E752 laptop needs a similar quirk done for Lifebook T731. Otherwise the headphone is always muted. Reported-and-tested-by:
Christian Weber <we_chris@hotmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David Henningsson authored
commit 6ffc0898 upstream. This patch adds support for Conexant HD Audio codecs CX20721, CX20722, CX20723 and CX20724. BugLink: https://bugs.launchpad.net/bugs/1454656Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Al Viro authored
commit 2159184e upstream. when we find that a child has died while we'd been trying to ascend, we should go into the first live sibling itself, rather than its sibling. Off-by-one in question had been introduced in "deal with deadlock in d_walk()" and the fix needs to be backported to all branches this one has been backported to. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jan Kara authored
commit f18c34e4 upstream. If the specified maximum length of the string is a multiple of unsigned long, we would load one long behind the specified maximum. If that happens to be in a next page, we can hit a page fault although we were not expected to. Fix the off-by-one bug in the test whether we are at the end of the specified range. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Guenter Roeck authored
commit 1b63bf61 upstream. The following error message is seen when loading the nct6775 driver with DEBUG_LOCK_ALLOC enabled. BUG: key ffff88040b2f0030 not in .data! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 186 at kernel/locking/lockdep.c:2988 lockdep_init_map+0x469/0x630() DEBUG_LOCKS_WARN_ON(1) Caused by a missing call to sysfs_attr_init() when initializing sysfs attributes. Reported-by:
Alexey Orishko <alexey.orishko@gmail.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
Chris Lesiak authored
commit adba6575 upstream. When configured via device tree, the associated iio device needs to be measuring voltage for the conversion to resistance to be correct. Return -EINVAL if that is not the case. Signed-off-by:
Chris Lesiak <chris.lesiak@licor.com> Signed-off-by:
-
David Vrabel authored
commit 77bb3dfd upstream. A non-percpu VIRQ (e.g., VIRQ_CONSOLE) may be freed on a different VCPU than it is bound to. This can result in a race between handle_percpu_irq() and removing the action in __free_irq() because handle_percpu_irq() does not take desc->lock. The interrupt handler sees a NULL action and oopses. Only use the percpu chip/handler for per-CPU VIRQs (like VIRQ_TIMER). # cat /proc/interrupts | grep virq 40: 87246 0 xen-percpu-virq timer0 44: 0 0 xen-percpu-virq debug0 47: 0 20995 xen-percpu-virq timer1 51: 0 0 xen-percpu-virq debug1 69: 0 0 xen-dyn-virq xen-pcpu 74: 0 0 xen-dyn-virq mce 75: 29 0 xen-dyn-virq hvc_console Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Ilya Dryomov authored
commit b0494532 upstream. This commit does two things. First, if there are any homeless lingering requests, we now request a new osdmap even if the osdmap that is being processed brought no changes, i.e. if a given lingering request turned homeless in one of the previous epochs and remained homeless in the current epoch. Not doing so leaves us with a stale osdmap and as a result we may miss our window for reestablishing the watch and lose notifies. MON=1 OSD=1: # cat linger-needmap.sh #!/bin/bash rbd create --size 1 test DEV=$(rbd map test) ceph osd out 0 rbd map dne/dne # obtain a new osdmap as a side effect (!) sleep 1 ceph osd in 0 rbd resize --size 2 test # rbd info test | grep size -> 2M # blockdev --getsize $DEV -> 1M N.B.: Not obtaining a new osdmap in between "osd out" and "osd in" above is enough to make it miss that resize notify, but that is a bug^Wlimitation of ceph watch/notify v1. Second, homeless lingering requests are now kicked just like those lingering requests whose mapping has changed. This is mainly to recognize that a homeless lingering request makes no sense and to preserve the invariant that a registered lingering request is not sitting on any of r_req_lru_item lists. This spares us a WARN_ON, which commit ba9d114e ("libceph: clear r_req_lru_item in __unregister_linger_request()") tried to fix the _wrong_ way. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Rusty Russell authored
commit 83a35114 upstream. This bug has been there since day 1; addresses in the top guest physical page weren't considered valid. You could map that page (the check in check_gpte() is correct), but if a guest tried to put a pagetable there we'd check that address manually when walking it, and kill the guest. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Sasha Levin authored
commit dcbff39d upstream. match_token() expects a NULL terminator at the end of the token list so that it would know where to stop. Not having one causes it to overrun to invalid memory. In practice, passing a mount option that omfs didn't recognize would sometimes panic the system. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Junling Zheng authored
Based on 08adb7da upstream. We found that after v3.10.73, recvmsg might return -EFAULT while -EINVAL was expected. We tested it through the recvmsg01 testcase come from LTP testsuit. It set msg->msg_namelen to -1 and the recvmsg syscall returned errno 14, which is unexpected (errno 22 is expected): recvmsg01 4 TFAIL : invalid socket length ; returned -1 (expected -1), errno 14 (expected 22) Linux mainline has no this bug for commit 08adb7da fixes it accidentally. However, it is too large and complex to be backported to LTS 3.10. Commit 281c9c36 (net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour) made get_compat_msghdr() return error if msg_sys->msg_namelen was negative, which changed the behaviors of recvmsg and sendmsg syscall in a lib32 system: Before commit 281c9c36, get_compat_msghdr() wouldn't fail and it would return -EINVAL in move_addr_to_user() or somewhere if msg_sys->msg_namelen was invalid and then syscall returned -EINVAL, which is correct. And now, when msg_sys->msg_namelen is negative, get_compat_msghdr() will fail and wants to return -EINVAL, however, the outer syscall will return -EFAULT directly, which is unexpected. This patch gets the return value of get_compat_msghdr() as well as copy_msghdr_from_user(), then returns this expected value if get_compat_msghdr() fails. Fixes: 281c9c36 (net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour) Signed-off-by:
Junling Zheng <zhengjunling@huawei.com> Signed-off-by:
Hanbing Xu <xuhanbing@huawei.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
Paolo Bonzini authored
commit 89876115 upstream. smep_andnot_wp is initialized in kvm_init_shadow_mmu and shadow pages should not be reused for different values of it. Thus, it has to be added to the mask in kvm_mmu_pte_write. Reviewed-by:
Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Mel Gorman authored
commit c297663c upstream. The command line parsing takes place before jump labels are initialised which generates a warning if numa_balancing= is specified and CONFIG_JUMP_LABEL is set. On older kernels before commit c4b2c0c5 ("static_key: WARN on usage before jump_label_init was called") the kernel would have crashed. This patch enables automatic numa balancing later in the initialisation process if numa_balancing= is specified. Signed-off-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
- 02 Jun, 2015 6 commits
-
-
Russell King authored
commit 1b979372 upstream. Josh Stone reports: I've discovered a case where both arm and arm64 will miss a ptrace syscall-exit that they should report. If the syscall is entered without TIF_SYSCALL_TRACE set, then it goes on the fast path. It's then possible to have TIF_SYSCALL_TRACE added in the middle of the syscall, but ret_fast_syscall doesn't check this flag again. Fix this by always checking for a syscall trace in the fast exit path. Reported-by:
Josh Stone <jistone@redhat.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Larry Finger authored
commit 414b7e3b upstream. The USB mini-driver in rtlwifi, which is used by rtl8192cu, issues a call to usb_control_msg() with a timeout value of 0. In some instances where the interface is shutting down, this infinite wait results in a CPU deadlock. A one second timeout fixes this problem without affecting any normal operations. This bug is reported at https://bugzilla.novell.com/show_bug.cgi?id=927786. Reported-by:
Bernhard Wiedemann <bwiedemann@suse.com> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Cc: Bernhard Wiedemann <bwiedemann@suse.com> Cc: Takashi Iwai<tiwai@suse.com> Signed-off-by:
-
Steve French authored
commit 7ff8d45c upstream. We were off by one calculating the length of ioctls in some cases because the protocol specification for SMB2 ioctl includes a mininum one byte payload but not all SMB2 ioctl requests actually have a data buffer to send. We were also not zeroing out the return buffer (in case of error this is helpful). Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit 59c816c1 upstream. This code in vhost_scsi_make_tpg() is confusing because we limit "tpgt" to UINT_MAX but the data type of "tpg->tport_tpgt" and that is a u16. I looked at the context and it turns out that in vhost_scsi_set_endpoint(), "tpg->tport_tpgt" is used as an offset into the vs_tpg[] array which has VHOST_SCSI_MAX_TARGET (256) elements so anything higher than 255 then it is invalid. I have made that the limit now. In vhost_scsi_send_evt() we mask away values higher than 255, but now that the limit has changed, we don't need the mask. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
jmarchan@redhat.com authored
commit 19751c07 upstream. According to Posix, if MAP_FIXED is specified mmap shall set ENOMEM if the requested mapping exceeds the allowed range for address space of the process. The generic code set it right, but the specific powerpc slice_get_unmapped_area() function currently returns -EINVAL in that case. This patch corrects it. Signed-off-by:
Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Aravind Gopalakrishnan authored
commit 904cb367 upstream. New Fam15h models carry extra feature bits and extend the MSR register space for IBS ops. Adding them here. While at it, add functionality to read IbsBrTarget and OpData4 depending on their availability if user wants a PERF_SAMPLE_RAW. Signed-off-by:
Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Acked-by:
Borislav Petkov <bp@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Len Brown <len.brown@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <paulus@samba.org> Cc: <acme@kernel.org> Link: http://lkml.kernel.org/r/1415651066-13523-1-git-send-email-Aravind.Gopalakrishnan@amd.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
