- 31 Jul, 2013 1 commit
-
-
Stanislaw Gruszka authored
If channel switch is pending and we remove interface we can crash like showed below due to passing NULL vif to mac80211: BUG: unable to handle kernel paging request at fffffffffffff8cc IP: [<ffffffff8130924d>] strnlen+0xd/0x40 Call Trace: [<ffffffff8130ad2e>] string.isra.3+0x3e/0xd0 [<ffffffff8130bf99>] vsnprintf+0x219/0x640 [<ffffffff8130c481>] vscnprintf+0x11/0x30 [<ffffffff81061585>] vprintk_emit+0x115/0x4f0 [<ffffffff81657bd5>] printk+0x61/0x63 [<ffffffffa048987f>] ieee80211_chswitch_done+0xaf/0xd0 [mac80211] [<ffffffffa04e7b34>] iwl_chswitch_done+0x34/0x40 [iwldvm] [<ffffffffa04f83c3>] iwlagn_commit_rxon+0x2a3/0xdc0 [iwldvm] [<ffffffffa04ebc50>] ? iwlagn_set_rxon_chain+0x180/0x2c0 [iwldvm] [<ffffffffa04e5e76>] iwl_set_mode+0x36/0x40 [iwldvm] [<ffffffffa04e5f0d>] iwlagn_mac_remove_interface+0x8d/0x1b0 [iwldvm] [<ffffffffa0459b3d>] ieee80211_do_stop+0x29d/0x7f0 [mac80211] This is because we nulify ctx->vif in iwlagn_mac_remove_interface() before calling some other functions that teardown interface. To fix just check ctx->vif on iwl_chswitch_done(). We should not call ieee80211_chswitch_done() as channel switch works were already canceled by mac80211 in ieee80211_do_stop() -> ieee80211_mgd_stop(). Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=979581 Cc: stable@vger.kernel.org Reported-by:
Lukasz Jagiello <jagiello.lukasz@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
- 26 Jul, 2013 4 commits
-
-
Emmanuel Grumbach authored
If we forget to do so, we can't send HCMD to firmware while the NIC is in RFKILL state. Cc: stable@vger.kernel.org Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
When a not fully started aggregation session is destroyed and flushed, we get a warning, e.g. WARNING: at drivers/net/wireless/iwlwifi/pcie/tx.c:1142 iwl_trans_pcie_txq_disable+0x11c/0x160 queue 16 not used Modules linked in: [...] Pid: 5135, comm: hostapd Tainted: G W O 3.5.0 #10 Call Trace: wlan0: driver sets block=0 for sta 00:03:7f:10:44:d3 [<ffffffff81036492>] warn_slowpath_common+0x72/0xa0 [<ffffffff81036577>] warn_slowpath_fmt+0x47/0x50 [<ffffffffa0368d6c>] iwl_trans_pcie_txq_disable+0x11c/0x160 [iwlwifi] [<ffffffffa03a2099>] iwl_mvm_sta_tx_agg_flush+0xe9/0x150 [iwlmvm] [<ffffffffa0396c43>] iwl_mvm_mac_ampdu_action+0xf3/0x1e0 [iwlmvm] [<ffffffffa0293ad3>] ___ieee80211_stop_tx_ba_session+0x193/0x920 [mac80211] [<ffffffffa0294ed8>] __ieee80211_stop_tx_ba_session+0x48/0x70 [mac80211] [<ffffffffa029159f>] ieee80211_sta_tear_down_BA_sessions+0x4f/0x80 [mac80211] [<ffffffffa028a686>] __sta_info_destroy+0x66/0x370 [mac80211] [<ffffffffa028abb4>] sta_info_destroy_addr_bss+0x44/0x70 [mac80211] [<ffffffffa02a3e26>] ieee80211_del_station+0x26/0x50 [mac80211] [<ffffffffa01e6395>] nl80211_del_station+0x85/0x200 [cfg80211] when a station deauthenticated from us without fully setting up the aggregation session. Fix this by checking the aggregation state before removing the hardware queue. Cc: stable@vger.kernel.org Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Ilan Peer authored
The managed interface PS was not disabled when a GO interface was added. As a consequence, when the station VMAC was in PS, the GO also was not on the medium. Fix this. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Emmanuel Grumbach authored
This allows to clean all kinds of bad state it might be in. This solves situation where HW RFkill was switched while the NIC was offline. Until now, we relied on the firmware to do clean the interrupt, but new firmwares don't do that any more. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
- 24 Jul, 2013 2 commits
-
-
David Spinadel authored
Set SSID bitmap for direct scan even on passive channels, for the passive-to-active feature. Without this patch only the SSID from probe request template is sent on passive channels, after passive-to-active switching, causing us to not find all desired networks. Remove the unused passive scan mask constant. Cc: stable@vger.kernel.org Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
David Spinadel <david.spinadel@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Unfortunately, the firmware only supports replay counters for a single GTK in D3, so that we should only upload the last key and use its replay counters. Since mac80211 key iteration will walk through the keys in order of their addition, simply use the same HW key index (1) for all GTKs, thus overwriting previous ones with newer ones. The replay counters for it are already used. Reviewed-by:
Yaron Vaknin <Yaron.Vaknin@intel.com> Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
- 22 Jul, 2013 1 commit
-
-
Emmanuel Grumbach authored
This SKU was missing in the list of supported devices https://bugzilla.kernel.org/show_bug.cgi?id=60577 Cc: <stable@vger.kernel.org> [all versions] Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
- 16 Jul, 2013 8 commits
-
-
David Spinadel authored
Bits 1-21 in this channel type attributes are indication for which SSID is going to be sent on this channel. Since the first SSID is sent implicitly in the probe request, we don't need to toggle its bit here. Signed-off-by:
David Spinadel <david.spinadel@intel.com> Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
David Spinadel authored
Increment index in each iteration. Without this increment we are overriding the added SSIDs and we will send only the last SSId and (n_ssids - 1) broadcast probes. Cc: <stable@vger.kernel.org> [3.9+] Signed-off-by:
David Spinadel <david.spinadel@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Due to a firmware bug, it crashes when the beacon interval is smaller than 16. Avoid this by refusing the station state change creating the AP station, causing mac80211 to abandon the attempt to connect to the AP, and eventually wpa_s to blacklist it. Cc: stable@vger.kernel.org Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Emmanuel Grumbach authored
The firmware / HW can't support more than 16 Rx BA sessions. Deny any attemps to open more sessions than that. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes@sipsolutions.net>
-
Emmanuel Grumbach authored
We didn't release the Rx AMPDU ressources properly. This bug led to firmware assert after 16 BA sessions. Cc: <stable@vger.kernel.org> [3.9+] Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes@sipsolutions.net>
-
Alexander Bondar authored
Avoid creating VIF specific debugfs directory if already exist. This may happen when, for example, resetting hw, suspend-resume. Signed-off-by:
Alexander Bondar <alexander.bondar@intel.com> Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes@sipsolutions.net>
-
Johannes Berg authored
The BT_CONFIG command that is sent to the device during startup will enable BT coex unless the module parameter turns it off, but on devices without Bluetooth this may cause problems, as reported in Redhat BZ 885407. Fix this by sending the BT_CONFIG command only when the device has Bluetooth. Cc: stable@vger.kernel.org Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes@sipsolutions.net>
-
Emmanuel Grumbach authored
This was missing and prevented any further attempts to load the module. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes@sipsolutions.net>
-
- 14 Jul, 2013 15 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linuxLinus Torvalds authored
Pull slab update from Pekka Enberg: "Highlights: - Fix for boot-time problems on some architectures due to init_lock_keys() not respecting kmalloc_caches boundaries (Christoph Lameter) - CONFIG_SLUB_CPU_PARTIAL requested by RT folks (Joonsoo Kim) - Fix for excessive slab freelist draining (Wanpeng Li) - SLUB and SLOB cleanups and fixes (various people)" I ended up editing the branch, and this avoids two commits at the end that were immediately reverted, and I instead just applied the oneliner fix in between myself. * 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux slub: Check for page NULL before doing the node_match check mm/slab: Give s_next and s_stop slab-specific names slob: Check for NULL pointer before calling ctor() slub: Make cpu partial slab support configurable slab: add kmalloc() to kernel API documentation slab: fix init_lock_keys slob: use DIV_ROUND_UP where possible slub: do not put a slab to cpu partial list when cpu_partial is 0 mm/slub: Use node_nr_slabs and node_nr_objs in get_slabinfo mm/slub: Drop unnecessary nr_partials mm/slab: Fix /proc/slabinfo unwriteable for slab mm/slab: Sharing s_next and s_stop between slab and slub mm/slab: Fix drain freelist excessively slob: Rework #ifdeffery in slab.h mm, slab: moved kmem_cache_alloc_node comment to correct place
-
Steven Rostedt authored
In the -rt kernel (mrg), we hit the following dump: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180 PGD a2d39067 PUD b1641067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: sunrpc cpufreq_ondemand ipv6 tg3 joydev sg serio_raw pcspkr k8temp amd64_edac_mod edac_core i2c_piix4 e100 mii shpchp ext4 mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom sata_svw ata_generic pata_acpi pata_serverworks radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod CPU 3 Pid: 20878, comm: hackbench Not tainted 3.6.11-rt25.14.el6rt.x86_64 #1 empty empty/Tyan Transport GT24-B3992 RIP: 0010:[<ffffffff811573f1>] [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180 RSP: 0018:ffff8800a9b17d70 EFLAGS: 00010213 RAX: 0000000000000000 RBX: 0000000001200011 RCX: ffff8800a06d8000 RDX: 0000000004d92a03 RSI: 00000000000000d0 RDI: ffff88013b805500 RBP: ffff8800a9b17dc0 R08: ffff88023fd14d10 R09: ffffffff81041cbd R10: 00007f4e3f06e9d0 R11: 0000000000000246 R12: ffff88013b805500 R13: ffff8801ff46af40 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f4e3f06e700(0000) GS:ffff88023fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 00000000a2d3a000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process hackbench (pid: 20878, threadinfo ffff8800a9b16000, task ffff8800a06d8000) Stack: ffff8800a9b17da0 ffffffff81202e08 ffff8800a9b17de0 000000d001200011 0000000001200011 0000000001200011 0000000000000000 0000000000000000 00007f4e3f06e9d0 0000000000000000 ffff8800a9b17e60 ffffffff81041cbd Call Trace: [<ffffffff81202e08>] ? current_has_perm+0x68/0x80 [<ffffffff81041cbd>] copy_process+0xdd/0x15b0 [<ffffffff810a2125>] ? rt_up_read+0x25/0x30 [<ffffffff8104369a>] do_fork+0x5a/0x360 [<ffffffff8107c66b>] ? migrate_enable+0xeb/0x220 [<ffffffff8100b068>] sys_clone+0x28/0x30 [<ffffffff81527423>] stub_clone+0x13/0x20 [<ffffffff81527152>] ? system_call_fastpath+0x16/0x1b Code: 89 fc 89 75 cc 41 89 d6 4d 8b 04 24 65 4c 03 04 25 48 ae 00 00 49 8b 50 08 4d 8b 28 49 8b 40 10 4d 85 ed 74 12 41 83 fe ff 74 27 <48> 8b 00 48 c1 e8 3a 41 39 c6 74 1b 8b 75 cc 4c 89 c9 44 89 f2 RIP [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180 RSP <ffff8800a9b17d70> CR2: 0000000000000000 ---[ end trace 0000000000000002 ]--- Now, this uses SLUB pretty much unmodified, but as it is the -rt kernel with CONFIG_PREEMPT_RT set, spinlocks are mutexes, although they do disable migration. But the SLUB code is relatively lockless, and the spin_locks there are raw_spin_locks (not converted to mutexes), thus I believe this bug can happen in mainline without -rt features. The -rt patch is just good at triggering mainline bugs ;-) Anyway, looking at where this crashed, it seems that the page variable can be NULL when passed to the node_match() function (which does not check if it is NULL). When this happens we get the above panic. As page is only used in slab_alloc() to check if the node matches, if it's NULL I'm assuming that we can say it doesn't and call the __slab_alloc() code. Is this a correct assumption? Acked-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more vfs stuff from Al Viro: "O_TMPFILE ABI changes, Oleg's fput() series, misc cleanups, including making simple_lookup() usable for filesystems with non-NULL s_d_op, which allows us to get rid of quite a bit of ugliness" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: sunrpc: now we can just set ->s_d_op cgroup: we can use simple_lookup() now efivarfs: we can use simple_lookup() now make simple_lookup() usable for filesystems that set ->s_d_op configfs: don't open-code d_alloc_name() __rpc_lookup_create_exclusive: pass string instead of qstr rpc_create_*_dir: don't bother with qstr llist: llist_add() can use llist_add_batch() llist: fix/simplify llist_add() and llist_add_batch() fput: turn "list_head delayed_fput_list" into llist_head fs/file_table.c:fput(): add comment Safer ABI for O_TMPFILE
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
... and use d_hash_and_lookup() instead of open-coding it, for fsck sake... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
just pass the name Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds authored
Pull x86 platform driver updates from Matthew Garrett: "Nothing overly exciting here - a couple of new drivers that don't do a great deal, along with some miscellaneous fixes and a couple of small feature enablement patches" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: x86 platform drivers: fix gpio leak toshiba_acpi: Add dependency on SERIO_I8042 asus-nb-wmi: set wapf=4 for ASUSTeK COMPUTER INC. 1015E/U Add trivial driver to disable Intel Smart Connect Add support driver for Intel Rapid Start Technology hp-wmi: add supports for POST code error asus-wmi: control wlan-led only if wapf == 4 drivers/platform/x86/intel_ips: Convert to module_pci_driver asus-nb-wmi: ignore ALS notification key code asus-wmi: append newline to messages x86: asus-laptop: fix invalid point access x86: msi-laptop: fix memleak amilo-rfkill: Add dependency on SERIO_I8042 dell-laptop: fix error return code in dell_init() hp-wmi: Enable hotkeys on some systems
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull second round of input updates from Dmitry Torokhov: "An update to Elantech driver to support hardware v7, fix to the new cyttsp4 driver to use proper addressing, ads7846 device tree support and nspire-keypad got a small cleanup." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: nspire-keypad - replace magic offset with define Input: elantech - fix for newer hardware versions (v7) Input: cyttsp4 - use 16bit address for I2C/SPI communication Input: ads7846 - add device tree bindings Input: ads7846 - make sure we do not change platform data
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Just a bunch of small fixes and tidy ups: 1) Finish the "busy_poll" renames, from Eliezer Tamir. 2) Fix RCU stalls in IFB driver, from Ding Tianhong. 3) Linearize buffers properly in tun/macvtap zerocopy code. 4) Don't crash on rmmod in vxlan, from Pravin B Shelar. 5) Spinlock used before init in alx driver, from Maarten Lankhorst. 6) A sparse warning fix in bnx2x broke TSO checksums, fix from Dmitry Kravkov. 7) Dummy and ifb driver load failure paths can oops, fixes from Tan Xiaojun and Ding Tianhong. 8) Correct MTU calculations in IP tunnels, from Alexander Duyck. 9) Account all TCP retransmits in SNMP stats properly, from Yuchung Cheng. 10) atl1e and via-rhine do not handle DMA mapping failures properly, from Neil Horman. 11) Various equal-cost multipath route fixes in ipv6 from Hannes Frederic Sowa" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits) ipv6: only static routes qualify for equal cost multipathing via-rhine: fix dma mapping errors atl1e: fix dma mapping warnings tcp: account all retransmit failures usb/net/r815x: fix cast to restricted __le32 usb/net/r8152: fix integer overflow in expression net: access page->private by using page_private net: strict_strtoul is obsolete, use kstrtoul instead drivers/net/ieee802154: don't use devm_pinctrl_get_select_default() in probe drivers/net/ethernet/cadence: don't use devm_pinctrl_get_select_default() in probe drivers/net/can/c_can: don't use devm_pinctrl_get_select_default() in probe net/usb: add relative mii functions for r815x net/tipc: use %*phC to dump small buffers in hex form qlcnic: Adding Maintainers. gre: Fix MTU sizing check for gretap tunnels pkt_sched: sch_qfq: remove forward declaration of qfq_update_agg_ts pkt_sched: sch_qfq: improve efficiency of make_eligible gso: Update tunnel segmentation to support Tx checksum offload inet: fix spacing in assignment ifb: fix oops when loading the ifb failed ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull final round of SCSI updates from James Bottomley: "This is the remaining set of SCSI patches for the merge window. It's mostly driver updates (scsi_debug, qla2xxx, storvsc, mp3sas). There are also several bug fixes in fcoe, libfc, and megaraid_sas. We also have a couple of core changes to try to make device destruction more deterministic" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits) [SCSI] scsi constants: command, sense key + additional sense strings fcoe: Reduce number of sparse warnings fcoe: Stop fc_rport_priv structure leak libfcoe: Fix meaningless log statement libfc: Differentiate echange timer cancellation debug statements libfc: Remove extra space in fc_exch_timer_cancel definition fcoe: fix the link error status block sparse warnings fcoe: Fix smatch warning in fcoe_fdmi_info function libfc: Reject PLOGI from nodes with incompatible role [SCSI] enable destruction of blocked devices which fail LUN scanning [SCSI] Fix race between starved list and device removal [SCSI] megaraid_sas: fix a bug for 64 bit arches [SCSI] scsi_debug: reduce duplication between prot_verify_read and prot_verify_write [SCSI] scsi_debug: simplify offset calculation for dif_storep [SCSI] scsi_debug: invalidate protection info for unmapped region [SCSI] scsi_debug: fix NULL pointer dereference with parameters dif=0 dix=1 [SCSI] scsi_debug: fix incorrectly nested kmap_atomic() [SCSI] scsi_debug: fix invalid address passed to kunmap_atomic() [SCSI] mpt3sas: Bump driver version to v02.100.00.00 [SCSI] mpt3sas: when async scanning is enabled then while scanning, devices are removed but their transport layer entries are not removed ...
-
- 13 Jul, 2013 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "Fix a potential deadlock versus hrtimers" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix HRTICK
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: - core fix for missing round up in the generic irq chip implementation - new irq chip for MOXA SoCs - a few fixes and cleanups in the irqchip drivers * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: Add support for MOXA ART SoCs genirq: generic chip: Use DIV_ROUND_UP to calculate numchips irqchip: nvic: Fix wrong num_ct argument for irq_alloc_domain_generic_chips() irqchip: sun4i: Staticize sun4i_irq_ack() irqchip: vt8500: Staticize local symbols
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: - watchdog fixes for full dynticks - improved debug output for full dynticks - remove an obsolete full dynticks check - two ARM SoC clocksource drivers for sharing across SoCs - tick broadcast fix for CPU hotplug * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: broadcast: Check broadcast mode on CPU hotplug clocksource: arm_global_timer: Add ARM global timer support clocksource: Add Marvell Orion SoC timer nohz: Remove obsolete check for full dynticks CPUs to be RCU nocbs watchdog: Boot-disable by default on full dynticks watchdog: Rename confusing state variable watchdog: Register / unregister watchdog kthreads on sysctl control nohz: Warn if the machine can not perform nohz_full
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: - fix for do_div() abuse on x86 - locking fix in perf core - a pile of (build) fixes and cleanups in perf tools * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) perf/x86: Fix incorrect use of do_div() in NMI warning perf: Fix perf_lock_task_context() vs RCU perf: Remove WARN_ON_ONCE() check in __perf_event_enable() for valid scenario perf: Clone child context from parent context pmu perf script: Fix broken include in Context.xs perf tools: Fix -ldw/-lelf link test when static linking perf tools: Revert regression in configuration of Python support perf tools: Fix perf version generation perf stat: Fix per-socket output bug for uncore events perf symbols: Fix vdso list searching perf evsel: Fix missing increment in sample parsing perf tools: Update symbol_conf.nr_events when processing attribute events perf tools: Fix new_term() missing free on error path perf tools: Fix parse_events_terms() segfault on error path perf evsel: Fix count parameter to read call in event_format__new perf tools: fix a typo of a Power7 event name perf tools: Fix -x/--exclude-other option for report command perf evlist: Enhance perf_evlist__start_workload() perf record: Remove -f/--force option perf record: Remove -A/--append option ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core locking updates from Thomas Gleixner: "Header cleanup as requested by Linus" (This is the "don't include support for ww_mutex in a header file that everybody wants, when almost nobody wants the ww part" change) * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mutex: Move ww_mutex definitions to ww_mutex.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "This is our first set of fixes from arm-soc for 3.11. - A handful of build and warning fixes from Arnd - A collection of OMAP fixes - defconfig updates to make the default configs more useful for real use (and testing) out of the box on hardware And a couple of other small fixes. Some of these have been recently applied but it's normally how we deal with fixes, with less bake time in -next needed" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits) arm: multi_v7_defconfig: Tweaks for omap and sunxi arm: multi_v7_defconfig: add i.MX options and NFS root ARM: omap2: add select of TI_PRIV_EDMA ARM: exynos: select PM_GENERIC_DOMAINS only when used ARM: ixp4xx: avoid circular header dependency ARM: OMAP: omap_common_late_init may be unused ARM: sti: move DEBUG_STI_UART into alphabetical order ARM: OMAP: build mach-omap code only if needed ARM: zynq: use DT_MACHINE_START ARM: omap5: omap5 has SCU and TWD ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB support ARM: OMAP2+: Enable TI_EDMA in omap2plus_defconfig ARM: OMAP2+: omap2plus_defconfig: enable DRA752 thermal support by default ARM: OMAP2+: omap2plus_defconfig: enable TI bandgap driver ARM: OMAP2+: devices: remove duplicated include from devices.c ARM: OMAP3: igep0020: Set DSS pins in correct mux mode. ARM: OMAP2+: N900: enable N900-specific drivers even if device tree is enabled ARM: OMAP2+: Cocci spatch "ptr_ret.spatch" ARM: OMAP2+: Remove obsolete Makefile line ARM: OMAP5: Enable Cortex A15 errata 798181 ...
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A few fixes for ARM, mostly just one liners with the exception of the missing section specification. We decided not to rely on .previous to fix this but to explicitly state the section we want the code to be in." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7778/1: smp_twd: twd_update_frequency need be run on all online CPUs ARM: 7782/1: Kconfig: Let ARM_ERRATA_364296 not depend on CONFIG_SMP ARM: mm: fix boot on SA1110 Assabet ARM: 7781/1: mmu: Add debug_ll_io_init() mappings to early mappings ARM: 7780/1: add missing linker section markup to head-common.S
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove <asm/kspd.h> SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: - lots of devm_ conversions and cleanup - platform_set_drvdata cleanups - s3c2410: dev_err/dev_info + dev_pm_ops - watchdog_core: don't try to stop device if not running fix - wdrtas: use print_hex_dump - xilinx cleanups - orion_wdt fixes - softdog cleanup - hpwdt: check on UEFI bits - deletion of mpcore_wdt driver - addition of broadcom BCM2835 watchdog timer driver - addition of MEN A21 watcdog devices * git://www.linux-watchdog.org/linux-watchdog: (38 commits) watchdog: hpwdt: Add check for UEFI bits watchdog: softdog: remove replaceable ping operation watchdog: New watchdog driver for MEN A21 watchdogs Watchdog: fix clearing of the watchdog interrupt Watchdog: allow orion_wdt to be built for Dove watchdog: Add Broadcom BCM2835 watchdog timer driver watchdog: delete mpcore_wdt driver watchdog: xilinx: Setup the origin compatible string watchdog: xilinx: Fix driver header watchdog: wdrtas: don't use custom version of print_hex_dump watchdog: core: don't try to stop device if not running watchdog: jz4740: Pass device to clk_get watchdog: twl4030: Remove redundant platform_set_drvdata() watchdog: mpcore: Remove redundant platform_set_drvdata() watchdog: da9055: use platform_{get,set}_drvdata() watchdog: da9052: use platform_{get,set}_drvdata() watchdog: cpwd: use platform_{get,set}_drvdata() watchdog: s3c2410_wdt: convert s3c2410wdt to dev_pm_ops watchdog: s3c2410_wdt: use dev_err()/dev_info() instead of pr_err()/pr_info() watchdog: wm831x: use platform_{get,set}_drvdata() ...
-