Merge tag 'i2c-host-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

The i801 and designware drivers received most of the changes,
including refactorings and some additions.

Recovery changes for the iMX and iMX-LPI2C are now utilizing the
generic i2c support.

The Cadence driver now supports system suspend and resume.

The hisi, mpc, sh_mobile, and npcm drivers have undergone some
cleanups and improvements. Meanwhile, Uwe continues his work on
converting the "remove" callback to become a void function.

The pca954x mux driver now supports additional configurations,
such as isolating faulty channels and flushing stuck buses, among
others.

Support has been added for Renesas r8a779h0, i.MX95 LPI2C, and
Microchip sam9x7. Meanwhile, Geert lays the groundwork for the
upcoming R-Car Gen4.

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Class-based client auto-detection has been considered a legacy mechanism
for 10 yrs now. See commit 0c176170 ("i2c: add deprecation warning
for class based instantiation"). Change the documentation of how to
write an i2c client accordingly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

I2C_M_RD is defined as and guaranteed to be 1 and 'flag & I2C_M_RD' is
one or zero. No need for an additional condition to obtain the value.
Signed-off-by: Hsin-Yu.Chen <harry021633@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
[wsa: slightly updated commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Currently, all Kconfig symbols for R-Car Gen4 SoCs select
ARCH_RCAR_GEN3, which might confuse the casual reader.  Prepare for the
advent of ARCH_RCAR_GEN4 by extending the dependency for auto-selecting
reset controller support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

This adds i2c bus recovery to the lpi2c driver.

Uses the generic recovery function setting the SCL/SDA pads as
GPIO pins and sending 9 clocks to try and recover the bus.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Enable device system suspend and resume PM support, and mark the device
state as suspended during system suspend to reject any data transfer.
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

DRV_NAME was useful back in the days. But here, being used once, it is
only cruft.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

"i2c-scl-clk-low-timeout-us" is wrongly used here because it describes
maximum clock stretching not maximum transfer time. Additionally, it is
deprecated because of issues. Move this driver to the correct binding.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

"i2c-scl-clk-low-timeout-us" has flaws in itself and the usage here is
all wrong. The driver doesn't use it as a maximum time for clock
stretching but the maximum time for a total transfer. We already have
a binding for the latter. Convert the wrong binding from examples.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

If this is an adapter on a muxed bus segment, assume that each segment
is connected to a subset of the (> 8) overall memory slots. In this
case let's probe the maximum of 8 slots, however stop if the number
of overall populated slots is reached.

If we're not on a muxed segment and the total number of slots is > 8,
then warn because then not all SPD eeproms can be addressed.
Presumably the bus is muxed, but the mux config is missing.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[wsa: removed a superfluous printout]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Since commit aed65af1 ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
i2c_adapter_type and i2c_client_type variables to be constant structures as
well, placing it into read-only memory which can not be modified at
runtime.
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

I got an idea the i2c-designware should not need duplicated state
machines for the interrupt and polling modes. The IP is practically the
same and state transitions happens in response to the events that can be
observed from the DW_IC_RAW_INTR_STAT register. Either by interrupts or
by polling.

Another reasons are the interrupt mode is the most tested, has handling
for special cases as well as transmit abort handling and those are
missing from two polling mode quirks.

Patch implements a generic polling mode by using existing code for
interrupt mode. This is done by moving event handling from the
i2c_dw_isr() into a new i2c_dw_process_transfer() that will be called
both from the i2c_dw_isr() and a polling loop.

Polling loop is implemented in a new i2c_dw_wait_transfer() that is
shared between both modes. In interrupt mode it waits for the completion
object as before. In polling mode both completion object and
DW_IC_RAW_INTR_STAT are polled to determine completed transfer and state
transitions.

Loop tries to save power by sleeping "stetson guessed" range between
3 and 25 µS which falls between 10 cycles of High-speed mode 3.4 Mb/s
and Fast mode 400 kHz. With it the CPU usage was reduced under heavy
Fast mode I2C transfer without much increase in total transfer time but
otherwise no more effort has been put to optimize this.

I decided to convert the txgbe_i2c_dw_xfer_quirk() straight to generic
polling mode code in this patch. It doesn't have HW dependent quirks
like the amd_i2c_dw_xfer_quirk() does have and without users this patch
is needless.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

I believe RX FIFO depth define 0 is incorrect on Wangxun 10Gb NIC. It
must be at least 1 since code is able to read received data from the
DW_IC_DATA_CMD register.

For now this define is irrelevant since the txgbe_i2c_dw_xfer_quirk()
doesn't use the rx_fifo_depth member variable of struct dw_i2c_dev but
is needed when converting code into generic polling mode implementation.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Code is more logically arranged when i2c_dw_read_clear_intrbits() and
i2c_dw_isr() are located before i2c_dw_xfer().

Real reason for this is to prepare for more shared code between
interrupt and polling mode code.

While at it, remove one extra space and refer to the
i2c_dw_init_master() in two comment sections.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Convert access to DW_IC_INTR_MASK register using the existing
__i2c_dw_write_intr_mask() and a __i2c_dw_read_intr_mask() introduced
here. Motivation to this is to prepare for generic polling mode code
where polling mode will use a SW mask instead of DW_IC_INTR_MASK.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

I was testing the polling mode txgbe_i2c_dw_xfer_quirk() on a HW where
the i2c-designware has interrupt connected and shared with other device.
I noticed there is a bogus interrupt for each transfer.

Reason for this that both polling mode functions call the
i2c_dw_xfer_init() which enable interrupts then followed by immediate
disable by the same polling mode functions. This is enough to trigger
TX_EMPTY interrupt.

Fix this by introducing a __i2c_dw_write_intr_mask() helper that unmasks
interrupts conditionally and use it in i2c_dw_xfer_init().
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Currently initialization flow in i2c_dw_probe_master() skips a few steps
and has code duplication for polling mode implementation.

Simplify this by adding a new ACCESS_POLLING flag that is set for those
two platforms that currently use polling mode and use it to skip
interrupt handler setup.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Add compatible string for sam9x7.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Add i.MX95 LPI2C compatible entry, same as i.MX93 compatible
with i.MX7ULP.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Merge tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Reformat nested if-conditionals in Makefiles with 4 spaces

 - Fix CONFIG_DEBUG_INFO_BTF builds for big endian

 - Fix modpost for module srcversion

 - Fix an escape sequence warning in gen_compile_commands.py

 - Fix kallsyms to ignore ARMv4 thunk symbols

* tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kallsyms: ignore ARMv4 thunks along with others
  modpost: trim leading spaces when processing source files list
  gen_compile_commands: fix invalid escape sequence warning
  kbuild: Fix changing ELF file type for output of gen_btf for big endian
  docs: kconfig: Fix grammar and formatting
  kbuild: use 4-space indentation when followed by conditionals

Pull x86 fix from Borislav Petkov:

 - Use a GB page for identity mapping only when memory of this size is
   requested so that mapping of reserved regions is prevented which
   would otherwise lead to system crashes on UV machines

* tag 'x86_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/ident_map: Use gbpages only where full GB page should be mapped.

Pull irq fixes from Borislav Petkov:

 - Fix GICv4.1 affinity update

 - Restore a quirk for ACPI-based GICv4 systems

 - Handle non-coherent GICv4 redistributors properly

 - Prevent spurious interrupts on Broadcom devices using GIC v3
   architecture

 - Other minor fixes

* tag 'irq_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Fix GICv4.1 VPE affinity update
  irqchip/gic-v3-its: Restore quirk probing for ACPI-based systems
  irqchip/gic-v3-its: Handle non-coherent GICv4 redistributors
  irqchip/qcom-mpm: Fix IS_ERR() vs NULL check in qcom_mpm_init()
  irqchip/loongson-eiointc: Use correct struct type in eiointc_domain_alloc()
  irqchip/irq-brcmstb-l2: Add write memory barrier before exit

Pull i2c fixes from Wolfram Sang:
 "Two fixes for i801 and qcom-geni devices. Meanwhile, a fix from Arnd
  addresses a compilation error encountered during compile test on
  powerpc"

* tag 'i2c-for-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i801: Fix block process call transactions
  i2c: pasemi: split driver into two separate modules
  i2c: qcom-geni: Correct I2C TRE sequence

Pull powerpc fixes from Michael Ellerman:
 "This is a bit of a big batch for rc4, but just due to holiday hangover
  and because I didn't send any fixes last week due to a late revert
  request. I think next week should be back to normal.

   - Fix ftrace bug on boot caused by exit text sections with
     '-fpatchable-function-entry'

   - Fix accuracy of stolen time on pseries since the switch to
     VIRT_CPU_ACCOUNTING_GEN

   - Fix a crash in the IOMMU code when doing DLPAR remove

   - Set pt_regs->link on scv entry to fix BPF stack unwinding

   - Add missing PPC_FEATURE_BOOKE on 64-bit e5500/e6500, which broke
     gdb

   - Fix boot on some 6xx platforms with STRICT_KERNEL_RWX enabled

   - Fix build failures with KASAN enabled and 32KB stack size

   - Some other minor fixes

  Thanks to Arnd Bergmann, Benjamin Gray, Christophe Leroy, David
  Engraf, Gaurav Batra, Jason Gunthorpe, Jiangfeng Xiao, Matthias
  Schiffer, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nysal Jan K.A,
  R Nageswara Sastry, Shivaprasad G Bhat, Shrikanth Hegde, Spoorthy,
  Srikar Dronamraju, and Venkat Rao Bagalkote"

* tag 'powerpc-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/iommu: Fix the missing iommu_group_put() during platform domain attach
  powerpc/pseries: fix accuracy of stolen time
  powerpc/ftrace: Ignore ftrace locations in exit text sections
  powerpc/cputable: Add missing PPC_FEATURE_BOOKE on PPC64 Book-E
  powerpc/kasan: Limit KASAN thread size increase to 32KB
  Revert "powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add"
  powerpc: 85xx: mark local functions static
  powerpc: udbg_memcons: mark functions static
  powerpc/kasan: Fix addr error caused by page alignment
  powerpc/6xx: set High BAT Enable flag on G2_LE cores
  selftests/powerpc/papr_vpd: Check devfd before get_system_loc_code()
  powerpc/64: Set task pt_regs->link to the LR value on scv entry
  powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add
  powerpc/pseries/papr-sysparm: use u8 arrays for payloads

Pull bcachefs fixes from Kent Overstreet:
 "Mostly pretty trivial, the user visible ones are:

   - don't barf when replicas_required > replicas

   - fix check_version_upgrade() so it doesn't do something nonsensical
     when we're downgrading"

* tag 'bcachefs-2024-02-17' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: Fix missing va_end()
  bcachefs: Fix check_version_upgrade()
  bcachefs: Clamp replicas_required to replicas
  bcachefs: fix missing endiannes conversion in sb_members
  bcachefs: fix kmemleak in __bch2_read_super error handling path
  bcachefs: Fix missing bch2_err_class() calls

Pull driver core fixes from Greg KH:
 "Here are some driver core fixes, a kobject fix, and a documentation
  update for 6.8-rc5. In detail these changes are:

   - devlink fixes for reported issues with 6.8-rc1

   - topology scheduling regression fix that has been reported by many

   - kobject loosening of checks change in -rc1 is now reverted as some
     codepaths seemed to need the checks

   - documentation update for the CVE process. Has been reviewed by
     many, the last minute change to the document was to bring the .rst
     format back into the the new style rules, the contents did not
     change.

  All of these, except for the documentation update, have been in
  linux-next for over a week. The documentation update has been reviewed
  for weeks by a group of developers, and in public for a week and the
  wording has stabilized for now. If future changes are needed, we can
  do so before 6.8-final is out (or anytime after that)"

* tag 'driver-core-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: Document the Linux Kernel CVE process
  Revert "kobject: Remove redundant checks for whether ktype is NULL"
  driver core: fw_devlink: Improve logs for cycle detection
  driver core: fw_devlink: Improve detection of overlapping cycles
  driver core: Fix device_link_flag_is_sync_state_only()
  topology: Set capacity_freq_ref in all cases

Pull char / miscdriver fixes from Greg KH:
 "Here is a small set of char/misc and IIO driver fixes for 6.8-rc5.

  Included in here are:

   - lots of iio driver fixes for reported issues

   - nvmem device naming fixup for reported problem

   - interconnect driver fixes for reported issues

  All of these have been in linux-next for a while with no reported the
  issues (the nvmem patch was included in a different branch in
  linux-next before sent to me for inclusion here)"

* tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  nvmem: include bit index in cell sysfs file name
  iio: adc: ad4130: only set GPIO_CTRL if pin is unused
  iio: adc: ad4130: zero-initialize clock init data
  interconnect: qcom: x1e80100: Add missing ACV enable_mask
  interconnect: qcom: sm8650: Use correct ACV enable_mask
  iio: accel: bma400: Fix a compilation problem
  iio: commom: st_sensors: ensure proper DMA alignment
  iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP
  iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier
  staging: iio: ad5933: fix type mismatch regression
  iio: humidity: hdc3020: fix temperature offset
  iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup()
  iio: adc: ad_sigma_delta: ensure proper DMA alignment
  iio: imu: adis: ensure proper DMA alignment
  iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
  iio: imu: bno055: serdev requires REGMAP
  iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
  iio: pressure: bmp280: Add missing bmp085 to SPI id table
  iio: core: fix memleak in iio_device_register_sysfs
  interconnect: qcom: sm8550: Enable sync_state
  ...

Pull tty / serial fixes from Greg KH:
 "Here are three small tty and serial driver fixes for 6.8-rc5:

   - revert a 8250_pci1xxxx off-by-one change that was incorrect

   - two changes to fix the transmit path of the mxs-auart driver,
     fixing a regression in the 6.2 release

  All of these have been in linux-next for over a week with no reported
  issues"

* tag 'tty-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: mxs-auart: fix tx
  serial: core: introduce uart_port_tx_flags()
  serial: 8250_pci1xxxx: partially revert off by one patch

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are two small fixes for 6.8-rc5:

   - thunderbolt to fix a reported issue on many platforms

   - dwc3 driver revert of a commit that caused problems in -rc1

  Both of these changes have been in linux-next for over a week with no
  reported issues"

* tag 'usb-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "usb: dwc3: Support EBC feature of DWC_usb31"
  thunderbolt: Fix setting the CNS bit in ROUTER_CS_5

Pull media fixes from Mauro Carvalho Chehab:

 - regression fix for rkisp1 shared IRQ logic

 - fix atomisp breakage due to a kAPI change

 - permission fix for remote controller BPF support

 - memleak fix in ir_toy driver

 - Kconfig dependency fix for pwm-ir-rx

* tag 'media/v6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: pwm-ir-tx: Depend on CONFIG_HIGH_RES_TIMERS
  media: ir_toy: fix a memleak in irtoy_tx
  media: rc: bpf attach/detach requires write permission
  media: atomisp: Adjust for v4l2_subdev_state handling changes in 6.8
  media: rkisp1: Fix IRQ handling due to shared interrupts
  media: Revert "media: rkisp1: Drop IRQF_SHARED"

Pull pci fixes from Bjorn Helgaas:

 - Keep bridges in D0 if we need to poll downstream devices for PME to
   resolve a v6.6 regression where we failed to enumerate devices below
   bridges put in D3hot by runtime PM, e.g., NVMe drives connected via
   Thunderbolt or USB4 docks (Alex Williamson)

 - Add Siddharth Vadapalli as PCI TI DRA7XX/J721E reviewer

* tag 'pci-v6.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  MAINTAINERS: Add Siddharth Vadapalli as PCI TI DRA7XX/J721E reviewer
  PCI: Fix active state requirement in PME polling

Merge tag 'probes-fixes-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probes fix from Masami Hiramatsu:

 - tracing/probes: Fix BTF structure member finder to find the members
   which are placed after any anonymous union member correctly.

* tag 'probes-fixes-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/probes: Fix to search structure fields correctly

Pull smb client fixes from Steve French:
 "Five smb3 client fixes, most also for stable:

   - Two multichannel fixes (one to fix potential handle leak on retry)

   - Work around possible serious data corruption (due to change in
     folios in 6.3, for cases when non standard maximum write size
     negotiated)

   - Symlink creation fix

   - Multiuser automount fix"

* tag '6.8-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: Fix regression in writes when non-standard maximum write size negotiated
  smb: client: handle path separator of created SMB symlinks
  smb: client: set correct id, uid and cruid for multiuser automounts
  cifs: update the same create_guid on replay
  cifs: fix underflow in parse_server_interfaces()

The Linux kernel project now has the ability to assign CVEs to fixed
issues, so document the process and how individual developers can get a
CVE if one is not automatically assigned for their fixes.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/2024021731-essence-sadness-28fd@gregkhSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix to search a field from the structure which has anonymous union
correctly.
Since the reference `type` pointer was updated in the loop, the search
loop suddenly aborted where it hits an anonymous union. Thus it can not
find the field after the anonymous union. This avoids updating the
cursor `type` pointer in the loop.

Link: https://lore.kernel.org/all/170791694361.389532.10047514554799419688.stgit@devnote2/

Fixes: 302db0f5 ("tracing/probes: Add a function to search a member of a struct/union")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Merge tag 'i2c-host-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

Three fixes are included here. Two are strictly hardware-related
for the i801 and qcom-geni devices. Meanwhile, a fix from Arnd
addresses a compilation error encountered during compile test on
powerpc.

Since I have been contributing to the driver for a while and wish to help
with the review process, add myself as a reviewer.

Link: https://lore.kernel.org/r/20240216065926.473805-1-s-vadapalli@ti.comSigned-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Pull SCSI fixes from James Bottomley:
 "Three fixes: the two fnic ones are a revert and a refix, which is why
  the diffstat is a bit big. The target one also extracts a function to
  add a check for configuration and so looks bigger than it is"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: fnic: Move fnic_fnic_flush_tx() to a work queue
  scsi: Revert "scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock"
  scsi: target: Fix unmap setup during configuration