- 05 Feb, 2023 1 commit
-
-
Christoph Hellwig authored
Set BLK_MQ_F_BLOCKING so that the block layer always calls ->queue_rq from process context and drop the driver internal workqueue. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Richard Weinberger <richard@nod.at>
-
- 02 Feb, 2023 30 commits
-
-
Zhang Xiaoxu authored
There is a list_del corruption when remove the jffs2 module: list_del corruption, ffffffffa0623e60->next is NULL WARNING: CPU: 6 PID: 6332 at lib/list_debug.c:49 __list_del_entry_valid+0x98/0x130 Modules linked in: jffs2(-) ] CPU: 6 PID: 6332 Comm: rmmod Tainted: G W 6.1.0-rc2+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 RIP: 0010:__list_del_entry_valid+0x98/0x130 ... Call Trace: <TASK> jffs2_unregister_compressor+0x3e/0xe0 [jffs2] jffs2_zlib_exit+0x11/0x30 [jffs2] jffs2_compressors_exit+0x1e/0x30 [jffs2] exit_jffs2_fs+0x16/0x44f [jffs2] __do_sys_delete_module.constprop.0+0x244/0x370 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 If one of the compressor initialize failed, the module always insert success since jffs2_compressors_init() always return success, then something bad may happen during remove the module. For this scenario, let's insmod failed. Signed-off-by:
Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
-
Zhang Xiaoxu authored
The initialized compressors should be released if one of them initialize fail, this is the pre-patch for fix the problem, use function instead of the macro in jffs2_compressors_init() to simplify the codes, no functional change intended. Signed-off-by:
-
Yu Zhe authored
There is a spelling mistake in comment. Fix it. Signed-off-by:
Yu Zhe <yuzhe@nfschina.com> Signed-off-by:
-
Yang Li authored
Fix function name in fs/ubifs/io.c kernel-doc comment to remove some warnings found by clang(make W=1 LLVM=1). fs/ubifs/io.c:497: warning: expecting prototype for wbuf_timer_callback(). Prototype was for wbuf_timer_callback_nolock() instead fs/ubifs/io.c:513: warning: expecting prototype for new_wbuf_timer(). Prototype was for new_wbuf_timer_nolock() instead fs/ubifs/io.c:538: warning: expecting prototype for cancel_wbuf_timer(). Prototype was for cancel_wbuf_timer_nolock() instead Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Yang Li authored
Remove warnings found by running scripts/kernel-doc, which is caused by using 'make W=1'. fs/ubifs/journal.c:1221: warning: Function parameter or member 'old_inode' not described in 'ubifs_jnl_rename' fs/ubifs/journal.c:1221: warning: Function parameter or member 'old_nm' not described in 'ubifs_jnl_rename' fs/ubifs/journal.c:1221: warning: Function parameter or member 'new_inode' not described in 'ubifs_jnl_rename' fs/ubifs/journal.c:1221: warning: Function parameter or member 'new_nm' not described in 'ubifs_jnl_rename' fs/ubifs/journal.c:1221: warning: Function parameter or member 'whiteout' not described in 'ubifs_jnl_rename' fs/ubifs/journal.c:1221: warning: Excess function parameter 'old_dentry' description in 'ubifs_jnl_rename' fs/ubifs/journal.c:1221: warning: Excess function parameter 'new_dentry' description in 'ubifs_jnl_rename' Reported-by:
Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by:
-
Jiapeng Chong authored
drivers/mtd/ubi/fastmap.c:104: warning: expecting prototype for new_fm_vhdr(). Prototype was for new_fm_vbuf() instead. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2289Reported-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Zhihao Cheng authored
Following process will trigger an infinite loop in ubi_wl_put_peb(): ubifs_bgt ubi_bgt ubifs_leb_unmap ubi_leb_unmap ubi_eba_unmap_leb ubi_wl_put_peb wear_leveling_worker e1 = rb_entry(rb_first(&ubi->used) e2 = get_peb_for_wl(ubi) ubi_io_read_vid_hdr // return err (flash fault) out_error: ubi->move_from = ubi->move_to = NULL wl_entry_destroy(ubi, e1) ubi->lookuptbl[e->pnum] = NULL retry: e = ubi->lookuptbl[pnum]; // return NULL if (e == ubi->move_from) { // NULL == NULL gets true goto retry; // infinite loop !!! $ top PID USER PR NI VIRT RES SHR S %CPU %MEM COMMAND 7676 root 20 0 0 0 0 R 100.0 0.0 ubifs_bgt0_0 Fix it by: 1) Letting ubi_wl_put_peb() returns directly if wearl leveling entry has been removed from 'ubi->lookuptbl'. 2) Using 'ubi->wl_lock' protecting wl entry deletion to preventing an use-after-free problem for wl entry in ubi_wl_put_peb(). Fetch a reproducer in [Link]. Fixes: 43f9b25a ("UBI: bugfix: protect from volume removal") Fixes: ee59ba8b ("UBI: Fix stale pointers in ubi->lookuptbl") Link: https://bugzilla.kernel.org/show_bug.cgi?id=216111Signed-off-by: -
Zhihao Cheng authored
Wear-leveling entry could be freed in error path, which may be accessed again in eraseblk_count_seq_show(), for example: __erase_worker eraseblk_count_seq_show wl = ubi->lookuptbl[*block_number] if (wl) wl_entry_destroy ubi->lookuptbl[e->pnum] = NULL kmem_cache_free(ubi_wl_entry_slab, e) erase_count = wl->ec // UAF! Wear-leveling entry updating/accessing in ubi->lookuptbl should be protected by ubi->wl_lock, fix it by adding ubi->wl_lock to serialize wl entry accessing between wl_entry_destroy() and eraseblk_count_seq_show(). Fetch a reproducer in [Link]. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216305 Fixes: 7bccd12d ("ubi: Add debugfs file for tracking PEB state") Fixes: 801c135c ("UBI: Unsorted Block Images") Signed-off-by: -
Zhihao Cheng authored
After disabling fastmap(ubi->fm_disabled = 1), fastmap won't be updated, fm_anchor PEB is missed being scheduled for erasing. Besides, fm_anchor PEB may have smallest erase count, it doesn't participate wear-leveling. The difference of erase count between fm_anchor PEB and other PEBs will be larger and larger later on. In which situation fastmap can be disabled? Initially, we have an UBI image with fastmap. Then the image will be atttached without module parameter 'fm_autoconvert', ubi turns to full scanning mode in one random attaching process(eg. bad fastmap caused by powercut), ubi fastmap is disabled since then. Fix it by not getting fm_anchor if fastmap is disabled in ubi_refill_pools(). Fetch a reproducer in [Link]. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216341 Fixes: 4b68bf9a ("ubi: Select fastmap anchor PEBs considering ...") Signed-off-by:
-
Zhihao Cheng authored
There are two states for ubifs writing pages: 1. Dirty, Private 2. Not Dirty, Not Private The normal process cannot go to ubifs_releasepage() which means there exists pages being private but not dirty. Reproducer[1] shows that it could occur (which maybe related to [2]) with following process: PA PB PC lock(page)[PA] ubifs_write_end attach_page_private // set Private __set_page_dirty_nobuffers // set Dirty unlock(page) write_cache_pages[PA] lock(page) clear_page_dirty_for_io(page) // clear Dirty ubifs_writepage do_truncation[PB] truncate_setsize i_size_write(inode, newsize) // newsize = 0 i_size = i_size_read(inode) // i_size = 0 end_index = i_size >> PAGE_SHIFT if (page->index > end_index) goto out // jump out: unlock(page) // Private, Not Dirty generic_fadvise[PC] lock(page) invalidate_inode_page try_to_release_page ubifs_releasepage ubifs_assert(c, 0) // bad assertion! unlock(page) truncate_pagecache[PB] Then we may get following assertion failed: UBIFS error (ubi0:0 pid 1683): ubifs_assert_failed [ubifs]: UBIFS assert failed: 0, in fs/ubifs/file.c:1513 UBIFS warning (ubi0:0 pid 1683): ubifs_ro_mode [ubifs]: switched to read-only mode, error -22 CPU: 2 PID: 1683 Comm: aa Not tainted 5.16.0-rc5-00184-g0bca5994cacc-dirty #308 Call Trace: dump_stack+0x13/0x1b ubifs_ro_mode+0x54/0x60 [ubifs] ubifs_assert_failed+0x4b/0x80 [ubifs] ubifs_releasepage+0x67/0x1d0 [ubifs] try_to_release_page+0x57/0xe0 invalidate_inode_page+0xfb/0x130 __invalidate_mapping_pages+0xb9/0x280 invalidate_mapping_pagevec+0x12/0x20 generic_fadvise+0x303/0x3c0 ksys_fadvise64_64+0x4c/0xb0 [1] https://bugzilla.kernel.org/show_bug.cgi?id=215373 [2] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by: -
Zhihao Cheng authored
There are two states for ubifs writing pages: 1. Dirty, Private 2. Not Dirty, Not Private There is a third possibility which maybe related to [1] that page is private but not dirty caused by following process: PA lock(page) ubifs_write_end attach_page_private // set Private __set_page_dirty_nobuffers // set Dirty unlock(page) write_cache_pages lock(page) clear_page_dirty_for_io(page) // clear Dirty ubifs_writepage write_inode // fail, goto out, following codes are not executed // do_writepage // set_page_writeback // set Writeback // detach_page_private // clear Private // end_page_writeback // clear Writeback out: unlock(page) // Private, Not Dirty PB ksys_fadvise64_64 generic_fadvise invalidate_inode_page // page is neither Dirty nor Writeback invalidate_complete_page // page_has_private is true try_to_release_page ubifs_releasepage ubifs_assert(c, 0) !!! Then we may get following assertion failed: UBIFS error (ubi0:0 pid 1492): ubifs_assert_failed [ubifs]: UBIFS assert failed: 0, in fs/ubifs/file.c:1499 UBIFS warning (ubi0:0 pid 1492): ubifs_ro_mode [ubifs]: switched to read-only mode, error -22 CPU: 2 PID: 1492 Comm: aa Not tainted 5.16.0-rc2-00012-g7bb767dee0ba-dirty Call Trace: dump_stack+0x13/0x1b ubifs_ro_mode+0x54/0x60 [ubifs] ubifs_assert_failed+0x4b/0x80 [ubifs] ubifs_releasepage+0x7e/0x1e0 [ubifs] try_to_release_page+0x57/0xe0 invalidate_inode_page+0xfb/0x130 invalidate_mapping_pagevec+0x12/0x20 generic_fadvise+0x303/0x3c0 vfs_fadvise+0x35/0x40 ksys_fadvise64_64+0x4c/0xb0 Jump [2] to find a reproducer. [1] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty [2] https://bugzilla.kernel.org/show_bug.cgi?id=215357 Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by: -
Zhihao Cheng authored
Following process will cause a memleak for copied up znode: dirty_cow_znode zn = copy_znode(c, znode); err = insert_old_idx(c, zbr->lnum, zbr->offs); if (unlikely(err)) return ERR_PTR(err); // No one refers to zn. Fix it by adding copied znode back to tnc, then it will be freed by ubifs_destroy_tnc_subtree() while closing tnc. Fetch a reproducer in [Link]. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216705 Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by: -
Zhihao Cheng authored
Dirty znodes will be written on flash in committing process with following states: process A | znode state ------------------------------------------------------ do_commit | DIRTY_ZNODE ubifs_tnc_start_commit | DIRTY_ZNODE get_znodes_to_commit | DIRTY_ZNODE | COW_ZNODE layout_commit | DIRTY_ZNODE | COW_ZNODE fill_gap | 0 write master | 0 or OBSOLETE_ZNODE process B | znode state ------------------------------------------------------ do_commit | DIRTY_ZNODE[1] ubifs_tnc_start_commit | DIRTY_ZNODE get_znodes_to_commit | DIRTY_ZNODE | COW_ZNODE ubifs_tnc_end_commit | DIRTY_ZNODE | COW_ZNODE write_index | 0 write master | 0 or OBSOLETE_ZNODE[2] or | DIRTY_ZNODE[3] [1] znode is dirtied without concurrent committing process [2] znode is copied up (re-dirtied by other process) before cleaned up in committing process [3] znode is re-dirtied after cleaned up in committing process Currently, the clean znode count is updated in free_obsolete_znodes(), which is called only in normal path. If do_commit failed, clean znode count won't be updated, which triggers a failure ubifs assertion[4] in ubifs_tnc_close(): ubifs_assert_failed [ubifs]: UBIFS assert failed: freed == n [4] Commit 380347e9 ("UBIFS: Add an assertion for clean_zn_cnt"). Fix it by re-statisticing cleaned znode count in tnc_destroy_cnext(). Fetch a reproducer in [Link]. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216704 Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by: -
ZhaoLong Wang authored
Some interface files in debugfs support the read method dfs_file_read(), but their rwx permissions is shown as unreadable. In the user mode, the following problem can be clearly seen: # ls -l /sys/kernel/debug/ubi/ubi0/ total 0 --w------- 1 root root 0 Oct 22 16:26 chk_fastmap --w------- 1 root root 0 Oct 22 16:26 chk_gen --w------- 1 root root 0 Oct 22 16:26 chk_io -r-------- 1 root root 0 Oct 22 16:26 detailed_erase_block_info --w------- 1 root root 0 Oct 22 16:26 tst_disable_bgt --w------- 1 root root 0 Oct 22 16:26 tst_emulate_bitflips --w------- 1 root root 0 Oct 22 16:26 tst_emulate_io_failures --w------- 1 root root 0 Oct 22 16:26 tst_emulate_power_cut --w------- 1 root root 0 Oct 22 16:26 tst_emulate_power_cut_max --w------- 1 root root 0 Oct 22 16:26 tst_emulate_power_cut_min It shows that these files do not have read permission 'r', but we can actually read their contents. # echo 1 > /sys/kernel/debug/ubi/ubi0/chk_io # cat /sys/kernel/debug/ubi/ubi0/chk_io 1 User's permission access is determined by capabilities. Of course, the root user is not restricted from reading these files. When reading a debugfs file, the process is as follows: ksys_read() vfs_read() if (file->f_op->read) file->f_op->read() full_proxy_open() real_fops->read() dfs_file_read() -- Read method of debugfs file. else if (file->f_op->read_iter) new_sync_read() else ret = -EINVAL -- Return -EINVAL if no read method. This indicates that the debugfs file can be read as long as the read method of the debugfs file is registered. This patch adds the read permission display for file that support the read method. Signed-off-by:ZhaoLong Wang <wangzhaolong1@huawei.com> Signed-off-by:
-
Yang Yingliang authored
It willl cause null-ptr-deref in the following case: uif_init() ubi_add_volume() cdev_add() -> if it fails, call kill_volumes() device_register() kill_volumes() -> if ubi_add_volume() fails call this function ubi_free_volume() cdev_del() device_unregister() -> trying to delete a not added device, it causes null-ptr-deref So in ubi_free_volume(), it delete devices whether they are added or not, it will causes null-ptr-deref. Handle the error case whlie calling ubi_add_volume() to fix this problem. If add volume fails, set the corresponding vol to null, so it can not be accessed in kill_volumes() and release the resource in ubi_add_volume() error path. Fixes: 801c135c ("UBI: Unsorted Block Images") Suggested-by:Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
-
ZhaoLong Wang authored
The UBI driver can use the IOCTL to disable the fastmap after the mainline 669d2044 ("ubi: fastmap: Add fastmap control support for 'UBI_IOCATT' ioctl"). To destroy the fastmap on a old image, we need to reattach the device in user space. However, if the UBI driver build in kernel and the UBI volume is the root partition, the UBI device cannot be reattached in user space. To disable fastmap in this case, the UBI must provide the kernel cmdline parameters to disable fastmap during attach. This patch add 'enable_fm' as 5th module init parameter of mtd=xx to control fastmap enable or not. When the value is 0, fastmap will not create and existed fastmap will destroyed for the given ubi device. Default value is 0. To enable or disable fastmap during module loading, fm_autoconvert must be set to non-zero. +-----------------+---------------+---------------------------+ | \ | enable_fm=0 | enable_fm=1 | +-----------------+---------------+---------------------------+ |fm_autoconvert=Y | disable fm | enable fm | +---------------------------------+---------------------------+ |fm_autoconvert=N | disable fm | Enable fastmap if fastmap | | | | exists on the old image | +-------------------------------------------------------------+ Example: # - Attach mtd1 to ubi1, disable fastmap, mtd2 to ubi2, enable fastmap. # modprobe ubi mtd=1,0,0,1,0 mtd=2,0,0,2,1 fm_autoconvert=1 # - If 5th parameter is not specified, the value is 0, fastmap is disable # modprobe ubi mtd=1 fm_autoconvert=1 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216623Signed-off-by:
-
Li Zetao authored
kmemleak reported a sequence of memory leaks, and show them as following: unreferenced object 0xffff8881575f8400 (size 1024): comm "mount", pid 19625, jiffies 4297119604 (age 20.383s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8176cecd>] __kmalloc+0x4d/0x150 [<ffffffffa0406b2b>] ubifs_mount+0x307b/0x7170 [ubifs] [<ffffffff819fa8fd>] legacy_get_tree+0xed/0x1d0 [<ffffffff81936f2d>] vfs_get_tree+0x7d/0x230 [<ffffffff819b2bd4>] path_mount+0xdd4/0x17b0 [<ffffffff819b37aa>] __x64_sys_mount+0x1fa/0x270 [<ffffffff83c14295>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 unreferenced object 0xffff8881798a6e00 (size 512): comm "mount", pid 19677, jiffies 4297121912 (age 37.816s) hex dump (first 32 bytes): 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace: [<ffffffff8176cecd>] __kmalloc+0x4d/0x150 [<ffffffffa0418342>] ubifs_wbuf_init+0x52/0x480 [ubifs] [<ffffffffa0406ca5>] ubifs_mount+0x31f5/0x7170 [ubifs] [<ffffffff819fa8fd>] legacy_get_tree+0xed/0x1d0 [<ffffffff81936f2d>] vfs_get_tree+0x7d/0x230 [<ffffffff819b2bd4>] path_mount+0xdd4/0x17b0 [<ffffffff819b37aa>] __x64_sys_mount+0x1fa/0x270 [<ffffffff83c14295>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 The problem is that the ubifs_wbuf_init() returns an error in the loop which in the alloc_wbufs(), then the wbuf->buf and wbuf->inodes that were successfully alloced before are not freed. Fix it by adding error hanging path in alloc_wbufs() which frees the memory alloced before when ubifs_wbuf_init() returns an error. Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:Li Zetao <lizetao1@huawei.com> Reviewed-by:
-
Li Zetao authored
There is a memory leaks problem reported by kmemleak: unreferenced object 0xffff888102007a00 (size 128): comm "ubirsvol", pid 32090, jiffies 4298464136 (age 2361.231s) hex dump (first 32 bytes): ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ backtrace: [<ffffffff8176cecd>] __kmalloc+0x4d/0x150 [<ffffffffa02a9a36>] ubi_eba_create_table+0x76/0x170 [ubi] [<ffffffffa029764e>] ubi_resize_volume+0x1be/0xbc0 [ubi] [<ffffffffa02a3321>] ubi_cdev_ioctl+0x701/0x1850 [ubi] [<ffffffff81975d2d>] __x64_sys_ioctl+0x11d/0x170 [<ffffffff83c142a5>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 This is due to a mismatch between create and destroy interfaces, and in detail that "new_eba_tbl" created by ubi_eba_create_table() but destroyed by kfree(), while will causing "new_eba_tbl->entries" not freed. Fix it by replacing kfree(new_eba_tbl) with ubi_eba_destroy_table(new_eba_tbl) Fixes: 799dca34 ("UBI: hide EBA internals") Signed-off-by:
-
Li Zetao authored
There is an use-after-free problem reported by KASAN: ================================================================== BUG: KASAN: use-after-free in ubi_eba_copy_table+0x11f/0x1c0 [ubi] Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735 CPU: 2 PID: 4735 Comm: ubirsvol Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report+0x171/0x472 kasan_report+0xad/0x130 ubi_eba_copy_table+0x11f/0x1c0 [ubi] ubi_resize_volume+0x4f9/0xbc0 [ubi] ubi_cdev_ioctl+0x701/0x1850 [ubi] __x64_sys_ioctl+0x11d/0x170 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> When ubi_change_vtbl_record() returns an error in ubi_resize_volume(), "new_eba_tbl" will be freed on error handing path, but it is holded by "vol->eba_tbl" in ubi_eba_replace_table(). It means that the liftcycle of "vol->eba_tbl" and "vol" are different, so when resizing volume in next time, it causing an use-after-free fault. Fix it by not freeing "new_eba_tbl" after it replaced in ubi_eba_replace_table(), while will be freed in next volume resizing. Fixes: 801c135c ("UBI: Unsorted Block Images") Signed-off-by:
-
Zhihao Cheng authored
UBIFS calculates available space by c->main_bytes - c->lst.total_used (which means non-index lebs' free and dirty space is accounted into total available), then index lebs and four lebs (one for gc_lnum, one for deletions, two for journal heads) are deducted. In following situation, ubifs may get -ENOSPC from make_reservation(): LEB 84: DATAHD free 122880 used 1920 dirty 2176 dark 6144 LEB 110:DELETION free 126976 used 0 dirty 0 dark 6144 (empty) LEB 201:gc_lnum free 126976 used 0 dirty 0 dark 6144 LEB 272:GCHD free 77824 used 47672 dirty 1480 dark 6144 LEB 356:BASEHD free 0 used 39776 dirty 87200 dark 6144 OTHERS: index lebs, zero-available non-index lebs UBIFS calculates the available bytes is 6888 (How to calculate it: 126976 * 5[remain main bytes] - 1920[used] - 47672[used] - 39776[used] - 126976 * 1[deletions] - 126976 * 1[gc_lnum] - 126976 * 2[journal heads] - 6144 * 5[dark] = 6888) after doing budget, however UBIFS cannot use BASEHD's dirty space(87200), because UBIFS cannot find next BASEHD to reclaim current BASEHD. (c->bi.min_idx_lebs equals to c->lst.idx_lebs, the empty leb won't be found by ubifs_find_free_space(), and dirty index lebs won't be picked as gced lebs. All non-index lebs has dirty space less then c->dead_wm, non-index lebs won't be picked as gced lebs either. So new free lebs won't be produced.). See more details in Link. To fix it, reserve one leb for each journal head while doing budget. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216562 Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:
-
Zhihao Cheng authored
If target inode is a special file (eg. block/char device) with nlink count greater than 1, the inode with ui->data will be re-written on disk. However, UBIFS losts target inode's data_len while doing space budget. Bad space budget may let make_reservation() return with -ENOSPC, which could turn ubifs to read-only mode in do_writepage() process. Fetch a reproducer in [Link]. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216494 Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:
-
Zhihao Cheng authored
Each dirty inode should reserve 'c->bi.inode_budget' bytes in space budget calculation. Currently, space budget for dirty inode reports more space than what UBIFS actually needs to write. Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:
-
Zhihao Cheng authored
Just like other operations (eg. ubifs_create, do_rename), add comments and debug information for ubifs_xrename(). Signed-off-by:
-
Zhihao Cheng authored
There is no space budget for ubifs_xrename(). It may let make_reservation() return with -ENOSPC, which could turn ubifs to read-only mode in do_writepage() process. Fix it by adding space budget for ubifs_xrename(). Fetch a reproducer in [Link]. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216569 Fixes: 9ec64962 ("ubifs: Implement RENAME_EXCHANGE") Signed-off-by:
-
Zhihao Cheng authored
Fix bad space budget when symlink file is encrypted. Bad space budget may let make_reservation() return with -ENOSPC, which could turn ubifs to read-only mode in do_writepage() process. Fetch a reproducer in [Link]. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216490 Fixes: ca7f85be ("ubifs: Add support for encrypted symlinks") Signed-off-by:
-
Mårten Lindahl authored
If volume size is not multiple of the sector size 512 a warning is printed saying that the last non-sector aligned bytes will be ignored. This should be valid for resizable volumes, but when creating static volumes which are read only this will always be printed even if the unaligned data is deliberate. The message is still valid but the severity should be lowered for static volumes. Signed-off-by:
Mårten Lindahl <marten.lindahl@axis.com> Signed-off-by:
-
Liu Shixin authored
When insmod ubifs.ko, a kmemleak reported as below: unreferenced object 0xffff88817fb1a780 (size 8): comm "insmod", pid 25265, jiffies 4295239702 (age 100.130s) hex dump (first 8 bytes): 75 62 69 66 73 00 ff ff ubifs... backtrace: [<ffffffff81b3fc4c>] slab_post_alloc_hook+0x9c/0x3c0 [<ffffffff81b44bf3>] __kmalloc_track_caller+0x183/0x410 [<ffffffff8198d3da>] kstrdup+0x3a/0x80 [<ffffffff8198d486>] kstrdup_const+0x66/0x80 [<ffffffff83989325>] kvasprintf_const+0x155/0x190 [<ffffffff83bf55bb>] kobject_set_name_vargs+0x5b/0x150 [<ffffffff83bf576b>] kobject_set_name+0xbb/0xf0 [<ffffffff8100204c>] do_one_initcall+0x14c/0x5a0 [<ffffffff8157e380>] do_init_module+0x1f0/0x660 [<ffffffff815857be>] load_module+0x6d7e/0x7590 [<ffffffff8158644f>] __do_sys_finit_module+0x19f/0x230 [<ffffffff815866b3>] __x64_sys_finit_module+0x73/0xb0 [<ffffffff88c98e85>] do_syscall_64+0x35/0x80 [<ffffffff88e00087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd When kset_register() failed, we should call kset_put to cleanup it. Fixes: 2e3cbf42 ("ubifs: Export filesystem error counters") Signed-off-by:Liu Shixin <liushixin2@huawei.com> Signed-off-by:
-
Li Hua authored
With CONFIG_UBIFS_FS_AUTHENTICATION not set, the compiler can assume that ubifs_node_check_hash() is never true and drops the call to ubifs_bad_hash(). Is CONFIG_CC_OPTIMIZE_FOR_SIZE enabled this optimization does not happen anymore. So When CONFIG_UBIFS_FS and CONFIG_CC_OPTIMIZE_FOR_SIZE is enabled but CONFIG_UBIFS_FS_AUTHENTICATION is not set, the build errors is as followd: ERROR: modpost: "ubifs_bad_hash" [fs/ubifs/ubifs.ko] undefined! Fix it by add no-op ubifs_bad_hash() for the CONFIG_UBIFS_FS_AUTHENTICATION=n case. Fixes: 16a26b20 ("ubifs: authentication: Add hashes to index nodes") Signed-off-by:Li Hua <hucool.lihua@huawei.com> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
George Kennedy authored
Ensure that the VID header offset + VID header size does not exceed the allocated area to avoid slab OOB. BUG: KASAN: slab-out-of-bounds in crc32_body lib/crc32.c:111 [inline] BUG: KASAN: slab-out-of-bounds in crc32_le_generic lib/crc32.c:179 [inline] BUG: KASAN: slab-out-of-bounds in crc32_le_base+0x58c/0x626 lib/crc32.c:197 Read of size 4 at addr ffff88802bb36f00 by task syz-executor136/1555 CPU: 2 PID: 1555 Comm: syz-executor136 Tainted: G W 6.0.0-1868 #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7860+a7792d29 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x85/0xad lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold.13+0xb6/0x6bb mm/kasan/report.c:433 kasan_report+0xa7/0x11b mm/kasan/report.c:495 crc32_body lib/crc32.c:111 [inline] crc32_le_generic lib/crc32.c:179 [inline] crc32_le_base+0x58c/0x626 lib/crc32.c:197 ubi_io_write_vid_hdr+0x1b7/0x472 drivers/mtd/ubi/io.c:1067 create_vtbl+0x4d5/0x9c4 drivers/mtd/ubi/vtbl.c:317 create_empty_lvol drivers/mtd/ubi/vtbl.c:500 [inline] ubi_read_volume_table+0x67b/0x288a drivers/mtd/ubi/vtbl.c:812 ubi_attach+0xf34/0x1603 drivers/mtd/ubi/attach.c:1601 ubi_attach_mtd_dev+0x6f3/0x185e drivers/mtd/ubi/build.c:965 ctrl_cdev_ioctl+0x2db/0x347 drivers/mtd/ubi/cdev.c:1043 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x193/0x213 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3e/0x86 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0x0 RIP: 0033:0x7f96d5cf753d Code: RSP: 002b:00007fffd72206f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f96d5cf753d RDX: 0000000020000080 RSI: 0000000040186f40 RDI: 0000000000000003 RBP: 0000000000400cd0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000400be0 R13: 00007fffd72207e0 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 1555: kasan_save_stack+0x20/0x3d mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:437 [inline] ____kasan_kmalloc mm/kasan/common.c:516 [inline] __kasan_kmalloc+0x88/0xa3 mm/kasan/common.c:525 kasan_kmalloc include/linux/kasan.h:234 [inline] __kmalloc+0x138/0x257 mm/slub.c:4429 kmalloc include/linux/slab.h:605 [inline] ubi_alloc_vid_buf drivers/mtd/ubi/ubi.h:1093 [inline] create_vtbl+0xcc/0x9c4 drivers/mtd/ubi/vtbl.c:295 create_empty_lvol drivers/mtd/ubi/vtbl.c:500 [inline] ubi_read_volume_table+0x67b/0x288a drivers/mtd/ubi/vtbl.c:812 ubi_attach+0xf34/0x1603 drivers/mtd/ubi/attach.c:1601 ubi_attach_mtd_dev+0x6f3/0x185e drivers/mtd/ubi/build.c:965 ctrl_cdev_ioctl+0x2db/0x347 drivers/mtd/ubi/cdev.c:1043 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x193/0x213 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3e/0x86 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0x0 The buggy address belongs to the object at ffff88802bb36e00 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes to the right of 256-byte region [ffff88802bb36e00, ffff88802bb36f00) The buggy address belongs to the physical page: page:00000000ea4d1263 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2bb36 head:00000000ea4d1263 order:1 compound_mapcount:0 compound_pincount:0 flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0010200 ffffea000066c300 dead000000000003 ffff888100042b40 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88802bb36e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88802bb36e80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff88802bb36f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88802bb36f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88802bb37000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 801c135c ("UBI: Unsorted Block Images") Reported-by:syzkaller <syzkaller@googlegroups.com> Signed-off-by:
George Kennedy <george.kennedy@oracle.com> Signed-off-by:
-
Yifei Liu authored
Bug description and fix: 1. Write data to a file, say all 1s from offset 0 to 16. 2. Truncate the file to a smaller size, say 8 bytes. 3. Write new bytes (say 2s) from an offset past the original size of the file, say at offset 20, for 4 bytes. This is supposed to create a "hole" in the file, meaning that the bytes from offset 8 (where it was truncated above) up to the new write at offset 20, should all be 0s (zeros). 4. Flush all caches using "echo 3 > /proc/sys/vm/drop_caches" (or unmount and remount) the f/s. 5. Check the content of the file. It is wrong. The 1s that used to be between bytes 9 and 16, before the truncation, have REAPPEARED (they should be 0s). We wrote a script and helper C program to reproduce the bug (reproduce_jffs2_write_begin_issue.sh, write_file.c, and Makefile). We can make them available to anyone. The above example is shown when writing a small file within the same first page. But the bug happens for larger files, as long as steps 1, 2, and 3 above all happen within the same page. The problem was traced to the jffs2_write_begin code, where it goes into an 'if' statement intended to handle writes past the current EOF (i.e., writes that may create a hole). The code computes a 'pageofs' that is the floor of the write position (pos), aligned to the page size boundary. In other words, 'pageofs' will never be larger than 'pos'. The code then sets the internal jffs2_raw_inode->isize to the size of max(current inode size, pageofs) but that is wrong: the new file size should be the 'pos', which is larger than both the current inode size and pageofs. Similarly, the code incorrectly sets the internal jffs2_raw_inode->dsize to the difference between the pageofs minus current inode size; instead it should be the current pos minus the current inode size. Finally, inode->i_size was also set incorrectly. The patch below fixes this bug. The bug was discovered using a new tool for finding f/s bugs using model checking, called MCFS (Model Checking File Systems). Signed-off-by:
Yifei Liu <yifeliu@cs.stonybrook.edu> Signed-off-by:
Erez Zadok <ezk@cs.stonybrook.edu> Signed-off-by:
Manish Adkar <madkar@cs.stonybrook.edu> Signed-off-by:
-
- 22 Jan, 2023 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull another io_uring fix from Jens Axboe: "Just a single fix for a regression that happened in this release due to a poll change. Normally I would've just deferred it to next week, but since the original fix got picked up by stable, I think it's better to just send this one off separately. The issue is around the poll race fix, and how it mistakenly also got applied to multishot polling. Those don't need the race fix, and we should not be doing any reissues for that case. Exhaustive test cases were written and committed to the liburing regression suite for the reported issue, and additions for similar issues" * tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux: io_uring/poll: don't reissue in case of poll race on multishot request
-
- 21 Jan, 2023 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char/misc and other subsystem driver fixes for 6.2-rc5 to resolve a few reported issues. They include: - long time pending fastrpc fixes (should have gone into 6.1, my fault) - mei driver/bus fixes and new device ids - interconnect driver fixes for reported problems - vmci bugfix - w1 driver bugfixes for reported problems Almost all of these have been in linux-next with no reported problems, the rest have all passed 0-day bot testing in my tree and on the mailing lists where they have sat too long due to me taking a long time to catch up on my pending patch queue" * tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: VMCI: Use threaded irqs instead of tasklets misc: fastrpc: Pass bitfield into qcom_scm_assign_mem gsmi: fix null-deref in gsmi_get_variable misc: fastrpc: Fix use-after-free race condition for maps misc: fastrpc: Don't remove map on creater_process and device_release misc: fastrpc: Fix use-after-free and race in fastrpc_map_find misc: fastrpc: fix error code in fastrpc_req_mmap() mei: me: add meteor lake point M DID mei: bus: fix unlink on bus in error path w1: fix WARNING after calling w1_process() w1: fix deadloop in __w1_remove_master_device() comedi: adv_pci1760: Fix PWM instruction handling interconnect: qcom: rpm: Use _optional func for provider clocks interconnect: qcom: msm8996: Fix regmap max_register values interconnect: qcom: msm8996: Provide UFS clocks to A2NoC dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here are three small driver and kernel core fixes for 6.2-rc5. They include: - potential gadget fixup in do_prlimit - device property refcount leak fix - test_async_probe bugfix for reported problem" * tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: prlimit: do_prlimit needs to have a speculation check driver core: Fix test_async_probe_init saves device in wrong array device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fix from Greg KH: "Here is a single staging driver fix for 6.2-rc5. It resolves a build issue reported and Fixed by Arnd in the vc04_services driver. It's been in linux-next this week with no reported problems" * tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vchiq_arm: fix enum vchiq_status return types
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.2-rc5 that resolve a number of tiny reported issues and some new device ids. They include: - new device id for the exar serial driver - speakup tty driver bugfix - atmel serial driver baudrate fixup - stm32 serial driver bugfix and then revert as the bugfix broke the build. That will come back in a later pull request once it is all worked out properly. - amba-pl011 serial driver rs486 mode bugfix - qcom_geni serial driver bugfix Most of these have been in linux-next with no reported problems (well, other than the build breakage which generated the revert), the new device id passed 0-day testing" * tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: exar: Add support for Sealevel 7xxxC serial cards Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler" tty: serial: qcom_geni: avoid duplicate struct member init serial: atmel: fix incorrect baudrate setup tty: fix possible null-ptr-defer in spk_ttyio_release serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler serial: amba-pl011: fix high priority character transmission in rs486 mode serial: pch_uart: Pass correct sg to dma_unmap_sg() tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB / Thunderbolt fixes from Greg KH: "Here are a number of small USB and Thunderbolt driver fixes and new device id changes for 6.2-rc5. Included in here are: - thunderbolt bugfixes for reported problems - new usb-serial driver ids added - onboard_hub usb driver fixes for much-reported problems - xhci bugfixes - typec bugfixes - ehci-fsl driver module alias fix - iowarrior header size fix - usb gadget driver fixes All of these, except for the iowarrior fix, have been in linux-next with no reported issues. The iowarrior fix passed the 0-day testing and is a one digit change based on a reported problem in the driver (which was written to a spec, not the real device that is now available)" * tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits) USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100 usb: host: ehci-fsl: Fix module alias usb: dwc3: fix extcon dependency usb: core: hub: disable autosuspend for TI TUSB8041 USB: fix misleading usb_set_intfdata() kernel doc usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate() USB: gadget: Add ID numbers to configfs-gadget driver names usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail usb: gadget: g_webcam: Send color matching descriptor per frame usb: typec: altmodes/displayport: Use proper macro for pin assignment check usb: typec: altmodes/displayport: Fix pin assignment calculation usb: typec: altmodes/displayport: Add pin assignment helper usb: gadget: f_fs: Ensure ep0req is dequeued before free_request usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait usb: misc: onboard_hub: Move 'attach' work to the driver usb: misc: onboard_hub: Invert driver registration order usb: ucsi: Ensure connector delayed work items are flushed usb: musb: fix error return code in omap2430_probe() usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch) xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables ...
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error messages when GNU Make 4.4 is used. - Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y. - Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile. - Support GNU Make 4.4 for scripts/jobserver-exec. - Show clearer error message when kernel/gen_kheaders.sh fails due to missing cpio. * tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kheaders: explicitly validate existence of cpio command scripts: support GNU make 4.4 in jobserver-exec kconfig: Update all declared targets scripts: rpm: make clear that mkspec script contains 4.13 feature init/Kconfig: fix LOCALVERSION_AUTO help text kbuild: fix 'make modules' error when CONFIG_DEBUG_INFO_BTF_MODULES=y kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux init/version-timestamp.c: remove unneeded #include <linux/version.h> docs: kbuild: remove mention to dropped $(objtree) feature
-
Linus Torvalds authored
We potentially have old hashes of the xattr names generated on systems with signed 'char' types. Now that everybody uses '-funsigned-char', those hashes will no longer match. This only happens if you use xattrs names that have the high bit set, which probably doesn't happen in practice, but the xfstest generic/454 shows it. Instead of adding a new "signed xattr hash filesystem" bit and having to deal with all the possible combinations, just calculate the hash both ways if the first one fails, and always generate new hashes with the proper unsigned char version. Reported-by:
kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/oe-lkp/202212291509.704a11c9-oliver.sang@intel.com Link: https://lore.kernel.org/all/CAHk-=whUNjwqZXa-MH9KMmc_CpQpoFKFjAB9ZKHuu=TbsouT4A@mail.gmail.com/ Exposed-by: 3bc753c0 ("kbuild: treat char as always unsigned") Cc: Eric Biggers <ebiggers@kernel.org> Cc: Andreas Dilger <adilger@dilger.ca> Cc: Theodore Ts'o <tytso@mit.edu>, Cc: Jason Donenfeld <Jason@zx2c4.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
