When searching for a free space entry by offset, at tree_search_offset(),
we are supposed to have the btrfs_free_space_ctl's 'tree_lock' held, so
assert that. We have multiple callers of tree_search_offset(), and all
currently hold the necessary lock before calling it.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There are multiple code paths leading to tree_insert_offset(), and each
path takes the necessary locks before tree_insert_offset() is called,
since they do other things that require those locks to be held. This makes
it easy to miss the locking somewhere, so make tree_insert_offset() assert
that the required locks are being held by the calling task.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

For the in-memory component of space caching (free space cache and free
space tree), three of the arguments passed to tree_insert_offset() can
always be taken from the new free space entry that we are about to add.

So simplify tree_insert_offset() to take the new entry instead of the
'offset', 'node' and 'bitmap' arguments. This will also allow to make
further changes simpler.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The are two computations of end offsets at do_trimming() that are not
necessary, as they were previously computed and stored in local const
variables. So just use the variables instead, to make the source code
shorter and easier to read.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At try_merge_free_space(), avoid calling twice rb_prev() to find the
previous node, as that requires looping through the red black tree, so
store the result of the rb_prev() call and then use it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At copy_free_space_cache(), we add a new entry to the block group's ctl
before we free the entry from the temporary ctl. Adding a new entry
requires the allocation of a new struct btrfs_free_space, so we can
avoid a temporary extra allocation by freeing the entry from the
temporary ctl before we add a new entry to the main ctl, which possibly
also reduces the chances for a memory allocation failure in case of very
high memory pressure. So just do that.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

A small code simplification, move the default value of transid to its
initialization and remove the else-statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

[PROBLEM]
When relocation fails (mostly due to checksum mismatch), we only got
very cryptic error messages like:

  BTRFS info (device dm-4): relocating block group 13631488 flags data
  BTRFS warning (device dm-4): csum failed root -9 ino 257 off 0 csum 0x373e1ae3 expected csum 0x98757625 mirror 1
  BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
  BTRFS info (device dm-4): balance: ended with status: -5

The end user has to decipher the above messages and use various tools to
locate the affected files and find a way to fix the problem (mostly
deleting the file).  This is not an easy work even for experienced
developer, not to mention the end users.

[SCRUB IS DOING BETTER]
By contrast, scrub is providing much better error messages:

  BTRFS error (device dm-4): unable to fixup (regular) error at logical 13631488 on dev /dev/mapper/test-scratch1 physical 13631488
  BTRFS warning (device dm-4): checksum error at logical 13631488 on dev /dev/mapper/test-scratch1, physical 13631488, root 5, inode 257, offset 0, length 4096, links 1 (path: file)
  BTRFS info (device dm-4): scrub: finished on devid 1 with status: 0

Which provides the affected files directly to the end user.

[IMPROVEMENT]
Instead of the generic data checksum error messages, which is not doing
a good job for data reloc inodes, this patch introduce a scrub like
backref walking based solution.

When a sector fails its checksum for data reloc inode, we go the
following workflow:

- Get the real logical bytenr
  For data reloc inode, the file offset is the offset inside the block
  group.
  Thus the real logical bytenr is @file_off + @block_group->start.

- Do an extent type check
  If it's tree blocks it's much easier to handle, just go through
  all the tree block backref.

- Do a backref walk and inode path resolution for data extents
  This is mostly the same as scrub.
  But unfortunately we can not reuse the same function as the output
  format is different.

Now the new output would be more user friendly:

  BTRFS info (device dm-4): relocating block group 13631488 flags data
  BTRFS warning (device dm-4): csum failed root -9 ino 257 off 0 logical 13631488 csum 0x373e1ae3 expected csum 0x98757625 mirror 1
  BTRFS warning (device dm-4): checksum error at logical 13631488 mirror 1 root 5 inode 257 offset 0 length 4096 links 1 (path: file)
  BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 2, gen 0
  BTRFS info (device dm-4): balance: ended with status: -5
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Now that btrfs_wq_submit_bio is never called for synchronous I/O,
the hipri_workers workqueue is not used anymore and can be removed.
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The writeback_control structure already passes down the information about
a writeback being synchronous from the core VM code, and thus information
is propagated into the bio REQ_SYNC flag through the wbc_to_write_flags
helper.

Use that information to decide if checksums calculation is offloaded to
a workqueue instead of btrfs_inode::sync_writers field that not only
bloats the inode but also has too wide scope, being inode wide instead
of limited to the actual writeback request.

The sync writes were set in:

- btrfs_do_write_iter - regular IO, sync status is set
- start_ordered_ops - ordered write start, writeback with WB_SYNC_ALL
  mode
- btrfs_write_marked_extents - write marked extents, writeback with
  WB_SYNC_ALL mode
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>

Most modern hardware supports very fast accelerated crc32c calculation.
If that is supported the CPU overhead of the checksum calculation is
very limited, and offloading the calculation to special worker threads
has a lot of overhead for no gain.

E.g. on an Intel Optane device is actually very much slows down even
1M buffered writes with fio:

Unpatched:

write: IOPS=3316, BW=3316MiB/s (3477MB/s)(200GiB/61757msec); 0 zone resets

With synchronous CRCs:

write: IOPS=4882, BW=4882MiB/s (5119MB/s)(200GiB/41948msec); 0 zone resets

With a lot of variation during the unpatched run going down as low as
1100MB/s, while the synchronous CRC version has about the same peak write
speed but much lower dips, and fewer kworkers churning around.
Both tests had fio saturated at 100% CPU.

(thanks to Jens Axboe via Chris Mason for the benchmarking)
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Using SECTOR_SHIFT to convert LBA to physical address makes it more
readable.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Use SECTOR_SHIFT while converting a physical address to an LBA, makes
it more readable.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Improve the leaf dump behavior by:

- Always dump the leaf first, then the error message

- Output the slot number if possible
  Especially in __btrfs_free_extent() the leaf dump of extent tree can
  be pretty large.
  With an extra slot number it's much easier to locate the problem.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Since print-tree infrastructure only prints the content of a tree block,
we can make them to accept const extent buffer pointer.

This removes a forced type convert in extent-tree, where we convert a
const extent buffer pointer to regular one, just to avoid compiler
warning.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

bitmap_test_range_all_{set,zero} defined in subpage.c are useful for other
components. Move them to misc.h and use them in zoned.c. Also, as
find_next{,_zero}_bit take/return "unsigned long" instead of "unsigned
int", convert the type to "unsigned long".

While at it, also rewrite the "if (...) return true; else return false;"
pattern and add const to the input bitmap.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When checking siblings keys, before moving keys from one node/leaf to a
sibling node/leaf, it's very unexpected to have the last key of the left
sibling greater than or equals to the first key of the right sibling, as
that means we have a (serious) corruption that breaks the key ordering
properties of a b+tree. Since this is unexpected, surround the comparison
with the unlikely macro, which helps the compiler generate better code
for the most expected case (no existing b+tree corruption). This is also
what we do for other unexpected cases of invalid key ordering (like at
btrfs_set_item_key_safe()).
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The function btrfs_free_device() is never used outside of volumes.c, so
make it static and remove its prototype declaration at volumes.h.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Recently a Meta-internal workload encountered subvolume creation taking
up to 2s each, significantly slower than directory creation. As they
were hoping to be able to use subvolumes instead of directories, and
were looking to create hundreds, this was a significant issue. After
Josef investigated, it turned out to be due to the transaction commit
currently performed at the end of subvolume creation.

This change improves the workload by not doing transaction commit for every
subvolume creation, and merely requiring a transaction commit on fsync.
In the worst case, of doing a subvolume create and fsync in a loop, this
should require an equal amount of time to the current scheme; and in the
best case, the internal workload creating hundreds of subvolumes before
fsyncing is greatly improved.

While it would be nice to be able to use the log tree and use the normal
fsync path, log tree replay can't deal with new subvolume inodes
presently.

It's possible that there's some reason that the transaction commit is
necessary for correctness during subvolume creation; however,
git logs indicate that the commit dates back to the beginning of
subvolume creation, and there are no notes on why it would be necessary.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_prev_leaf() is not used outside ctree.c, so there's no need to
export it at ctree.h - just make it static at ctree.c and move its
definition above btrfs_search_slot_for_read(), since that function
calls it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pull SCSI fixes from James Bottomley:
 "Four fixes, all in drivers: three fairly obvious small ones and a
  large one in aacraid to add block queue completion mapping and fix a
  CPU offline hang"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Fix incorrect big endian type assignment in bsg loopback path
  scsi: target: core: Fix error path in target_setup_session()
  scsi: storvsc: Always set no_report_opcodes
  scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity

Pull ata fix from Damien Le Moal:

 - Avoid deadlocks on resume from sleep by delaying scsi rescan until
   the scsi device is also fully resumed.

* tag 'ata-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-scsi: Avoid deadlock on rescan after device resume

Pull parisc fix from Helge Deller:

 - Drop redundant register definitions to fix build with latest binutils

* tag 'parisc-for-6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Delete redundant register definitions in <asm/assembly.h>

The error unrolling was leaving the VMAs detached in many cases and
leaving the locked_vm statistic altered, and skipping the unrolling
entirely in the case of the vma tree write failing.

Fix the error path by re-attaching the detached VMAs and adding the
necessary goto for the failed vma tree write, and fix the locked_vm
statistic by only updating after the vma tree write succeeds.

Fixes: 763ecb03 ("mm: remove the vma linked list")
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When an ATA port is resumed from sleep, the port is reset and a power
management request issued to libata EH to reset the port and rescanning
the device(s) attached to the port. Device rescanning is done by
scheduling an ata_scsi_dev_rescan() work, which will execute
scsi_rescan_device().

However, scsi_rescan_device() takes the generic device lock, which is
also taken by dpm_resume() when the SCSI device is resumed as well. If
a device rescan execution starts before the completion of the SCSI
device resume, the rcu locking used to refresh the cached VPD pages of
the device, combined with the generic device locking from
scsi_rescan_device() and from dpm_resume() can cause a deadlock.

Avoid this situation by changing struct ata_port scsi_rescan_task to be
a delayed work instead of a simple work_struct. ata_scsi_dev_rescan() is
modified to check if the SCSI device associated with the ATA device that
must be rescanned is not suspended. If the SCSI device is still
suspended, ata_scsi_dev_rescan() returns early and reschedule itself for
execution after an arbitrary delay of 5ms.
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Joe Breuer <linux-kernel@jmbreuer.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217530
Fixes: a19a93e4 ("scsi: core: pm: Rely on the device driver core for async power management")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Joe Breuer <linux-kernel@jmbreuer.net>

Pull staging driver fix from Greg KH:
 "Here is a single staging driver "fix" for 6.4-rc7. I've been sitting
  on it in my tree for many weeks as it is just a simple documentation
  update, with the hope that maybe some other staging driver fixes would
  need to be merged for 6.4-final, but that does not seem to be the
  case.

  So please, pull in this one documentation update so that Aaro doesn't
  get emails going forward that he can't do anything about"

* tag 'staging-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: octeon: delete my name from TODO contact

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are some small USB and Thunderbolt driver fixes and new device
  ids for 6.4-rc7 to resolve some reported problems. Included in here
  are:

   - new USB serial device ids

   - USB gadget core fixes for long-dissussed problems

   - dwc3 bugfixes for reported issues.

   - typec driver fixes

   - thunderbolt driver fixes

  All of these have been in linux-next this week with no reported issues"

* tag 'usb-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: udc: core: Prevent soft_connect_store() race
  usb: gadget: udc: core: Offload usb_udc_vbus_handler processing
  usb: typec: Fix fast_role_swap_current show function
  usb: typec: ucsi: Fix command cancellation
  USB: dwc3: fix use-after-free on core driver unbind
  USB: dwc3: qcom: fix NULL-deref on suspend
  usb: dwc3: gadget: Reset num TRBs before giving back the request
  usb: gadget: udc: renesas_usb3: Fix RZ/V2M {modprobe,bind} error
  USB: serial: option: add Quectel EM061KGL series
  thunderbolt: Mask ring interrupt on Intel hardware as well
  thunderbolt: Do not touch CL state configuration during discovery
  thunderbolt: Increase DisplayPort Connection Manager handshake timeout
  thunderbolt: dma_test: Use correct value for absent rings when creating paths

Pull serial driver fixes from Greg KH:
 "Here are two small serial driver fixes for 6.4-rc7 that resolve some
  reported problems:

   - lantiq serial driver irq fix

   - fsl_lpuart serial driver watermark fix

  Both of these have been in linux-next this week with no reported issues"

* tag 'tty-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: fsl_lpuart: reduce RX watermark to 0 on LS1028A
  serial: lantiq: add missing interrupt ack

We define sp and ipsw in <asm/asmregs.h> using ".reg", and when using
current binutils (snapshot 2.40.50.20230611) the definitions in
<asm/assembly.h> using "=" conflict with those:

arch/parisc/include/asm/assembly.h: Assembler messages:
arch/parisc/include/asm/assembly.h:93: Error: symbol `sp' is already defined
arch/parisc/include/asm/assembly.h:95: Error: symbol `ipsw' is already defined

Delete the duplicate definitions in <asm/assembly.h>.

Also delete the definition of gp, which isn't used anywhere.
Signed-off-by: Ben Hutchings <benh@debian.org>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Helge Deller <deller@gmx.de>

Pull clk fixes from Stephen Boyd:
 "A handful of clk driver fixes:

   - Fix an OOB issue in the Mediatek mt8365 driver where arrays of clks
     are mismatched in size

   - Use the proper clk_ops for a few clks in the Mediatek mt8365 driver

   - Stop using abs() in clk_composite_determine_rate() because 64-bit
     math goes wrong on large unsigned long numbers that are subtracted
     and passed into abs()

   - Zero initialize a struct clk_init_data in clk-loongson2 to avoid
     stack junk confusing clk_hw_register()

   - Actually use a pointer to __iomem for writel() in
     pxa3xx_clk_update_accr() so we don't oops"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: pxa: fix NULL pointer dereference in pxa3xx_clk_update_accr
  clk: clk-loongson2: Zero init clk_init_data
  clk: mediatek: mt8365: Fix inverted topclk operations
  clk: composite: Fix handling of high clock rates
  clk: mediatek: mt8365: Fix index issue

Pull drm fixes from Dave Airlie:
 "A bunch of misc fixes across the board.

  amdgpu is the usual bulk with a revert and other fixes, nouveau has a
  race fix that was causing a UAF that was hard hanging systems,
  otherwise some qaic, bridge and radeon.

  amdgpu:
   - GFX9 preemption fixes
   - Add missing radeon secondary PCI ID
   - vblflash fixes
   - SMU 13 fix
   - VCN 4.0 fix
   - Re-enable TOPDOWN flag for large BAR systems to fix regression
   - eDP fix
   - PSR hang fix
   - DPIA fix

  radeon:
   - fbdev client warning fix

  qaic:
   - leak fix
   - null ptr deref fix

  nouveau:
   - use-after-free caused by fence race fix
   - runtime pm fix
   - NULL ptr checks

  bridge:
   - ti-sn65dsi86: Avoid possible buffer overflow"

* tag 'drm-fixes-2023-06-17' of git://anongit.freedesktop.org/drm/drm: (21 commits)
  nouveau: fix client work fence deletion race
  drm/amd/display: limit DPIA link rate to HBR3
  drm/amd/display: fix the system hang while disable PSR
  drm/amd/display: edp do not add non-edid timings
  Revert "drm/amdgpu: remove TOPDOWN flags when allocating VRAM in large bar system"
  drm/amdgpu: vcn_4_0 set instance 0 init sched score to 1
  drm/radeon: Disable outputs when releasing fbdev client
  drm/amd/pm: workaround for compute workload type on some skus
  drm/amd: Tighten permissions on VBIOS flashing attributes
  drm/amd: Make sure image is written to trigger VBIOS image update flow
  drm/amdgpu: add missing radeon secondary PCI ID
  drm/amdgpu: Implement gfx9 patch functions for resubmission
  drm/amdgpu: Modify indirect buffer packages for resubmission
  drm/amdgpu: Program gds backup address as zero if no gds allocated
  drm/nouveau: add nv_encoder pointer check for NULL
  drm/amdgpu: Reset CP_VMID_PREEMPT after trailing fence signaled
  drm/nouveau/dp: check for NULL nv_connector->native_mode
  drm/bridge: ti-sn65dsi86: Avoid possible buffer overflow
  drm/nouveau: don't detect DSM for non-NVIDIA device
  accel/qaic: Fix NULL pointer deref in qaic_destroy_drm_device()
  ...

In the same spirit as commit ca57f022 ("afs: Fix fileserver probe
RTT handling"), don't rule out using a vlserver just because there
haven't been enough packets yet to calculate a real rtt.  Always set the
server's probe rtt from the estimate provided by rxrpc_kernel_get_srtt,
which is capped at 1 second.

This could lead to EDESTADDRREQ errors when accessing a cell for the
first time, even though the vl servers are known and have responded to a
probe.

Fixes: 1d4adfaf ("rxrpc: Make rxrpc_kernel_get_srtt() indicate validity")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2023-June/006746.htmlSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm-misc-fixes maybe in time for v6.4-rc7:
- qaic leak and null deref fix.
- Fix runtime pm in nouveau.
- Fix array overflow in ti-sn65dsi86 pwm chip handling.
- Assorted null check fixes in nouveau.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patchwork.freedesktop.org/patch/msgid/641eb8a8-fbd7-90ad-0805-310b7fec9344@lankhorst.se

Pull btrfs fixes from David Sterba:
 "Two fixes for NOCOW files, a regression fix in scrub and an assertion
  fix:

   - NOCOW fixes:
      - keep length of iomap direct io request in case of a failure
      - properly pass mode of extent reference checking, this can break
        some cases for swapfile

   - fix error value confusion when scrubbing a stripe

   - convert assertion to a proper error handling when loading global
     roots, reported by syzbot"

* tag 'for-6.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: scrub: fix a return value overwrite in scrub_stripe()
  btrfs: do not ASSERT() on duplicated global roots
  btrfs: can_nocow_file_extent should pass down args->strict from callers
  btrfs: fix iomap_begin length for nocow writes

Pull block fix from Jens Axboe:
 "Just a single fix for blk-cg stats flushing"

* tag 'block-6.4-2023-06-15' of git://git.kernel.dk/linux:
  blk-cgroup: Flush stats before releasing blkcg_gq

Pull io_uring fixes from Jens Axboe:
 "A fix for sendmsg with CMSG, and the followup fix discussed for
  avoiding touching task->worker_private after the worker has started
  exiting"

* tag 'io_uring-6.4-2023-06-15' of git://git.kernel.dk/linux:
  io_uring/io-wq: clear current->worker_private on exit
  io_uring/net: save msghdr->msg_control for retries

Pull sound fixes from Takashi Iwai:
 "Just a few small fixes. The only change to the core code is for a
  minor race in ALSA OSS sequencer, and the rest are all device-specific
  fixes (regression fixes and a usual quirk)"

* tag 'sound-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Add quirk flag for HEM devices to enable native DSD playback
  ALSA: usb-audio: Fix broken resume due to UAC3 power state
  ALSA: seq: oss: Fix racy open/close of MIDI devices
  ASoC: tegra: Fix Master Volume Control
  ALSA: hda/realtek: Add a quirk for Compaq N14JP6
  firmware: cs_dsp: Log correct region name in bin error messages

Merge tag 'urgent-rcu.2023.06.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU fix from Paul McKenney:
 "This fixes a spinlock-initialization regression in SRCU that causes
  the SRCU notifier to fail.

  The fix simply adds the initialization, but introduces a #ifdef
  because there is no spinlock to initialize for the Tiny SRCU used in
  !SMP builds.

  Yes, it would be nice to abstract this somehow in order to hide it in
  SRCU, but I still don't see a good way of doing this"

* tag 'urgent-rcu.2023.06.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  notifier: Initialize new struct srcu_usage field

Pull RISC-V fix from Palmer Dabbelt:

 - A documentation patch describing how we use patchwork

* tag 'riscv-for-linus-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  Documentation: RISC-V: patch-acceptance: mention patchwork's role