- 01 Jan, 2023 13 commits
-
-
Michał Grzelak authored
As stated in marvell-orion-mdio.txt deleted in commit 0781434a ("dt-bindings: net: orion-mdio: Convert to JSON schema") if 'interrupts' property is present, width of 'reg' should be 0x84. Otherwise, width of 'reg' should be 0x4. Fix 'examples:' and add constraints checking whether 'interrupts' property is present and validate it against fixed values in reg. Signed-off-by:
Michał Grzelak <mig@semihalf.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Samuel Holland authored
This property has always been supported by the Linux driver; see commit 9f93ac8d ("net-next: stmmac: Add dwmac-sun8i"). In fact, the original driver submission includes the phy-supply code but no mention of it in the binding, so the omission appears to be accidental. In addition, the property is documented in the binding for the previous hardware generation, allwinner,sun7i-a20-gmac. Document phy-supply in the binding to fix devicetree validation for the 25+ boards that already use this property. Fixes: 0441bde0 ("dt-bindings: net-next: Add DT bindings documentation for Allwinner dwmac-sun8i") Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Samuel Holland <samuel@sholland.org> Signed-off-by:
-
Alex Elder authored
It is now possible for a system to have more than 32 endpoints. As a result, registers related to endpoint suspend are parameterized, with 32 endpoints represented in one more registers. In ipa_interrupt_suspend_control(), the IPA_SUSPEND_EN register offset is determined properly, but the bit mask used still assumes the number of enpoints won't exceed 32. This is a bug. Fix it. Fixes: f298ba78 ("net: ipa: add a parameter to suspend registers") Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
David S. Miller authored
Po-Hsu Lin says: ==================== selftests: net: fix for arp_ndisc_evict_nocarrier test This patchset will fix a false-positive issue caused by the command in cleanup_v6() of the arp_ndisc_evict_nocarrier test. Also, it will make the test to return a non-zero value for any failure reported in the test for us to avoid false-negative results. ==================== Signed-off-by: -
Po-Hsu Lin authored
Return non-zero return value if there is any failure reported in this script during the test. Otherwise it can only reflect the status of the last command. Fixes: f86ca07e ("selftests: net: add arp_ndisc_evict_nocarrier") Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by:
-
Po-Hsu Lin authored
The cleanup_v6() will cause the arp_ndisc_evict_nocarrier script exit with 255 (No such file or directory), even the tests are good: # selftests: net: arp_ndisc_evict_nocarrier.sh # run arp_evict_nocarrier=1 test # RTNETLINK answers: File exists # ok # run arp_evict_nocarrier=0 test # RTNETLINK answers: File exists # ok # run all.arp_evict_nocarrier=0 test # RTNETLINK answers: File exists # ok # run ndisc_evict_nocarrier=1 test # ok # run ndisc_evict_nocarrier=0 test # ok # run all.ndisc_evict_nocarrier=0 test # ok not ok 1 selftests: net: arp_ndisc_evict_nocarrier.sh # exit=255 This is because it's trying to modify the parameter for ipv4 instead. Also, tests for ipv6 (run_ndisc_evict_nocarrier_enabled() and run_ndisc_evict_nocarrier_disabled() are working on veth1, reflect this fact in cleanup_v6(). Fixes: f86ca07e ("selftests: net: add arp_ndisc_evict_nocarrier") Signed-off-by:
-
Sean Anderson authored
Now that phylink no longer calls phy_get_rate_matching with PHY_INTERFACE_MODE_NA, phys no longer need to support it. Remove the documentation mandating support. Fixes: 7642cc28 ("net: phylink: fix PHY validation with rate adaption") Signed-off-by:
Sean Anderson <sean.anderson@seco.com> Signed-off-by:
-
David S. Miller authored
Christian Marangi says: ==================== net: dsa: qca8k: multiple fix on mdio read/write Due to some problems in reading the Documentation and elaborating it some wrong assumption were done. The error was reported and notice only now due to how things are setup in the code flow. First 2 patch fix mgmt eth where the lenght calculation is very confusing and in step of word size. (the related commit description have an extensive description about how this mess works) Last 3 patch revert the broken mdio cache and apply a correct version that should still save some extra mdio in phy poll secnario. These 5 patch fix each related problem and apply what the Documentation actually say. Changes v2: - Add cover letter - Fix typo in revert patch ==================== Signed-off-by: -
Christian Marangi authored
Improve mdio master read/write by using singe mii read/write lo/hi. In a read and write we need to poll the mdio master regs in a busy loop to check for a specific bit present in the upper half of the reg. We can ignore the other half since it won't contain useful data. This will save an additional useless read for each read and write operation. In a read operation the returned data is present in the mdio master reg lower half. We can ignore the other half since it won't contain useful data. This will save an additional useless read for each read operation. In a read operation it's needed to just set the hi half of the mdio master reg as the lo half will be replaced by the result. This will save an additional useless write for each read operation. Tested-by:
Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
-
Christian Marangi authored
It may be useful to read/write just the lo or hi half of a reg. This is especially useful for phy poll with the use of mdio master. The mdio master reg is composed by the first 16 bit related to setup and the other half with the returned data or data to write. Refactor the mii function to permit single mii read/write of lo or hi half of the reg. Tested-by:
-
Christian Marangi authored
This reverts commit 2481d206. The Documentation is very confusing about the topic. The cache logic for hi and lo is wrong and actually miss some regs to be actually written. What the Documentation actually intended was that it's possible to skip writing hi OR lo if half of the reg is not needed to be written or read. Revert the change in favor of a better and correct implementation. Reported-by:
-
Christian Marangi authored
It was discovered that MGMT_DATA2 can contain up to 28 bytes of data instead of the 12 bytes written in the Documentation by accounting the limit of 16 bytes declared in Documentation subtracting the first 4 byte in the packet header. Update the define with the real world value. Tested-by:
-
Christian Marangi authored
The assumption that Documentation was right about how this value work was wrong. It was discovered that the length value of the mgmt header is in step of word size. As an example to process 4 byte of data the correct length to set is 2. To process 8 byte 4, 12 byte 6, 16 byte 8... Odd values will always return the next size on the ack packet. (length of 3 (6 byte) will always return 8 bytes of data) This means that a value of 15 (0xf) actually means reading/writing 32 bytes of data instead of 16 bytes. This behaviour is totally absent and not documented in the switch Documentation. In fact from Documentation the max value that mgmt eth can process is 16 byte of data while in reality it can process 32 bytes at once. To handle this we always round up the length after deviding it for word size. We check if the result is odd and we round another time to align to what the switch will provide in the ack packet. The workaround for the length limit of 15 is still needed as the length reg max value is 0xf(15) Reported-by:
-
- 30 Dec, 2022 18 commits
-
-
Miaoqian Lin authored
of_phy_find_device() return device node with refcount incremented. Call put_device() to relese it when not needed anymore. Fixes: ab4e6ee5 ("net: phy: xgmiitorgmii: Check phy_driver ready before accessing") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Signed-off-by:
-
David S. Miller authored
David Arinzon says: ==================== ENA driver bug fixes ==================== Signed-off-by: -
David Arinzon authored
The device supports a PCIe optimization hint, which indicates on which NUMA the queue is currently processed. This hint is utilized by PCIe in order to reduce its access time by accessing the correct NUMA resources and maintaining cache coherence. The driver calls the register update for the hint (called TPH - TLP Processing Hint) during the NAPI loop. Though the update is expected upon a NUMA change (when a queue is moved from one NUMA to the other), the current logic performs a register update when the queue is moved to a different CPU, but the CPU is not necessarily in a different NUMA. The changes include: 1. Performing the TPH update only when the queue has switched a NUMA node. 2. Moving the TPH update call to be triggered only when NAPI was scheduled from interrupt context, as opposed to a busy-polling loop. This is due to the fact that during busy-polling, the frequency of CPU switches for a particular queue is significantly higher, thus, the likelihood to switch NUMA is much higher. Therefore, providing the frequent updates to the device upon a NUMA update are unlikely to be beneficial. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
David Arinzon <darinzon@amazon.com> Signed-off-by:
-
David Arinzon authored
RX ring can be NULL in XDP use cases where only TX queues are configured. In this scenario, the RX interrupt moderation value sent to the device remains in its default value of 0. In this change, setting the default value of the RX interrupt moderation to be the same as of the TX. Fixes: 548c4940 ("net: ena: Implement XDP_TX action") Signed-off-by:
-
David Arinzon authored
Make the upper bound on rx_copybreak tighter, by making sure it is smaller than the minimum of mtu and ENA_PAGE_SIZE. With the current upper bound of mtu, rx_copybreak can be larger than a page. Such large rx_copybreak will not bring any performance benefit to the user and therefore makes no sense. In addition, the value update was only reflected in the adapter structure, but not applied for each ring, causing it to not take effect. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Osama Abboud <osamaabb@amazon.com> Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
-
David Arinzon authored
Redirecting packets with XDP Redirect is done in two phases: 1. A packet is passed by the driver to the kernel using xdp_do_redirect(). 2. After finishing polling for new packets the driver lets the kernel know that it can now process the redirected packet using xdp_do_flush_map(). The packets' redirection is handled in the napi context of the queue that called xdp_do_redirect() To avoid calling xdp_do_flush_map() each time the driver first checks whether any packets were redirected, using xdp_flags |= xdp_verdict; and if (xdp_flags & XDP_REDIRECT) xdp_do_flush_map() essentially treating XDP instructions as a bitmask, which isn't the case: enum xdp_action { XDP_ABORTED = 0, XDP_DROP, XDP_PASS, XDP_TX, XDP_REDIRECT, }; Given the current possible values of xdp_action, the current design doesn't have a bug (since XDP_REDIRECT = 100b), but it is still flawed. This patch makes the driver use a bitmask instead, to avoid future issues. Fixes: a318c70a ("net: ena: introduce XDP redirect implementation") Signed-off-by:Shay Agroskin <shayagr@amazon.com> Signed-off-by:
-
David Arinzon authored
The size of packets that were forwarded or dropped by XDP wasn't added to the total processed bytes statistic. Fixes: 548c4940 ("net: ena: Implement XDP_TX action") Signed-off-by:
-
David Arinzon authored
Since the queues aren't destroyed when we only exchange XDP programs, there's no need to re-register them again. Fixes: 548c4940 ("net: ena: Implement XDP_TX action") Signed-off-by:
-
David Arinzon authored
On driver initialization, RSS hash initial value is set to zero, instead of the default value. This happens because we pass NULL as the RSS key parameter, which caused us to never initialize the RSS hash value. This patch fixes it by making sure the initial value is set, no matter what the value of the RSS key is. Fixes: 91a65b7d ("net: ena: fix potential crash when rxfh key is NULL") Signed-off-by:
Nati Koler <nkoler@amazon.com> Signed-off-by:
-
Po-Hsu Lin authored
This cmsg_so_mark.sh test will hang on non-amd64 systems because of the infinity loop for argument parsing in cmsg_sender. Variable "o" in cs_parse_args() for taking getopt() should be an int, otherwise it will be 255 when getopt() returns -1 on non-amd64 system and thus causing infinity loop. Link: https://lore.kernel.org/lkml/CA+G9fYsM2k7mrF7W4V_TrZ-qDauWM394=8yEJ=-t1oUg8_40YA@mail.gmail.com/t/Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
mlx5-fixes-2022-12-28
-
Jiguang Xiao authored
The driver does not call tasklet_kill in several places. Add the calls to fix it. Fixes: 85b85c85 ("amd-xgbe: Re-issue interrupt if interrupt status not cleared") Signed-off-by:
Jiguang Xiao <jiguang.xiao@windriver.com> Signed-off-by:
-
Jian Shen authored
Currently, the PF check the VF alive by the KEEP_ALVE mailbox from VF. VF keep sending the mailbox per 2 seconds. Once PF lost the mailbox for more than 8 seconds, it will regards the VF is abnormal, and stop notifying the state change to VF, include link state, vf mac, reset, even though it receives the KEEP_ALIVE mailbox again. It's inreasonable. This patch fixes it. PF will record the state change which need to notify VF when lost the VF's KEEP_ALIVE mailbox. And notify VF when receive the mailbox again. Introduce a new flag HCLGE_VPORT_STATE_INITED, used to distinguish the case whether VF driver loaded or not. For VF will query these states when initializing, so it's unnecessary to notify it in this case. Fixes: aa5c4f17 ("net: hns3: add reset handling for VF when doing PF reset") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Hao Lan <lanhao@huawei.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Kuniyuki Iwashima says: =================== tcp: Fix bhash2 and TIME_WAIT regression. We forgot to add twsk to bhash2. Therefore TIME_WAIT sockets cannot prevent bind() to the same local address and port. Changes: v1: * Patch 1: * Add tw_bind2_node in inet_timewait_sock instead of moving sk_bind2_node from struct sock to struct sock_common. ==================== Signed-off-by: -
Kuniyuki Iwashima authored
bhash2 split the bind() validation logic into wildcard and non-wildcard cases. Let's add a test to catch future regression. Before the previous patch: # ./bind_timewait TAP version 13 1..2 # Starting 2 tests from 3 test cases. # RUN bind_timewait.localhost.1 ... # bind_timewait.c:87:1:Expected ret (0) == -1 (-1) # 1: Test terminated by assertion # FAIL bind_timewait.localhost.1 not ok 1 bind_timewait.localhost.1 # RUN bind_timewait.addrany.1 ... # OK bind_timewait.addrany.1 ok 2 bind_timewait.addrany.1 # FAILED: 1 / 2 tests passed. # Totals: pass:1 fail:1 xfail:0 xpass:0 skip:0 error:0 After: # ./bind_timewait TAP version 13 1..2 # Starting 2 tests from 3 test cases. # RUN bind_timewait.localhost.1 ... # OK bind_timewait.localhost.1 ok 1 bind_timewait.localhost.1 # RUN bind_timewait.addrany.1 ... # OK bind_timewait.addrany.1 ok 2 bind_timewait.addrany.1 # PASSED: 2 / 2 tests passed. # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by:
Joanne Koong <joannelkoong@gmail.com> Signed-off-by:
-
Kuniyuki Iwashima authored
Jiri Slaby reported regression of bind() with a simple repro. [0] The repro creates a TIME_WAIT socket and tries to bind() a new socket with the same local address and port. Before commit 28044fc1 ("net: Add a bhash2 table hashed by port and address"), the bind() failed with -EADDRINUSE, but now it succeeds. The cited commit should have put TIME_WAIT sockets into bhash2; otherwise, inet_bhash2_conflict() misses TIME_WAIT sockets when validating bind() requests if the address is not a wildcard one. The straight option is to move sk_bind2_node from struct sock to struct sock_common to add twsk to bhash2 as implemented as RFC. [1] However, the binary layout change in the struct sock could affect performances moving hot fields on different cachelines. To avoid that, we add another TIME_WAIT list in inet_bind2_bucket and check it while validating bind(). [0]: https://lore.kernel.org/netdev/6b971a4e-c7d8-411e-1f92-fda29b5b2fb9@kernel.org/ [1]: https://lore.kernel.org/netdev/20221221151258.25748-2-kuniyu@amazon.com/ Fixes: 28044fc1 ("net: Add a bhash2 table hashed by port and address") Reported-by:
Jiri Slaby <jirislaby@kernel.org> Suggested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
- 28 Dec, 2022 9 commits
-
-
Eli Cohen authored
Commit 0d4e8ed1 ("net/mlx5: Lag, avoid lockdep warnings") accidentally removed a call to cancel delayed bond work thus it may cause queued delay to expire and fall on an already destroyed work queue. Fix by restoring the call cancel_delayed_work_sync() before destroying the workqueue. This prevents call trace such as this: [ 329.230417] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 329.231444] #PF: supervisor write access in kernel mode [ 329.232233] #PF: error_code(0x0002) - not-present page [ 329.233007] PGD 0 P4D 0 [ 329.233476] Oops: 0002 [#1] SMP [ 329.234012] CPU: 5 PID: 145 Comm: kworker/u20:4 Tainted: G OE 6.0.0-rc5_mlnx #1 [ 329.235282] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 329.236868] Workqueue: mlx5_cmd_0000:08:00.1 cmd_work_handler [mlx5_core] [ 329.237886] RIP: 0010:_raw_spin_lock+0xc/0x20 [ 329.238585] Code: f0 0f b1 17 75 02 f3 c3 89 c6 e9 6f 3c 5f ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 02 f3 c3 89 c6 e9 45 3c 5f ff 0f 1f 44 00 00 0f 1f [ 329.241156] RSP: 0018:ffffc900001b0e98 EFLAGS: 00010046 [ 329.241940] RAX: 0000000000000000 RBX: ffffffff82374ae0 RCX: 0000000000000000 [ 329.242954] RDX: 0000000000000001 RSI: 0000000000000014 RDI: 0000000000000000 [ 329.243974] RBP: ffff888106ccf000 R08: ffff8881004000c8 R09: ffff888100400000 [ 329.244990] R10: 0000000000000000 R11: ffffffff826669f8 R12: 0000000000002000 [ 329.246009] R13: 0000000000000005 R14: ffff888100aa7ce0 R15: ffff88852ca80000 [ 329.247030] FS: 0000000000000000(0000) GS:ffff88852ca80000(0000) knlGS:0000000000000000 [ 329.248260] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 329.249111] CR2: 0000000000000000 CR3: 000000016d675001 CR4: 0000000000770ee0 [ 329.250133] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 329.251152] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 329.252176] PKRU: 55555554 Fixes: 0d4e8ed1 ("net/mlx5: Lag, avoid lockdep warnings") Signed-off-by:
Eli Cohen <elic@nvidia.com> Reviewed-by:
Maor Dickman <maord@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Maor Dickman authored
The cited patch added support of matching on geneve option by setting geneve_tlv_option_0_data mask and key but didn't set geneve_tlv_option_0_exist bit which is required on some HWs when matching geneve_tlv_option_0_data parameter, this may cause in some cases for packets to wrongly match on rules with different geneve option. Example of such case is packet with geneve_tlv_object class=789 and data=456 will wrongly match on rule with match geneve_tlv_object class=123 and data=456. Fix it by setting geneve_tlv_option_0_exist bit when supported by the HW when matching on geneve_tlv_option_0_data parameter. Fixes: 9272e3df ("net/mlx5e: Geneve, Add support for encap/decap flows offload") Signed-off-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
-
Adham Faris authored
Current xdp xmit functions logic (mlx5e_xmit_xdp_frame_mpwqe or mlx5e_xmit_xdp_frame), validates xdp packet length by comparing it to hw mtu (configured at xdp sq allocation) before xmiting it. This check does not account for ethernet fcs length (calculated and filled by the nic). Hence, when we try sending packets with length > (hw-mtu - ethernet-fcs-size), the device port drops it and tx_errors_phy is incremented. Desired behavior is to catch these packets and drop them by the driver. Fix this behavior in XDP SQ allocation function (mlx5e_alloc_xdpsq) by subtracting ethernet FCS header size (4 Bytes) from current hw mtu value, since ethernet FCS is calculated and written to ethernet frames by the nic. Fixes: d8bec2b2 ("net/mlx5e: Support bpf_xdp_adjust_head()") Signed-off-by:
Adham Faris <afaris@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Chris Mi authored
The cited commit introduced a bug for multiple encapsulations flow. If one dest encap becomes invalid, the flow is set slow path flag. But when other dests encap become invalid, they are not cleared due to slow path flag of the flow. When neigh-update-add is running, it will use invalid encap. Fix it by checking slow path flag after clearing dest encap. Fixes: 9a5f9cc7 ("net/mlx5e: Fix possible use-after-free deleting fdb rule") Signed-off-by:
Chris Mi <cmi@nvidia.com> Reviewed-by:
-
Chris Mi authored
Need to use sprintf to build a string instead of sscanf. Otherwise dirname is null and both "ct_nic" and "ct_fdb" won't be created. But its redundant anyway as driver could be in switchdev mode but still add nic rules. So use "ct" as folder name. Fixes: 77422a8f ("net/mlx5e: CT: Add ct driver counters") Signed-off-by:
-
Tariq Toukan authored
RX reporter mistakenly reads from the regular (inactive) RQ when XSK RQ is active. Fix it here. Fixes: 3db4c85c ("net/mlx5e: xsk: Use queue indices starting from 0 for XSK queues") Signed-off-by:
Gal Pressman <gal@nvidia.com> Signed-off-by:
-
Dragos Tatulea authored
mlx5e_build_nic_params will turn CQE compression on if the hardware capability is enabled and the slow_pci_heuristic condition is detected. As IPoIB doesn't support CQE compression, make sure to disable the feature in the IPoIB profile init. Please note that the feature is not exposed to the user for IPoIB interfaces, so it can't be subsequently turned on. Fixes: b797a684 ("net/mlx5e: Enable CQE compression when PCI is slower than link") Signed-off-by:
Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by:
-
Shay Drory authored
mlx5 PF can disable RoCE for its VFs and SFs. In such case RoCE is marked as unsupported on those VFs/SFs. The cited patch added an option for disable (and enable) RoCE at HCA level. However, that commit didn't check whether RoCE is supported on the HCA and enabled user to try and set RoCE to on. Fix it by checking whether the HCA supports RoCE. Fixes: fbfa97b4 ("net/mlx5: Disable roce at HCA level") Signed-off-by:
Shay Drory <shayd@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
-
Shay Drory authored
Currently, recovery is done without considering whether the device is still in probe flow. This may lead to recovery before device have finished probed successfully. e.g.: while mlx5_init_one() is running. Recovery flow is using functionality that is loaded only by mlx5_init_one(), and there is no point in running recovery without mlx5_init_one() finished successfully. Fix it by waiting for probe flow to finish and checking whether the device is probed before trying to perform recovery. Fixes: 51d138c2 ("net/mlx5: Fix health error state handling") Signed-off-by:
-
