- 21 Nov, 2019 9 commits
-
-
Oded Gabbay authored
To enable userspace processes, e.g. management utilities, to display the card name to the user, add the card name property to the HW_IP structure that is copied to the user in the INFO IOCTL. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/misc/habanalabs/goya/goya.c: In function 'goya_init_mme_cmdq': drivers/misc/habanalabs/goya/goya.c:1536:6: warning: variable 'qman_base_addr' set but not used [-Wunused-but-set-variable] It is never used, so can be removed. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
-
Oded Gabbay authored
Add a new opcode to the INFO IOCTL to allow the user application to retrieve the ASIC's current and maximum clock rate. The rate is returned in MHz. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Tomer Tayar <ttayar@habana.ai>
-
Oded Gabbay authored
Reduce latency to memory during TPC kernel execution. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Tomer Tayar <ttayar@habana.ai>
-
Tomer Tayar authored
This patch adds a support for a new H/W queue type. This type of queue is for DMA and compute engines jobs, for which completion notification are sent by H/W. Command buffer for this queue can be created either through the CB IOCTL and using the retrieved CB handle, or by preparing a buffer on the host or device SRAM/DRAM, and using the device address to that buffer. The patch includes the handling of the 2 options, as well as the initialization of the H/W queue and its jobs scheduling. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
-
Tomer Tayar authored
Jobs on some queues must be provided with a handle to a driver command buffer object, while for other queues, jobs must be provided with an address to a command buffer. Currently the distinction is done based on the queue type, which is less flexible if the same queue type behaves differently on different types of ASICs. This patch adds a new queue property for this target, which is configured per queue type per ASIC type. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
-
Tomer Tayar authored
s/paerser/parser/ s/requeusted/requested/ s/an JOB/a JOB/ Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/misc/habanalabs/device.c: In function hpriv_release: drivers/misc/habanalabs/device.c:45:17: warning: variable ctx set but not used [-Wunused-but-set-variable] It is never used since commit eb7caf84 ("habanalabs: maintain a list of file private data objects") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
-
Oded Gabbay authored
In case the F/W fails to initialize the thermal sensors, print an appropriate error message to kernel log and fail the device initialization. Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
-
- 20 Nov, 2019 5 commits
-
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191120134056.14677-1-krzk@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191120134247.16073-1-krzk@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
This adds support for the Trace Hub in Tiger Lake CPU. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191120130806.44028-4-alexander.shishkin@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
This adds support for the Trace Hub in Ice Lake CPU. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191120130806.44028-3-alexander.shishkin@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
Commit a753bfcf ("intel_th: Make the switch allocate its subdevices") factored out intel_th_subdevice_alloc() from intel_th_populate(), but got the error path wrong, resulting in two instances of a double put_device() on a freshly initialized, but not 'added' device. Fix this by only doing one put_device() in the error path. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: a753bfcf ("intel_th: Make the switch allocate its subdevices") Reported-by: Wen Yang <wenyang@linux.alibaba.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org # v4.14+ Link: https://lore.kernel.org/r/20191120130806.44028-2-alexander.shishkin@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 19 Nov, 2019 3 commits
-
-
Wei Yongjun authored
The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Tested-by: Yabin Cui <yabinc@google.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191118185207.30441-3-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wei Yongjun authored
The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Tested-by: Yabin Cui <yabinc@google.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191118185207.30441-2-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mika Westerberg authored
On zang's Dell XPS 13 9370 after Thunderbolt NVM firmware upgrade the Thunderbolt controller did not come back as expected. Only after the system was rebooted it became available again. It is not entirely clear what happened but I suspect the new NVM firmware image authentication failed for some reason. Regardless of this the router needs to be power cycled if NVM authentication fails in order to get it fully functional again. This modifies the driver to issue a power cycle in case the NVM authentication fails immediately when dma_port_flash_update_auth() returns. We also need to call tb_switch_set_uuid() earlier to be able to fetch possible NVM authentication failure when DMA port is added. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205457Reported-by: zang <dump@tzib.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 16 Nov, 2019 1 commit
-
-
Alexander Usyskin authored
Export more client attributes via sysfs that are usually obtained upon connection. In some cases, for example a monitoring application may wish to know the attributes without actually performing the connection. Added attributes: max number of connections, fixed address, max message length. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191116142136.17535-1-tomas.winkler@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 14 Nov, 2019 12 commits
-
-
Alexander Shishkin authored
Add documentation for the software sinks API of the MSU driver and the msu-sink module in particular. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20191114064201.43089-3-alexander.shishkin@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
Commit c7fd62bc ("stm class: Introduce framing protocol drivers") forgot to tear down the link between an stm device and its protocol driver when policy is removed. This leads to an invalid pointer reference if one tries to write to an stm device after the policy has been removed and the protocol driver module unloaded, leading to the below splat: > BUG: unable to handle page fault for address: ffffffffc0737068 > #PF: supervisor read access in kernel mode > #PF: error_code(0x0000) - not-present page > PGD 3d780f067 P4D 3d780f067 PUD 3d7811067 PMD 492781067 PTE 0 > Oops: 0000 [#1] SMP NOPTI > CPU: 1 PID: 26122 Comm: cat Not tainted 5.4.0-rc5+ #1 > RIP: 0010:stm_output_free+0x40/0xc0 [stm_core] > Call Trace: > stm_char_release+0x3e/0x70 [stm_core] > __fput+0xc6/0x260 > ____fput+0xe/0x10 > task_work_run+0x9d/0xc0 > exit_to_usermode_loop+0x103/0x110 > do_syscall_64+0x19d/0x1e0 > entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by tearing down the link from an stm device to its protocol driver when the policy involving that driver is removed. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: c7fd62bc ("stm class: Introduce framing protocol drivers") Reported-by: Ammy Yi <ammy.yi@intel.com> Tested-by: Ammy Yi <ammy.yi@intel.com> CC: stable@vger.kernel.org # v4.20+ Link: https://lore.kernel.org/r/20191114064201.43089-2-alexander.shishkin@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Richard Gong authored
The older versions of remote system update (RSU) firmware don't support retry and notify features then the kernel module dies when it queries the RSU retry counter or performs notify operation. Update the Intel service layer and RSU drivers to be compatible with all versions of RSU firmware. Reported-by: Radu Barcau <radu.bacrau@intel.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Richard Gong <richard.gong@intel.com> Link: https://lore.kernel.org/r/1572884676-1385-1-git-send-email-richard.gong@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rui Feng authored
Add support for new chip rts5261. In order to support rts5261, the definitions of some internal registers and workflow have to be modified and are different from its predecessors. So we need this patch to ensure RTS5261 can work. Signed-off-by: Rui Feng <rui_feng@realsil.com.cn> Link: https://lore.kernel.org/r/1571645105-5028-1-git-send-email-rui_feng@realsil.com.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Angelo Dureghello authored
add support for ds2430, 1 page, 256bit (32bytes) eeprom (family 0x14). Tests done: 32 bytes dump: x@y:~# hexdump -C -n 32 /sys/bus/w1/devices/14-00000158556e/eeprom 00000000 39 39 0a 00 00 36 0a ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 34 bytes dump: 32 only displayed x@y:~# hexdump -C -n 34 /sys/bus/w1/devices/14-00000158556e/eeprom 00000000 39 39 0a 00 00 36 0a ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 pattern write: x@y:~# echo 123456789 > /sys/bus/w1/devices/14-00000158556e/eeprom x@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom 00000000 31 32 33 34 35 36 37 38 39 0a ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 specific address 1-byte write x@y:~# dd if=/dev/zero of=/sys/bus/w1/devices/14-00000158556e/eeprom \ count=1 bs=1 seek=4 1+0 records in 1+0 records out x@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom 00000000 31 32 33 34 00 36 37 38 39 0a ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 writing binary block x@y:~# cat dump-128bytes.bin > /sys/bus/w1/devices/14-00000158556e/eeprom cat: write error: File too large x@y:~# cat dump-32bytes.bin > /sys/bus/w1/devices/14-00000158556e/eeprom x@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom 00000000 10 0b 5b ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 40 00000020 Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Link: https://lore.kernel.org/r/20191019204015.61474-1-angelo.dureghello@timesys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ben Dooks (Codethink) authored
Include cs_internal.h (and pcmcia/cistpl.h as required by cs_internal.h) for the declearions of cb_alloc and cb_free to silence the following sparse warnings; drivers/pcmcia/cardbus.c:64:11: warning: symbol 'cb_alloc' was not declared. Should it be static? drivers/pcmcia/cardbus.c:103:6: warning: symbol 'cb_free' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20191017114059.10989-1-ben.dooks@codethink.co.ukSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ben Dooks (Codethink) authored
Include <pcmcia/ds.h> for pcmcia_parse_tuple declaration to fix the following sparse warning: drivers/pcmcia/cistpl.c:1287:5: warning: symbol 'pcmcia_parse_tuple' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20191017114447.20455-1-ben.dooks@codethink.co.ukSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dhanuka Warusadura authored
This patch fixes - warning: Function parameter or member 'of_match_table' not described in 'w1_family' Signed-off-by: Dhanuka Warusadura <csx@disroot.org> Link: https://lore.kernel.org/r/20191028110744.6523-1-csx@disroot.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexandru Ardelean authored
This change also does a bit of a unification for the IRQ init code. But the actual problem is that UIO_IRQ_NONE == 0, so for the DT case where UIO_IRQ_NONE gets assigned to `uioinfo->irq`, a 2nd initialization will get triggered (for the IRQ) and this one will exit via `goto bad1`. As far as things seem to go, the only case where UIO_IRQ_NONE seems valid, is when using a device-tree. The driver has some legacy support for old platform_data structures. It looks like, for platform_data a non-existent IRQ is an invalid case (or was considered an invalid case). Which is why -ENXIO is treated only when a DT is used. Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Acked-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Link: https://lore.kernel.org/r/20191105073212.16719-1-alexandru.ardelean@analog.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jann Horn authored
The old loop wouldn't stop when reaching `start` if `start==NULL`, instead continuing backwards to index -1 and crashing. Luckily you need to be highly privileged to map things at NULL, so it's not a big problem. Fix it by adjusting the loop so that the loop variable is always in bounds. This patch is deliberately minimal to simplify backporting, but IMO this function could use a refactor. The jump labels in the second loop body are horrible (the error gotos should be jumping to free_range instead), and both loops would look nicer if they just iterated upwards through indices. And the up_read()+mmput() shouldn't be duplicated like that. Cc: stable@vger.kernel.org Fixes: 457b9a6f ("Staging: android: add binder driver") Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20191018205631.248274-3-jannh@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jann Horn authored
binder_alloc_mmap_handler() attempts to detect the use of ->mmap() on a binder_proc whose binder_alloc has already been initialized by checking whether alloc->buffer is non-zero. Before commit 88021166 ("binder: remove kernel vm_area for buffer space"), alloc->buffer was a kernel mapping address, which is always non-zero, but since that commit, it is a userspace mapping address. A sufficiently privileged user can map /dev/binder at NULL, tricking binder_alloc_mmap_handler() into assuming that the binder_proc has not been mapped yet. This leads to memory unsafety. Luckily, no context on Android has such privileges, and on a typical Linux desktop system, you need to be root to do that. Fix it by using the mapping size instead of the mapping address to distinguish the mapped case. A valid VMA can't have size zero. Fixes: 88021166 ("binder: remove kernel vm_area for buffer space") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20191018205631.248274-2-jannh@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jann Horn authored
binder_alloc_print_pages() iterates over alloc->pages[0..alloc->buffer_size-1] under alloc->mutex. binder_alloc_mmap_handler() writes alloc->pages and alloc->buffer_size without holding that lock, and even writes them before the last bailout point. Unfortunately we can't take the alloc->mutex in the ->mmap() handler because mmap_sem can be taken while alloc->mutex is held. So instead, we have to locklessly check whether the binder_alloc has been fully initialized with binder_alloc_get_vma(), like in binder_alloc_new_buf_locked(). Fixes: 8ef4665a ("android: binder: Add page usage in binder stats") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20191018205631.248274-1-jannh@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 13 Nov, 2019 6 commits
-
-
Sudip Mukherjee authored
Modify parport daisy driver to use the new parallel port device model. Last attempt was '1aec4211 ("parport: daisy: use new parport device model")' which failed as daisy was also trying to load the low level driver and that resulted in a deadlock. Cc: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20191016144540.18810-4-sudipm.mukherjee@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sudip Mukherjee authored
Usually all the distro will load the parport low level driver as part of their initialization. But we can get into a situation where all the parallel port drivers are built as module and we unload all the modules at a later time. Then if we just do "modprobe parport" it will only load the parport module and will not load the low level driver which will actually register the ports. So, check the bus if there is any parport registered, if not, load the low level driver. We can get into the above situation with all distro but only Suse has setup the alias for "parport_lowlevel" and so it only works in Suse. Users of Debian based distro will need to load the lowlevel module manually. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20191016144540.18810-3-sudipm.mukherjee@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sudip Mukherjee authored
We do not need to maintain a list of ports when we are using the device-model. The base layer is going to maintain the list for us and we can get the list of ports just using bus_for_each_dev(). Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20191016144540.18810-2-sudipm.mukherjee@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sudip Mukherjee authored
The daisy device name is hardcoded, define it in the header file and use it in the code. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20191016144540.18810-1-sudipm.mukherjee@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
The layout of struct timeval is different on sparc64 from anything else, and the patch I did long ago failed to take this into account. Change it now to handle sparc64 user space correctly again. Quite likely nobody cares about parallel ports on sparc64, but there is no reason not to fix it. Cc: stable@vger.kernel.org Fixes: 9a450484 ("lp: support 64-bit time_t user space") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20191108203435.112759-7-arnd@arndb.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
Going through the uses of timeval in the user space API, I noticed two bugs in ppdev that were introduced in the y2038 conversion: * The range check was accidentally moved from ppsettime to ppgettime * On sparc64, the microseconds are in the other half of the 64-bit word. Fix both, and mark the fix for stable backports. Cc: stable@vger.kernel.org Fixes: 3b9ab374 ("ppdev: convert to y2038 safe") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20191108203435.112759-8-arnd@arndb.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 11 Nov, 2019 2 commits
-
-
Greg Kroah-Hartman authored
We need the char/misc driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
-
- 10 Nov, 2019 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A set of fixes that have trickled in over the last couple of weeks: - MAINTAINER update for Cavium/Marvell ThunderX2 - stm32 tweaks to pinmux for Joystick/Camera, and RAM allocation for CAN interfaces - i.MX fixes for voltage regulator GPIO mappings, fixes voltage scaling issues - More i.MX fixes for various issues on i.MX eval boards: interrupt storm due to u-boot leaving pins in new states, fixing power button config, a couple of compatible-string corrections. - Powerdown and Suspend/Resume fixes for Allwinner A83-based tablets - A few documentation tweaks and a fix of a memory leak in the reset subsystem" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: update Cavium ThunderX2 maintainers ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1 ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1 ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157 arm64: dts: zii-ultra: fix ARM regulator GPIO handle ARM: sunxi: Fix CPU powerdown on A83T ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend arm64: dts: imx8mn: fix compatible string for sdma arm64: dts: imx8mm: fix compatible string for sdma reset: fix reset_control_ops kerneldoc comment ARM: dts: imx6-logicpd: Re-enable SNVS power key soc: imx: gpc: fix initialiser format ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts arm64: dts: ls1028a: fix a compatible issue reset: fix reset_control_get_exclusive kerneldoc comment reset: fix reset_control_lookup kerneldoc comment reset: fix of_reset_control_get_count kerneldoc comment reset: fix of_reset_simple_xlate kerneldoc comment reset: Fix memory leak in reset_control_array_put()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull IIO fixes and staging driver from Greg KH: "Here is a mix of a number of IIO driver fixes for 5.4-rc7, and a whole new staging driver. The IIO fixes resolve some reported issues, all are tiny. The staging driver addition is the vboxsf filesystem, which is the VirtualBox guest shared folder code. Hans has been trying to get filesystem reviewers to review the code for many months now, and Christoph finally said to just merge it in staging now as it is stand-alone and the filesystem people can review it easier over time that way. I know it's late for this big of an addition, but it is stand-alone. The code has been in linux-next for a while, long enough to pick up a few tiny fixes for it already so people are looking at it. All of these have been in linux-next with no reported issues" * tag 'staging-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: Fix error return code in vboxsf_fill_super() staging: vboxsf: fix dereference of pointer dentry before it is null checked staging: vboxsf: Remove unused including <linux/version.h> staging: Add VirtualBox guest shared folder (vboxsf) support iio: adc: stm32-adc: fix stopping dma iio: imu: inv_mpu6050: fix no data on MPU6050 iio: srf04: fix wrong limitation in distance measuring iio: imu: adis16480: make sure provided frequency is positive
-