Add validating the UDP tunnel infra works.

$ ./udp_tunnel_nic.sh
PASSED all 383 checks
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add UDP tunnel port handlers to our fake driver so we can test
the core infra.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add an interface to report offloaded UDP ports via ethtool netlink.

Now that core takes care of tracking which UDP tunnel ports the NICs
are aware of we can quite easily export this information out to
user space.

The responsibility of writing the netlink dumps is split between
ethtool code and udp_tunnel_nic.c - since udp_tunnel module may
not always be loaded, yet we should always report the capabilities
of the NIC.

$ ethtool --show-tunnels eth0
Tunnel information for eth0:
  UDP port table 0:
    Size: 4
    Types: vxlan
    No entries
  UDP port table 1:
    Size: 4
    Types: geneve, vxlan-gpe
    Entries (1):
        port 1230, vxlan-gpe

v4:
 - back to v2, build fix is now directly in udp_tunnel.h
v3:
 - don't compile ETHTOOL_MSG_TUNNEL_INFO_GET in if CONFIG_INET
   not set.
v2:
 - fix string set count,
 - reorder enums in the uAPI,
 - fix type of ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES to bitset
   in docs and comments.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cater to devices which:
 (a) may want to sleep in the callbacks;
 (b) only have IPv4 support;
 (c) need all the programming to happen while the netdev is up.

Drivers attach UDP tunnel offload info struct to their netdevs,
where they declare how many UDP ports of various tunnel types
they support. Core takes care of tracking which ports to offload.

Use a fixed-size array since this matches what almost all drivers
do, and avoids a complexity and uncertainty around memory allocations
in an atomic context.

Make sure that tunnel drivers don't try to replay the ports when
new NIC netdev is registered. Automatic replays would mess up
reference counting, and will be removed completely once all drivers
are converted.

v4:
 - use a #define NULL to avoid build issues with CONFIG_INET=n.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make it possible to use tunnel types as flags more easily.
There doesn't appear to be any user using the type as an
array index, so this should make no difference.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

debugfs_create_u32_array() allocates a small structure to wrap
the data and size information about the array. If users ever
try to remove the file this leads to a leak since nothing ever
frees this wrapper.

That said there are no upstream users of debugfs_create_u32_array()
that'd remove a u32 array file (we only have one u32 array user in
CMA), so there is no real bug here.

Make callers pass a wrapper they allocated. This way the lifetime
management of the wrapper is on the caller, and we can avoid the
potential leak in debugfs.

CC: Chucheng Luo <luochucheng@vivo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
Expose port split attributes

Danielle says:

Currently, user space has no way of knowing if a port can be split and
into how many ports. Among other things, this makes it impossible to
write generic tests for port split functionality.

Therefore, this set exposes two new devlink port attributes to user
space: Number of lanes and whether the port can be split or not.

Patch set overview:

Patches #1-#4 cleanup 'struct devlink_port_attrs' and reduce the number
of parameters passed between drivers and devlink via
devlink_port_attrs_set()

Patch #5 adds devlink port lanes attributes

Patches #6-#7 add devlink port splittable attribute

Patch #8 exploits the fact that devlink is now aware of port's number of
lanes and whether the port can be split or not and moves some checks
from drivers to devlink

Patch #9 adds a port split test

Changes since v2:
* Remove some local variables from patch #3
* Reword function description in patch #5
* Fix a bug in patch #8
* Add a test for the splittable attribute in patch #9

Changes since v1:
* Rename 'width' attribute to 'lanes'
* Add 'splittable' attribute
* Move checks from drivers to devlink
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Test port split configuration using previously added number of port lanes
attribute.

Check that all the splittable ports are successfully split to their maximum
number of lanes and below, and that those which are not splittable fail to
be split.

Test output example:

TEST: swp4 is unsplittable                                         [ OK ]
TEST: split port swp53 into 4                                      [ OK ]
TEST: Unsplit port pci/0000:03:00.0/25                             [ OK ]
TEST: split port swp53 into 2                                      [ OK ]
TEST: Unsplit port pci/0000:03:00.0/25                             [ OK ]
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, all the input checks are done in driver.

After adding the split capability to devlink port, move the checks to
devlink.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new attribute that indicates the split ability of devlink port.

Drivers are expected to set it via devlink_port_attrs_set(), before
registering the port.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, port attributes like flavour, port number and whether the port
was split are set when initializing a port.

Set the split ability of the port as well, based on port_mapping->width
field and split attribute of devlink port in spectrum, so that it could be
easily passed to devlink in the next patch.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new devlink port attribute that indicates the port's number of lanes.

Drivers are expected to set it via devlink_port_attrs_set(), before
registering the port.

The attribute is not passed to user space in case the number of lanes is
invalid (0).
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, port attributes like flavour, port number and whether the
port was split are set when initializing a port.

Set the number of lanes of the port as well so that it could be easily
passed to devlink in the next patch.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, devlink_port_attrs_set accepts a long list of parameters,
that most of them are devlink port's attributes.

Use the devlink_port_attrs struct to replace the relevant parameters.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The struct devlink_port_attrs holds the attributes of devlink_port.

Similarly to the previous patch, 'switch_port' attribute is another
exception.

Move 'switch_port' to be devlink_port's field.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The struct devlink_port_attrs holds the attributes of devlink_port.

The 'set' field is not devlink_port's attribute as opposed to most of the
others.

Move 'set' to be devlink_port's field called 'attrs_set'.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/mscc/mscc_ptp.c:1496:1-3: WARNING: PTR_ERR_OR_ZERO can be used

 Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

Fixes: 7d272e63 ("net: phy: mscc: timestamping and PHC support")
CC: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the u16 skb->vlan_tci is being right  shifted twice by
VLAN_PRIO_SHIFT, once in the macro skb_vlan_tag_get_pri and explicitly
by VLAN_PRIO_SHIFT afterwards. The combined shift amount is larger than
the u16 so the end result is always zero.  Remove the second explicit
shift as this is extraneous.

Fixes: 6e9fdb60 ("net: systemport: Add support for VLAN transmit acceleration")
Addresses-Coverity: ("Operands don't affect result")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
mptcp: introduce msk diag interface

This series implements the diag interface for the MPTCP sockets.

Since the MPTCP protocol value can't be represented with the
current diag uAPI, the first patch introduces an extended attribute
allowing user-space to specify lager protocol values.

The token APIs are then extended to allow traversing the
whole token container.

Patch 3 carries the actual diag interface implementation, and
later patch bring-in some functional self-tests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

basic functional test, triggering the msk diag interface
code. Require appropriate iproute2 support, skip elsewhere.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

exposes basic inet socket attribute, plus some MPTCP socket
fields comprising PM status and MPTCP-level sequence numbers.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp_token_iter_next() allow traversing all the MPTCP
sockets inside the token container belonging to the given
network namespace with a quite standard iterator semantic.

That will be used by the next patch, but keep the API generic,
as we plan to use this later for PM's sake.

Additionally export mptcp_token_get_sock(), as it also
will be used by the diag module.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit bf976514 ("sock: Make sk_protocol a 16-bit value")
the current size of 'sdiag_protocol' is not sufficient to represent
the possible protocol values.

This change introduces a new inet diag request attribute to let
user space specify the relevant protocol number using u32 values.

The attribute is parsed by inet diag core on get/dump command
and the extended protocol value, if available, is preferred to
'sdiag_protocol' to lookup the diag handler.

The parse attributed are exposed to all the diag handlers via
the cb->data.

Note that inet_diag_dump_one_icsk() is left unmodified, as it
will not be used by protocol using the extended attribute.
Suggested-by: David S. Miller <davem@davemloft.net>
Co-developed-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to use eth_broadcast_addr() to assign broadcast address
insetad of memset().
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bond_ipsec_* helpers don't need RTNL, and can potentially get called
without it being held, so switch from rtnl_dereference() to
rcu_dereference() to access bond struct data.

Lightly tested with xfrm bonding, no problems found, should address the
syzkaller bug referenced below.

Reported-by: syzbot+582c98032903dcc04816@syzkaller.appspotmail.com
CC: Huy Nguyen <huyn@mellanox.com>
CC: Saeed Mahameed <saeedm@mellanox.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

DP83869 is an Ethernet PHY, not a charger, so fix the documentation
accordingly.

Fixes: 4d66c56f ("dt-bindings: net: dp83869: Add TI dp83869 phy")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

DP83867 is an Ethernet PHY, not a charger, so fix the documentation
accordingly.

Fixes: 74ac28f1 ("dt-bindings: dp83867: Convert DP83867 to yaml")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's possible that device removal happens when the bond is in non-AB mode,
and addition happens in AB mode, so bond_ipsec_del_sa() never gets called,
which leaves security associations in an odd state if bond_ipsec_add_sa()
then gets called after switching the bond into AB. Just call add and
delete universally for all modes to keep things consistent.

However, it's also possible that this code gets called when the system is
shutting down, and the xfrm subsystem has already been disconnected from
the bond device, so we need to do some error-checking and bail, lest we
hit a null ptr deref.

Fixes: a3b658cf ("bonding: allow xfrm offload setup post-module-load")
CC: Huy Nguyen <huyn@mellanox.com>
CC: Saeed Mahameed <saeedm@mellanox.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Linus Walleij says:

====================
RTL8366RB tagging support

This patch set adds DSA tagging support to the RTL8366RB
DSA driver.

There is a minor performance improvement in the tag parser
compared to the previous patch set and the review tags
have been collected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This activates the support to use the CPU tag to properly
direct ingress traffic to the right port.

Bit 15 in register RTL8368RB_CPU_CTRL_REG can be set to
1 to disable the insertion of the CPU tag which is what
the code currently does. The bit 15 define calls this
setting RTL8368RB_CPU_INSTAG which is confusing since the
inverse meaning is implied: programmers may think that
setting this bit to 1 will *enable* inserting the tag
rather than disabling it, so rename this setting in
bit 15 to RTL8368RB_CPU_NO_TAG which is more to the
point.

After this e.g. ping works out-of-the-box with the
RTL8366RB.

Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This implements the known parts of the Realtek 4 byte
tag protocol version 0xA, as found in the RTL8366RB
DSA switch.

It is designated as protocol version 0xA as a
different Realtek 4 byte tag format with protocol
version 0x9 is known to exist in the Realtek RTL8306
chips.

The tag and switch chip lacks public documentation, so
the tag format has been reverse-engineered from
packet dumps. As only ingress traffic has been available
for analysis an egress tag has not been possible to
develop (even using educated guesses about bit fields)
so this is as far as it gets. It is not known if the
switch even supports egress tagging.

Excessive attempts to figure out the egress tag format
was made. When nothing else worked, I just tried all bit
combinations with 0xannp where a is protocol and p is
port. I looped through all values several times trying
to get a response from ping, without any positive
result.

Using just these ingress tags however, the switch
functionality is vastly improved and the packets find
their way into the destination port without any
tricky VLAN configuration. On the D-Link DIR-685 the
LAN ports now come up and respond to ping without
any command line configuration so this is a real
improvement for users.

Egress packets need to be restricted to the proper
target ports using VLAN, which the RTL8366RB DSA
switch driver already sets up.

Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch exposes new link modes using 100Gbps per lane, including 100G,
200G and 400G modes.
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Define 100G, 200G and 400G link modes using 100Gbps per lane

LR, ER and FR are defined as a single link mode because they are
using same technology and by design are fully interoperable.
EEPROM content indicates if the module is LR, ER, or FR, and the
user space ethtool decoder is planned to support decoding these
modes in the EEPROM.
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
CC: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Driver update for net-next.

This patchset implements ethtool -X to setup user-defined RSS indirection
table.  The new infrastructure also allows the proper logical ring index
to be used to populate the RSS indirection when queried by ethtool -x.
Prior to these patches, we were incorrectly populating the output of
ethtool -x with internal ring IDs which would make no sense to the user.

The last 2 patches add some cleanups to the VLAN acceleration logic
and check the firmware capabilities before allowing VLAN acceleration
offloads.

v4: Move bnxt_get_rxfh_indir_size() fix to a new patch #2.
    Modify patch #7 to revert RSS map to default only when necessary.

v3: Use ALIGN() in patch 5.
    Add warning messages in patch 6.

v2: Some RSS indirection table changes requested by Jakub Kicinski.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bare-metal use cases require giving firmware and the embedded
application processor control over VLAN offloads. The driver should
not attempt to override or utilize this feature in such scenarios
since it will not work as expected.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The hardware VLAN offload feature on our NIC does not have separate
knobs for handling customer and service tags on RX. Either offloading
of both must be enabled or both must be disabled. Introduce definitions
for the combined feature set in order to clean up the code and make
this constraint more clear. Technically these features can be separately
enabled on TX, however, since the default is to turn both on, the
combined TX feature set is also introduced for code consistency.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With the new infrastructure in place, we can now support the setting of
the indirection table from ethtool.

When changing channels, in a rare case that firmware cannot reserve the
rings that were promised, we will still try to keep the RSS map and only
revert to default when absolutely necessary.

v4: Revert RSS map to default during ring change only when absolutely
    necessary.

v3: Add warning messages when firmware cannot reserve the requested RX
    rings, and when the RSS table entries have to change to default.

v2: When changing channels, if the RSS table size changes and RSS map
    is non-default, return error.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we have the logical indirection table, we can return these
proper logical indices directly to ethtool -x instead of the physical
IDs.
Reported-by: Jakub Kicinski <kicinski@fb.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we have the logical table, we can fill the HW RSS table
using the logical table's entries and converting them to the HW
specific format.  Re-initialize the logical table to standard
distribution if the number of RX rings changes during ring reservation.

v4: Use bnxt_get_rxfh_indir_size() to get the RSS table size.

v2: Use ALIGN() to roundup the RSS table size.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On some chips, this varies based on the number of RX rings.  Add this
helper function and refactor the existing code to use it.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>