- 20 Feb, 2009 2 commits
-
-
Frederic Weisbecker authored
Sometimes it happens that KConfig dependencies are not handled like in the following scenario: - config A bool - config B bool depends on A - config C bool select B If one selects C, then it will select B without checking its dependency to A, if A hasn't been selected elsewhere, it will result in a build failure. This is what happens on the following build error: kernel/built-in.o: In function `marker_update_probe_range': (.text+0x52f64): undefined reference to `tracepoint_probe_register_noupdate' kernel/built-in.o: In function `marker_update_probe_range': (.text+0x52f74): undefined reference to `tracepoint_probe_unregister_noupdate' kernel/built-in.o: In function `marker_update_probe_range': (.text+0x52fb9): undefined reference to `tracepoint_probe_unregister_noupdate' kernel/built-in.o: In function `marker_update_probes': marker.c:(.text+0x530ba): undefined reference to `tracepoint_probe_update_all' CONFIG_KVM_TRACE will select CONFIG_MARKER, but the latter depends on CONFIG_TRACEPOINTS which will not be selected. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
-
- 19 Feb, 2009 30 commits
-
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5405/1: ep93xx: remove unused gesbc9312.h header [ARM] 5404/1: Fix condition in arm_elf_read_implies_exec() to set READ_IMPLIES_EXEC [ARM] omap: fix clock reparenting in omap2_clk_set_parent() [ARM] 5403/1: pxa25x_ep_fifo_flush() *ep->reg_udccs always set to 0 [ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo() [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support [ARM] 5400/1: Add support for inverted rdy_busy pin for Atmel nand device controller [ARM] 5391/1: AT91: Enable GPIO clocks earlier [ARM] 5390/1: AT91: Watchdog fixes [ARM] 5398/1: Add Wan ZongShun to MAINTAINERS for W90P910 [ARM] omap: fix _omap2_clksel_get_src_field() [ARM] omap: fix omap2_divisor_to_clksel() error return value
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mce: fix ifdef for 64bit thermal apic vector clear on shutdown x86, mce: use force_sig_info to kill process in machine check x86, mce: reinitialize per cpu features on resume x86, rcu: fix strange load average and ksoftirqd behavior
-
Linus Torvalds authored
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: limit the number of loops the ring buffer self test can make tracing: have function trace select kallsyms tracing: disable tracing while testing ring buffer tracing/function-graph-tracer: trace the idle tasks
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] fix "mem=" handling in case of standby memory [S390] Fix timeval regression on s390 [S390] sclp: handle empty event buffers
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: virtuoso: revert "do not overwrite EEPROM on Xonar D2/D2X" ALSA: jack - Use card->shortname for input name ALSA: usb-audio - Workaround for misdetected sample rate with CM6207 ALSA: usb-audio - Fix non-continuous rate detection sound: usb-audio: fix uninitialized variable with M-Audio MIDI interfaces Revert "Sound: hda - Restore PCI configuration space with interrupts off"
-
Hartley Sweeten authored
Remove the gesbc9312.h header since it is unused. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Makito SHIOKAWA authored
READ_IMPLIES_EXEC must be set when: o binary _is_ an executable stack (i.e. not EXSTACK_DISABLE_X) o processor architecture is _under_ ARMv6 (XN bit is supported from ARMv6) Signed-off-by: Makito SHIOKAWA <lkhmkt@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Heiko Carstens authored
Standby memory detected with the sclp interface gets always registered with add_memory calls without considering the limitationt that the "mem=" kernel paramater implies. So fix this and only register standby memory that is below the specified limit. This fixes zfcpdump since it uses "mem=32M". In case there is appr. 2GB standby memory present all of usable memory would be used for the struct pages needed for standby memory. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Christian Borntraeger authored
commit aa5e97ce [PATCH] improve precision of process accounting. Introduced a timing regression: -bash-3.2# time ls real 0m0.006s user 0m1.754s sys 0m1.094s The problem was introduced by an error in cputime_to_timeval. Cputime is now 1/4096 microsecond, therefore, we have to divide the remainder with 4096 to get the microseconds. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Peter Oberparleiter authored
Handle a malformed hardware response which some versions of the Support Element (SE) may present during SE restart and which otherwise would result in an endless loop in function sclp_dispatch_evbufs. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Russell King authored
When changing the parent of a clock, it is necessary to keep the clock use counts balanced otherwise things the parent state will get corrupted. Since we already disable and re-enable the clock, we might as well use the recursive versions instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Takashi Iwai authored
-
Takashi Iwai authored
-
Takashi Iwai authored
-
Ingo Molnar authored
Merge artifact: pid got changed to ent->pid meanwhile. Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
- fix typos/grammos and clarify the text - prettify the document some more Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Frederic Weisbecker authored
Update documentation for the function graph tracer. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Frederic Weisbecker authored
Impact: trace output cleanup/reordering When an interrupt occurs and and the abstime option is selected: echo funcgraph-abstime > /debug/tracing/trace_options then we observe broken traces: 30581.025422 | 0) Xorg-4291 | 0.503 us | idle_cpu(); 30581.025424 | 0) Xorg-4291 | 2.576 us | } 30581.025424 | 0) Xorg-4291 | + 75.771 us | } 0) Xorg-4291 | <========== | 30581.025425 | 0) Xorg-4291 | | schedule() { 30581.025426 | 0) Xorg-4291 | | __schedule() { 30581.025426 | 0) Xorg-4291 | 0.705 us | _spin_lock_irq(); With this patch, the interrupts output better adapts to absolute time printing: 414.856543 | 1) Xorg-4279 | 8.816 us | } 414.856544 | 1) Xorg-4279 | 0.525 us | rcu_irq_exit(); 414.856545 | 1) Xorg-4279 | 0.526 us | idle_cpu(); 414.856546 | 1) Xorg-4279 | + 12.157 us | } 414.856549 | 1) Xorg-4279 | ! 104.114 us | } 414.856549 | 1) Xorg-4279 | <========== | 414.856549 | 1) Xorg-4279 | ! 107.944 us | } 414.856550 | 1) Xorg-4279 | ! 137.010 us | } 414.856551 | 1) Xorg-4279 | 0.624 us | _read_unlock(); 414.856552 | 1) Xorg-4279 | ! 140.930 us | } 414.856552 | 1) Xorg-4279 | ! 166.159 us | } Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Merge branch 'mainline/function-graph' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/function-graph-tracer
-
Roel Kluin authored
*ep->reg_udccs is always set to 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Pitre authored
In the non highmem case, if two memory banks of 1GB each are provided, the second bank would evade suppression since its virtual base would be 0. Fix this by disallowing any memory bank which virtual base address is found to be lower than PAGE_OFFSET. Reported-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Ingo Molnar authored
-
Ingo Molnar authored
Merge branch 'tip/tracing/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/urgent
-
Clemens Ladisch authored
This reverts commit 7e86c0e6 ("do not overwrite EEPROM on Xonar D2/D2X") because it did not actually help with the problem. More user reports show that the overwriting of the EEPROM is not triggered by using this driver but by installing Linux, and that the installation of any other operating system (even one without any CMI8788 driver) has the same effect. In other words, the presence of this driver does not have any effect on the occurrence of the error. (So far, the available evidence seems to point to a BIOS bug.) Furthermore, it turns out that the EEPROM chip is protected against stray write commands by the command format and by requiring a separate write-enable command, so the error scenario in the previous commit (that SPI writes can be misinterpreted as an EEPROM write command) is not even theoretically possible. The mixer control that was removed as a consequence of the previous commit can only be partially emulated in userspace, which also means it cannot be seen be the in-kernel OSS API emulation, so it is better to revert that change. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Ingo Molnar authored
Conflicts: block/blktrace.c Semantic merge: kernel/trace/blktrace.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Steven Rostedt authored
Impact: prevent deadlock if ring buffer gets corrupted This patch adds a paranoid check to make sure the ring buffer consumer does not go into an infinite loop. Since the ring buffer has been set to read only, the consumer should not loop for more than the ring buffer size. A check is added to make sure the consumer does not loop more than the ring buffer size. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
-
Steven Rostedt authored
Impact: fix output of function tracer to be useful The function tracer is pretty useless if KALLSYMS is not configured. Unless you are good at reading hex values, the function tracer should select the KALLSYMS configuration. Also, the dynamic function tracer will fail its self test if KALLSYMS is not selected. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
-
Steven Rostedt authored
Impact: fix to prevent hard lockup on self tests If one of the tracers are broken and is constantly filling the ring buffer while the test of the ring buffer is running, it will hang the box. The reason is that the test is a consumer that will not stop till the ring buffer is empty. But if the tracer is broken and is constantly producing input to the buffer, this test will never end. The result is a lockup of the box. This happened when KALLSYMS was not defined and the dynamic ftrace test constantly filled the ring buffer, because the filter failed and all functions were being traced. Something was being called that constantly filled the buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: fix deadlock in blk_abort_queue() for drivers that readd to timeout list block: fix booting from partitioned md array block: revert part of 18ce3751 cciss: PCI power management reset for kexec paride/pg.c: xs(): &&/|| confusion fs/bio: bio_alloc_bioset: pass right object ptr to mempool_free block: fix bad definition of BIO_RW_SYNC bsg: Fix sense buffer bug in SG_IO
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmcLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: omap_hsmmc: Change while(); loops with finite version omap_hsmmc: recover from transfer failures omap_hsmmc: only MMC1 allows HCTL.SDVS != 1.8V omap_hsmmc: card detect irq bugfix sdhci: fix led naming mmc_test: fix basic read test s3cmci: Fix hangup in do_pio_write() Revert "sdhci: force high speed capability on some controllers" MMC: fix bug - SDHC card capacity not correct
-
- 18 Feb, 2009 8 commits
-
-
Ingo Molnar authored
Enhanced lockdep coverage of __GFP_NOFS turned up this new lockdep assert: [ 1093.677775] [ 1093.677781] ================================= [ 1093.680031] [ INFO: inconsistent lock state ] [ 1093.680031] 2.6.29-rc5-tip-01504-gb49eca1-dirty #1 [ 1093.680031] --------------------------------- [ 1093.680031] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. [ 1093.680031] kswapd0/308 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 1093.680031] (&inode->inotify_mutex){+.+.?.}, at: [<c0205942>] inotify_inode_is_dead+0x20/0x80 [ 1093.680031] {RECLAIM_FS-ON-W} state was registered at: [ 1093.680031] [<c01696b9>] mark_held_locks+0x43/0x5b [ 1093.680031] [<c016baa4>] lockdep_trace_alloc+0x6c/0x6e [ 1093.680031] [<c01cf8b0>] kmem_cache_alloc+0x20/0x150 [ 1093.680031] [<c040d0ec>] idr_pre_get+0x27/0x6c [ 1093.680031] [<c02056e3>] inotify_handle_get_wd+0x25/0xad [ 1093.680031] [<c0205f43>] inotify_add_watch+0x7a/0x129 [ 1093.680031] [<c020679e>] sys_inotify_add_watch+0x20f/0x250 [ 1093.680031] [<c010389e>] sysenter_do_call+0x12/0x35 [ 1093.680031] [<ffffffff>] 0xffffffff [ 1093.680031] irq event stamp: 60417 [ 1093.680031] hardirqs last enabled at (60417): [<c018d5f5>] call_rcu+0x53/0x59 [ 1093.680031] hardirqs last disabled at (60416): [<c018d5b9>] call_rcu+0x17/0x59 [ 1093.680031] softirqs last enabled at (59656): [<c0146229>] __do_softirq+0x157/0x16b [ 1093.680031] softirqs last disabled at (59651): [<c0106293>] do_softirq+0x74/0x15d [ 1093.680031] [ 1093.680031] other info that might help us debug this: [ 1093.680031] 2 locks held by kswapd0/308: [ 1093.680031] #0: (shrinker_rwsem){++++..}, at: [<c01b0502>] shrink_slab+0x36/0x189 [ 1093.680031] #1: (&type->s_umount_key#4){+++++.}, at: [<c01e6d77>] shrink_dcache_memory+0x110/0x1fb [ 1093.680031] [ 1093.680031] stack backtrace: [ 1093.680031] Pid: 308, comm: kswapd0 Not tainted 2.6.29-rc5-tip-01504-gb49eca1-dirty #1 [ 1093.680031] Call Trace: [ 1093.680031] [<c016947a>] valid_state+0x12a/0x13d [ 1093.680031] [<c016954e>] mark_lock+0xc1/0x1e9 [ 1093.680031] [<c016a5b4>] ? check_usage_forwards+0x0/0x3f [ 1093.680031] [<c016ab74>] __lock_acquire+0x2c6/0xac8 [ 1093.680031] [<c01688d9>] ? register_lock_class+0x17/0x228 [ 1093.680031] [<c016b3d3>] lock_acquire+0x5d/0x7a [ 1093.680031] [<c0205942>] ? inotify_inode_is_dead+0x20/0x80 [ 1093.680031] [<c08824c4>] __mutex_lock_common+0x3a/0x4cb [ 1093.680031] [<c0205942>] ? inotify_inode_is_dead+0x20/0x80 [ 1093.680031] [<c08829ed>] mutex_lock_nested+0x2e/0x36 [ 1093.680031] [<c0205942>] ? inotify_inode_is_dead+0x20/0x80 [ 1093.680031] [<c0205942>] inotify_inode_is_dead+0x20/0x80 [ 1093.680031] [<c01e6672>] dentry_iput+0x90/0xc2 [ 1093.680031] [<c01e67a3>] d_kill+0x21/0x45 [ 1093.680031] [<c01e6a46>] __shrink_dcache_sb+0x27f/0x355 [ 1093.680031] [<c01e6dc5>] shrink_dcache_memory+0x15e/0x1fb [ 1093.680031] [<c01b05ed>] shrink_slab+0x121/0x189 [ 1093.680031] [<c01b0d12>] kswapd+0x39f/0x561 [ 1093.680031] [<c01ae499>] ? isolate_pages_global+0x0/0x233 [ 1093.680031] [<c0157eae>] ? autoremove_wake_function+0x0/0x43 [ 1093.680031] [<c01b0973>] ? kswapd+0x0/0x561 [ 1093.680031] [<c0157daf>] kthread+0x41/0x82 [ 1093.680031] [<c0157d6e>] ? kthread+0x0/0x82 [ 1093.680031] [<c01043ab>] kernel_thread_helper+0x7/0x10 inotify_handle_get_wd() does idr_pre_get() which does a kmem_cache_alloc() without __GFP_FS - and is hence deadlockable under extreme MM pressure. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: MinChan Kim <minchan.kim@gmail.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Michael Buesch authored
gpio_get_value() returns 0 or nonzero, but getmiso() expects 0 or 1. Sanitize the value to a 0/1 boolean. Signed-off-by: Michael Buesch <mb@bu3sch.de> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Bernhard Walle authored
Since I don't work for SUSE any more and the bwalle@suse.de address is invalid, correct it in the copyright headers and documentation. Signed-off-by: Bernhard Walle <bernhard.walle@gmx.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Build breaks when DELL_LAPTOP=y and POWER_SUPPLY=m. DELL_LAPTOP needs to depend on POWER_SUPPLY. dell-laptop.c:(.text+0x1ef3c4): undefined reference to `power_supply_is_system_supplied' dell-laptop.c:(.text+0x1ef45e): undefined reference to `power_supply_is_system_supplied' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Bill Nottingham authored
Otherwise, these don't work when called from 32-bit userspace on 64-bit kernels. Cc: Jiri Kosina <jkosina@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Krzysztof Helt authored
Submenus of the graphics support "Support for frame buffer devices" and "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)" are broken in half after latest changes for Intel 915 mode setting support. The DRM subsection is broken because one option is put outside the choice section it depends on. The frame buffers part is broken then due to circular dependency. Fix this by make Intel frame buffers depend on CONFIG_INTEL_AGP. Kconfigs are broken by d2f59357 ("drm/i915: select framebuffer support automatically"). This is probably not only way to fix this. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Philippe De Muyter authored
The floppy driver requests an I/O port it doesn't need, and sometimes this causes a conflict with a motherboard device reported by PNPBIOS. This patch makes the floppy driver request and release only the ports it actually uses. It also factors out the request/release stuff and the io-ports list so they're all in one place now. The current floppy driver uses only these ports: 0x3f2 (FD_DOR) 0x3f4 (FD_STATUS) 0x3f5 (FD_DATA) 0x3f7 (FD_DCR/FD_DIR) but it requests 0x3f2-0x3f5 and 0x3f7, which includes the unused port 0x3f3. Some BIOSes report 0x3f3 as a motherboard resource. The PNP system driver reserves that, which causes a conflict when the floppy driver requests 0x3f2-0x3f5 later. Philippe reported that this conflict broke the floppy driver between 2.6.11 and 2.6.22. His PNPBIOS reports these devices: $ cat 00:07/id 00:07/resources # motherboard device PNP0c02 state = active io 0x80-0x80 io 0x10-0x1f io 0x22-0x3f io 0x44-0x5f io 0x90-0x9f io 0xa2-0xbf io 0x3f0-0x3f1 io 0x3f3-0x3f3 $ cat 00:03/id 00:03/resources # floppy device PNP0700 state = active io 0x3f4-0x3f5 io 0x3f2-0x3f2 Reference: http://lkml.org/lkml/2009/1/31/162Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Philippe De Muyter <phdm@macqel.be> Reported-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Philippe De Muyter <phdm@macqel.be> Cc: Adam M Belay <abelay@mit.edu> Cc: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Adam Lackorzynski authored
I have a Digi Neo 8 PCI card (114f:00b1) Serial controller: Digi International Digi Neo 8 (rev 05) that works with the jsm driver after using the following patch. Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de> Cc: Scott H Kilau <Scott_Kilau@digi.com> Cc: Wendy Xiong <wendyx@us.ibm.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-