Pull SMP updates from Thomas Gleixner:
 "A large update for SMP management:

   - Parallel CPU bringup

     The reason why people are interested in parallel bringup is to
     shorten the (kexec) reboot time of cloud servers to reduce the
     downtime of the VM tenants.

     The current fully serialized bringup does the following per AP:

       1) Prepare callbacks (allocate, intialize, create threads)
       2) Kick the AP alive (e.g. INIT/SIPI on x86)
       3) Wait for the AP to report alive state
       4) Let the AP continue through the atomic bringup
       5) Let the AP run the threaded bringup to full online state

     There are two significant delays:

       #3 The time for an AP to report alive state in start_secondary()
          on x86 has been measured in the range between 350us and 3.5ms
          depending on vendor and CPU type, BIOS microcode size etc.

       #4 The atomic bringup does the microcode update. This has been
          measured to take up to ~8ms on the primary threads depending
          on the microcode patch size to apply.

     On a two socket SKL server with 56 cores (112 threads) the boot CPU
     spends on current mainline about 800ms busy waiting for the APs to
     come up and apply microcode. That's more than 80% of the actual
     onlining procedure.

     This can be reduced significantly by splitting the bringup
     mechanism into two parts:

       1) Run the prepare callbacks and kick the AP alive for each AP
          which needs to be brought up.

          The APs wake up, do their firmware initialization and run the
          low level kernel startup code including microcode loading in
          parallel up to the first synchronization point. (#1 and #2
          above)

       2) Run the rest of the bringup code strictly serialized per CPU
          (#3 - #5 above) as it's done today.

          Parallelizing that stage of the CPU bringup might be possible
          in theory, but it's questionable whether required surgery
          would be justified for a pretty small gain.

     If the system is large enough the first AP is already waiting at
     the first synchronization point when the boot CPU finished the
     wake-up of the last AP. That reduces the AP bringup time on that
     SKL from ~800ms to ~80ms, i.e. by a factor ~10x.

     The actual gain varies wildly depending on the system, CPU,
     microcode patch size and other factors. There are some
     opportunities to reduce the overhead further, but that needs some
     deep surgery in the x86 CPU bringup code.

     For now this is only enabled on x86, but the core functionality
     obviously works for all SMP capable architectures.

   - Enhancements for SMP function call tracing so it is possible to
     locate the scheduling and the actual execution points. That allows
     to measure IPI delivery time precisely"

* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
  trace,smp: Add tracepoints for scheduling remotelly called functions
  trace,smp: Add tracepoints around remotelly called functions
  MAINTAINERS: Add CPU HOTPLUG entry
  x86/smpboot: Fix the parallel bringup decision
  x86/realmode: Make stack lock work in trampoline_compat()
  x86/smp: Initialize cpu_primary_thread_mask late
  cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
  x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
  x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
  x86/smpboot: Support parallel startup of secondary CPUs
  x86/smpboot: Implement a bit spinlock to protect the realmode stack
  x86/apic: Save the APIC virtual base address
  cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
  x86/apic: Provide cpu_primary_thread mask
  x86/smpboot: Enable split CPU startup
  cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
  cpu/hotplug: Reset task stack state in _cpu_up()
  cpu/hotplug: Remove unused state functions
  riscv: Switch to hotplug core state synchronization
  parisc: Switch to hotplug core state synchronization
  ...

Pull x86 boot updates from Thomas Gleixner:
 "Initialize FPU late.

  Right now FPU is initialized very early during boot. There is no real
  requirement to do so. The only requirement is to have it done before
  alternatives are patched.

  That's done in check_bugs() which does way more than what the function
  name suggests.

  So first rename check_bugs() to arch_cpu_finalize_init() which makes
  it clear what this is about.

  Move the invocation of arch_cpu_finalize_init() earlier in
  start_kernel() as it has to be done before fork_init() which needs to
  know the FPU register buffer size.

  With those prerequisites the FPU initialization can be moved into
  arch_cpu_finalize_init(), which removes it from the early and fragile
  part of the x86 bringup"

* tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build
  x86/fpu: Move FPU initialization into arch_cpu_finalize_init()
  x86/fpu: Mark init functions __init
  x86/fpu: Remove cpuinfo argument from init functions
  x86/init: Initialize signal frame size late
  init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()
  init: Invoke arch_cpu_finalize_init() earlier
  init: Remove check_bugs() leftovers
  um/cpu: Switch to arch_cpu_finalize_init()
  sparc/cpu: Switch to arch_cpu_finalize_init()
  sh/cpu: Switch to arch_cpu_finalize_init()
  mips/cpu: Switch to arch_cpu_finalize_init()
  m68k/cpu: Switch to arch_cpu_finalize_init()
  loongarch/cpu: Switch to arch_cpu_finalize_init()
  ia64/cpu: Switch to arch_cpu_finalize_init()
  ARM: cpu: Switch to arch_cpu_finalize_init()
  x86/cpu: Switch to arch_cpu_finalize_init()
  init: Provide arch_cpu_finalize_init()

Pull irq updates from Thomas Gleixner:
 "Updates for the interrupt subsystem:

  Core:

   - Convert the interrupt descriptor storage to a maple tree to
     overcome the limitations of the radixtree + fixed size bitmap.

     This allows us to handle very large servers with a huge number of
     guests without imposing a huge memory overhead on everyone

   - Implement optional retriggering of interrupts which utilize the
     fasteoi handler to work around a GICv3 architecture issue

  Drivers:

   - A set of fixes and updates for the Loongson/Loongarch related
     drivers

   - Workaound for an ASR8601 integration hickup which ends up with CPU
     numbering which can't be represented in the GIC implementation

   - The usual set of boring fixes and updates all over the place"

* tag 'irq-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  Revert "irqchip/mxs: Include linux/irqchip/mxs.h"
  irqchip/jcore-aic: Fix missing allocation of IRQ descriptors
  irqchip/stm32-exti: Fix warning on initialized field overwritten
  irqchip/stm32-exti: Add STM32MP15xx IWDG2 EXTI to GIC map
  irqchip/gicv3: Add a iort_pmsi_get_dev_id() prototype
  irqchip/mxs: Include linux/irqchip/mxs.h
  irqchip/clps711x: Remove unused clps711x_intc_init() function
  irqchip/mmp: Remove non-DT codepath
  irqchip/ftintc010: Mark all function static
  irqdomain: Include internals.h for function prototypes
  irqchip/loongson-eiointc: Add DT init support
  dt-bindings: interrupt-controller: Add Loongson EIOINTC
  irqchip/loongson-eiointc: Fix irq affinity setting during resume
  irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag
  irqchip/loongson-liointc: Fix IRQ trigger polarity
  irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment
  irqchip/loongson-pch-pic: Fix initialization of HT vector register
  irqchip/gic-v3-its: Enable RESEND_WHEN_IN_PROGRESS for LPIs
  genirq: Allow fasteoi handler to resend interrupts on concurrent handling
  genirq: Expand doc for PENDING and REPLAY flags
  ...

Merge tag 'core-debugobjects-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull debugobjects update from Thomas Gleixner:
 "A single update for debug objects:

   - Recheck whether debug objects is enabled before reporting a problem
     to avoid spamming the logs with messages which are caused by a
     concurrent OOM"

* tag 'core-debugobjects-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Recheck debug_objects_enabled before reporting

Pull block updates from Jens Axboe:

 - NVMe pull request via Keith:
      - Various cleanups all around (Irvin, Chaitanya, Christophe)
      - Better struct packing (Christophe JAILLET)
      - Reduce controller error logs for optional commands (Keith)
      - Support for >=64KiB block sizes (Daniel Gomez)
      - Fabrics fixes and code organization (Max, Chaitanya, Daniel
        Wagner)

 - bcache updates via Coly:
      - Fix a race at init time (Mingzhe Zou)
      - Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)

 - use page pinning in the block layer for dio (David)

 - convert old block dio code to page pinning (David, Christoph)

 - cleanups for pktcdvd (Andy)

 - cleanups for rnbd (Guoqing)

 - use the unchecked __bio_add_page() for the initial single page
   additions (Johannes)

 - fix overflows in the Amiga partition handling code (Michael)

 - improve mq-deadline zoned device support (Bart)

 - keep passthrough requests out of the IO schedulers (Christoph, Ming)

 - improve support for flush requests, making them less special to deal
   with (Christoph)

 - add bdev holder ops and shutdown methods (Christoph)

 - fix the name_to_dev_t() situation and use cases (Christoph)

 - decouple the block open flags from fmode_t (Christoph)

 - ublk updates and cleanups, including adding user copy support (Ming)

 - BFQ sanity checking (Bart)

 - convert brd from radix to xarray (Pankaj)

 - constify various structures (Thomas, Ivan)

 - more fine grained persistent reservation ioctl capability checks
   (Jingbo)

 - misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
   Jordy, Li, Min, Yu, Zhong, Waiman)

* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
  scsi/sg: don't grab scsi host module reference
  ext4: Fix warning in blkdev_put()
  block: don't return -EINVAL for not found names in devt_from_devname
  cdrom: Fix spectre-v1 gadget
  block: Improve kernel-doc headers
  blk-mq: don't insert passthrough request into sw queue
  bsg: make bsg_class a static const structure
  ublk: make ublk_chr_class a static const structure
  aoe: make aoe_class a static const structure
  block/rnbd: make all 'class' structures const
  block: fix the exclusive open mask in disk_scan_partitions
  block: add overflow checks for Amiga partition support
  block: change all __u32 annotations to __be32 in affs_hardblocks.h
  block: fix signed int overflow in Amiga partition support
  block: add capacity validation in bdev_add_partition()
  block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
  block: disallow Persistent Reservation on partitions
  reiserfs: fix blkdev_put() warning from release_journal_dev()
  block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
  block: document the holder argument to blkdev_get_by_path
  ...

Pull io_uring updates from Jens Axboe:
 "Nothing major in this release, just a bunch of cleanups and some
  optimizations around networking mostly.

   - clean up file request flags handling (Christoph)

   - clean up request freeing and CQ locking (Pavel)

   - support for using pre-registering the io_uring fd at setup time
     (Josh)

   - Add support for user allocated ring memory, rather than having the
     kernel allocate it. Mostly for packing rings into a huge page (me)

   - avoid an unnecessary double retry on receive (me)

   - maintain ordering for task_work, which also improves performance
     (me)

   - misc cleanups/fixes (Pavel, me)"

* tag 'for-6.5/io_uring-2023-06-23' of git://git.kernel.dk/linux: (39 commits)
  io_uring: merge conditional unlock flush helpers
  io_uring: make io_cq_unlock_post static
  io_uring: inline __io_cq_unlock
  io_uring: fix acquire/release annotations
  io_uring: kill io_cq_unlock()
  io_uring: remove IOU_F_TWQ_FORCE_NORMAL
  io_uring: don't batch task put on reqs free
  io_uring: move io_clean_op()
  io_uring: inline io_dismantle_req()
  io_uring: remove io_free_req_tw
  io_uring: open code io_put_req_find_next
  io_uring: add helpers to decode the fixed file file_ptr
  io_uring: use io_file_from_index in io_msg_grab_file
  io_uring: use io_file_from_index in __io_sync_cancel
  io_uring: return REQ_F_ flags from io_file_get_flags
  io_uring: remove io_req_ffs_set
  io_uring: remove a confusing comment above io_file_get_flags
  io_uring: remove the mode variable in io_file_get_flags
  io_uring: remove __io_file_supports_nowait
  io_uring: wait interruptibly for request completions on exit
  ...

Pull splice updates from Jens Axboe:
 "This kills off ITER_PIPE to avoid a race between truncate,
  iov_iter_revert() on the pipe and an as-yet incomplete DMA to a bio
  with unpinned/unref'ed pages from an O_DIRECT splice read. This causes
  memory corruption.

  Instead, we either use (a) filemap_splice_read(), which invokes the
  buffered file reading code and splices from the pagecache into the
  pipe; (b) copy_splice_read(), which bulk-allocates a buffer, reads
  into it and then pushes the filled pages into the pipe; or (c) handle
  it in filesystem-specific code.

  Summary:

   - Rename direct_splice_read() to copy_splice_read()

   - Simplify the calculations for the number of pages to be reclaimed
     in copy_splice_read()

   - Turn do_splice_to() into a helper, vfs_splice_read(), so that it
     can be used by overlayfs and coda to perform the checks on the
     lower fs

   - Make vfs_splice_read() jump to copy_splice_read() to handle
     direct-I/O and DAX

   - Provide shmem with its own splice_read to handle non-existent pages
     in the pagecache. We don't want a ->read_folio() as we don't want
     to populate holes, but filemap_get_pages() requires it

   - Provide overlayfs with its own splice_read to call down to a lower
     layer as overlayfs doesn't provide ->read_folio()

   - Provide coda with its own splice_read to call down to a lower layer
     as coda doesn't provide ->read_folio()

   - Direct ->splice_read to copy_splice_read() in tty, procfs, kernfs
     and random files as they just copy to the output buffer and don't
     splice pages

   - Provide wrappers for afs, ceph, ecryptfs, ext4, f2fs, nfs, ntfs3,
     ocfs2, orangefs, xfs and zonefs to do locking and/or revalidation

   - Make cifs use filemap_splice_read()

   - Replace pointers to generic_file_splice_read() with pointers to
     filemap_splice_read() as DIO and DAX are handled in the caller;
     filesystems can still provide their own alternate ->splice_read()
     op

   - Remove generic_file_splice_read()

   - Remove ITER_PIPE and its paraphernalia as generic_file_splice_read
     was the only user"

* tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux: (31 commits)
  splice: kdoc for filemap_splice_read() and copy_splice_read()
  iov_iter: Kill ITER_PIPE
  splice: Remove generic_file_splice_read()
  splice: Use filemap_splice_read() instead of generic_file_splice_read()
  cifs: Use filemap_splice_read()
  trace: Convert trace/seq to use copy_splice_read()
  zonefs: Provide a splice-read wrapper
  xfs: Provide a splice-read wrapper
  orangefs: Provide a splice-read wrapper
  ocfs2: Provide a splice-read wrapper
  ntfs3: Provide a splice-read wrapper
  nfs: Provide a splice-read wrapper
  f2fs: Provide a splice-read wrapper
  ext4: Provide a splice-read wrapper
  ecryptfs: Provide a splice-read wrapper
  ceph: Provide a splice-read wrapper
  afs: Provide a splice-read wrapper
  9p: Add splice_read wrapper
  net: Make sock_splice_read() use copy_splice_read() by default
  tty, proc, kernfs, random: Use copy_splice_read()
  ...

Pull btrfs updates from David Sterba:
 "Mainly core changes, refactoring and optimizations.

  Performance is improved in some areas, overall there may be a
  cumulative improvement due to refactoring that removed lookups in the
  IO path or simplified IO submission tracking.

  Core:

   - submit IO synchronously for fast checksums (crc32c and xxhash),
     remove high priority worker kthread

   - read extent buffer in one go, simplify IO tracking, bio submission
     and locking

   - remove additional tracking of redirtied extent buffers, originally
     added for zoned mode but actually not needed

   - track ordered extent pointer in bio to avoid rbtree lookups during
     IO

   - scrub, use recovered data stripes as cache to avoid unnecessary
     read

   - in zoned mode, optimize logical to physical mappings of extents

   - remove PageError handling, not set by VFS nor writeback

   - cleanups, refactoring, better structure packing

   - lots of error handling improvements

   - more assertions, lockdep annotations

   - print assertion failure with the exact line where it happens

   - tracepoint updates

   - more debugging prints

  Performance:

   - speedup in fsync(), better tracking of inode logged status can
     avoid transaction commit

   - IO path structures track logical offsets in data structures and
     does not need to look it up

  User visible changes:

   - don't commit transaction for every created subvolume, this can
     reduce time when many subvolumes are created in a batch

   - print affected files when relocation fails

   - trigger orphan file cleanup during START_SYNC ioctl

  Notable fixes:

   - fix crash when disabling quota and relocation

   - fix crashes when removing roots from drity list

   - fix transacion abort during relocation when converting from newer
     profiles not covered by fallback

   - in zoned mode, stop reclaiming block groups if filesystem becomes
     read-only

   - fix rare race condition in tree mod log rewind that can miss some
     btree node slots

   - with enabled fsverity, drop up-to-date page bit in case the
     verification fails"

* tag 'for-6.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (194 commits)
  btrfs: fix race between quota disable and relocation
  btrfs: add comment to struct btrfs_fs_info::dirty_cowonly_roots
  btrfs: fix race when deleting free space root from the dirty cow roots list
  btrfs: fix race when deleting quota root from the dirty cow roots list
  btrfs: tracepoints: also show actual number of the outstanding extents
  btrfs: update i_version in update_dev_time
  btrfs: make btrfs_compressed_bioset static
  btrfs: add handling for RAID1C23/DUP to btrfs_reduce_alloc_profile
  btrfs: scrub: remove btrfs_fs_info::scrub_wr_completion_workers
  btrfs: scrub: remove scrub_ctx::csum_list member
  btrfs: do not BUG_ON after failure to migrate space during truncation
  btrfs: do not BUG_ON on failure to get dir index for new snapshot
  btrfs: send: do not BUG_ON() on unexpected symlink data extent
  btrfs: do not BUG_ON() when dropping inode items from log root
  btrfs: replace BUG_ON() at split_item() with proper error handling
  btrfs: do not BUG_ON() on tree mod log failures at btrfs_del_ptr()
  btrfs: do not BUG_ON() on tree mod log failures at insert_ptr()
  btrfs: do not BUG_ON() on tree mod log failure at insert_new_root()
  btrfs: do not BUG_ON() on tree mod log failures at push_nodes_for_insert()
  btrfs: abort transaction at update_ref_for_cow() when ref count is zero
  ...

Pull zonefs updates from Damien Le Moal:

 - Modify the synchronous direct write path to use iomap instead of
   manually coding issuing zone append write BIOs (me)

 - Use the FMODE_CAN_ODIRECT file flag to indicate support from direct
   IO instead of using the old way with noop direct_io methods
   (Christoph)

* tag 'zonefs-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
  zonefs: use iomap for synchronous direct writes

Pull erofs updates from Gao Xiang:
 "No outstanding new feature for this cycle.

  Most of these commits are decompression cleanups which are part of the
  ongoing development for subpage/folio compression support as well as
  xattr cleanups for the upcoming xattr bloom filter optimization [1].

  In addition, there are bugfixes to address some corner cases of
  compressed images due to global data de-duplication and arm64 16k
  pages.

  Summary:

   - Fix rare I/O hang on deduplicated compressed images due to loop
     hooked chains

   - Fix compact compression layout of 16k blocks on arm64 devices

   - Fix atomic context detection of async decompression

   - Decompression/Xattr code cleanups"

Link: https://lore.kernel.org/r/20230621083209.116024-1-jefflexu@linux.alibaba.com [1]

* tag 'erofs-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: clean up zmap.c
  erofs: remove unnecessary goto
  erofs: Fix detection of atomic context
  erofs: use separate xattr parsers for listxattr/getxattr
  erofs: unify inline/shared xattr iterators for listxattr/getxattr
  erofs: make the size of read data stored in buffer_ofs
  erofs: unify xattr_iter structures
  erofs: use absolute position in xattr iterator
  erofs: fix compact 4B support for 16k block size
  erofs: convert erofs_read_metabuf() to erofs_bread() for xattr
  erofs: use poison pointer to replace the hard-coded address
  erofs: use struct lockref to replace handcrafted approach
  erofs: adapt managed inode operations into folios
  erofs: kill hooked chains to avoid loops on deduplicated compressed images
  erofs: avoid on-stack pagepool directly passed by arguments
  erofs: allocate extra bvec pages directly instead of retrying
  erofs: clean up z_erofs_pcluster_readmore()
  erofs: remove the member readahead from struct z_erofs_decompress_frontend
  erofs: fold in z_erofs_decompress()

Pull fsverity updates from Eric Biggers:
 "Several updates for fs/verity/:

   - Do all hashing with the shash API instead of with the ahash API.

     This simplifies the code and reduces API overhead. It should also
     make things slightly easier for XFS's upcoming support for
     fsverity. It does drop fsverity's support for off-CPU hash
     accelerators, but that support was incomplete and not known to be
     used

   - Update and export fsverity_get_digest() so that it's ready for
     overlayfs's upcoming support for fsverity checking of lowerdata

   - Improve the documentation for builtin signature support

   - Fix a bug in the large folio support"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
  fsverity: improve documentation for builtin signature support
  fsverity: rework fsverity_get_digest() again
  fsverity: simplify error handling in verify_data_block()
  fsverity: don't use bio_first_page_all() in fsverity_verify_bio()
  fsverity: constify fsverity_hash_alg
  fsverity: use shash API instead of ahash API

Pull fscrypt update from Eric Biggers:
 "Just one flex array conversion patch"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
  fscrypt: Replace 1-element array with flexible array

Pull nfsd updates from Chuck Lever:

 - Clean-ups in the READ path in anticipation of MSG_SPLICE_PAGES

 - Better NUMA awareness when allocating pages and other objects

 - A number of minor clean-ups to XDR encoding

 - Elimination of a race when accepting a TCP socket

 - Numerous observability enhancements

* tag 'nfsd-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (46 commits)
  nfsd: remove redundant assignments to variable len
  svcrdma: Fix stale comment
  NFSD: Distinguish per-net namespace initialization
  nfsd: move init of percpu reply_cache_stats counters back to nfsd_init_net
  SUNRPC: Address RCU warning in net/sunrpc/svc.c
  SUNRPC: Use sysfs_emit in place of strlcpy/sprintf
  SUNRPC: Remove transport class dprintk call sites
  SUNRPC: Fix comments for transport class registration
  svcrdma: Remove an unused argument from __svc_rdma_put_rw_ctxt()
  svcrdma: trace cc_release calls
  svcrdma: Convert "might sleep" comment into a code annotation
  NFSD: Add an nfsd4_encode_nfstime4() helper
  SUNRPC: Move initialization of rq_stime
  SUNRPC: Optimize page release in svc_rdma_sendto()
  svcrdma: Prevent page release when nothing was received
  svcrdma: Revert 2a1e4f21 ("svcrdma: Normalize Send page handling")
  SUNRPC: Revert 57990067 ("svcrdma: Remove unused sc_pages field")
  SUNRPC: Revert cc93ce95 ("svcrdma: Retain the page backing rq_res.head[0].iov_base")
  NFSD: add encoding of op_recall flag for write delegation
  NFSD: Add "official" reviewers for this subsystem
  ...

Pull vfs mount updates from Christian Brauner:
 "This contains the work to extend move_mount() to allow adding a mount
  beneath the topmost mount of a mount stack.

  There are two LWN articles about this. One covers the original patch
  series in [1]. The other in [2] summarizes the session and roughly the
  discussion between Al and me at LSFMM. The second article also goes
  into some good questions from attendees.

  Since all details are found in the relevant commit with a technical
  dive into semantics and locking at the end I'm only adding the
  motivation and core functionality for this from commit message and
  leave out the invasive details. The code is also heavily commented and
  annotated as well which was explicitly requested.

  TL;DR:

    > mount -t ext4 /dev/sda /mnt
      |
      └─/mnt    /dev/sda    ext4

    > mount --beneath -t xfs /dev/sdb /mnt
      |
      └─/mnt    /dev/sdb    xfs
        └─/mnt  /dev/sda    ext4

    > umount /mnt
      |
      └─/mnt    /dev/sdb    xfs

  The longer motivation is that various distributions are adding or are
  in the process of adding support for system extensions and in the
  future configuration extensions through various tools. A more detailed
  explanation on system and configuration extensions can be found on the
  manpage which is listed below at [3].

  System extension images may – dynamically at runtime — extend the
  /usr/ and /opt/ directory hierarchies with additional files. This is
  particularly useful on immutable system images where a /usr/ and/or
  /opt/ hierarchy residing on a read-only file system shall be extended
  temporarily at runtime without making any persistent modifications.

  When one or more system extension images are activated, their /usr/
  and /opt/ hierarchies are combined via overlayfs with the same
  hierarchies of the host OS, and the host /usr/ and /opt/ overmounted
  with it ("merging"). When they are deactivated, the mount point is
  disassembled — again revealing the unmodified original host version of
  the hierarchy ("unmerging"). Merging thus makes the extension's
  resources suddenly appear below the /usr/ and /opt/ hierarchies as if
  they were included in the base OS image itself. Unmerging makes them
  disappear again, leaving in place only the files that were shipped
  with the base OS image itself.

  System configuration images are similar but operate on directories
  containing system or service configuration.

  On nearly all modern distributions mount propagation plays a crucial
  role and the rootfs of the OS is a shared mount in a peer group
  (usually with peer group id 1):

     TARGET  SOURCE  FSTYPE  PROPAGATION  MNT_ID  PARENT_ID
     /       /       ext4    shared:1     29      1

  On such systems all services and containers run in a separate mount
  namespace and are pivot_root()ed into their rootfs. A separate mount
  namespace is almost always used as it is the minimal isolation
  mechanism services have. But usually they are even much more isolated
  up to the point where they almost become indistinguishable from
  containers.

  Mount propagation again plays a crucial role here. The rootfs of all
  these services is a slave mount to the peer group of the host rootfs.
  This is done so the service will receive mount propagation events from
  the host when certain files or directories are updated.

  In addition, the rootfs of each service, container, and sandbox is
  also a shared mount in its separate peer group:

     TARGET  SOURCE  FSTYPE  PROPAGATION         MNT_ID  PARENT_ID
     /       /       ext4    shared:24 master:1  71      47

  For people not too familiar with mount propagation, the master:1 means
  that this is a slave mount to peer group 1. Which as one can see is
  the host rootfs as indicated by shared:1 above. The shared:24
  indicates that the service rootfs is a shared mount in a separate peer
  group with peer group id 24.

  A service may run other services. Such nested services will also have
  a rootfs mount that is a slave to the peer group of the outer service
  rootfs mount.

  For containers things are just slighly different. A container's rootfs
  isn't a slave to the service's or host rootfs' peer group. The rootfs
  mount of a container is simply a shared mount in its own peer group:

     TARGET                    SOURCE  FSTYPE  PROPAGATION  MNT_ID  PARENT_ID
     /home/ubuntu/debian-tree  /       ext4    shared:99    61      60

  So whereas services are isolated OS components a container is treated
  like a separate world and mount propagation into it is restricted to a
  single well known mount that is a slave to the peer group of the
  shared mount /run on the host:

     TARGET                  SOURCE              FSTYPE  PROPAGATION  MNT_ID  PARENT_ID
     /propagate/debian-tree  /run/host/incoming  tmpfs   master:5     71      68

  Here, the master:5 indicates that this mount is a slave to the peer
  group with peer group id 5. This allows to propagate mounts into the
  container and served as a workaround for not being able to insert
  mounts into mount namespaces directly. But the new mount api does
  support inserting mounts directly. For the interested reader the
  blogpost in [4] might be worth reading where I explain the old and the
  new approach to inserting mounts into mount namespaces.

  Containers of course, can themselves be run as services. They often
  run full systems themselves which means they again run services and
  containers with the exact same propagation settings explained above.

  The whole system is designed so that it can be easily updated,
  including all services in various fine-grained ways without having to
  enter every single service's mount namespace which would be
  prohibitively expensive. The mount propagation layout has been
  carefully chosen so it is possible to propagate updates for system
  extensions and configurations from the host into all services.

  The simplest model to update the whole system is to mount on top of
  /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc
  will then propagate into every service. This works cleanly the first
  time. However, when the system is updated multiple times it becomes
  necessary to unmount the first update on /opt, /usr, /etc and then
  propagate the new update. But this means, there's an interval where
  the old base system is accessible. This has to be avoided to protect
  against downgrade attacks.

  The vfs already exposes a mechanism to userspace whereby mounts can be
  mounted beneath an existing mount. Such mounts are internally referred
  to as "tucked". The patch series exposes the ability to mount beneath
  a top mount through the new MOVE_MOUNT_BENEATH flag for the
  move_mount() system call. This allows userspace to seamlessly upgrade
  mounts. After this series the only thing that will have changed is
  that mounting beneath an existing mount can be done explicitly instead
  of just implicitly.

  The crux is that the proposed mechanism already exists and that it is
  so powerful as to cover cases where mounts are supposed to be updated
  with new versions. Crucially, it offers an important flexibility.
  Namely that updates to a system may either be forced or can be delayed
  and the umount of the top mount be left to a service if it is a
  cooperative one"

Link: https://lwn.net/Articles/927491 [1]
Link: https://lwn.net/Articles/934094 [2]
Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [3]
Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [4]
Link: https://github.com/flatcar/sysext-bakery
Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1
Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2
Link: https://github.com/systemd/systemd/pull/26013

* tag 'v6.5/vfs.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs: allow to mount beneath top mount
  fs: use a for loop when locking a mount
  fs: properly document __lookup_mnt()
  fs: add path_mounted()

Pull vfs file handling updates from Christian Brauner:
 "This contains Amir's work to fix a long-standing problem where an
  unprivileged overlayfs mount can be used to avoid fanotify permission
  events that were requested for an inode or superblock on the
  underlying filesystem.

  Some background about files opened in overlayfs. If a file is opened
  in overlayfs @file->f_path will refer to a "fake" path. What this
  means is that while @file->f_inode will refer to inode of the
  underlying layer, @file->f_path refers to an overlayfs
  {dentry,vfsmount} pair. The reasons for doing this are out of scope
  here but it is the reason why the vfs has been providing the
  open_with_fake_path() helper for overlayfs for very long time now. So
  nothing new here.

  This is for sure not very elegant and everyone including the overlayfs
  maintainers agree. Improving this significantly would involve more
  fragile and potentially rather invasive changes.

  In various codepaths access to the path of the underlying filesystem
  is needed for such hybrid file. The best example is fsnotify where
  this becomes security relevant. Passing the overlayfs
  @file->f_path->dentry will cause fsnotify to skip generating fsnotify
  events registered on the underlying inode or superblock.

  To fix this we extend the vfs provided open_with_fake_path() concept
  for overlayfs to create a backing file container that holds the real
  path and to expose a helper that can be used by relevant callers to
  get access to the path of the underlying filesystem through the new
  file_real_path() helper. This pattern is similar to what we do in
  d_real() and d_real_inode().

  The first beneficiary is fsnotify and fixes the security sensitive
  problem mentioned above.

  There's a couple of nice cleanups included as well.

  Over time, the old open_with_fake_path() helper added specifically for
  overlayfs a long time ago started to get used in other places such as
  cachefiles. Even though cachefiles have nothing to do with hybrid
  files.

  The only reason cachefiles used that concept was that files opened
  with open_with_fake_path() aren't charged against the caller's open
  file limit by raising FMODE_NOACCOUNT. It's just mere coincidence that
  both overlayfs and cachefiles need to ensure to not overcharge the
  caller for their internal open calls.

  So this work disentangles FMODE_NOACCOUNT use cases and backing file
  use-cases by adding the FMODE_BACKING flag which indicates that the
  file can be used to retrieve the backing file of another filesystem.
  (Fyi, Jens will be sending you a really nice cleanup from Christoph
  that gets rid of 3 FMODE_* flags otherwise this would be the last
  fmode_t bit we'd be using.)

  So now overlayfs becomes the sole user of the renamed
  open_with_fake_path() helper which is now named backing_file_open().
  For internal kernel users such as cachefiles that are only interested
  in FMODE_NOACCOUNT but not in FMODE_BACKING we add a new
  kernel_file_open() helper which opens a file without being charged
  against the caller's open file limit. All new helpers are properly
  documented and clearly annotated to mention their special uses.

  We also rename vfs_tmpfile_open() to kernel_tmpfile_open() to clearly
  distinguish it from vfs_tmpfile() and align it the other kernel_*()
  internal helpers"

* tag 'v6.5/vfs.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  ovl: enable fsnotify events on underlying real files
  fs: use backing_file container for internal files with "fake" f_path
  fs: move kmem_cache_zalloc() into alloc_empty_file*() helpers
  fs: use a helper for opening kernel internal files
  fs: rename {vfs,kernel}_tmpfile_open()

Pull vfs rename locking updates from Christian Brauner:
 "This contains the work from Jan to fix problems with cross-directory
  renames originally reported in [1].

  To quickly sum it up some filesystems (so far we know at least about
  ext4, udf, f2fs, ocfs2, likely also reiserfs, gfs2 and others) need to
  lock the directory when it is being renamed into another directory.

  This is because we need to update the parent pointer in the directory
  in that case and if that races with other operations on the directory,
  in particular a conversion from one directory format into another, bad
  things can happen.

  So far we've done the locking in the filesystem code but recently
  Darrick pointed out in [2] that the RENAME_EXCHANGE case was missing.
  That one is particularly nasty because RENAME_EXCHANGE can arbitrarily
  mix regular files and directories and proper lock ordering is not
  achievable in the filesystems alone.

  This patch set adds locking into vfs_rename() so that not only parent
  directories but also moved inodes, regardless of whether they are
  directories or not, are locked when calling into the filesystem.

  This means establishing a locking order for unrelated directories. New
  helpers are added for this purpose and our documentation is updated to
  cover this in detail.

  The locking is now actually easier to follow as we now always lock
  source and target. We've always locked the target independent of
  whether it was a directory or file and we've always locked source if
  it was a regular file. The exact details for why this came about can
  be found in [3] and [4]"

Link: https://lore.kernel.org/all/20230117123735.un7wbamlbdihninm@quack3 [1]
Link: https://lore.kernel.org/all/20230517045836.GA11594@frogsfrogsfrogs [2]
Link: https://lore.kernel.org/all/20230526-schrebergarten-vortag-9cd89694517e@brauner [3]
Link: https://lore.kernel.org/all/20230530-seenotrettung-allrad-44f4b00139d4@brauner [4]

* tag 'v6.5/vfs.rename.locking' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs: Restrict lock_two_nondirectories() to non-directory inodes
  fs: Lock moved directories
  fs: Establish locking order for unrelated directories
  Revert "f2fs: fix potential corruption when moving a directory"
  Revert "udf: Protect rename against modification of moved directory"
  ext4: Remove ext4 locking of moved directory

Pull misc vfs updates from Christian Brauner:
 "Miscellaneous features, cleanups, and fixes for vfs and individual fs

  Features:

   - Use mode 0600 for file created by cachefilesd so it can be run by
     unprivileged users. This aligns them with directories which are
     already created with mode 0700 by cachefilesd

   - Reorder a few members in struct file to prevent some false sharing
     scenarios

   - Indicate that an eventfd is used a semaphore in the eventfd's
     fdinfo procfs file

   - Add a missing uapi header for eventfd exposing relevant uapi
     defines

   - Let the VFS protect transitions of a superblock from read-only to
     read-write in addition to the protection it already provides for
     transitions from read-write to read-only. Protecting read-only to
     read-write transitions allows filesystems such as ext4 to perform
     internal writes, keeping writers away until the transition is
     completed

  Cleanups:

   - Arnd removed the architecture specific arch_report_meminfo()
     prototypes and added a generic one into procfs.h. Note, we got a
     report about a warning in amdpgpu codepaths that suggested this was
     bisectable to this change but we concluded it was a false positive

   - Remove unused parameters from split_fs_names()

   - Rename put_and_unmap_page() to unmap_and_put_page() to let the name
     reflect the order of the cleanup operation that has to unmap before
     the actual put

   - Unexport buffer_check_dirty_writeback() as it is not used outside
     of block device aops

   - Stop allocating aio rings from highmem

   - Protecting read-{only,write} transitions in the VFS used open-coded
     barriers in various places. Replace them with proper little helpers
     and document both the helpers and all barrier interactions involved
     when transitioning between read-{only,write} states

   - Use flexible array members in old readdir codepaths

  Fixes:

   - Use the correct type __poll_t for epoll and eventfd

   - Replace all deprecated strlcpy() invocations, whose return value
     isn't checked with an equivalent strscpy() call

   - Fix some kernel-doc warnings in fs/open.c

   - Reduce the stack usage in jffs2's xattr codepaths finally getting
     rid of this: fs/jffs2/xattr.c:887:1: error: the frame size of 1088
     bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
     royally annoying compilation warning

   - Use __FMODE_NONOTIFY instead of FMODE_NONOTIFY where an int and not
     fmode_t is required to avoid fmode_t to integer degradation
     warnings

   - Create coredumps with O_WRONLY instead of O_RDWR. There's a long
     explanation in that commit how O_RDWR is actually a bug which we
     found out with the help of Linus and git archeology

   - Fix "no previous prototype" warnings in the pipe codepaths

   - Add overflow calculations for remap_verify_area() as a signed
     addition overflow could be triggered in xfstests

   - Fix a null pointer dereference in sysv

   - Use an unsigned variable for length calculations in jfs avoiding
     compilation warnings with gcc 13

   - Fix a dangling pipe pointer in the watch queue codepath

   - The legacy mount option parser provided as a fallback by the VFS
     for filesystems not yet converted to the new mount api did prefix
     the generated mount option string with a leading ',' causing issues
     for some filesystems

   - Fix a repeated word in a comment in fs.h

   - autofs: Update the ctime when mtime is updated as mandated by
     POSIX"

* tag 'v6.5/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
  readdir: Replace one-element arrays with flexible-array members
  fs: Provide helpers for manipulating sb->s_readonly_remount
  fs: Protect reconfiguration of sb read-write from racing writes
  eventfd: add a uapi header for eventfd userspace APIs
  autofs: set ctime as well when mtime changes on a dir
  eventfd: show the EFD_SEMAPHORE flag in fdinfo
  fs/aio: Stop allocating aio rings from HIGHMEM
  fs: Fix comment typo
  fs: unexport buffer_check_dirty_writeback
  fs: avoid empty option when generating legacy mount string
  watch_queue: prevent dangling pipe pointer
  fs.h: Optimize file struct to prevent false sharing
  highmem: Rename put_and_unmap_page() to unmap_and_put_page()
  cachefiles: Allow the cache to be non-root
  init: remove unused names parameter in split_fs_names()
  jfs: Use unsigned variable for length calculations
  fs/sysv: Null check to prevent null-ptr-deref bug
  fs: use UB-safe check for signed addition overflow in remap_verify_area
  procfs: consolidate arch_report_meminfo declaration
  fs: pipe: reveal missing function protoypes
  ...

Pull ntfs updates from Christian Brauner:
 "A pile of various smaller fixes for ntfs"

* tag 'v6.5/fs.ntfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  ntfs: do not dereference a null ctx on error
  ntfs: Remove unneeded semicolon
  ntfs: Correct spelling
  ntfs: remove redundant initialization to pointer cb_sb_start

Pull auxdisplay update from Miguel Ojeda:
 "A single cleanup for i2c drivers to switch them back to use
  '.probe()'"

* tag 'auxdisplay-6.5' of https://github.com/ojeda/linux:
  auxdisplay: Switch i2c drivers back to use .probe()

Pull rust updates from Miguel Ojeda:
 "A fairly small one in terms of feature additions. Most of the changes
  in terms of lines come from the upgrade to the new version of the
  toolchain (which in turn is big due to the vendored 'alloc' crate).

  Upgrade to Rust 1.68.2:

   - This is the first such upgrade, and we will try to update it often
     from now on, in order to remain close to the latest release, until
     a minimum version (which is "in the future") can be established.

     The upgrade brings the stabilization of 4 features we used (and 2
     more that we used in our old 'rust' branch).

     Commit 3ed03f4d ("rust: upgrade to Rust 1.68.2") contains the
     details and rationale.

  pin-init API:

   - Several internal improvements and fixes to the pin-init API, e.g.
     allowing to use 'Self' in a struct definition with '#[pin_data]'.

  'error' module:

   - New 'name()' method for the 'Error' type (with 'errname()'
     integration), used to implement the 'Debug' trait for 'Error'.

   - Add error codes from 'include/linux/errno.h' to the list of Rust
     'Error' constants.

   - Allow specifying error type on the 'Result' type (with the default
     still being our usual 'Error' type).

  'str' module:

   - 'TryFrom' implementation for 'CStr', and new 'to_cstring()' method
     based on it.

  'sync' module:

   - Implement 'AsRef' trait for 'Arc', allowing to use 'Arc' in code
     that is generic over smart pointer types.

   - Add 'ptr_eq' method to 'Arc' for easier, less error prone
     comparison between two 'Arc' pointers.

   - Reword the 'Send' safety comment for 'Arc', and avoid referencing
     it from the 'Sync' one.

  'task' module:

   - Implement 'Send' marker for 'Task'.

  'types' module:

   - Implement 'Send' and 'Sync' markers for 'ARef<T>' when 'T' is
     'AlwaysRefCounted', 'Send' and 'Sync'.

  Other changes:

   - Documentation improvements and '.gitattributes' change to start
     using the Rust diff driver"

* tag 'rust-6.5' of https://github.com/Rust-for-Linux/linux:
  rust: error: `impl Debug` for `Error` with `errname()` integration
  rust: task: add `Send` marker to `Task`
  rust: specify when `ARef` is thread safe
  rust: sync: reword the `Arc` safety comment for `Sync`
  rust: sync: reword the `Arc` safety comment for `Send`
  rust: sync: implement `AsRef<T>` for `Arc<T>`
  rust: sync: add `Arc::ptr_eq`
  rust: error: add missing error codes
  rust: str: add conversion from `CStr` to `CString`
  rust: error: allow specifying error type on `Result`
  rust: init: update macro expansion example in docs
  rust: macros: replace Self with the concrete type in #[pin_data]
  rust: macros: refactor generics parsing of `#[pin_data]` into its own function
  rust: macros: fix usage of `#[allow]` in `quote!`
  docs: rust: point directly to the standalone installers
  .gitattributes: set diff driver for Rust source code files
  rust: upgrade to Rust 1.68.2
  rust: arc: fix intra-doc link in `Arc<T>::init`
  rust: alloc: clarify what is the upstream version

Pull s390 updates from Alexander Gordeev:

 - Use correct type for size of memory allocated for ELF core header on
   kernel crash.

 - Fix insecure W+X mapping warning when KASAN shadow memory range is
   not aligned on page boundary.

 - Avoid allocation of short by one page KASAN shadow memory when the
   original memory range is less than (PAGE_SIZE << 3).

 - Fix virtual vs physical address confusion in physical memory
   enumerator. It is not a real issue, since virtual and physical
   addresses are currently the same.

 - Set CONFIG_NET_TC_SKB_EXT=y in s390 config files as it is required
   for offloading TC as well as bridges on switchdev capable ConnectX
   devices.

* tag 's390-6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/defconfigs: set CONFIG_NET_TC_SKB_EXT=y
  s390/boot: fix physmem_info virtual vs physical address confusion
  s390/kasan: avoid short by one page shadow memory
  s390/kasan: fix insecure W+X mapping warning
  s390/crash: use the correct type for memory allocation

Pull nios2 updates from Dinh Nguyen:

 - Convert pgtable constructor/destructors to ptdesc

 - Replace strlcpy with strscpy

* tag 'nios2_updates_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  nios2: Replace all non-returning strlcpy with strscpy
  nios2: Convert __pte_free_tlb() to use ptdescs

Merge tag 'irqchip-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates from Marc Zyngier:

  - A number of Loogson/Loogarch fixes

  - Allow the core code to retrigger an interrupt that has
    fired while the same interrupt is being handled on another
    CPU, papering over a GICv3 architecture issue

  - Work around an integration problem on ASR8601, where the CPU
    numbering isn't representable in the GIC implementation...

  - Add some missing interrupt to the STM32 irqchip

  - A bunch of warning squashing triggered by W=1 builds

Link: https://lore.kernel.org/r/20230623224345.3577134-1-maz@kernel.org

Pull i2c fixes from Wolfram Sang:
 "Nothing fancy. Two driver and one DT binding fix"

* tag 'i2c-for-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx-lpi2c: fix type char overflow issue when calculating the clock cycle
  i2c: qup: Add missing unwind goto in qup_i2c_probe()
  dt-bindings: i2c: opencores: Add missing type for "regstep"

Pull perf fixes from Borislav Petkov:

 - Drop the __weak attribute from a function prototype as it otherwise
   leads to the function getting replaced by a dummy stub

 - Fix the umask value setup of the frontend event as former is
   different on two Intel cores

* tag 'perf_urgent_for_v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Fix the FRONTEND encoding on GNR and MTL
  perf/core: Drop __weak attribute from arch_perf_update_userpage() prototype

Pull objtool fix from Borislav Petkov:

 - Add a ORC format hash to vmlinux and modules in order for other tools
   which use it, to detect changes to it and adapt accordingly

* tag 'objtool_urgent_for_v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Add ELF section with ORC version identifier

Pull x86 fixes from Borislav Petkov:

 - Do not use set_pgd() when updating the KASLR trampoline pgd entry
   because that updates the user PGD too on KPTI builds, resulting in
   memory corruption

 - Prevent a panic in the IO-APIC setup code due to conflicting command
   line parameters

* tag 'x86_urgent_for_v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Fix kernel panic when booting with intremap=off and x2apic_phys
  x86/mm: Avoid using set_pgd() outside of real PGD pages

Pull drm fixes from Dave Airlie:
 "Very quiet last week, just two misc fixes, one dp-mst and one qaic:

  qaic:
   - dma-buf import fix

  dp-mst:
   - fix NULL ptr deref"

[ It turns out it was a quiet week because Alex Deucher hadn't sent in
  his pending AMD changes. So they are coming next    - Linus ]

* tag 'drm-fixes-2023-06-23' of git://anongit.freedesktop.org/drm/drm:
  drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2
  accel/qaic: Call DRM helper function to destroy prime GEM

Pull ARM SoC fixes from Arnd Bergmann:
 "The final bug fixes for Qualcomm and Rockchips came in, all of them
  for devicetree files:

   - Devices on Qualcomm SC7180/SC7280 that are cache coherent are now
     marked so correctly to fix a regression after a change in kernel
     behavior

   - Rockchips has a few minor changes for correctness of regulator and
     cache properties, as well as fixes for incorrect behavior of the
     RK3568 PCI controller and reset pins on two boards"

* tag 'arm-fixes-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: qcom: sc7280: Mark SCM as dma-coherent for chrome devices
  arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for trogdor
  arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for IDP
  dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent
  arm64: dts: rockchip: Fix rk356x PCIe register and range mappings
  arm64: dts: rockchip: fix button reset pin for nanopi r5c
  arm64: dts: rockchip: fix nEXTRST on SOQuartz
  arm64: dts: rockchip: add missing cache properties
  arm64: dts: rockchip: fix USB regulator on ROCK64

Pull btrfs fix from David Sterba:
 "Unfortunately the recent u32 overflow fix was not complete, there was
  one conversion left, assertion not triggered by my tests but caught by
  Qu's fstests case.

  The "cleanup for later" has been promoted to a proper fix and wraps
  all uses of the stripe left shift so the diffstat has grown but leaves
  no potentially problematic uses.

  We should have done it that way before, sorry"

* tag 'for-6.4-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix remaining u32 overflows when left shifting stripe_nr

Pull block fix from Jens Axboe:
 "It's apparently the week of 'fixup something from last week', because
  the same is true for this block pull request.

  Fix up a lock grab that needs to be IRQ saving, rather than just IRQ
  disabling, in the block cgroup code"

* tag 'block-6.4-2023-06-23' of git://git.kernel.dk/linux:
  block: make sure local irq is disabled when calling __blkcg_rstat_flush

Pull iommu fix from Joerg Roedel:

 - Fix potential memory leak in AMD IOMMU domain allocation path

* tag 'iommu-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix possible memory leak of 'domain'

Pull sound fixes from Takashi Iwai:
 "Three oneliner fixes: one for a thinko in SOF SoundWire code and two
  HD-audio quirks for ASUS laptops. All device-specific and should be
  safe to apply"

* tag 'sound-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: Add quirk for ASUS ROG GV601V
  ALSA: hda/realtek: Add quirk for ASUS ROG G634Z
  ASoC: intel: sof_sdw: Fixup typo in device link checking

Pull gpio fixes from Bartosz Golaszewski:

 - fix IRQ initialization in gpiochip_irqchip_add_domain()

 - add a missing return value check for platform_get_irq() in
   gpio-sifive

 - don't free irq_domains which GPIOLIB does not manage

* tag 'gpio-fixes-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: Fix irq_domain resource tracking for gpiochip_irqchip_add_domain()
  gpio: sifive: add missing check for platform_get_irq
  gpiolib: Fix GPIO chip IRQ initialization restriction

Merge tag 'qcom-arm64-fixes-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

One last Qualcomm ARM64 DeviceTree fix for v6.4

Changes related to cache management for DMA memory caused WiFi to stop
work on SC7180 and SC7280 based products, using TF-A. These changes
marks the relevant device dma-coherent to correct the behavior.

* tag 'qcom-arm64-fixes-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: dts: qcom: sc7280: Mark SCM as dma-coherent for chrome devices
  arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for trogdor
  arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for IDP
  dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent

Link: https://lore.kernel.org/r/20230622203248.106422-1-andersson@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Dave Airlie reports that gcc-13.1.1 has started complaining about some
of the workqueue code in 32-bit arm builds:

  kernel/workqueue.c: In function ‘get_work_pwq’:
  kernel/workqueue.c:713:24: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
    713 |                 return (void *)(data & WORK_STRUCT_WQ_DATA_MASK);
        |                        ^
  [ ... a couple of other cases ... ]

and while it's not immediately clear exactly why gcc started complaining
about it now, I suspect it's some C23-induced enum type handlign fixup in
gcc-13 is the cause.

Whatever the reason for starting to complain, the code and data types
are indeed disgusting enough that the complaint is warranted.

The wq code ends up creating various "helper constants" (like that
WORK_STRUCT_WQ_DATA_MASK) using an enum type, which is all kinds of
confused.  The mask needs to be 'unsigned long', not some unspecified
enum type.

To make matters worse, the actual "mask and cast to a pointer" is
repeated a couple of times, and the cast isn't even always done to the
right pointer, but - as the error case above - to a 'void *' with then
the compiler finishing the job.

That's now how we roll in the kernel.

So create the masks using the proper types rather than some ambiguous
enumeration, and use a nice helper that actually does the type
conversion in one well-defined place.

Incidentally, this magically makes clang generate better code.  That,
admittedly, is really just a sign of clang having been seriously
confused before, and cleaning up the typing unconfuses the compiler too.
Reported-by: Dave Airlie <airlied@gmail.com>
Link: https://lore.kernel.org/lkml/CAPM=9twNnV4zMCvrPkw3H-ajZOH-01JVh_kDrxdPYQErz8ZTdA@mail.gmail.com/
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In order to prevent request_queue to be freed before cleaning up
blktrace debugfs entries, commit db59133e ("scsi: sg: fix blktrace
debugfs entries leakage") use scsi_device_get(), however,
scsi_device_get() will also grab scsi module reference and scsi module
can't be removed.

It's reported that blktests can't unload scsi_debug after block/001:

blktests (master) # ./check block
block/001 (stress device hotplugging) [failed]
     +++ /root/blktests/results/nodev/block/001.out.bad 2023-06-19
      Running block/001
      Stressing sd
     +modprobe: FATAL: Module scsi_debug is in use.

Fix this problem by grabbing request_queue reference directly, so that
scsi host module can still be unloaded while request_queue will be
pinged by sg device.
Reported-by: Chaitanya Kulkarni <chaitanyak@nvidia.com>
Link: https://lore.kernel.org/all/1760da91-876d-fc9c-ab51-999a6f66ad50@nvidia.com/
Fixes: db59133e ("scsi: sg: fix blktrace debugfs entries leakage")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230621160111.1433521-1-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

There is no reason not to use __io_cq_unlock_post_flush for intermediate
aux CQE flushing, all ->task_complete should apply there, i.e. if set it
should be the submitter task. Combine them, get rid of of
__io_cq_unlock_post() and rename the left function.

This place was also taking a couple percents of CPU according to
profiles for max throughput net benchmarks due to multishot recv
flooding it with completions.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/bbed60734cbec2e833d9c7bdcf9741aada5d8aab.1687518903.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

io_cq_unlock_post() is exclusively used in io_uring/io_uring.c, mark it
static and don't expose to other files.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3dc8127dda4514e1dd24bb32035faac887c5fa37.1687518903.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>