- 31 Jul, 2020 1 commit
-
-
Eric Dumazet authored
Mapping as little as 64GB can take more than 10 seconds, triggering issues on kernels with CONFIG_PREEMPT_NONE=y. ib_umem_get() already splits the work in 2MB units on x86_64, adding a cond_resched() in the long-lasting loop is enough to solve the issue. Note that sg_alloc_table() can still use more than 100 ms, which is also problematic. This might be addressed later in ib_umem_add_sg_table(), adding new blocks in sgl on demand. Link: https://lore.kernel.org/r/20200730015755.1827498-1-edumazet@google.comSigned-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com>
-
- 30 Jul, 2020 7 commits
-
-
Xi Wang authored
If the hns ROCEE reports a general error CQE (types not specified by the IB General Specifications), it's no need to change the QP state to error, and the driver should just skip it. Fixes: 7c044adc ("RDMA/hns: Simplify the cqe code of poll cq") Link: https://lore.kernel.org/r/1595932941-40613-8-git-send-email-liweihang@huawei.comSigned-off-by:
Xi Wang <wangxi11@huawei.com> Signed-off-by:
Weihang Li <liweihang@huawei.com> Signed-off-by:
-
Lang Cheng authored
One qp state migrations legal configuration was deleted mistakenly. Fixes: 357f3429 ("RDMA/hns: Simplify the state judgment code of qp") Link: https://lore.kernel.org/r/1595932941-40613-7-git-send-email-liweihang@huawei.comSigned-off-by:
Lang Cheng <chenglang@huawei.com> Signed-off-by:
-
Lang Cheng authored
The hns_roce_cmq_setup_basic_desc() can clear the whole desc, so removes these redundant memset operations. Link: https://lore.kernel.org/r/1595932941-40613-6-git-send-email-liweihang@huawei.comSigned-off-by:
-
Weihang Li authored
There are some functions called by set_rc_wqe() use two parameters: "void *wqe" and "struct hns_roce_v2_rc_send_wqe *rc_sq_wqe", but the first one can be got from the second one. So remove the redundant wqe from related functions. Link: https://lore.kernel.org/r/1595932941-40613-5-git-send-email-liweihang@huawei.comSigned-off-by:
-
Lang Cheng authored
HIP08_A is an temporary version and all features of it are supported by HIP08_B. So remove the relevant code. Link: https://lore.kernel.org/r/1595932941-40613-4-git-send-email-liweihang@huawei.comSigned-off-by:
Yangyang Li <liyangyang20@huawei.com> Signed-off-by:
-
Weihang Li authored
The parts about preparing and sending mailbox to hardware is not strongly related to other codes in hns_roce_v2_set_hem(), and can be encapsulated into a separate function. Link: https://lore.kernel.org/r/1595932941-40613-3-git-send-email-liweihang@huawei.comSigned-off-by:
-
Lang Cheng authored
HNS_ROCE_SQ_OPCODE_XXXs and HNS_ROCE_V2_WQE_OP_XXXs have same values, so remove a set of redundant definitions. In addition, remove the suffix of HNS_ROCE_V2_WQE_OP_BIND_MW_TYPE. Link: https://lore.kernel.org/r/1595932941-40613-2-git-send-email-liweihang@huawei.comSigned-off-by:
-
- 29 Jul, 2020 15 commits
-
-
Mark Zhang authored
When dumping QPs bound to a counter, raw QPs should be allowed to dump without the CAP_NET_RAW privilege. This is consistent with what "rdma res show qp" does. Fixes: c4ffee7c ("RDMA/netlink: Implement counter dumpit calback") Link: https://lore.kernel.org/r/20200727095828.496195-1-leon@kernel.orgSigned-off-by:
Mark Zhang <markz@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
The header files in RDMA subsystem are dual licensed and can be described by simple SPDX tag, so replace all of them at once together with making them use the same coding style for header guard defines. Link: https://lore.kernel.org/r/20200719072521.135260-1-leon@kernel.orgSigned-off-by:
-
Jack Wang authored
lockdep triggers a warning from time to time when running a regression test: rnbd_client L685: </dev/nullb0@bla> Device disconnected. rnbd_client L1756: Unloading module workqueue: WQ_MEM_RECLAIM rtrs_client_wq:rtrs_clt_reconnect_work [rtrs_client] is flushing !WQ_MEM_RECLAIM ib_addr:process_one_req [ib_core] WARNING: CPU: 2 PID: 18824 at kernel/workqueue.c:2517 check_flush_dependency+0xad/0x130 The root cause is workqueue core expect flushing should not be done for a !WQ_MEM_RECLAIM wq from a WQ_MEM_RECLAIM workqueue. In above case ib_addr workqueue without WQ_MEM_RECLAIM, but rtrs_wq WQ_MEM_RECLAIM. To avoid the warning, remove the WQ_MEM_RECLAIM flag. Fixes: 9cb83748 ("RDMA/rtrs: server: main functionality") Fixes: 6a98d71d ("RDMA/rtrs: client: main functionality") Link: https://lore.kernel.org/r/20200724111508.15734-4-haris.iqbal@cloud.ionos.comSigned-off-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
Md Haris Iqbal <haris.iqbal@cloud.ionos.com> Signed-off-by:
-
Danil Kipnis authored
In order to avoid all the clients to start reconnecting at the same time schedule the reconnect dwork with a random jitter of +[0,8] seconds. Fixes: 6a98d71d ("RDMA/rtrs: client: main functionality") Link: https://lore.kernel.org/r/20200724111508.15734-2-haris.iqbal@cloud.ionos.comSigned-off-by:
Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by:
-
Jason Gunthorpe authored
When a rdma_cm_id needs to be destroyed after a handler callback fails, part of the destruction pattern is open coded into each call site. Unfortunately the blind assignment to state discards important information needed to do cma_cancel_operation(). This results in active operations being left running after rdma_destroy_id() completes, and the use-after-free bugs from KASAN. Consolidate this entire pattern into destroy_id_handler_unlock() and manage the locking correctly. The state should be set to RDMA_CM_DESTROYING under the handler_lock to atomically ensure no futher handlers are called. Link: https://lore.kernel.org/r/20200723070707.1771101-5-leon@kernel.org Reported-by: syzbot+08092148130652a6faae@syzkaller.appspotmail.com Reported-by: syzbot+a929647172775e335941@syzkaller.appspotmail.com Signed-off-by:
-
Jason Gunthorpe authored
The REQ flows are concerned that once the handler is called on the new cm_id the ULP can choose to trigger a rdma_destroy_id() concurrently at any time. However, this is not true, while the ULP can call rdma_destroy_id(), it immediately blocks on the handler_mutex which prevents anything harmful from running concurrently. Remove the confusing extra locking and refcounts and make the handler_mutex protecting state during destroy more clear. Link: https://lore.kernel.org/r/20200723070707.1771101-4-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
Whenever an event is delivered to the handler it should be done under the handler_mutex and upon any non-zero return from the handler it should trigger destruction of the cm_id. cma_process_remove() skips some steps here, it is not necessarily wrong since the state change should prevent any races, but it is confusing and unnecessary. Follow the standard pattern here, with the slight twist that the transition to RDMA_CM_DEVICE_REMOVAL includes a cma_cancel_operation(). Link: https://lore.kernel.org/r/20200723070707.1771101-3-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
cma_process_remove() triggers an unconditional rdma_destroy_id() for internal_id's and skips the event deliver and transition through RDMA_CM_DEVICE_REMOVAL. This is confusing and unnecessary. internal_id always has cma_listen_handler() as the handler, have it catch the RDMA_CM_DEVICE_REMOVAL event and directly consume it and signal removal. This way the FSM sequence never skips the DEVICE_REMOVAL case and the logic in this hard to test area is simplified. Link: https://lore.kernel.org/r/20200723070707.1771101-2-leon@kernel.orgSigned-off-by:
-
Gal Pressman authored
Add support for 0xefa1 devices. Link: https://lore.kernel.org/r/20200722140312.3651-5-galpress@amazon.comReviewed-by:
Shadi Ammouri <sammouri@amazon.com> Reviewed-by:
Yossi Leybovich <sleybo@amazon.com> Signed-off-by:
Gal Pressman <galpress@amazon.com> Signed-off-by:
-
Gal Pressman authored
Introduce a mechanism that performs an handshake between the userspace provider and kernel driver which verifies that the user supports all required features in order to operate correctly. The handshake verifies the needed functionality by comparing the reported device caps and the provider caps. If the device reports a non-zero capability the appropriate comp mask is required from the userspace provider in order to allocate the context. Link: https://lore.kernel.org/r/20200722140312.3651-4-galpress@amazon.comReviewed-by:
-
Gal Pressman authored
The device reports the minimum SQ size required for creation. This patch queries the min SQ size and reports it back to the userspace library. Link: https://lore.kernel.org/r/20200722140312.3651-3-galpress@amazon.comReviewed-by:
Firas JahJah <firasj@amazon.com> Reviewed-by:
-
Gal Pressman authored
The device reports the maximum number of bytes to be written before ringing the doorbell (zero means unlimited). This patch queries the max batch size and reports it back to the userspace library. Link: https://lore.kernel.org/r/20200722140312.3651-2-galpress@amazon.comReviewed-by:
Daniel Kranzdorf <dkkranzd@amazon.com> Reviewed-by:
-
Yamin Friedman authored
Have the driver use shared CQs provided by the rdma core driver. This provides the advantage of improved efficiency handling interrupts. Link: https://lore.kernel.org/r/20200722135629.49467-3-maxg@mellanox.comSigned-off-by:
Yamin Friedman <yaminf@mellanox.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Yamin Friedman authored
Have the driver use shared CQs provided by the rdma core driver. Since this provides similar functionality to iser_comp it has been removed. Now there is no reason to allocate very large CQs when the driver is loaded while gaining the advantage of shared CQs. Previously when a single connection was opened a CQ was opened for every core with enough space for eight connections, this is a very large overhead that in most cases will not be utilized. Link: https://lore.kernel.org/r/20200722135629.49467-2-maxg@mellanox.comSigned-off-by:
-
Yamin Friedman authored
Have the driver use shared CQs provided by the rdma core driver. Since this provides similar functionality to iser_comp it has been removed. Now there is no reason to allocate very large CQs when the driver is loaded while gaining the advantage of shared CQs. Link: https://lore.kernel.org/r/20200722135629.49467-1-maxg@mellanox.comSigned-off-by:
-
- 28 Jul, 2020 1 commit
-
-
Leon Romanovsky authored
Delete two occurrences of unreachable code discovered by the Coverity. Link: https://lore.kernel.org/r/20200727095746.495915-1-leon@kernel.orgSigned-off-by:
-
- 27 Jul, 2020 4 commits
-
-
Li Heng authored
The error codes in _ib_modify_qp() are supposed to be negative errno. Fixes: 7a5c938b ("IB/core: Check for rdma_protocol_ib only after validating port_num") Link: https://lore.kernel.org/r/1595645787-20375-1-git-send-email-liheng40@huawei.comReported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Li Heng <liheng40@huawei.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Jason Gunthorpe authored
Meir Lichtinger says: ==================== ConnectX-7 supports setting relaxed ordering read/write mkey attribute by UMR, indicated by new HCA capabilities, so extend mlx5_ib driver to configure UMR control segment ==================== Based on the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux due to dependencies. * branch 'mlx5_uar': RDMA/mlx5: Set mkey relaxed ordering by UMR with ConnectX-7 RDMA/mlx5: Use MLX5_SET macro instead of local structure RDMA/mlx5: ConnectX-7 new capabilities to set relaxed ordering by UMR -
Meir Lichtinger authored
Up to ConnectX-7 UMR is not used when user passes relaxed ordering access flag. ConnectX-7 supports setting relaxed ordering read/write mkey attribute by UMR, indicated by new HCA capabilities. With ConnectX-7 driver uses UMR when user set relaxed ordering access flag, in contrast to previous silicon models. Specifically it includes setting relvant flags of mkey context mask in UMR control segment, and relaxed ordering write and read flags in UMR mkey context segment. Link: https://lore.kernel.org/r/20200716105248.1423452-4-leon@kernel.orgSigned-off-by:
Meir Lichtinger <meirl@mellanox.com> Reviewed-by:
Michael Guralnik <michaelgur@mellanox.com> Signed-off-by:
-
Meir Lichtinger authored
Use generic mlx5 structure defined in mlx5_ifc.h to represent ConnectX device data structures instead of using structure defined specifically for mlx5_ib module. Link: https://lore.kernel.org/r/20200716105248.1423452-3-leon@kernel.orgSigned-off-by:
-
- 24 Jul, 2020 9 commits
-
-
Pavel Machek authored
Nnothing uses the enum name, so this is harmless. Fixes: 32269441 ("IB/mlx5: Introduce driver create and destroy flow methods") Link: https://lore.kernel.org/r/20200724084112.GC31930@amdSigned-off-by:
Pavel Machek (CIP) <pavel@denx.de> Signed-off-by:
-
Gustavo A. R. Silva authored
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7-rc7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Link: https://lore.kernel.org/r/20200721133455.GA14363@embeddedorSigned-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Leon Romanovsky authored
Fix reported by kbuild warning. drivers/infiniband/core/uverbs_cmd.c:1897:47: warning: Shifting signed 32-bit value by 31 bits is undefined behaviour [shiftTooManyBitsSigned] BUILD_BUG_ON(IB_USER_LAST_QP_ATTR_MASK == (1 << 31)); ^ Link: https://lore.kernel.org/r/20200720175627.1273096-3-leon@kernel.orgReported-by:kernel test robot <lkp@intel.com> Signed-off-by:
-
Leon Romanovsky authored
The kbuild reported the following warning, so clean whole uverbs_cmd.c file. drivers/infiniband/core/uverbs_cmd.c:1066:6: warning: Variable 'ret' is reassigned a value before the old one has been used. [redundantAssignment] ret = uverbs_request(attrs, &cmd, sizeof(cmd)); ^ drivers/infiniband/core/uverbs_cmd.c:1064:0: note: Variable 'ret' is reassigned a value before the old one has been used. int ret = -EINVAL; ^ Link: https://lore.kernel.org/r/20200720175627.1273096-2-leon@kernel.orgReported-by: -
Maor Gottlieb authored
According to the locking scheme, mlx5_ib_update_xlt() should be called with srcu_read_lock(dev->odp->srcu). Prefetch missed this. This fixes the below WARN from lockdep_assert_held(): WARNING: CPU: 1 PID: 1130 at drivers/infiniband/hw/mlx5/odp.c:132 mlx5_odp_populate_xlt+0x175/0x180 [mlx5_ib] Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter overlay ib_srp scsi_transport_srp rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core mlx5_core mlxfw ptp pps_core CPU: 1 PID: 1130 Comm: kworker/u16:11 Tainted: G W 5.8.0-rc5_for_upstream_debug_2020_07_13_11_04 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events_unbound mlx5_ib_prefetch_mr_work [mlx5_ib] RIP: 0010:mlx5_odp_populate_xlt+0x175/0x180 [mlx5_ib] Code: 08 e2 85 c0 0f 84 65 ff ff ff 49 8b 87 60 01 00 00 be ff ff ff ff 48 8d b8 b0 39 00 00 e8 93 e0 50 e1 85 c0 0f 85 45 ff ff ff <0f> 0b e9 3e ff ff ff 0f 0b eb c7 0f 1f 44 00 00 48 8b 87 98 0f 00 RSP: 0018:ffff88840f44fc68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88840cc9d000 RCX: ffff88840efcd940 RDX: 0000000000000000 RSI: ffff88844871b9b0 RDI: ffff88840efce100 RBP: ffff88840cc9d040 R08: 0000000000000040 R09: 0000000000000001 R10: ffff88846ced3068 R11: 0000000000000000 R12: 00000000000156ec R13: 0000000000000004 R14: 0000000000000004 R15: ffff888439941000 FS: 0000000000000000(0000) GS:ffff88846fa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8536d12430 CR3: 0000000437a5e006 CR4: 0000000000360ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5_ib_update_xlt+0x37c/0x7c0 [mlx5_ib] pagefault_mr+0x315/0x440 [mlx5_ib] mlx5_ib_prefetch_mr_work+0x56/0xa0 [mlx5_ib] process_one_work+0x215/0x5c0 worker_thread+0x3c/0x380 ? process_one_work+0x5c0/0x5c0 kthread+0x133/0x150 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 Hold the SRCU during prefetch, even though it strictly isn't needed since prefetch is holding the num_deferred_work it does make it easier to reason about. Fixes: 5256edcb ("RDMA/mlx5: Rework implicit ODP destroy") Link: https://lore.kernel.org/r/20200719065747.131157-1-leon@kernel.orgSigned-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
-
Meir Lichtinger authored
Up to ConnectX-7 setting mkey relaxed ordering read/write attributes by UMR is not supported. ConnectX-7 supports this option, which is indicated by two new HCA capabilities - relaxed_ordering_write_umr and relaxed_ordering_read_umr. Signed-off-by:
-
Leon Romanovsky authored
The automatic object lifetime model allows us to change the write() interface to have the same logic as the ioctl() path. Update the create/alloc functions to be in the following format, so the code flow will be the same: * Allocate objects * Initialize them * Call to the drivers, this is last step that is allowed to fail * Finalize object * Return response and allow to core code to handle abort/commit respectively. Link: https://lore.kernel.org/r/20200719052223.75245-3-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
Create the same logic flow for the write() interface as we have for the ioctl() path by making sure that the object is committed or aborted automatically after HW object creation. Link: https://lore.kernel.org/r/20200719052223.75245-2-leon@kernel.orgSigned-off-by:
-
Maor Gottlieb authored
Currently the SQ is set to a ready state when the RAW QP is modified to INIT. When the TIS is modified, e.g. to change the lag_tx_affinity, then SQs which are already in the ready state will not be affected. Open a window to modify the SQ behavior by setting the SQ as ready only when QP was modified to RTS. Link: https://lore.kernel.org/r/20200716105416.1423826-1-leon@kernel.orgSigned-off-by:
-
- 20 Jul, 2020 3 commits
-
-
Randy Dunlap authored
Change the repeated word "it" in a comment to "it to". Also insert a dash in the sentence to add clarity. Link: https://lore.kernel.org/r/20200719003220.21250-1-rdunlap@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Devesh Sharma authored
Adding a new co-maintainer for Broadcom's RDMA driver. Link: https://lore.kernel.org/r/1594822619-4098-7-git-send-email-devesh.sharma@broadcom.comSigned-off-by:
Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by:
-
Devesh Sharma authored
Modifying the post-send and post-recv to initialize the wqes slot by slot dynamically depending on the number of max sges requested by consumer at the time of QP creation. Changed the QP creation logic to determine the size of SQ and RQ in 16B slots based on the number of wqe and number of SGEs requested by consumer Link: https://lore.kernel.org/r/1594822619-4098-6-git-send-email-devesh.sharma@broadcom.comSigned-off-by:
-
