- 08 Nov, 2013 5 commits
-
-
Stefano Stabellini authored
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Stefano Stabellini authored
IOMMU_HELPER is needed because SWIOTLB calls iommu_is_span_boundary, provided by lib/iommu_helper.c. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: will.deacon@arm.com Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Changes in v9: - remove uneeded include asm/cacheflush.h; - just return 0 if !dev->dma_mask in dma_capable. Changes in v8: - use __phys_to_pfn and __pfn_to_phys. Changes in v7: - dma_mark_clean: empty implementation; - in dma_capable use coherent_dma_mask if dma_mask hasn't been allocated. Changes in v6: - check for dev->dma_mask being NULL in dma_capable. Changes in v5: - implement dma_mark_clean using dmac_flush_range. Changes in v3: - dma_capable: do not treat dma_mask as a limit; - remove SWIOTLB dependency on NEED_SG_DMA_LENGTH.
-
Paul Gortmaker authored
commit 6efa20e4 ("xen: Support 64-bit PV guest receiving NMIs") and commit cd9151e2 ( "xen/balloon: set a mapping for ballooned out pages") added new instances of __cpuinit usage. We removed this a couple versions ago; we now want to remove the compat no-op stubs. Introducing new users is not what we want to see at this point in time, as it will break once the stubs are gone. Cc: Konrad Rzeszutek Wilk <konrad@kernel.org> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Boris Ostrovsky authored
Currently balloon's initial value is set to max_pfn which includes non-RAM ranges such as MMIO hole. As result, initial memory target (specified by guest's configuration file) will appear smaller than what balloon driver perceives to be the current number of available pages. Thus it will balloon down "extra" pages, decreasing amount of available memory for no good reason. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Konrad Rzeszutek Wilk authored
The PCI MMCONFIG area is usually reserved via the E820 so the Xen hypervisor is aware of these regions. But they can also be enumerated in the ACPI DSDT which means the hypervisor won't know of them until the initial domain informs it of via PHYSDEVOP_pci_mmcfg_reserved. This is what this patch does for all of the MCFG regions that the initial domain is aware of (E820 enumerated and ACPI). Reported-by: Santosh Jodh <Santosh.Jodh@citrix.com> CC: Jan Beulich <JBeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> CC: David Vrabel <david.vrabel@citrix.com> CC: Mukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v1: Redid it a bit] [v2: Dropped the P2M 1-1 setting] [v3: Check for Xen in-case we are running under baremetal] [v4: Wrap with CONFIG_PCI_MMCONFIG]
-
- 06 Nov, 2013 2 commits
-
-
Michael Opdenacker authored
This patch proposes to remove the IRQF_DISABLED flag from drivers/xen code. It's a NOOP since 2.6.35 and it will be removed one day. Note that architecture dependent fixes for IRQF_DISABLED were already submitted through separate patches. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Michael Opdenacker authored
This patch proposes to remove the IRQF_DISABLED flag from x86/xen code. It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 24 Oct, 2013 1 commit
-
-
Thierry Reding authored
Tracepoints are only created when Xen support is enabled, but they are also referenced within lib/swiotlb.c. So unless Xen support is enabled the tracepoints will be missing, therefore causing builds to fail. Fix this by moving the tracepoint creation to lib/swiotlb.c, which works nicely because the Xen swiotlb support selects the generic swiotlb support. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 02 Oct, 2013 1 commit
-
-
Zoltan Kiss authored
Ftrace is currently not able to detect when SWIOTLB has to do double buffering. Under Xen you can only see it indirectly in function_graph, when xen_swiotlb_map_page() doesn't stop after range_straddles_page_boundary(), but calls spinlock functions, memcpy() and xen_phys_to_bus() as well. This patch introduces the swiotlb:swiotlb_bounced event, which also prints out the following informations to help you find out why bouncing happened: dev_name: 0000:08:00.0 dma_mask=ffffffffffffffff dev_addr=9149f000 size=32768 swiotlb_force=0 If you use Xen, and (dev_addr + size + 1) > dma_mask, the buffer is out of the device's DMA range. If swiotlb_force == 1, you should really change the kernel parameters. Otherwise, the buffer is not contiguous in mfn space. Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> [v1: Don't print 'swiotlb_force=X', just print swiotlb_force if it is enabled] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 30 Sep, 2013 1 commit
-
-
Konrad Rzeszutek Wilk authored
The xen_raw_printk works great for debugging purposes. We use for PV guests and we can also use it for HVM guests. However, for HVM guests we have a fallback of using the 0xe9 port in case the hypervisor does not support an HVM guest of using the console_io hypercall. As such lets use 0xe9 during early bootup, and once the hyper-page is setup and if the console_io hypercall is supported - use that. Otherwise we will fallback to using the 0xe9 after early bootup. We also alter the return value for dom0_write_console to return an error value instead of zero. The HVC API has been supporting returning error values for quite some time. P.S. To use (and to see the output in the Xen ring buffer) one has to build the hypervisor with 'debug=y'. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v1: ifdef xen_cpuid_base as it is X86 specific]
-
- 27 Sep, 2013 1 commit
-
-
Konrad Rzeszutek Wilk authored
Jan Beulich spotted that the PAT MSR settings in the Xen public document that "the first (PAT6) column was wrong across the board, and the column for PAT7 was missing altogether." This updates it to be in sync. CC: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Jan Beulich <jbeulich@suse.com>
-
- 25 Sep, 2013 29 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull Xen fixes from Konrad Rzeszutek Wilk: "Bug-fixes and one update to the kernel-paramters.txt documentation. - Fix PV spinlocks triggering jump_label code bug - Remove extraneous code in the tpm front driver - Fix ballooning out of pages when non-preemptible - Fix deadlock when using a 32-bit initial domain with large amount of memory - Add xen_nopvpsin parameter to the documentation" * tag 'stable/for-linus-3.12-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/spinlock: Document the xen_nopvspin parameter. xen/p2m: check MFN is in range before using the m2p table xen/balloon: don't alloc page while non-preemptible xen: Do not enable spinlocks before jump_label_init() has executed tpm: xen-tpmfront: Remove the locality sysfs attribute tpm: xen-tpmfront: Fix default durations
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device-mapper fixes from Mike Snitzer: "A few fixes for dm-snapshot, a 32 bit fix for dm-stats, a couple error handling fixes for dm-multipath. A fix for the thin provisioning target to not expose non-zero discard limits if discards are disabled. Lastly, add two DM module parameters which allow users to tune the emergency memory reserves that DM mainatins per device -- this helps fix a long-standing issue for dm-multipath. The conservative default reserve for request-based dm-multipath devices (256) has proven problematic for users with many multipathed SCSI devices but relatively little memory. To responsibly select a smaller value users should use the new nr_bios tracepoint info (via commit 75afb352 "block: Add nr_bios to block_rq_remap tracepoint") to determine the peak number of bios their workloads create" * tag 'dm-3.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: add reserved_bio_based_ios module parameter dm: add reserved_rq_based_ios module parameter dm: lower bio-based mempool reservation dm thin: do not expose non-zero discard limits if discards disabled dm mpath: disable WRITE SAME if it fails dm-snapshot: fix performance degradation due to small hash size dm snapshot: workaround for a false positive lockdep warning dm stats: fix possible counter corruption on 32-bit systems dm mpath: do not fail path on -ENOSPC
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: - Fix a comment - A small cleanup the main purpose of which is to work around an internal compiler error bug in certain Codesource toolchains. * git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: mm: Move some checks out of 'for' loop in DMA operations MIPS: cpu-features.h: s/MIPS53/MIPS64/
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc fixes from Ben Herrenschmidt: "Here are a few things for -rc2, this time it's all written by me so it can only be perfect .... right ? :) So we have the fix to call irq_enter/exit on the irq stack we've been discussing, plus a cleanup on top to remove an unused (and broken) stack limit tracking feature (well, make it 32-bit only in fact where it is used and works properly). Then we have two things that I wrote over the last couple of days and made the executive decision to include just because I can (and I'm sure you won't object .... right ?). They fix a couple of annoying and long standing "issues": - We had separate zImages for when booting via Open Firmware vs. booting via a flat device-tree, while it's trivial to make one that deals with both - We wasted a ton of cycles spinning secondary CPUs uselessly at boot instead of starting them when needed on pseries, thus contributing significantly to global warming" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pseries: Do not start secondaries in Open Firmware powerpc/zImage: make the "OF" wrapper support ePAPR boot powerpc: Remove ksp_limit on ppc64 powerpc/irq: Run softirqs off the top of the irq stack
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "An EFI fix and two reboot-quirk fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/reboot: Fix apparent cut-n-paste mistake in Dell reboot workaround x86/reboot: Add quirk to make Dell C6100 use reboot=pci automatically x86, efi: Don't map Boot Services on i386
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Three small fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/balancing: Fix cfs_rq->task_h_load calculation sched/balancing: Fix 'local->avg_load > busiest->avg_load' case in fix_small_imbalance() sched/balancing: Fix 'local->avg_load > sds->avg_load' case in calculate_imbalance()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Assorted standalone fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Add model number for Avoton Silvermont perf: Fix capabilities bitfield compatibility in 'struct perf_event_mmap_page' perf/x86/intel/uncore: Don't use smp_processor_id() in validate_group() perf: Update ABI comment tools lib lk: Uninclude linux/magic.h in debugfs.c perf tools: Fix old GCC build error in trace-event-parse.c:parse_proc_kallsyms() perf probe: Fix finder to find lines of given function perf session: Check for SIGINT in more loops perf tools: Fix compile with libelf without get_phdrnum perf tools: Fix buildid cache handling of kallsyms with kcore perf annotate: Fix objdump line parsing offset validation perf tools: Fill in new definitions for madvise()/mmap() flags perf tools: Sharpen the libaudit dependencies test
-
Mikael Pettersson authored
My old @it.uu.se email address is going away, so update relevant files to point to my @gmail.com address instead. In sata_promise.c just delete the address, people can get it from MAINTAINERS. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jayachandran C authored
The check cpu_needs_post_dma_flush() in mips_dma_sync_sg_for_cpu() and the check !plat_device_is_coherent() in mips_dma_sync_sg_for_device() can be moved outside the for loop. As a side effect, this also avoids a GCC bug that caused kernel compile to fail with the error: arch/mips/mm/dma-default.c: In function 'mips_dma_sync_sg_for_cpu': arch/mips/mm/dma-default.c:316:1: internal compiler error: in add_insn_before, at emit-rtl.c:3852 This gcc failure is seen in Code Sourcery toolchains [e.g. gcc version 4.7.2 (Sourcery CodeBench Lite 2012.09-99)] after commit "MIPS: Optimize current_cpu_type() for better code." Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5907/Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Tested-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Konrad Rzeszutek Wilk authored
Which disables in the ticketlock slowpath the Xen PV optimization's. Useful for diagnosing issues and comparing benchmarks in over-commit CPU scenarios. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
David Vrabel authored
On hosts with more than 168 GB of memory, a 32-bit guest may attempt to grant map an MFN that is error cannot lookup in its mapping of the m2p table. There is an m2p lookup as part of m2p_add_override() and m2p_remove_override(). The lookup falls off the end of the mapped portion of the m2p and (because the mapping is at the highest virtual address) wraps around and the lookup causes a fault on what appears to be a user space address. do_page_fault() (thinking it's a fault to a userspace address), tries to lock mm->mmap_sem. If the gntdev device is used for the grant map, m2p_add_override() is called from from gnttab_mmap() with mm->mmap_sem already locked. do_page_fault() then deadlocks. The deadlock would most commonly occur when a 64-bit guest is started and xenconsoled attempts to grant map its console ring. Introduce mfn_to_pfn_no_overrides() which checks the MFN is within the mapped portion of the m2p table before accessing the table and use this in m2p_add_override(), m2p_remove_override(), and mfn_to_pfn() (which already had the correct range check). All faults caused by accessing the non-existant parts of the m2p are thus within the kernel address space and exception_fixup() is called without trying to lock mm->mmap_sem. This means that for MFNs that are outside the mapped range of the m2p then mfn_to_pfn() will always look in the m2p overrides. This is correct because it must be a foreign MFN (and the PFN in the m2p in this case is only relevant for the other domain). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Stefano Stabellini <stefano.stabellini@citrix.com> Cc: Jan Beulich <JBeulich@suse.com> -- v3: check for auto_translated_physmap in mfn_to_pfn_no_overrides() v2: in mfn_to_pfn() look in m2p_overrides if the MFN is out of range as it's probably foreign. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
-
Dave Jones authored
This seems to have been copied from the Optiplex 990 entry above, but somoene forgot to change the ident text. Signed-off-by: Dave Jones <davej@fedoraproject.org> Link: http://lkml.kernel.org/r/20130925001344.GA13554@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
Benjamin Herrenschmidt authored
Starting secondary CPUs early on from Open Firmware and placing them in a holding spin loop slows down the boot process significantly under some hypervisors such as KVM. This is also unnecessary when RTAS supports querying the CPU state So let's not do it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
This makes the "OF" zImage wrapper (zImage.pseries, zImage.pmac, zImage.maple) work if booted via a flat device-tree (ePAPR boot mode), and thus potentially usable with kexec. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
We've been keeping that field in thread_struct for a while, it contains the "limit" of the current stack pointer and is meant to be used for detecting stack overflows. It has a few problems however: - First, it was never actually *used* on 64-bit. Set and updated but not actually exploited - When switching stack to/from irq and softirq stacks, it's update is racy unless we hard disable interrupts, which is costly. This is fine on 32-bit as we don't soft-disable there but not on 64-bit. Thus rather than fixing 2 in order to implement 1 in some hypothetical future, let's remove the code completely from 64-bit. In order to avoid a clutter of ifdef's, we remove the updates from C code completely during interrupt stack switching, and instead maintain it from the asm helper that is used to do the stack switching in the first place. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
Nowadays, irq_exit() calls __do_softirq() pretty much directly instead of calling do_softirq() which switches to the decicated softirq stack. This has lead to observed stack overflows on powerpc since we call irq_enter() and irq_exit() outside of the scope that switches to the irq stack. This fixes it by moving the stack switching up a level, making irq_enter() and irq_exit() run off the irq stack. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Paul E. McKenney authored
There is a loop in do_mlockall() that lacks a preemption point, which means that the following can happen on non-preemptible builds of the kernel. Dave Jones reports: "My fuzz tester keeps hitting this. Every instance shows the non-irq stack came in from mlockall. I'm only seeing this on one box, but that has more ram (8gb) than my other machines, which might explain it. INFO: rcu_preempt self-detected stall on CPU { 3} (t=6500 jiffies g=470344 c=470343 q=0) sending NMI to all CPUs: NMI backtrace for cpu 3 CPU: 3 PID: 29664 Comm: trinity-child2 Not tainted 3.11.0-rc1+ #32 Call Trace: lru_add_drain_all+0x15/0x20 SyS_mlockall+0xa5/0x1a0 tracesys+0xdd/0xe2" This commit addresses this problem by inserting the required preemption point. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Michel Lespinasse <walken@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "Bunch of fixes. And a reversion of mhocko's "Soft limit rework" patch series. This is actually your fault for opening the merge window when I was off racing ;) I didn't read the email thread before sending everything off. Johannes Weiner raised significant issues: http://www.spinics.net/lists/cgroups/msg08813.html and we agreed to back it all out" I clearly need to be more aware of Andrew's racing schedule. * akpm: MAINTAINERS: update mach-bcm related email address checkpatch: make extern in .h prototypes quieter cciss: fix info leak in cciss_ioctl32_passthru() cpqarray: fix info leak in ida_locked_ioctl() kernel/reboot.c: re-enable the function of variable reboot_default audit: fix endless wait in audit_log_start() revert "memcg, vmscan: integrate soft reclaim tighter with zone shrinking code" revert "memcg: get rid of soft-limit tree infrastructure" revert "vmscan, memcg: do softlimit reclaim also for targeted reclaim" revert "memcg: enhance memcg iterator to support predicates" revert "memcg: track children in soft limit excess to improve soft limit" revert "memcg, vmscan: do not attempt soft limit reclaim if it would not scan anything" revert "memcg: track all children over limit in the root" revert "memcg, vmscan: do not fall into reclaim-all pass too quickly" fs/ocfs2/super.c: use a bigger nodestr in ocfs2_dismount_volume watchdog: update watchdog_thresh properly watchdog: update watchdog attributes atomically
-
Christian Daudt authored
Update email address on mach-bcm + drivers for Broadcom mobile SoCs. Signed-off-by: Christian Daudt <csd@broadcom.com> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
The use of extern in .h files is a bit contentious. Make the warning be emitted only when --strict is used on the command line. Signed-off-by: Joe Perches <joe@perches.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Carpenter authored
The arg64 struct has a hole after ->buf_size which isn't cleared. Or if any of the calls to copy_from_user() fail then that would cause an information leak as well. This was assigned CVE-2013-2147. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Carpenter authored
The pciinfo struct has a two byte hole after ->dev_fn so stack information could be leaked to the user. This was assigned CVE-2013-2147. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Chuansheng Liu authored
Commit 1b3a5d02 ("reboot: move arch/x86 reboot= handling to generic kernel") did some cleanup for reboot= command line, but it made the reboot_default inoperative. The default value of variable reboot_default should be 1, and if command line reboot= is not set, system will use the default reboot mode. [akpm@linux-foundation.org: fix comment layout] Signed-off-by: Li Fei <fei.li@intel.com> Signed-off-by: liu chuansheng <chuansheng.liu@intel.com> Acked-by: Robin Holt <robinmholt@linux.com> Cc: <stable@vger.kernel.org> [3.11.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Konstantin Khlebnikov authored
After commit 82919919 ("kernel/audit.c: avoid negative sleep durations") audit emitters will block forever if userspace daemon cannot handle backlog. After the timeout the waiting loop turns into busy loop and runs until daemon dies or returns back to work. This is a minimal patch for that bug. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Richard Guy Briggs <rgb@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: Chuck Anderson <chuck.anderson@oracle.com> Cc: Dan Duval <dan.duval@oracle.com> Cc: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
Revert commit 3b38722e ("memcg, vmscan: integrate soft reclaim tighter with zone shrinking code") I merged this prematurely - Michal and Johannes still disagree about the overall design direction and the future remains unclear. Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
Revert commit e883110a ("memcg: get rid of soft-limit tree infrastructure") I merged this prematurely - Michal and Johannes still disagree about the overall design direction and the future remains unclear. Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
Revert commit a5b7c87f ("vmscan, memcg: do softlimit reclaim also for targeted reclaim") I merged this prematurely - Michal and Johannes still disagree about the overall design direction and the future remains unclear. Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
Revert commit de57780d ("memcg: enhance memcg iterator to support predicates") I merged this prematurely - Michal and Johannes still disagree about the overall design direction and the future remains unclear. Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
Revert commit 7d910c05 ("memcg: track children in soft limit excess to improve soft limit") I merged this prematurely - Michal and Johannes still disagree about the overall design direction and the future remains unclear. Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-