1. 15 Jul, 2017 5 commits
  2. 05 Jul, 2017 35 commits
    • Greg Kroah-Hartman's avatar
      Linux 3.18.60 · 8686d7d2
      Greg Kroah-Hartman authored
      8686d7d2
    • Wanpeng Li's avatar
      KVM: nVMX: Fix exception injection · 240b7315
      Wanpeng Li authored
      commit d4912215 upstream.
      
       WARNING: CPU: 3 PID: 2840 at arch/x86/kvm/vmx.c:10966 nested_vmx_vmexit+0xdcd/0xde0 [kvm_intel]
       CPU: 3 PID: 2840 Comm: qemu-system-x86 Tainted: G           OE   4.12.0-rc3+ #23
       RIP: 0010:nested_vmx_vmexit+0xdcd/0xde0 [kvm_intel]
       Call Trace:
        ? kvm_check_async_pf_completion+0xef/0x120 [kvm]
        ? rcu_read_lock_sched_held+0x79/0x80
        vmx_queue_exception+0x104/0x160 [kvm_intel]
        ? vmx_queue_exception+0x104/0x160 [kvm_intel]
        kvm_arch_vcpu_ioctl_run+0x1171/0x1ce0 [kvm]
        ? kvm_arch_vcpu_load+0x47/0x240 [kvm]
        ? kvm_arch_vcpu_load+0x62/0x240 [kvm]
        kvm_vcpu_ioctl+0x384/0x7b0 [kvm]
        ? kvm_vcpu_ioctl+0x384/0x7b0 [kvm]
        ? __fget+0xf3/0x210
        do_vfs_ioctl+0xa4/0x700
        ? __fget+0x114/0x210
        SyS_ioctl+0x79/0x90
        do_syscall_64+0x81/0x220
        entry_SYSCALL64_slow_path+0x25/0x25
      
      This is triggered occasionally by running both win7 and win2016 in L2, in
      addition, EPT is disabled on both L1 and L2. It can't be reproduced easily.
      
      Commit 0b6ac343 (KVM: nVMX: Correct handling of exception injection) mentioned
      that "KVM wants to inject page-faults which it got to the guest. This function
      assumes it is called with the exit reason in vmcs02 being a #PF exception".
      Commit e011c663 (KVM: nVMX: Check all exceptions for intercept during delivery to
      L2) allows to check all exceptions for intercept during delivery to L2. However,
      there is no guarantee the exit reason is exception currently, when there is an
      external interrupt occurred on host, maybe a time interrupt for host which should
      not be injected to guest, and somewhere queues an exception, then the function
      nested_vmx_check_exception() will be called and the vmexit emulation codes will
      try to emulate the "Acknowledge interrupt on exit" behavior, the warning is
      triggered.
      
      Reusing the exit reason from the L2->L0 vmexit is wrong in this case,
      the reason must always be EXCEPTION_NMI when injecting an exception into
      L1 as a nested vmexit.
      
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Radim Krčmář <rkrcmar@redhat.com>
      Signed-off-by: default avatarWanpeng Li <wanpeng.li@hotmail.com>
      Fixes: e011c663 ("KVM: nVMX: Check all exceptions for intercept during delivery to L2")
      Signed-off-by: default avatarRadim Krčmář <rkrcmar@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      240b7315
    • Radim Krčmář's avatar
      KVM: x86: zero base3 of unusable segments · 42ba428e
      Radim Krčmář authored
      commit f0367ee1 upstream.
      
      Static checker noticed that base3 could be used uninitialized if the
      segment was not present (useable).  Random stack values probably would
      not pass VMCS entry checks.
      Reported-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Fixes: 1aa36616 ("KVM: x86 emulator: consolidate segment accessors")
      Reviewed-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      Reviewed-by: default avatarDavid Hildenbrand <david@redhat.com>
      Signed-off-by: default avatarRadim Krčmář <rkrcmar@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      42ba428e
    • Dan Carpenter's avatar
      cpufreq: s3c2416: double free on driver init error path · c40956d9
      Dan Carpenter authored
      commit a69261e4 upstream.
      
      The "goto err_armclk;" error path already does a clk_put(s3c_freq->hclk);
      so this is a double free.
      
      Fixes: 34ee5507 ([CPUFREQ] Add S3C2416/S3C2450 cpufreq driver)
      Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Reviewed-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
      Acked-by: default avatarViresh Kumar <viresh.kumar@linaro.org>
      Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c40956d9
    • Pan Bian's avatar
      iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid() · fbb7b439
      Pan Bian authored
      commit 73dbd4a4 upstream.
      
      In function amd_iommu_bind_pasid(), the control flow jumps
      to label out_free when pasid_state->mm and mm is NULL. And
      mmput(mm) is called.  In function mmput(mm), mm is
      referenced without validation. This will result in a NULL
      dereference bug. This patch fixes the bug.
      Signed-off-by: default avatarPan Bian <bianpan2016@163.com>
      Fixes: f0aac63b ('iommu/amd: Don't hold a reference to mm_struct')
      Signed-off-by: default avatarJoerg Roedel <jroedel@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      fbb7b439
    • David Dillow's avatar
      iommu/vt-d: Don't over-free page table directories · cfeac3d9
      David Dillow authored
      commit f7116e11 upstream.
      
      dma_pte_free_level() recurses down the IOMMU page tables and frees
      directory pages that are entirely contained in the given PFN range.
      Unfortunately, it incorrectly calculates the starting address covered
      by the PTE under consideration, which can lead to it clearing an entry
      that is still in use.
      
      This occurs if we have a scatterlist with an entry that has a length
      greater than 1026 MB and is aligned to 2 MB for both the IOMMU and
      physical addresses. For example, if __domain_mapping() is asked to map a
      two-entry scatterlist with 2 MB and 1028 MB segments to PFN 0xffff80000,
      it will ask if dma_pte_free_pagetable() is asked to PFNs from
      0xffff80200 to 0xffffc05ff, it will also incorrectly clear the PFNs from
      0xffff80000 to 0xffff801ff because of this issue. The current code will
      set level_pfn to 0xffff80200, and 0xffff80200-0xffffc01ff fits inside
      the range being cleared. Properly setting the level_pfn for the current
      level under consideration catches that this PTE is outside of the range
      being cleared.
      
      This patch also changes the value passed into dma_pte_free_level() when
      it recurses. This only affects the first PTE of the range being cleared,
      and is handled by the existing code that ensures we start our cursor no
      lower than start_pfn.
      
      This was found when using dma_map_sg() to map large chunks of contiguous
      memory, which immediatedly led to faults on the first access of the
      erroneously-deleted mappings.
      
      Fixes: 3269ee0b ("intel-iommu: Fix leaks in pagetable freeing")
      Reviewed-by: default avatarBenjamin Serebrin <serebrin@google.com>
      Signed-off-by: default avatarDavid Dillow <dillow@google.com>
      Signed-off-by: default avatarJoerg Roedel <jroedel@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      cfeac3d9
    • Doug Berger's avatar
      ARM: 8685/1: ensure memblock-limit is pmd-aligned · d48ed806
      Doug Berger authored
      commit 9e25ebfe upstream.
      
      The pmd containing memblock_limit is cleared by prepare_page_table()
      which creates the opportunity for early_alloc() to allocate unmapped
      memory if memblock_limit is not pmd aligned causing a boot-time hang.
      
      Commit 965278dc ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM")
      attempted to resolve this problem, but there is a path through the
      adjust_lowmem_bounds() routine where if all memory regions start and
      end on pmd-aligned addresses the memblock_limit will be set to
      arm_lowmem_limit.
      
      Since arm_lowmem_limit can be affected by the vmalloc early parameter,
      the value of arm_lowmem_limit may not be pmd-aligned. This commit
      corrects this oversight such that memblock_limit is always rounded
      down to pmd-alignment.
      
      Fixes: 965278dc ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM")
      Signed-off-by: default avatarDoug Berger <opendmb@gmail.com>
      Suggested-by: default avatarMark Rutland <mark.rutland@arm.com>
      Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d48ed806
    • Eric Anholt's avatar
      watchdog: bcm281xx: Fix use of uninitialized spinlock. · 6ca017cb
      Eric Anholt authored
      commit fedf266f upstream.
      
      The bcm_kona_wdt_set_resolution_reg() call takes the spinlock, so
      initialize it earlier.  Fixes a warning at boot with lock debugging
      enabled.
      
      Fixes: 6adb730d ("watchdog: bcm281xx: Watchdog Driver")
      Signed-off-by: default avatarEric Anholt <eric@anholt.net>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Reviewed-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarWim Van Sebroeck <wim@iguana.be>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6ca017cb
    • Dan Carpenter's avatar
      xfrm: Oops on error in pfkey_msg2xfrm_state() · 3c0454cc
      Dan Carpenter authored
      commit 1e3d0c2c upstream.
      
      There are some missing error codes here so we accidentally return NULL
      instead of an error pointer.  It results in a NULL pointer dereference.
      
      Fixes: df71837d ("[LSM-IPSec]: Security association restriction.")
      Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarSteffen Klassert <steffen.klassert@secunet.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3c0454cc
    • Dan Carpenter's avatar
      xfrm: NULL dereference on allocation failure · f790a777
      Dan Carpenter authored
      commit e747f643 upstream.
      
      The default error code in pfkey_msg2xfrm_state() is -ENOBUFS.  We
      added a new call to security_xfrm_state_alloc() which sets "err" to zero
      so there several places where we can return ERR_PTR(0) if kmalloc()
      fails.  The caller is expecting error pointers so it leads to a NULL
      dereference.
      
      Fixes: df71837d ("[LSM-IPSec]: Security association restriction.")
      Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarSteffen Klassert <steffen.klassert@secunet.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f790a777
    • Sabrina Dubroca's avatar
      xfrm: fix stack access out of bounds with CONFIG_XFRM_SUB_POLICY · dd5d0625
      Sabrina Dubroca authored
      commit 9b3eb541 upstream.
      
      When CONFIG_XFRM_SUB_POLICY=y, xfrm_dst stores a copy of the flowi for
      that dst. Unfortunately, the code that allocates and fills this copy
      doesn't care about what type of flowi (flowi, flowi4, flowi6) gets
      passed. In multiple code paths (from raw_sendmsg, from TCP when
      replying to a FIN, in vxlan, geneve, and gre), the flowi that gets
      passed to xfrm is actually an on-stack flowi4, so we end up reading
      stuff from the stack past the end of the flowi4 struct.
      
      Since xfrm_dst->origin isn't used anywhere following commit
      ca116922 ("xfrm: Eliminate "fl" and "pol" args to
      xfrm_bundle_ok()."), just get rid of it.  xfrm_dst->partner isn't used
      either, so get rid of that too.
      
      Fixes: 9d6ec938 ("ipv4: Use flowi4 in public route lookup interfaces.")
      Signed-off-by: default avatarSabrina Dubroca <sd@queasysnail.net>
      Signed-off-by: default avatarSteffen Klassert <steffen.klassert@secunet.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      dd5d0625
    • Rafał Miłecki's avatar
      mtd: bcm47xxpart: limit scanned flash area on BCM47XX (MIPS) only · 2288ba07
      Rafał Miłecki authored
      commit 2a36a5c3 upstream.
      
      We allowed using bcm47xxpart on BCM5301X arch with commit:
      9e3afa5f ("mtd: bcm47xxpart: allow enabling on ARCH_BCM_5301X")
      
      BCM5301X devices may contain some partitions in higher memory, e.g.
      Netgear R8000 has board_data at 0x2600000. To detect them we should
      use size limit on MIPS only.
      Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
      Signed-off-by: default avatarBrian Norris <computersforpeace@gmail.com>
      Signed-off-by: default avatarAmit Pundir <amit.pundir@linaro.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2288ba07
    • Florian Fainelli's avatar
      net: korina: Fix NAPI versus resources freeing · 7e65a444
      Florian Fainelli authored
      commit e6afb1ad upstream.
      
      Commit beb0babf ("korina: disable napi on close and restart")
      introduced calls to napi_disable() that were missing before,
      unfortunately this leaves a small window during which NAPI has a chance
      to run, yet we just freed resources since korina_free_ring() has been
      called:
      
      Fix this by disabling NAPI first then freeing resource, and make sure
      that we also cancel the restart task before doing the resource freeing.
      
      Fixes: beb0babf ("korina: disable napi on close and restart")
      Reported-by: default avatarAlexandros C. Couloumbis <alex@ozo.com>
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarAmit Pundir <amit.pundir@linaro.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7e65a444
    • Jon Mason's avatar
      ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags · 67a86748
      Jon Mason authored
      commit 0c2bf9f9 upstream.
      
      GIC_PPI flags were misconfigured for the timers, resulting in errors
      like:
      [    0.000000] GIC: PPI11 is secure or misconfigured
      
      Changing them to being edge triggered corrects the issue
      Suggested-by: default avatarRafał Miłecki <rafal@milecki.pl>
      Signed-off-by: default avatarJon Mason <jon.mason@broadcom.com>
      Fixes: d27509f1 ("ARM: BCM5301X: add dts files for BCM4708 SoC")
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      [AmitP: Resolved minor cherry-pick conflict]
      Signed-off-by: default avatarAmit Pundir <amit.pundir@linaro.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      67a86748
    • Mark Rutland's avatar
      mm: numa: avoid waiting on freed migrated pages · 86af955d
      Mark Rutland authored
      commit 3c226c63 upstream.
      
      In do_huge_pmd_numa_page(), we attempt to handle a migrating thp pmd by
      waiting until the pmd is unlocked before we return and retry.  However,
      we can race with migrate_misplaced_transhuge_page():
      
          // do_huge_pmd_numa_page                // migrate_misplaced_transhuge_page()
          // Holds 0 refs on page                 // Holds 2 refs on page
      
          vmf->ptl = pmd_lock(vma->vm_mm, vmf->pmd);
          /* ... */
          if (pmd_trans_migrating(*vmf->pmd)) {
                  page = pmd_page(*vmf->pmd);
                  spin_unlock(vmf->ptl);
                                                  ptl = pmd_lock(mm, pmd);
                                                  if (page_count(page) != 2)) {
                                                          /* roll back */
                                                  }
                                                  /* ... */
                                                  mlock_migrate_page(new_page, page);
                                                  /* ... */
                                                  spin_unlock(ptl);
                                                  put_page(page);
                                                  put_page(page); // page freed here
                  wait_on_page_locked(page);
                  goto out;
          }
      
      This can result in the freed page having its waiters flag set
      unexpectedly, which trips the PAGE_FLAGS_CHECK_AT_PREP checks in the
      page alloc/free functions.  This has been observed on arm64 KVM guests.
      
      We can avoid this by having do_huge_pmd_numa_page() take a reference on
      the page before dropping the pmd lock, mirroring what we do in
      __migration_entry_wait().
      
      When we hit the race, migrate_misplaced_transhuge_page() will see the
      reference and abort the migration, as it may do today in other cases.
      
      Fixes: b8916634 ("mm: Prevent parallel splits during THP migration")
      Link: http://lkml.kernel.org/r/1497349722-6731-2-git-send-email-will.deacon@arm.comSigned-off-by: default avatarMark Rutland <mark.rutland@arm.com>
      Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      Acked-by: default avatarSteve Capper <steve.capper@arm.com>
      Acked-by: default avatarKirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Acked-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Cc: Mel Gorman <mgorman@suse.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      
      86af955d
    • Kees Cook's avatar
      sysctl: enable strict writes · fc7a4b8b
      Kees Cook authored
      commit 41662f5c upstream.
      
      SYSCTL_WRITES_WARN was added in commit f4aacea2 ("sysctl: allow for
      strict write position handling"), and released in v3.16 in August of
      2014.  Since then I can find only 1 instance of non-zero offset
      writing[1], and it was fixed immediately in CRIU[2].  As such, it
      appears safe to flip this to the strict state now.
      
      [1] https://www.google.com/search?q="when%20file%20position%20was%20not%200"
      [2] http://lists.openvz.org/pipermail/criu/2015-April/019819.htmlSigned-off-by: default avatarKees Cook <keescook@chromium.org>
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Cc: Sumit Semwal <sumit.semwal@linaro.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      fc7a4b8b
    • Baolin Wang's avatar
      usb: gadget: f_fs: Fix possibe deadlock · 9b8f56f5
      Baolin Wang authored
      commit b3ce3ce0 upstream.
      
      When system try to close /dev/usb-ffs/adb/ep0 on one core, at the same
      time another core try to attach new UDC, which will cause deadlock as
      below scenario. Thus we should release ffs lock before issuing
      unregister_gadget_item().
      
      [   52.642225] c1 ======================================================
      [   52.642228] c1 [ INFO: possible circular locking dependency detected ]
      [   52.642236] c1 4.4.6+ #1 Tainted: G        W  O
      [   52.642241] c1 -------------------------------------------------------
      [   52.642245] c1 usb ffs open/2808 is trying to acquire lock:
      [   52.642270] c0  (udc_lock){+.+.+.}, at: [<ffffffc00065aeec>]
      		usb_gadget_unregister_driver+0x3c/0xc8
      [   52.642272] c1  but task is already holding lock:
      [   52.642283] c0  (ffs_lock){+.+.+.}, at: [<ffffffc00066b244>]
      		ffs_data_clear+0x30/0x140
      [   52.642285] c1 which lock already depends on the new lock.
      [   52.642287] c1
                     the existing dependency chain (in reverse order) is:
      [   52.642295] c0
      	       -> #1 (ffs_lock){+.+.+.}:
      [   52.642307] c0        [<ffffffc00012340c>] __lock_acquire+0x20f0/0x2238
      [   52.642314] c0        [<ffffffc000123b54>] lock_acquire+0xe4/0x298
      [   52.642322] c0        [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc
      [   52.642328] c0        [<ffffffc00066f7bc>] ffs_func_bind+0x504/0x6e8
      [   52.642334] c0        [<ffffffc000654004>] usb_add_function+0x84/0x184
      [   52.642340] c0        [<ffffffc000658ca4>] configfs_composite_bind+0x264/0x39c
      [   52.642346] c0        [<ffffffc00065b348>] udc_bind_to_driver+0x58/0x11c
      [   52.642352] c0        [<ffffffc00065b49c>] usb_udc_attach_driver+0x90/0xc8
      [   52.642358] c0        [<ffffffc0006598e0>] gadget_dev_desc_UDC_store+0xd4/0x128
      [   52.642369] c0        [<ffffffc0002c14e8>] configfs_write_file+0xd0/0x13c
      [   52.642376] c0        [<ffffffc00023c054>] vfs_write+0xb8/0x214
      [   52.642381] c0        [<ffffffc00023cad4>] SyS_write+0x54/0xb0
      [   52.642388] c0        [<ffffffc000085ff0>] el0_svc_naked+0x24/0x28
      [   52.642395] c0
                    -> #0 (udc_lock){+.+.+.}:
      [   52.642401] c0        [<ffffffc00011e3d0>] print_circular_bug+0x84/0x2e4
      [   52.642407] c0        [<ffffffc000123454>] __lock_acquire+0x2138/0x2238
      [   52.642412] c0        [<ffffffc000123b54>] lock_acquire+0xe4/0x298
      [   52.642420] c0        [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc
      [   52.642427] c0        [<ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8
      [   52.642432] c0        [<ffffffc00065995c>] unregister_gadget_item+0x28/0x44
      [   52.642439] c0        [<ffffffc00066b34c>] ffs_data_clear+0x138/0x140
      [   52.642444] c0        [<ffffffc00066b374>] ffs_data_reset+0x20/0x6c
      [   52.642450] c0        [<ffffffc00066efd0>] ffs_data_closed+0xac/0x12c
      [   52.642454] c0        [<ffffffc00066f070>] ffs_ep0_release+0x20/0x2c
      [   52.642460] c0        [<ffffffc00023dbe4>] __fput+0xb0/0x1f4
      [   52.642466] c0        [<ffffffc00023dd9c>] ____fput+0x20/0x2c
      [   52.642473] c0        [<ffffffc0000ee944>] task_work_run+0xb4/0xe8
      [   52.642482] c0        [<ffffffc0000cd45c>] do_exit+0x360/0xb9c
      [   52.642487] c0        [<ffffffc0000cf228>] do_group_exit+0x4c/0xb0
      [   52.642494] c0        [<ffffffc0000dd3c8>] get_signal+0x380/0x89c
      [   52.642501] c0        [<ffffffc00008a8f0>] do_signal+0x154/0x518
      [   52.642507] c0        [<ffffffc00008af00>] do_notify_resume+0x70/0x78
      [   52.642512] c0        [<ffffffc000085ee8>] work_pending+0x1c/0x20
      [   52.642514] c1
                    other info that might help us debug this:
      [   52.642517] c1  Possible unsafe locking scenario:
      [   52.642518] c1        CPU0                    CPU1
      [   52.642520] c1        ----                    ----
      [   52.642525] c0   lock(ffs_lock);
      [   52.642529] c0                                lock(udc_lock);
      [   52.642533] c0                                lock(ffs_lock);
      [   52.642537] c0   lock(udc_lock);
      [   52.642539] c1
                            *** DEADLOCK ***
      [   52.642543] c1 1 lock held by usb ffs open/2808:
      [   52.642555] c0  #0:  (ffs_lock){+.+.+.}, at: [<ffffffc00066b244>]
      		ffs_data_clear+0x30/0x140
      [   52.642557] c1 stack backtrace:
      [   52.642563] c1 CPU: 1 PID: 2808 Comm: usb ffs open Tainted: G
      [   52.642565] c1 Hardware name: Spreadtrum SP9860g Board (DT)
      [   52.642568] c1 Call trace:
      [   52.642573] c1 [<ffffffc00008b430>] dump_backtrace+0x0/0x170
      [   52.642577] c1 [<ffffffc00008b5c0>] show_stack+0x20/0x28
      [   52.642583] c1 [<ffffffc000422694>] dump_stack+0xa8/0xe0
      [   52.642587] c1 [<ffffffc00011e548>] print_circular_bug+0x1fc/0x2e4
      [   52.642591] c1 [<ffffffc000123454>] __lock_acquire+0x2138/0x2238
      [   52.642595] c1 [<ffffffc000123b54>] lock_acquire+0xe4/0x298
      [   52.642599] c1 [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc
      [   52.642604] c1 [<ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8
      [   52.642608] c1 [<ffffffc00065995c>] unregister_gadget_item+0x28/0x44
      [   52.642613] c1 [<ffffffc00066b34c>] ffs_data_clear+0x138/0x140
      [   52.642618] c1 [<ffffffc00066b374>] ffs_data_reset+0x20/0x6c
      [   52.642621] c1 [<ffffffc00066efd0>] ffs_data_closed+0xac/0x12c
      [   52.642625] c1 [<ffffffc00066f070>] ffs_ep0_release+0x20/0x2c
      [   52.642629] c1 [<ffffffc00023dbe4>] __fput+0xb0/0x1f4
      [   52.642633] c1 [<ffffffc00023dd9c>] ____fput+0x20/0x2c
      [   52.642636] c1 [<ffffffc0000ee944>] task_work_run+0xb4/0xe8
      [   52.642640] c1 [<ffffffc0000cd45c>] do_exit+0x360/0xb9c
      [   52.642644] c1 [<ffffffc0000cf228>] do_group_exit+0x4c/0xb0
      [   52.642647] c1 [<ffffffc0000dd3c8>] get_signal+0x380/0x89c
      [   52.642651] c1 [<ffffffc00008a8f0>] do_signal+0x154/0x518
      [   52.642656] c1 [<ffffffc00008af00>] do_notify_resume+0x70/0x78
      [   52.642659] c1 [<ffffffc000085ee8>] work_pending+0x1c/0x20
      Acked-by: default avatarMichal Nazarewicz <mina86@mina86.com>
      Signed-off-by: default avatarBaolin Wang <baolin.wang@linaro.org>
      Signed-off-by: default avatarFelipe Balbi <felipe.balbi@linux.intel.com>
      Cc: Jerry Zhang <zhangjerry@google.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9b8f56f5
    • Deepak Rawat's avatar
      drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgr · c477c689
      Deepak Rawat authored
      commit 82fcee52 upstream.
      
      The hash table created during vmw_cmdbuf_res_man_create was
      never freed. This causes memory leak in context creation.
      Added the corresponding drm_ht_remove in vmw_cmdbuf_res_man_destroy.
      
      Tested for memory leak by running piglit overnight and kernel
      memory is not inflated which earlier was.
      Signed-off-by: default avatarDeepak Rawat <drawat@vmware.com>
      Reviewed-by: default avatarSinclair Yeh <syeh@vmware.com>
      Signed-off-by: default avatarThomas Hellstrom <thellstrom@vmware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c477c689
    • Hui Wang's avatar
      ALSA: hda - set input_path bitmap to zero after moving it to new place · 19ef1f1d
      Hui Wang authored
      commit a8f20fd2 upstream.
      
      Recently we met a problem, the codec has valid adcs and input pins,
      and they can form valid input paths, but the driver does not build
      valid controls for them like "Mic boost", "Capture Volume" and
      "Capture Switch".
      
      Through debugging, I found the driver needs to shrink the invalid
      adcs and input paths for this machine, so it will move the whole
      column bitmap value to the previous column, after moving it, the
      driver forgets to set the original column bitmap value to zero, as a
      result, the driver will invalidate the path whose index value is the
      original colume bitmap value. After executing this function, all
      valid input paths are invalidated by a mistake, there are no any
      valid input paths, so the driver won't build controls for them.
      
      Fixes: 3a65bcdc ("ALSA: hda - Fix inconsistent input_paths after ADC reduction")
      Signed-off-by: default avatarHui Wang <hui.wang@canonical.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      19ef1f1d
    • Paul Burton's avatar
      MIPS: Fix IRQ tracing & lockdep when rescheduling · a2e940eb
      Paul Burton authored
      commit d8550860 upstream.
      
      When the scheduler sets TIF_NEED_RESCHED & we call into the scheduler
      from arch/mips/kernel/entry.S we disable interrupts. This is true
      regardless of whether we reach work_resched from syscall_exit_work,
      resume_userspace or by looping after calling schedule(). Although we
      disable interrupts in these paths we don't call trace_hardirqs_off()
      before calling into C code which may acquire locks, and we therefore
      leave lockdep with an inconsistent view of whether interrupts are
      disabled or not when CONFIG_PROVE_LOCKING & CONFIG_DEBUG_LOCKDEP are
      both enabled.
      
      Without tracing this interrupt state lockdep will print warnings such
      as the following once a task returns from a syscall via
      syscall_exit_partial with TIF_NEED_RESCHED set:
      
      [   49.927678] ------------[ cut here ]------------
      [   49.934445] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3687 check_flags.part.41+0x1dc/0x1e8
      [   49.946031] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)
      [   49.946355] CPU: 0 PID: 1 Comm: init Not tainted 4.10.0-00439-gc9fd5d362289-dirty #197
      [   49.963505] Stack : 0000000000000000 ffffffff81bb5d6a 0000000000000006 ffffffff801ce9c4
      [   49.974431]         0000000000000000 0000000000000000 0000000000000000 000000000000004a
      [   49.985300]         ffffffff80b7e487 ffffffff80a24498 a8000000ff160000 ffffffff80ede8b8
      [   49.996194]         0000000000000001 0000000000000000 0000000000000000 0000000077c8030c
      [   50.007063]         000000007fd8a510 ffffffff801cd45c 0000000000000000 a8000000ff127c88
      [   50.017945]         0000000000000000 ffffffff801cf928 0000000000000001 ffffffff80a24498
      [   50.028827]         0000000000000000 0000000000000001 0000000000000000 0000000000000000
      [   50.039688]         0000000000000000 a8000000ff127bd0 0000000000000000 ffffffff805509bc
      [   50.050575]         00000000140084e0 0000000000000000 0000000000000000 0000000000040a00
      [   50.061448]         0000000000000000 ffffffff8010e1b0 0000000000000000 ffffffff805509bc
      [   50.072327]         ...
      [   50.076087] Call Trace:
      [   50.079869] [<ffffffff8010e1b0>] show_stack+0x80/0xa8
      [   50.086577] [<ffffffff805509bc>] dump_stack+0x10c/0x190
      [   50.093498] [<ffffffff8015dde0>] __warn+0xf0/0x108
      [   50.099889] [<ffffffff8015de34>] warn_slowpath_fmt+0x3c/0x48
      [   50.107241] [<ffffffff801c15b4>] check_flags.part.41+0x1dc/0x1e8
      [   50.114961] [<ffffffff801c239c>] lock_is_held_type+0x8c/0xb0
      [   50.122291] [<ffffffff809461b8>] __schedule+0x8c0/0x10f8
      [   50.129221] [<ffffffff80946a60>] schedule+0x30/0x98
      [   50.135659] [<ffffffff80106278>] work_resched+0x8/0x34
      [   50.142397] ---[ end trace 0cb4f6ef5b99fe21 ]---
      [   50.148405] possible reason: unannotated irqs-off.
      [   50.154600] irq event stamp: 400463
      [   50.159566] hardirqs last  enabled at (400463): [<ffffffff8094edc8>] _raw_spin_unlock_irqrestore+0x40/0xa8
      [   50.171981] hardirqs last disabled at (400462): [<ffffffff8094eb98>] _raw_spin_lock_irqsave+0x30/0xb0
      [   50.183897] softirqs last  enabled at (400450): [<ffffffff8016580c>] __do_softirq+0x4ac/0x6a8
      [   50.195015] softirqs last disabled at (400425): [<ffffffff80165e78>] irq_exit+0x110/0x128
      
      Fix this by using the TRACE_IRQS_OFF macro to call trace_hardirqs_off()
      when CONFIG_TRACE_IRQFLAGS is enabled. This is done before invoking
      schedule() following the work_resched label because:
      
       1) Interrupts are disabled regardless of the path we take to reach
          work_resched() & schedule().
      
       2) Performing the tracing here avoids the need to do it in paths which
          disable interrupts but don't call out to C code before hitting a
          path which uses the RESTORE_SOME macro that will call
          trace_hardirqs_on() or trace_hardirqs_off() as appropriate.
      
      We call trace_hardirqs_on() using the TRACE_IRQS_ON macro before calling
      syscall_trace_leave() for similar reasons, ensuring that lockdep has a
      consistent view of state after we re-enable interrupts.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/15385/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a2e940eb
    • Paul Burton's avatar
      MIPS: pm-cps: Drop manual cache-line alignment of ready_count · 1365016f
      Paul Burton authored
      commit 161c51cc upstream.
      
      We allocate memory for a ready_count variable per-CPU, which is accessed
      via a cached non-coherent TLB mapping to perform synchronisation between
      threads within the core using LL/SC instructions. In order to ensure
      that the variable is contained within its own data cache line we
      allocate 2 lines worth of memory & align the resulting pointer to a line
      boundary. This is however unnecessary, since kmalloc is guaranteed to
      return memory which is at least cache-line aligned (see
      ARCH_DMA_MINALIGN). Stop the redundant manual alignment.
      
      Besides cleaning up the code & avoiding needless work, this has the side
      effect of avoiding an arithmetic error found by Bryan on 64 bit systems
      due to the 32 bit size of the former dlinesz. This led the ready_count
      variable to have its upper 32b cleared erroneously for MIPS64 kernels,
      causing problems when ready_count was later used on MIPS64 via cpuidle.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Fixes: 3179d37e ("MIPS: pm-cps: add PM state entry code for CPS systems")
      Reported-by: default avatarBryan O'Donoghue <bryan.odonoghue@imgtec.com>
      Reviewed-by: default avatarBryan O'Donoghue <bryan.odonoghue@imgtec.com>
      Tested-by: default avatarBryan O'Donoghue <bryan.odonoghue@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/15383/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1365016f
    • James Hogan's avatar
      MIPS: Avoid accidental raw backtrace · c9c5c35b
      James Hogan authored
      commit 85423636 upstream.
      
      Since commit 81a76d71 ("MIPS: Avoid using unwind_stack() with
      usermode") show_backtrace() invokes the raw backtracer when
      cp0_status & ST0_KSU indicates user mode to fix issues on EVA kernels
      where user and kernel address spaces overlap.
      
      However this is used by show_stack() which creates its own pt_regs on
      the stack and leaves cp0_status uninitialised in most of the code paths.
      This results in the non deterministic use of the raw back tracer
      depending on the previous stack content.
      
      show_stack() deals exclusively with kernel mode stacks anyway, so
      explicitly initialise regs.cp0_status to KSU_KERNEL (i.e. 0) to ensure
      we get a useful backtrace.
      
      Fixes: 81a76d71 ("MIPS: Avoid using unwind_stack() with usermode")
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/16656/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c9c5c35b
    • Julien Grall's avatar
      arm64: cpuinfo: Missing NULL terminator in compat_hwcap_str · 8d87bf7c
      Julien Grall authored
      commit f228b494 upstream.
      
      The loop that browses the array compat_hwcap_str will stop when a NULL
      is encountered, however NULL is missing at the end of array. This will
      lead to overrun until a NULL is found somewhere in the following memory.
      In reality, this works out because the compat_hwcap2_str array tends to
      follow immediately in memory, and that *is* terminated correctly.
      Furthermore, the unsigned int compat_elf_hwcap is checked before
      printing each capability, so we end up doing the right thing because
      the size of the two arrays is less than 32. Still, this is an obvious
      mistake and should be fixed.
      
      Note for backporting: commit 12d11817 ("arm64: Move
      /proc/cpuinfo handling code") moved this code in v4.4. Prior to that
      commit, the same change should be made in arch/arm64/kernel/setup.c.
      
      Fixes: 44b82b77 "arm64: Fix up /proc/cpuinfo"
      Signed-off-by: default avatarJulien Grall <julien.grall@arm.com>
      Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8d87bf7c
    • Gao Feng's avatar
      net: 8021q: Fix one possible panic caused by BUG_ON in free_netdev · 3930a417
      Gao Feng authored
      
      [ Upstream commit 9745e362 ]
      
      The register_vlan_device would invoke free_netdev directly, when
      register_vlan_dev failed. It would trigger the BUG_ON in free_netdev
      if the dev was already registered. In this case, the netdev would be
      freed in netdev_run_todo later.
      
      So add one condition check now. Only when dev is not registered, then
      free it directly.
      
      The following is the part coredump when netdev_upper_dev_link failed
      in register_vlan_dev. I removed the lines which are too long.
      
      [  411.237457] ------------[ cut here ]------------
      [  411.237458] kernel BUG at net/core/dev.c:7998!
      [  411.237484] invalid opcode: 0000 [#1] SMP
      [  411.237705]  [last unloaded: 8021q]
      [  411.237718] CPU: 1 PID: 12845 Comm: vconfig Tainted: G            E   4.12.0-rc5+ #6
      [  411.237737] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015
      [  411.237764] task: ffff9cbeb6685580 task.stack: ffffa7d2807d8000
      [  411.237782] RIP: 0010:free_netdev+0x116/0x120
      [  411.237794] RSP: 0018:ffffa7d2807dbdb0 EFLAGS: 00010297
      [  411.237808] RAX: 0000000000000002 RBX: ffff9cbeb6ba8fd8 RCX: 0000000000001878
      [  411.237826] RDX: 0000000000000001 RSI: 0000000000000282 RDI: 0000000000000000
      [  411.237844] RBP: ffffa7d2807dbdc8 R08: 0002986100029841 R09: 0002982100029801
      [  411.237861] R10: 0004000100029980 R11: 0004000100029980 R12: ffff9cbeb6ba9000
      [  411.238761] R13: ffff9cbeb6ba9060 R14: ffff9cbe60f1a000 R15: ffff9cbeb6ba9000
      [  411.239518] FS:  00007fb690d81700(0000) GS:ffff9cbebb640000(0000) knlGS:0000000000000000
      [  411.239949] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [  411.240454] CR2: 00007f7115624000 CR3: 0000000077cdf000 CR4: 00000000003406e0
      [  411.240936] Call Trace:
      [  411.241462]  vlan_ioctl_handler+0x3f1/0x400 [8021q]
      [  411.241910]  sock_ioctl+0x18b/0x2c0
      [  411.242394]  do_vfs_ioctl+0xa1/0x5d0
      [  411.242853]  ? sock_alloc_file+0xa6/0x130
      [  411.243465]  SyS_ioctl+0x79/0x90
      [  411.243900]  entry_SYSCALL_64_fastpath+0x1e/0xa9
      [  411.244425] RIP: 0033:0x7fb69089a357
      [  411.244863] RSP: 002b:00007ffcd04e0fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
      [  411.245445] RAX: ffffffffffffffda RBX: 00007ffcd04e2884 RCX: 00007fb69089a357
      [  411.245903] RDX: 00007ffcd04e0fd0 RSI: 0000000000008983 RDI: 0000000000000003
      [  411.246527] RBP: 00007ffcd04e0fd0 R08: 0000000000000000 R09: 1999999999999999
      [  411.246976] R10: 000000000000053f R11: 0000000000000202 R12: 0000000000000004
      [  411.247414] R13: 00007ffcd04e1128 R14: 00007ffcd04e2888 R15: 0000000000000001
      [  411.249129] RIP: free_netdev+0x116/0x120 RSP: ffffa7d2807dbdb0
      Signed-off-by: default avatarGao Feng <gfree.wind@vip.163.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3930a417
    • Wei Wang's avatar
      decnet: always not take dst->__refcnt when inserting dst into hash table · 316e55aa
      Wei Wang authored
      
      [ Upstream commit 76371d2e ]
      
      In the existing dn_route.c code, dn_route_output_slow() takes
      dst->__refcnt before calling dn_insert_route() while dn_route_input_slow()
      does not take dst->__refcnt before calling dn_insert_route().
      This makes the whole routing code very buggy.
      In dn_dst_check_expire(), dnrt_free() is called when rt expires. This
      makes the routes inserted by dn_route_output_slow() not able to be
      freed as the refcnt is not released.
      In dn_dst_gc(), dnrt_drop() is called to release rt which could
      potentially cause the dst->__refcnt to be dropped to -1.
      In dn_run_flush(), dst_free() is called to release all the dst. Again,
      it makes the dst inserted by dn_route_output_slow() not able to be
      released and also, it does not wait on the rcu and could potentially
      cause crash in the path where other users still refer to this dst.
      
      This patch makes sure both input and output path do not take
      dst->__refcnt before calling dn_insert_route() and also makes sure
      dnrt_free()/dst_free() is called when removing dst from the hash table.
      The only difference between those 2 calls is that dnrt_free() waits on
      the rcu while dst_free() does not.
      Signed-off-by: default avatarWei Wang <weiwan@google.com>
      Acked-by: default avatarMartin KaFai Lau <kafai@fb.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      316e55aa
    • Xin Long's avatar
      ipv6: fix calling in6_ifa_hold incorrectly for dad work · 00e32559
      Xin Long authored
      
      [ Upstream commit f8a894b2 ]
      
      Now when starting the dad work in addrconf_mod_dad_work, if the dad work
      is idle and queued, it needs to hold ifa.
      
      The problem is there's one gap in [1], during which if the pending dad work
      is removed elsewhere. It will miss to hold ifa, but the dad word is still
      idea and queue.
      
              if (!delayed_work_pending(&ifp->dad_work))
                      in6_ifa_hold(ifp);
                          <--------------[1]
              mod_delayed_work(addrconf_wq, &ifp->dad_work, delay);
      
      An use-after-free issue can be caused by this.
      
      Chen Wei found this issue when WARN_ON(!hlist_unhashed(&ifp->addr_lst)) in
      net6_ifa_finish_destroy was hit because of it.
      
      As Hannes' suggestion, this patch is to fix it by holding ifa first in
      addrconf_mod_dad_work, then calling mod_delayed_work and putting ifa if
      the dad_work is already in queue.
      
      Note that this patch did not choose to fix it with:
      
        if (!mod_delayed_work(delay))
                in6_ifa_hold(ifp);
      
      As with it, when delay == 0, dad_work would be scheduled immediately, all
      addrconf_mod_dad_work(0) callings had to be moved under ifp->lock.
      Reported-by: default avatarWei Chen <weichen@redhat.com>
      Suggested-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Acked-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      00e32559
    • WANG Cong's avatar
      igmp: add a missing spin_lock_init() · e3fa173e
      WANG Cong authored
      
      [ Upstream commit b4846fc3 ]
      
      Andrey reported a lockdep warning on non-initialized
      spinlock:
      
       INFO: trying to register non-static key.
       the code is fine but needs lockdep annotation.
       turning off the locking correctness validator.
       CPU: 1 PID: 4099 Comm: a.out Not tainted 4.12.0-rc6+ #9
       Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
       Call Trace:
        __dump_stack lib/dump_stack.c:16
        dump_stack+0x292/0x395 lib/dump_stack.c:52
        register_lock_class+0x717/0x1aa0 kernel/locking/lockdep.c:755
        ? 0xffffffffa0000000
        __lock_acquire+0x269/0x3690 kernel/locking/lockdep.c:3255
        lock_acquire+0x22d/0x560 kernel/locking/lockdep.c:3855
        __raw_spin_lock_bh ./include/linux/spinlock_api_smp.h:135
        _raw_spin_lock_bh+0x36/0x50 kernel/locking/spinlock.c:175
        spin_lock_bh ./include/linux/spinlock.h:304
        ip_mc_clear_src+0x27/0x1e0 net/ipv4/igmp.c:2076
        igmpv3_clear_delrec+0xee/0x4f0 net/ipv4/igmp.c:1194
        ip_mc_destroy_dev+0x4e/0x190 net/ipv4/igmp.c:1736
      
      We miss a spin_lock_init() in igmpv3_add_delrec(), probably
      because previously we never use it on this code path. Since
      we already unlink it from the global mc_tomb list, it is
      probably safe not to acquire this spinlock here. It does not
      harm to have it although, to avoid conditional locking.
      
      Fixes: c38b7d32 ("igmp: acquire pmc lock for ip_mc_clear_src()")
      Reported-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Signed-off-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e3fa173e
    • WANG Cong's avatar
      igmp: acquire pmc lock for ip_mc_clear_src() · 2f8e1d05
      WANG Cong authored
      
      [ Upstream commit c38b7d32 ]
      
      Andrey reported a use-after-free in add_grec():
      
              for (psf = *psf_list; psf; psf = psf_next) {
      		...
                      psf_next = psf->sf_next;
      
      where the struct ip_sf_list's were already freed by:
      
       kfree+0xe8/0x2b0 mm/slub.c:3882
       ip_mc_clear_src+0x69/0x1c0 net/ipv4/igmp.c:2078
       ip_mc_dec_group+0x19a/0x470 net/ipv4/igmp.c:1618
       ip_mc_drop_socket+0x145/0x230 net/ipv4/igmp.c:2609
       inet_release+0x4e/0x1c0 net/ipv4/af_inet.c:411
       sock_release+0x8d/0x1e0 net/socket.c:597
       sock_close+0x16/0x20 net/socket.c:1072
      
      This happens because we don't hold pmc->lock in ip_mc_clear_src()
      and a parallel mr_ifc_timer timer could jump in and access them.
      
      The RCU lock is there but it is merely for pmc itself, this
      spinlock could actually ensure we don't access them in parallel.
      
      Thanks to Eric and Long for discussion on this bug.
      Reported-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Cc: Eric Dumazet <edumazet@google.com>
      Cc: Xin Long <lucien.xin@gmail.com>
      Signed-off-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Reviewed-by: default avatarXin Long <lucien.xin@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2f8e1d05
    • Jia-Ju Bai's avatar
      net: caif: Fix a sleep-in-atomic bug in cfpkt_create_pfx · e1f1dea9
      Jia-Ju Bai authored
      
      [ Upstream commit f146e872 ]
      
      The kernel may sleep under a rcu read lock in cfpkt_create_pfx, and the
      function call path is:
      cfcnfg_linkup_rsp (acquire the lock by rcu_read_lock)
        cfctrl_linkdown_req
          cfpkt_create
            cfpkt_create_pfx
              alloc_skb(GFP_KERNEL) --> may sleep
      cfserl_receive (acquire the lock by rcu_read_lock)
        cfpkt_split
          cfpkt_create_pfx
            alloc_skb(GFP_KERNEL) --> may sleep
      
      There is "in_interrupt" in cfpkt_create_pfx to decide use "GFP_KERNEL" or
      "GFP_ATOMIC". In this situation, "GFP_KERNEL" is used because the function
      is called under a rcu read lock, instead in interrupt.
      
      To fix it, only "GFP_ATOMIC" is used in cfpkt_create_pfx.
      Signed-off-by: default avatarJia-Ju Bai <baijiaju1990@163.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e1f1dea9
    • Krister Johansen's avatar
      Fix an intermittent pr_emerg warning about lo becoming free. · 721ee8db
      Krister Johansen authored
      
      [ Upstream commit f186ce61 ]
      
      It looks like this:
      
      Message from syslogd@flamingo at Apr 26 00:45:00 ...
       kernel:unregister_netdevice: waiting for lo to become free. Usage count = 4
      
      They seem to coincide with net namespace teardown.
      
      The message is emitted by netdev_wait_allrefs().
      
      Forced a kdump in netdev_run_todo, but found that the refcount on the lo
      device was already 0 at the time we got to the panic.
      
      Used bcc to check the blocking in netdev_run_todo.  The only places
      where we're off cpu there are in the rcu_barrier() and msleep() calls.
      That behavior is expected.  The msleep time coincides with the amount of
      time we spend waiting for the refcount to reach zero; the rcu_barrier()
      wait times are not excessive.
      
      After looking through the list of callbacks that the netdevice notifiers
      invoke in this path, it appears that the dst_dev_event is the most
      interesting.  The dst_ifdown path places a hold on the loopback_dev as
      part of releasing the dev associated with the original dst cache entry.
      Most of our notifier callbacks are straight-forward, but this one a)
      looks complex, and b) places a hold on the network interface in
      question.
      
      I constructed a new bcc script that watches various events in the
      liftime of a dst cache entry.  Note that dst_ifdown will take a hold on
      the loopback device until the invalidated dst entry gets freed.
      
      [      __dst_free] on DST: ffff883ccabb7900 IF tap1008300eth0 invoked at 1282115677036183
          __dst_free
          rcu_nocb_kthread
          kthread
          ret_from_fork
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      721ee8db
    • Mateusz Jurczyk's avatar
      decnet: dn_rtmsg: Improve input length sanitization in dnrmg_receive_user_skb · 80f5fba8
      Mateusz Jurczyk authored
      
      [ Upstream commit dd0da17b ]
      
      Verify that the length of the socket buffer is sufficient to cover the
      nlmsghdr structure before accessing the nlh->nlmsg_len field for further
      input sanitization. If the client only supplies 1-3 bytes of data in
      sk_buff, then nlh->nlmsg_len remains partially uninitialized and
      contains leftover memory from the corresponding kernel allocation.
      Operating on such data may result in indeterminate evaluation of the
      nlmsg_len < sizeof(*nlh) expression.
      
      The bug was discovered by a runtime instrumentation designed to detect
      use of uninitialized memory in the kernel. The patch prevents this and
      other similar tools (e.g. KMSAN) from flagging this behavior in the future.
      Signed-off-by: default avatarMateusz Jurczyk <mjurczyk@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      80f5fba8
    • Alexander Potapenko's avatar
      net: don't call strlen on non-terminated string in dev_set_alias() · 0d487bc5
      Alexander Potapenko authored
      
      [ Upstream commit c28294b9 ]
      
      KMSAN reported a use of uninitialized memory in dev_set_alias(),
      which was caused by calling strlcpy() (which in turn called strlen())
      on the user-supplied non-terminated string.
      Signed-off-by: default avatarAlexander Potapenko <glider@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0d487bc5
    • Eric Leblond's avatar
      netfilter: synproxy: fix conntrackd interaction · dc818ce5
      Eric Leblond authored
      commit 87e94dbc upstream.
      
      This patch fixes the creation of connection tracking entry from
      netlink when synproxy is used. It was missing the addition of
      the synproxy extension.
      
      This was causing kernel crashes when a conntrack entry created by
      conntrackd was used after the switch of traffic from active node
      to the passive node.
      Signed-off-by: default avatarEric Leblond <eric@regit.org>
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      dc818ce5
    • Eric Dumazet's avatar
      netfilter: xt_TCPMSS: add more sanity tests on tcph->doff · f4549a69
      Eric Dumazet authored
      commit 2638fd0f upstream.
      
      Denys provided an awesome KASAN report pointing to an use
      after free in xt_TCPMSS
      
      I have provided three patches to fix this issue, either in xt_TCPMSS or
      in xt_tcpudp.c. It seems xt_TCPMSS patch has the smallest possible
      impact.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarDenys Fedoryshchenko <nuclearcat@nuclearcat.com>
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f4549a69
    • Willem de Bruijn's avatar
      ipv6: release dst on error in ip6_dst_lookup_tail · 51ef22af
      Willem de Bruijn authored
      commit 00ea1cee upstream.
      
      If ip6_dst_lookup_tail has acquired a dst and fails the IPv4-mapped
      check, release the dst before returning an error.
      
      Fixes: ec5e3b0a ("ipv6: Inhibit IPv4-mapped src address on the wire.")
      Signed-off-by: default avatarWillem de Bruijn <willemb@google.com>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      51ef22af