- 11 Jun, 2024 16 commits
-
-
Jouni Högander authored
Convert intel_alpm_aux_wake_supported and intel_alpm_aux_less_wake_supported as non-static. Use them in intel_psr.c instead of local variables. Signed-off-by:
Jouni Högander <jouni.hogander@intel.com> Reviewed-by:
Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240607134917.1327574-8-jouni.hogander@intel.com
-
Jouni Högander authored
Current intel_psr_enable_sink is a mess due to partly reusing PSR bit definitions for Panel Replay. Even thought PSR and Panel Replay enable registers do have common bits they still have also different bits and same bits with different meaning. For sake of clarity split enabling sink to PSR and Panel Replay specific parts. Also fix issue caused by using psr->panel_replay_enabled to early. Fixes: 88ae6c65 ("drm/i915/psr: Unify panel replay enable/disable sink") Signed-off-by:
-
Jouni Högander authored
Add missing Panel Replay Enable SU Region ET bit defined in DP2.1 specification. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240607134917.1327574-6-jouni.hogander@intel.com
-
Jouni Högander authored
Panel Replay is not enabled if there are no active planes. Do not compare it on pipe comparison. Otherwise we get pipe mismatch. Fixes: ac9ef327 ("drm/i915/psr: Panel replay has to be enabled before link training") Signed-off-by:
-
Jouni Högander authored
Currently intel_dp_vsc_sdp_unpack is not taking into account Panel Replay vsc sdp. Fix this by adding vsc sdp revision 0x6 and length 0x10 into intel_dp_vsc_sdp_unpack Signed-off-by:
-
Jouni Högander authored
Currently AUX Less Wake lines are not written into ALPM_CTL. Fix this. Fixes: 1ccbf135 ("drm/i915/psr: Enable ALPM on source side for eDP Panel replay") Signed-off-by:
-
Jouni Högander authored
We want to have own variables for fast wake lines and aux less wake time. It might be needed to choose if we can enable Panel Replay Selective Update or PSR2. Also currently aux less wake time is overwritten by calculated fast wake time. v2:use aux less wake time in intel_alpm_lobf_compute_config Fixes: da6a9836 ("drm/i915/psr: Calculate aux less wake time") Signed-off-by:
-
Mitul Golani authored
Compute Fixed Average Vtotal/CMRR with resepect to userspace VRR enablement. Also calculate required parameters in case of CMRR is enabled. During intel_vrr_compute_config, CMRR is getting enabled based on userspace has enabled Variable refresh mode with VRR timing generator or not. Make CMRR as small subset of FAVT mode, when Panel is running on Fixed refresh rate and on VRR framework then only enable CMRR to match with actual refresh rate. --v2: - Update is_cmrr_frac_required function return as bool, not int. [Jani] - Use signed int math instead of unsigned in cmrr_get_vtotal2. [Jani] - Fix typo and usage of camel case in cmrr_get_vtotal. [Jani] - Use do_div in cmrr_get_vtotalwhile calculating cmrr_m. [ Jani] - Simplify cmrr and vrr compute config in intel_vrr_compute_config. [Jani] - Correct valiable name usage in is_cmrr_frac_required. [Ville] --v3: - Removing RFC tag. --v4: - Added edp check to address edp usecase for now. (ville) - Updated is_cmrr_fraction_required to more simplified calculation. - on longterm goal to be worked upon uapi as suggestion from ville. --v5: - Correct vtotal paramas accuracy and add 2 digit precision. - Avoid using DIV_ROUND_UP and improve scanline precision. --v6: - Make CMRR a small subset of FAVT mode. --v7: - Update commit message to avoid confusion with Legacy VRR (Ankit). - Add cmrr.enable in last, so remove from this patch. --v8: - Set cmrr.enable in current patch instead of separate patch (Ankit). - Since vrr.enable and cmrr.enable are not mutually exclusive, handle accordingly (Ankit). - is_edp is not required inside is_cmrr_frac_required function (Ankit). - Add video_mode_required flag for future enhancement. - Correct cmrr_m/cmrr_n calculation. --v9: - Move patch to last and set other bits before computing cmrr.enable.(Ankit) - Add TODO: for to address target refresh rate precision as future enhancement. Signed-off-by:
Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Reviewed-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240610072203.24956-10-mitulkumar.ajitkumar.golani@intel.com
-
Mitul Golani authored
Compute vrr vsync params in case of FAVT as well instead of only to AVT mode of operation. --v2: - Remove redundant computation for vrr_vsync_start and vrr_vsync_end(Ankit). --v3: - vrr.enable and cmrr.enable check together is not required as both will be true at the same point in time. (Ankit) - Replace vrr.enable flag to cmrr.enable, mistakenly added. (Ankit) Signed-off-by:
-
Mitul Golani authored
Compute params for Adaptive Sync SDP when Fixed Average Vtotal mode is enabled. --v2: Since vrr.enable is set in case of cmrr also, handle accordingly(Ankit). --v3: - Since vrr.enable is set in case of cmrr also, handle accordingly(Ankit). - check cmrr.enable when CMRR flags are set during intel_dp_compute_as_sdp. --v4: - Use drm_mode_vrefresh instead of manual calculation (Ankit). Signed-off-by:
-
Mitul Golani authored
Add support of pack and unpack for target_rr_divider. --v2: - Set Target Refresh Rate Divider bit when related AS SDP bit is set (Ankit). --v3: - target_rr_divider is bools so set accordingly (Ankit). Signed-off-by:
-
Mitul Golani authored
Add target_rr_divider to structure representing AS SDP. It is valid only in FAVT mode, sink device ignores the bit in AVT mode. --v2: - Update commit header and send patch to dri-devel. Signed-off-by:
Arun R Murthy <arun.r.murthy@intel.com> Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Mitul Golani authored
Add/update trans_vrr_ctl flag when crtc_state->cmrr.enable is set, With this commit setting the stage for subsequent CMRR enablement. --v2: - Check pipe active state in cmrr enabling. [Jani] - Remove usage of bitwise OR on booleans. [Jani] - Revert unrelated changes. [Jani] - Update intel_vrr_enable, vrr and cmrr enable conditions. [Jani] - Simplify whole if-ladder in intel_vrr_enable. [Jani] - Revert patch restructuring mistakes in intel_vrr_get_config. [Jani] --v3: - Check pipe active state in cmrr disabling.[Jani] - Correct messed up condition in intel_vrr_enable. [Jani] --v4: - Removing RFC tag. --v5: - CMRR handling in co-existatnce of LRR and DRRS. --v7: - Rebase on top of AS SDP merge. --v8: - Remove cmrr_enabling/disabling and update commit message. (Ankit) --v9: - Revert removed line(Ankit). Signed-off-by:
-
Mitul Golani authored
Add register definitions for Transcoder Fixed Average Vtotal mode/CMRR function, with the necessary bitfields. Compute these registers when CMRR is enabled, extending Adaptive refresh rate capabilities. --v2: - Use intel_de_read64_2x32 in intel_vrr_get_config. [Jani] - Fix indent and order based on register offset. [Jani] --v3: - Removing RFC tag. --v4: - Update place holder for CMRR register definition. (Jani) --v5: - Add CMRR register definitions to a separate file intel_vrr_reg.h. --v6: - Fixed indentation. (Jani) - Add dependency header intel_display_reg_defs.h. (Jani) - Rename file name to intel_vrr_regs.h instead of reg.h (Jani) --v7: - Remove adding CMRR flag to vrr_ctl register during set_transcoder_timing, as it is already being done during intel_vrr_enable. (Ankit) Signed-off-by:
-
Mitul Golani authored
Move VRR related register definitions to a separate file called intel_vrr_regs.h. Signed-off-by:
-
Mitul Golani authored
Update the indentation for the VRR register definition and its bits, and fix checkpatch issues to ensure smooth movement of registers and bits. --v2: - Keep XELPD_VRR_CTL_VRR_GUARDBAND(x) to avoid readability (Ankit). - Fix all indentation related VRR registers and bits instead of checkpatch one. Signed-off-by:
-
- 07 Jun, 2024 24 commits
-
-
Balasubramani Vivekanandan authored
Platform descriptor defined and PCI IDs added for Battlemage. Signed-off-by:
Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Reviewed-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the HSW_STEREO_3D_CTL register macro. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/76f980f5ed3638746c6b58dec7d0bd8c43a37987.1717514638.git.jani.nikula@intel.com
-
Ville Syrjälä authored
Since BDB version 211 block 46 has included more luminance and gamma related information. Define it fully. The data is semi-based on DisplayID v2.0 apparently. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240605134756.17099-2-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
The VBT spec does a very poor job of defining how the chromaticity coordinates in block 46 are laid out. After double checking the Windows implementation it turns out these more or less match the EDID definition, where the 10bit values are split into 2bit + 8bit chunks. Adjust our struct definition to reflect that. Signed-off-by:
-
Jani Nikula authored
We stopped using ACPI button in commit 05c72e77 ("drm/i915: Nuke the LVDS lid notifier"). Also stop force enabling the ACPI_BUTTON config. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Closes: https://lore.kernel.org/r/ZmGsJsXhHcPV48XJ@intel.comReviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the MTL_CLKGATE_DIS_TRANS register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the TRANS_SET_CONTEXT_LATENCY register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the TRANS_MSA_MISC register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the TGL_DP_TP_STATUS register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the TGL_DP_TP_CTL register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the TRANS_DDI_FUNC_CTL2 register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the TRANS_DDI_FUNC_CTL register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PIPE_LINK_N2 register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PIPE_LINK_M2 register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PIPE_LINK_N1 register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PIPE_LINK_M1 register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PIPE_DATA_N2 register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PIPE_DATA_M2 register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PIPE_DATA_N1 register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PIPE_DATA_M1 register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the SWF3 register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the SWF1 register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the SWF0 register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the CHV_CANVAS register macro. Reviewed-by:
-
