- 04 Aug, 2015 6 commits
-
-
Herbert Xu authored
This patch converts authenc to the new AEAD interface. Signed-off-by:Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
This patch disables the authenc tests while the conversion to the new IV calling convention takes place. It also replaces the authenc test vectors with ones that will work with the new IV convention. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Herbert Xu authored
Merge the crypto tree to pull in the qat registration bug fix.
-
Aaron Sierra authored
Compiling the talitos driver with my GCC 4.3.1 e500v2 cross-compiler resulted in a failed build due to the anonymous union/structures introduced in this commit: crypto: talitos - enhanced talitos_desc struct for SEC1 The build error was: drivers/crypto/talitos.h:56: error: unknown field 'len' specified in initializer drivers/crypto/talitos.h:56: warning: missing braces around initializer drivers/crypto/talitos.h:56: warning: (near initialization for 'zero_entry.<anonymous>') drivers/crypto/talitos.h:57: error: unknown field 'j_extent' specified in initializer drivers/crypto/talitos.h:58: error: unknown field 'eptr' specified in initializer drivers/crypto/talitos.h:58: warning: excess elements in struct initializer drivers/crypto/talitos.h:58: warning: (near initialization for 'zero_entry') make[2]: *** [drivers/crypto/talitos.o] Error 1 make[1]: *** [drivers/crypto] Error 2 make: *** [drivers] Error 2 This patch eliminates the errors by relying on the C standard's implicit assignment of zero to static variables. Signed-off-by:
Aaron Sierra <asierra@xes-inc.com> Signed-off-by:
-
Stephan Mueller authored
The AEAD API changes are now reflected in the crypto API doc book. Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Colin Ian King authored
Trival change, fix spelling mistake 'aquire' -> 'acquire' in dev_err message. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 31 Jul, 2015 1 commit
-
-
Horia Geant? authored
The encap shared descriptor was changed to use the new IV convention. In the process some commands were shifted, making the output length zero, caam effectively writing garbage in dst. While here, update the decap descriptor to execute the "write" commands before the "read"s (as it previously was). This makes sure the input fifo is drained before becoming full. Fixes: 46218750 ("crypto: caam - Use new IV convention") Signed-off-by:
Horia Geant? <horia.geanta@freescale.com> Signed-off-by:
Tudor Ambarus <tudor.ambarus@freescale.com> Signed-off-by:
-
- 30 Jul, 2015 3 commits
-
-
Dan Streetman authored
Change my IBM email to my personal IEEE email. I'm leaving IBM, so my email there won't work anymore. This changes the owner to my personal email, so I can still get cc'ed on patches, until someone at IBM sends a patch to take it over. Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Signed-off-by:
-
Dan Streetman authored
One of the debug messages in the NX 842 PowerNV driver is missing the required be32_to_cpu() wrapper when accessing the __be32 field csb->count. Add the wrapper so the message will show the correct count. Signed-off-by:
-
Dan Streetman authored
Return success instead of error if compression succeeds but the output is larger than the input. It's unlikely that the caller will use the compressed data since it's larger than the original uncompressed data, but there was no error and returning an error code is incorrect. Further, for testing small input buffers, the output is likely to be larger than the input and success needs to be returned to verify the test. Signed-off-by:
-
- 28 Jul, 2015 7 commits
-
-
Bruce Allan authored
There's no need to iterate through the list for instances in the accel_table since the number of devices is already known in this file. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
-
Kees Cook authored
Since the API for jent_panic() does not include format string parameters, adjust the call to panic() to use a literal string to avoid any future callers from leaking format strings into the panic message. Signed-off-by:
Kees Cook <keescook@chromium.org> Acked-by:
-
Ahsan Atta authored
Signed-off-by:
Ahsan Atta <ahsan.atta@intel.com> Signed-off-by:
-
Bruce Allan authored
Signed-off-by:
-
Bruce Allan authored
The subject macro mistakenly compares the passed-in ring size in bytes with ADF_RING_SIZE_4K which is 0x6 (an internal representation of 4KB) rather than comparing with the intended value of 4096. Signed-off-by:
-
Bruce Allan authored
The element pci_dev_id in the struct adf_hw_device_data is redundant since the PCI device id can be retrieved from the struct pci_dev. Signed-off-by:
-
Martin Schwidefsky authored
The kthread_run() function can return two different error values but the hwrng core only checks for -ENOMEM. If the other error value -EINTR is returned it is assigned to hwrng_fill and later used on a kthread_stop() call which naturally crashes. Cc: stable@vger.kernel.org Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
- 23 Jul, 2015 11 commits
-
-
Dan Streetman authored
Remove the common 'platform' registration module, and move the crypto compression driver registration into each of the pSeries and PowerNV platform NX 842 drivers. Change the nx-842.c code into simple common functions that each platform driver uses to perform constraints-based buffer changes, i.e. realigning and/or resizing buffers to match the driver's hardware requirements. The common 'platform' module was my mistake to create - since each platform driver will only load/operate when running on its own platform (i.e. a pSeries platform or a PowerNV platform), they can directly register with the crypto subsystem, using the same alg and driver name. This removes unneeded complexity. Signed-off-by:
-
Dan Streetman authored
The last commit merged nx-842.c's code into nx-842-crypto.c. It did not rename nx-842-crypto.c to nx-842.c, in order to let the patch more clearly show what was merged. This just renames nx-842-crypto.c to nx-842.c, with no changes to its code. Signed-off-by:
-
Dan Streetman authored
Merge the nx-842.c code into nx-842-crypto.c. This allows later patches to remove the 'platform' driver, and instead allow each platform driver to directly register with the crypto compression api. Signed-off-by:
-
Dan Streetman authored
Replace the duplicated finishing code (set destination buffer length and set return code to 0) in the case of decompressing a buffer with no header with a goto to the success case of decompressing a buffer with a header. This is a trivial change that allows both success cases to use common code, and includes the pr_debug() msg in both cases as well. Signed-off-by:
-
Dan Streetman authored
Don't register the pSeries driver when parsing the device tree returns ENODEV. The nx842_probe() function in the pSeries driver returns error instead of registering as a crypto compression driver, when it receives an error return value from the nx842_OF_upd() function that probes the device tree nodes, except when ENODEV is returned. However ENODEV should not be a special case and the driver should not register when there is no hw device, or the hw device is disabled. Signed-off-by:
-
Dan Streetman authored
Move the kzalloc() calls in nx842_probe() and nx842_OF_upd() to the top of the functions, before taking the devdata spinlock. Since kzalloc() without GFP_ATOMIC can sleep, it can't be called while holding a spinlock. Move the calls to before taking the lock. Signed-off-by:
-
Dan Streetman authored
Remove the 'status' field from the pSeries NX driver data. The 'status' field isn't used by the driver at all; it simply checks the devicetree status node at initialization, and returns success if 'okay' and failure otherwise. Signed-off-by:
-
Dan Streetman authored
Remove the __init and __exit modifiers from the VIO driver probe and remove functions. The driver functions should not be marked __init/__exit because they can/will be called during runtime, not only at module init and exit. Signed-off-by:
-
Tadeusz Struk authored
When multiple devices are present in the system the driver attempts to register the same algorithm many times. Changes in v2: - use proper synchronization mechanizm between register and unregister Signed-off-by:
-
Herbert Xu authored
This patch removes a bogus BUG_ON in the ablkcipher path that triggers when the destination buffer is different from the source buffer and is scattered. Cc: stable@vger.kernel.org Signed-off-by: -
Tadeusz Struk authored
The synchronization method used atomic was bogus. Use a proper synchronization with mutex. Cc: stable@vger.kernel.org Signed-off-by:
-
- 21 Jul, 2015 2 commits
-
-
Tadeusz Struk authored
The condition checking allowed key length was invalid. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Tadeusz Struk authored
The condition checking allowed key length was invalid. Reported-by:
-
- 20 Jul, 2015 9 commits
-
-
LABBE Corentin authored
Signed-off-by:
LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by:
-
LABBE Corentin authored
Add support for the Security System included in Allwinner SoC A20. The Security System is a hardware cryptographic accelerator that support: - MD5 and SHA1 hash algorithms - AES block cipher in CBC/ECB mode with 128/196/256bits keys. - DES and 3DES block cipher in CBC/ECB mode Signed-off-by:
-
LABBE Corentin authored
This patch adds documentation for Device-Tree bindings for the Security System cryptographic accelerator driver. Signed-off-by:
-
LABBE Corentin authored
The Security System is a hardware cryptographic accelerator that support AES/MD5/SHA1/DES/3DES/PRNG algorithms. It could be found on many Allwinner SoC. This patch enable the Security System on the Allwinner A20 SoC Device-tree. Signed-off-by:
-
LABBE Corentin authored
The Security System is a hardware cryptographic accelerator that support AES/MD5/SHA1/DES/3DES/PRNG algorithms. It could be found on many Allwinner SoC. This patch enable the Security System on the Allwinner A10 SoC Device-tree. Signed-off-by:
-
Tudor Ambarus authored
An implicit truncation is done when using a variable of 64 bits in MATH command: warning: large integer implicitly truncated to unsigned type [-Woverflow] Silence the compiler by feeding it with an explicit truncated value. Signed-off-by:
-
Horia Geant? authored
When successful, the descriptor that performs RNG initialization is allowed to return a status code of 7000_0000h, since last command in the descriptor is a JUMP HALT. Signed-off-by:
-
Horia Geant? authored
HW coherency won't work properly for CAAM write transactions if AWCACHE is left to default (POR) value - 4'b0001. It has to be programmed to 4'b0010, i.e. AXI3 Cacheable bit set. For platforms that have HW coherency support: -PPC-based: the update has no effect; CAAM coherency already works due to the IOMMU (PAMU) driver setting the correct memory coherency attributes -ARM-based: the update fixes cache coherency issues, since IOMMU (SMMU) driver is not programmed to behave similar to PAMU Signed-off-by:
-
Alex Porosanu authored
In order to ensure that the ERA property is properly read from DT on all platforms, of_property_read* function needs to be used. Signed-off-by:
Alex Porosanu <alexandru.porosanu@freescale.com> Signed-off-by:
-
- 17 Jul, 2015 1 commit
-
-
Martin Willi authored
Extends the x86_64 Poly1305 authenticator by a function processing four consecutive Poly1305 blocks in parallel using AVX2 instructions. For large messages, throughput increases by ~15-45% compared to two block SSE2: testing speed of poly1305 (poly1305-simd) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 3809514 opers/sec, 365713411 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 5973423 opers/sec, 573448627 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9446779 opers/sec, 906890803 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1364814 opers/sec, 393066691 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2045780 opers/sec, 589184697 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3711946 opers/sec, 1069040592 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 573686 opers/sec, 605812732 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1647802 opers/sec, 1740079440 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 292970 opers/sec, 609378224 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 943229 opers/sec, 1961916528 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 494623 opers/sec, 2041804569 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 254045 opers/sec, 2089271014 bytes/sec testing speed of poly1305 (poly1305-simd) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 3826224 opers/sec, 367317552 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 5948638 opers/sec, 571069267 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9439110 opers/sec, 906154627 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1367756 opers/sec, 393913872 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2056881 opers/sec, 592381958 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3711153 opers/sec, 1068812179 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 574940 opers/sec, 607136745 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1948830 opers/sec, 2057964585 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 293308 opers/sec, 610082096 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 1235224 opers/sec, 2569267792 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 684405 opers/sec, 2825226316 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 367101 opers/sec, 3019039446 bytes/sec Benchmark results from a Core i5-4670T. Signed-off-by:
Martin Willi <martin@strongswan.org> Signed-off-by:
-
