When probing all the addresses for a fileserver, dispatch them in order of
descending priority to try and get back highest priority one first.

Also add a tracepoint to show the transmission and completion of the
probes.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Add a field to each address in an address list (afs_addr_list struct) that
records the current priority for that address according to the address
preference table.  We don't want to do this every time we use an address
list, so the version number of the address preference table is recorded in
the address list too and we only re-mark the list when we see the version
change.

These numbers are then displayed through /proc/net/afs/servers.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

AFS servers may have multiple addresses, but the client can't easily judge
between them as to which one is best.  For instance, an address that has a
larger RTT might actually have a better bandwidth because it goes through a
switch rather than being directly connected - but we can't work this out
dynamically unless we push through sufficient data that we can measure it.

To allow the administrator to configure this, add a list of preference
weightings for server addresses by IPv4/IPv6 address or subnet and allow
this to be viewed through a procfile and altered by writing text commands
to that same file.  Preference rules can be added/updated by:

	echo "add <proto> <addr>[/<subnet>] <prior>" >/proc/fs/afs/addr_prefs
	echo "add udp 1.2.3.4 1000" >/proc/fs/afs/addr_prefs
	echo "add udp 192.168.0.0/16 3000" >/proc/fs/afs/addr_prefs
	echo "add udp 1001:2002:0:6::/64 4000" >/proc/fs/afs/addr_prefs

and removed by:

	echo "del <proto> <addr>[/<subnet>]" >/proc/fs/afs/addr_prefs
	echo "del udp 1.2.3.4" >/proc/fs/afs/addr_prefs

where the priority is a number between 0 and 65535.

The list is split between IPv4 and IPv6 addresses and each sublist is kept
in numerical order, with rules that would otherwise match but have
different subnet masking being ordered with the most specific submatch
first.

A subsequent patch will apply these rules.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Remove afs_cmp_addr_list() as it was never implemented.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

In /proc/net/afs/servers, show the cell name and the last error for each
address in the server's list.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Create /proc/net/rxrpc/bundles to display outstanding rxrpc client
connection bundles.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Fold the afs_addr_cursor struct into the afs_operation struct and the
afs_vl_cursor struct and fold its operations into their callers also.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Use the rxrpc_peer plus the service ID as the call address instead of
passing in a sockaddr_srx down to rxrpc.  The peer record is obtained by
using rxrpc_kernel_get_peer().  This avoids the need to repeatedly look up
the peer and allows rxrpc to hold on to resources for it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Rename the ->index and ->untried fields of the afs_vl_cursor and
afs_operation struct to ->server_index and ->untried_servers to avoid
confusion with address iteration fields when those get folded in.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Add a tracepoint to track the lifetime of the afs_addr_list struct.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Simplify error handling a bit by moving it from the afs_addr_cursor struct
to the afs_operation and afs_vl_cursor structs and using the error
prioritisation function for accumulating errors from multiple sources (AFS
tries to rotate between multiple fileservers, some of which may be
inaccessible or in some state of offlinedness).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Don't put the afs_call struct in afs_wait_for_call_to_complete() but rather
have the caller do it.  This will allow the caller to fish stuff out of the
afs_call struct rather than the afs_addr_cursor struct, thereby allowing a
subsequent patch to subsume it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Wrap most op->error accesses with inline funcs which will make it easier
for a subsequent patch to replace op->error with something else.  Two
functions are added to this end:

 (1) afs_op_error() - Get the error code.

 (2) afs_op_set_error() - Set the error code.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Set op->nr_iterations to -1 to indicate that we need to begin fileserver
iteration rather than setting error to SHRT_MAX.  This makes it easier to
eliminate the address cursor.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

When processing the result of a call, handle the VIO and UAEIO abort
specifically rather than leaving it to a default case.  Rather than
erroring out unconditionally, see if there's another server if the volume
has more than one server available, otherwise return -EREMOTEIO.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Rename the failed member of struct addr_list to probe_failed as it's
specifically related to probe failures.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

In the rotation algorithms for iterating over volume location servers and
file servers, don't skip servers from which we got a valid response to a
probe (either a reply DATA packet or an ABORT) even if we didn't manage to
get an RTT reading.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Change rxrpc's API such that:

 (1) A new function, rxrpc_kernel_lookup_peer(), is provided to look up an
     rxrpc_peer record for a remote address and a corresponding function,
     rxrpc_kernel_put_peer(), is provided to dispose of it again.

 (2) When setting up a call, the rxrpc_peer object used during a call is
     now passed in rather than being set up by rxrpc_connect_call().  For
     afs, this meenat passing it to rxrpc_kernel_begin_call() rather than
     the full address (the service ID then has to be passed in as a
     separate parameter).

 (3) A new function, rxrpc_kernel_remote_addr(), is added so that afs can
     get a pointer to the transport address for display purposed, and
     another, rxrpc_kernel_remote_srx(), to gain a pointer to the full
     rxrpc address.

 (4) The function to retrieve the RTT from a call, rxrpc_kernel_get_srtt(),
     is then altered to take a peer.  This now returns the RTT or -1 if
     there are insufficient samples.

 (5) Rename rxrpc_kernel_get_peer() to rxrpc_kernel_call_get_peer().

 (6) Provide a new function, rxrpc_kernel_get_peer(), to get a ref on a
     peer the caller already has.

This allows the afs filesystem to pin the rxrpc_peer records that it is
using, allowing faster lookups and pointer comparisons rather than
comparing sockaddr_rxrpc contents.  It also makes it easier to get hold of
the RTT.  The following changes are made to afs:

 (1) The addr_list struct's addrs[] elements now hold a peer struct pointer
     and a service ID rather than a sockaddr_rxrpc.

 (2) When displaying the transport address, rxrpc_kernel_remote_addr() is
     used.

 (3) The port arg is removed from afs_alloc_addrlist() since it's always
     overridden.

 (4) afs_merge_fs_addr4() and afs_merge_fs_addr6() do peer lookup and may
     now return an error that must be handled.

 (5) afs_find_server() now takes a peer pointer to specify the address.

 (6) afs_find_server(), afs_compare_fs_alists() and afs_merge_fs_addr[46]{}
     now do peer pointer comparison rather than address comparison.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Turn the afs_addr_list address array into an array of structs, thereby
allowing per-address (such as RTT) info to be added.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Add some comments on AFS abort code handling in the rotation algorithm and
adjust the errors produced to match.
Reported-by: Jeffrey E Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

rxrpc_find_service_conn_rcu() should make the "seq" counter odd on the
second pass, otherwise read_seqbegin_or_lock() never takes the lock.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20231117164846.GA10410@redhat.com/

David Howells says:

 (3) afs_check_validity().
 (4) afs_getattr().

     These are both pretty short, so your solution is probably good for them.
     That said, afs_vnode_commit_status() can spend a long time under the
     write lock - and pretty much every file RPC op returns a status update.

Change these functions to use read_seqbegin(). This simplifies the code
and doesn't change the current behaviour, the "seq" counter is always even
so read_seqbegin_or_lock() can never take the lock.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20231130115617.GA21584@redhat.com/

David Howells says:

 (5) afs_find_server().

     There could be a lot of servers in the list and each server can have
     multiple addresses, so I think this would be better with an exclusive
     second pass.

     The server list isn't likely to change all that often, but when it does
     change, there's a good chance several servers are going to be
     added/removed one after the other.  Further, this is only going to be
     used for incoming cache management/callback requests from the server,
     which hopefully aren't going to happen too often - but it is remotely
     drivable.

 (6) afs_find_server_by_uuid().

     Similarly to (5), there could be a lot of servers to search through, but
     they are in a tree not a flat list, so it should be faster to process.
     Again, it's not likely to change that often and, again, when it does
     change it's likely to involve multiple changes.  This can be driven
     remotely by an incoming cache management request but is mostly going to
     be driven by setting up or reconfiguring a volume's server list -
     something that also isn't likely to happen often.

Make the "seq" counter odd on the 2nd pass, otherwise read_seqbegin_or_lock()
never takes the lock.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20231130115614.GA21581@redhat.com/

David Howells says:

 (2) afs_lookup_volume_rcu().

     There can be a lot of volumes known by a system.  A thousand would
     require a 10-step walk and this is drivable by remote operation, so I
     think this should probably take a lock on the second pass too.

Make the "seq" counter odd on the 2nd pass, otherwise read_seqbegin_or_lock()
never takes the lock.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20231130115606.GA21571@redhat.com/

Automatically generate trace tag enums from the symbol -> string mapping
tables rather than having the enums as well, thereby reducing duplicated
data.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org

checkpatch objects to whitespace before ')', so remove most of it from the
afs trace header.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org

Pull x86 fixes from Ingo Molnar:

 - Fix a secondary CPUs enumeration regression caused by creative MADT
   APIC table entries on certain systems.

 - Fix a race in the NOP-patcher that can spuriously trigger crashes on
   bootup.

 - Fix a bootup failure regression caused by the parallel bringup code,
   caused by firmware inconsistency between the APIC initialization
   states of the boot and secondary CPUs, on certain systems.

* tag 'x86-urgent-2023-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/acpi: Handle bogus MADT APIC tables gracefully
  x86/alternatives: Disable interrupts and sync when optimizing NOPs in place
  x86/alternatives: Sync core before enabling interrupts
  x86/smpboot/64: Handle X2APIC BIOS inconsistency gracefully

Pull SCSI fixes from James Bottomley:
 "Four small fixes, three in drivers with the core one adding a batch
  indicator (for drivers which use it) to the error handler"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Let the sq_lock protect sq_tail_slot access
  scsi: ufs: qcom: Return ufs_qcom_clk_scale_*() errors in ufs_qcom_clk_scale_notify()
  scsi: core: Always send batch on reset or error handling command
  scsi: bnx2fc: Fix skb double free in bnx2fc_rcv()

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are some small bugfixes and new device ids for USB and
  Thunderbolt drivers for 6.7-rc7. Included in here are:

   - new usb-serial device ids

   - thunderbolt driver fixes

   - typec driver fix

   - usb-storage driver quirk added

   - fotg210 driver fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: option: add Quectel EG912Y module support
  USB: serial: ftdi_sio: update Actisense PIDs constant names
  usb: fotg210-hcd: delete an incorrect bounds test
  usb-storage: Add quirk for incorrect WP on Kingston DT Ultimate 3.0 G3
  usb: typec: ucsi: fix gpio-based orientation detection
  net: usb: ax88179_178a: avoid failed operations when device is disconnected
  USB: serial: option: add Quectel RM500Q R13 firmware support
  USB: serial: option: add Foxconn T99W265 with new baseline
  thunderbolt: Fix minimum allocated USB 3.x and PCIe bandwidth
  thunderbolt: Fix memory leak in margining_port_remove()

Pull char / misc driver fixes from Greg KH:
 "Here are a small number of various driver fixes for 6.7-rc7 that
  normally come through the char-misc tree, and one debugfs fix as well.

  Included in here are:

   - iio and hid sensor driver fixes for a number of small things

   - interconnect driver fixes

   - brcm_nvmem driver fixes

   - debugfs fix for previous fix

   - guard() definition in device.h so that many subsystems can start
     using it for 6.8-rc1 (requested by Dan Williams to make future
     merges easier)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  debugfs: initialize cancellations earlier
  Revert "iio: hid-sensor-als: Add light color temperature support"
  Revert "iio: hid-sensor-als: Add light chromaticity support"
  nvmem: brcm_nvram: store a copy of NVRAM content
  dt-bindings: nvmem: mxs-ocotp: Document fsl,ocotp
  driver core: Add a guard() definition for the device_lock()
  interconnect: qcom: icc-rpm: Fix peak rate calculation
  iio: adc: MCP3564: fix hardware identification logic
  iio: adc: MCP3564: fix calib_bias and calib_scale range checks
  iio: adc: meson: add separate config for axg SoC family
  iio: adc: imx93: add four channels for imx93 adc
  iio: adc: ti_am335x_adc: Fix return value check of tiadc_request_dma()
  interconnect: qcom: sm8250: Enable sync_state
  iio: triggered-buffer: prevent possible freeing of wrong buffer
  iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw
  iio: imu: adis16475: use bit numbers in assign_bit()
  iio: imu: adis16475: add spi_device_id table
  iio: tmag5273: fix temperature offset
  interconnect: Treat xlate() returning NULL node as an error
  iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time table
  ...

Pull input updates from Dmitry Torokhov:

 - a quirk to AT keyboard driver to skip issuing "GET ID" command when
   8042 is in translated mode and the device is a laptop/portable,
   because the "GET ID" command makes a bunch of recent laptops unhappy

 - a quirk to i8042 to disable multiplexed mode on Acer P459-G2-M which
   causes issues on resume

 - psmouse will activate native RMI4 protocol support for touchpad on
   ThinkPad L14 G1

 - addition of Razer Wolverine V2 ID to xpad gamepad driver

 - mapping for airplane mode button in soc_button_array driver for
   TUXEDO laptops

 - improved error handling in ipaq-micro-keys driver

 - amimouse being prepared for platform remove callback returning void

* tag 'input-for-v6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: soc_button_array - add mapping for airplane mode button
  Input: xpad - add Razer Wolverine V2 support
  Input: ipaq-micro-keys - add error handling for devm_kmemdup
  Input: amimouse - convert to platform remove callback returning void
  Input: i8042 - add nomux quirk for Acer P459-G2-M
  Input: atkbd - skip ATKBD_CMD_GETID in translated mode
  Input: psmouse - enable Synaptics InterTouch for ThinkPad L14 G1

This add a mapping for the airplane mode button on the TUXEDO Pulse Gen3.

While it is physically a key it behaves more like a switch, sending a key
down on first press and a key up on 2nd press. Therefor the switch event
is used here. Besides this behaviour it uses the HID usage-id 0xc6
(Wireless Radio Button) and not 0xc8 (Wireless Radio Slider Switch), but
since neither 0xc6 nor 0xc8 are currently implemented at all in
soc_button_array this not to standard behaviour is not put behind a quirk
for the moment.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20231215171718.80229-1-wse@tuxedocomputers.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull block fixes from Jens Axboe:
 "Just an NVMe pull request this time, with a fix for bad sleeping
  context, and a revert of a patch that caused some trouble"

* tag 'block-6.7-2023-12-22' of git://git.kernel.dk/linux:
  nvme-pci: fix sleeping function called from interrupt context
  Revert "nvme-fc: fix race between error recovery and creating association"

Pull kvm fixes from Paolo Bonzini:
"RISC-V:

   - Fix a race condition in updating external interrupt for
     trap-n-emulated IMSIC swfile

   - Fix print_reg defaults in get-reg-list selftest

  ARM:

   - Ensure a vCPU's redistributor is unregistered from the MMIO bus if
     vCPU creation fails

   - Fix building KVM selftests for arm64 from the top-level Makefile

  x86:

   - Fix breakage for SEV-ES guests that use XSAVES

  Selftests:

   - Fix bad use of strcat(), by not using strcat() at all"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SEV: Do not intercept accesses to MSR_IA32_XSS for SEV-ES guests
  KVM: selftests: Fix dynamic generation of configuration names
  RISCV: KVM: update external interrupt atomically for IMSIC swfile
  KVM: riscv: selftests: Fix get-reg-list print_reg defaults
  KVM: selftests: Ensure sysreg-defs.h is generated at the expected path
  KVM: Convert comment into an assertion in kvm_io_bus_register_dev()
  KVM: arm64: vgic: Ensure that slots_lock is held in vgic_register_all_redist_iodevs()
  KVM: arm64: vgic: Force vcpu vgic teardown on vcpu destroy
  KVM: arm64: vgic: Add a non-locking primitive for kvm_vgic_vcpu_destroy()
  KVM: arm64: vgic: Simplify kvm_vgic_destroy()

KVM/riscv fixes for 6.7, take #1

- Fix a race condition in updating external interrupt for
  trap-n-emulated IMSIC swfile
- Fix print_reg defaults in get-reg-list selftest

Merge tag 'kvmarm-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

KVM/arm64 fixes for 6.7, part #2

 - Ensure a vCPU's redistributor is unregistered from the MMIO bus
   if vCPU creation fails

 - Fix building KVM selftests for arm64 from the top-level Makefile

Pull printk fix from Petr Mladek:

 - Prevent refcount warning from code releasing a fwnode

* tag 'printk-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  lib/vsprintf: Fix %pfwf when current node refcount == 0

Pull sound fixes from Takashi Iwai:
 "Apparently there were so many kids wishing bug fixes that made Santa
  busy; here we have lots of fixes although it's a bit late. But all
  changes are device-specific, hence it should be relatively safe to
  apply.

  Most of changes are for Cirrus codecs (for both ASoC and HD-audio),
  while the remaining are fixes for TI codecs, HD-audio and USB-audio
  quirks"

* tag 'sound-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
  ALSA: hda: cs35l41: Only add SPI CS GPIO if SPI is enabled in kernel
  ALSA: hda: cs35l41: Do not allow uninitialised variables to be freed
  ASoC: fsl_sai: Fix channel swap issue on i.MX8MP
  ASoC: hdmi-codec: fix missing report for jack initial status
  ALSA: hda/realtek: Add quirks for ASUS Zenbook 2023 Models
  ALSA: hda: cs35l41: Support additional ASUS Zenbook 2023 Models
  ALSA: hda/realtek: Add quirks for ASUS Zenbook 2022 Models
  ALSA: hda: cs35l41: Support additional ASUS Zenbook 2022 Models
  ALSA: hda/realtek: Add quirks for ASUS ROG 2023 models
  ALSA: hda: cs35l41: Support additional ASUS ROG 2023 models
  ALSA: hda: cs35l41: Add config table to support many laptops without _DSD
  ASoC: Intel: bytcr_rt5640: Add new swapped-speakers quirk
  ASoC: Intel: bytcr_rt5640: Add quirk for the Medion Lifetab S10346
  kselftest: alsa: fixed a print formatting warning
  ALSA: usb-audio: Increase delay in MOTU M quirk
  ASoC: tas2781: check the validity of prm_no/cfg_no
  ALSA: hda/tas2781: select program 0, conf 0 by default
  ALSA: hda/realtek: Add quirk for ASUS ROG GV302XA
  ASoC: cs42l43: Don't enable bias sense during type detect
  ASoC: Intel: soc-acpi-intel-mtl-match: Change CS35L56 prefixes to AMPn
  ...

Pull i2c fixes from Wolfram Sang:

 - error path fixes (qcom-geni)

 - polling mode fix (rk3x)

 - target mode state machine fix (aspeed)

* tag 'i2c-for-6.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: aspeed: Handle the coalesced stop conditions with the start conditions.
  i2c: rk3x: fix potential spinlock recursion on poll
  i2c: qcom-geni: fix missing clk_disable_unprepare() and geni_se_resources_off()