- 30 Jan, 2019 25 commits
-
-
Xin Long authored
Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_default_sndinfo and check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_default_sndinfo, it's compatible with 0. SCTP_CURRENT_ASSOC is supported for SCTP_DEFAULT_SNDINFO in this patch. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_default_send_param and check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_default_send_param, it's compatible with 0. SCTP_CURRENT_ASSOC is supported for SCTP_DEFAULT_SEND_PARAM in this patch. Signed-off-by:
-
Xin Long authored
Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_delayed_ack and check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_delayed_ack, it's compatible with 0. SCTP_CURRENT_ASSOC is supported for SCTP_DELAYED_SACK in this patch. It also adds sctp_apply_asoc_delayed_ack() to make code more readable. Signed-off-by:
-
Xin Long authored
SCTP_STREAM_SCHEDULER_VALUE is a special one, as its value is not save in sctp_sock, but only in asoc. So only SCTP_CURRENT_ASSOC reserved assoc_id can be used in sctp_setsockopt_scheduler_value. This patch adds SCTP_CURRENT_ASOC support for SCTP_STREAM_SCHEDULER_VALUE. Signed-off-by:
-
Xin Long authored
Check with SCTP_FUTURE_ASSOC instead in sctp_set/getsockopt_reconfig_supported, it's compatible with 0. It also adjusts some code to keep a same check form as other functions. Signed-off-by:
-
Xin Long authored
Check with SCTP_FUTURE_ASSOC instead in sctp_set/getsockopt_reconfig_supported, it's compatible with 0. It also adjusts some code to keep a same check form as other functions. Signed-off-by:
-
Xin Long authored
Check with SCTP_FUTURE_ASSOC instead in sctp_set/getsockopt_pr_supported, it's compatible with 0. It also adjusts some code to keep a same check form as other functions. Signed-off-by:
-
Xin Long authored
Check with SCTP_FUTURE_ASSOC instead in sctp_set/getsockopt_paddr_thresholds, it's compatible with 0. It also adds pf_retrans in sctp_sock to support SCTP_FUTURE_ASSOC. Signed-off-by:
-
Xin Long authored
Check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_local_auth_chunks, it's compatible with 0. Signed-off-by:
-
Xin Long authored
Check with SCTP_FUTURE_ASSOC instead in sctp_set/getsockopt_maxseg, it's compatible with 0. Also check asoc_id early as other sctp setsockopts does. Signed-off-by:
-
Xin Long authored
Check with SCTP_FUTURE_ASSOC instead in sctp_set/getsockopt_associnfo, it's compatible with 0. Signed-off-by:
-
Xin Long authored
Check with SCTP_FUTURE_ASSOC instead in sctp_set/getsockopt_rtoinfo, it's compatible with 0. Signed-off-by:
-
Xin Long authored
Check with SCTP_FUTURE_ASSOC instead in sctp_/setgetsockopt_peer_addr_params, it's compatible with 0. Signed-off-by:
-
Xin Long authored
This patch is to add 3 constants SCTP_FUTURE_ASSOC, SCTP_CURRENT_ASSOC and SCTP_ALL_ASSOC for reserved assoc_ids, as defined in rfc6458#section-7.2. And add the process for them when doing lookup and inserting in sctp_id2assoc and sctp_assoc_set_id. Signed-off-by:
-
David S. Miller authored
Vasundhara Volam says: ==================== devlink: Add configuration parameters support for devlink_port This patchset adds support for configuration parameters setting through devlink_port. Each device registers supported configuration parameters table. The user can retrieve data on these parameters by "devlink port param show" command and can set new value to a parameter by "devlink port param set" command. All configuration modes supported by devlink_dev are supported by devlink_port also. Command examples and output: pci/0000:3b:00.0/0: name wake-on-lan type generic values: cmode permanent value false pci/0000:3b:00.1/1: name wake-on-lan type generic values: cmode permanent value false pci/0000:af:00.0/0: name wake-on-lan type generic values: cmode permanent value true pci/0000:3b:00.0/0: name wake-on-lan type generic values: cmode permanent value false There is difference of opinion on adding WOL parameter to devlink, between Jakub Kicinski and Michael Chan. Quote from Jakud Kicinski: ******** As explained previously I think it's a very bad idea to add existing configuration options to devlink, just because devlink has the ability to persist the setting in NVM. Especially that for WoL you have to get the link up so you potentially have all link config stuff as well. And that n-tuple filters are one of the WoL options, meaning we'd need the ability to persist n-tuple filters via devlink. The effort would be far better spent helping with migrating ethtool to netlink, and allowing persisting there. I have not heard any reason why devlink is a better fit. I can imagine you're just doing it here because it's less effort for you since ethtool is not yet migrated. ******** Quote from Michael Chan: ******** The devlink's WoL parameter is a persistent WoL parameter stored in the NIC's NVRAM. It is different from ethtool's WoL parameter in a number of ways. ethtool WoL is not persistent over AC power cycle and is considered OS-present WoL. As such, ethtool WoL can use a more sophisticated pattern including n-tuple with IP address in addition to the more basic types (e.g. magic packet). Whereas OS-absent power up WoL should only include magic packet and other simple types. The devlink WoL setting does not have to match the ethtool WoL setting. The card will autoneg up to the speed supported by Vaux so no special devlink link setting is needed. ******** Future expansion of WOL parameter to devlink: ******** Add an additional flag to support additional setting to address link settings. This will allow attributes to support both runtime and persistent configuration. ******** v7->v8: * Re-ordered function definitions. * Append with "Acked-by: Jiri Pirko <jiri@mellanox.com>" to first 3 patches. * Add missing devlink_port_param_driverinit_value_get() declaration. v6->v7: * Remove RFC tag from the patch-set. v5->v6: * Replace '-' with '*' in cover letter to avoid cutoff by git. v4->v5: * Added quotes from Jakub Kicinski and Michael chan on devlink's WOL parameter in the cover letter. v3->v4: * Update changes done from v2 to v3 version in individual patch descriptions. v2->v3: Make following changes as per suggestions from Jiri Pirko and Michal Kubecek. * Add a helper __devlink_params_register() with common code used by both devlink_params_register() and devlink_port_params_register(). * Define only WOL types used now and define them as bitfield, so that mutliple WOL types can be enabled upon power on. * Modify "wake-on-lan" name to "wake_on_lan" to be symmetric with previous definitions. * Rename DEVLINK_PARAM_WOL_XXX to DEVLINK_PARAM_WAKE_XXX to be symmetrical with ethtool WOL definitions. * Modify bnxt_dl_wol_validate(), to throw error message when user gives value other than DEVLINK_PARAM_WAKE_MAGIC or to disable WOL. * Use netdev_err() instead of netdev_warn(), when devlink_port_register() and devlink_port_params_register() returns error. Also, don't log rc in this message. v1->v2: Make following changes as per suggestions from Jiri Pirko. * Remove separate enum devlink_port_param_generic_id for port params. Instead club it with existing device params. Accordingly refactor remaining patchset. * Move INIT_LIST_HEAD of port param_list to devlink_port_register() * Add a helper devlink_param_verify() to be used for both devlink_params_register() and devlink_port_params_register(). * Add a helper __devlink_params_unregister() for common code in devlink_params_unregister() and devlink_port_params_unregister(). * Move DEVLINK_CMD_PORT_PARAM_XXX definitions to the end of the enum. * Split the patches for devlink_port_param_driverinit_value_get() and devlink_port_param_driverinit_value_set() into separate patches. * define DEVLINK_PARAM_GENERIC_ID_WOL type as u8 and define enum for different types of WOL. Accordingly modify bnxt_en patch to validate wol type. ==================== Signed-off-by: -
Vasundhara Volam authored
Register devlink_port with devlink and create initial port params table for bnxt_en. The table consists of a generic parameter: wake_on_lan: Enables Wake on Lan for this port when magic packet is received with this port's MAC address using ACPI pattern. If enabled, the controller asserts a wake pin upon reception of WoL packet. ACPI (Advanced Configuration and Power Interface) is an industry specification for the efficient handling of power consumption in desktop and mobile computers. v2->v3: - Modify bnxt_dl_wol_validate(), to throw error message when user gives value other than DEVLINK_PARAM_WAKE_MAGIC ot to disable WOL. - Use netdev_err() instead of netdev_warn(), when devlink_port_register() and devlink_port_params_register() returns error. Also, don't log rc in this message. Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
wake_on_lan - Enables Wake on Lan for this port. If enabled, the controller asserts a wake pin based on the WOL type. v2->v3: - Define only WOL types used now and define them as bitfield, so that mutliple WOL types can be enabled upon power on. - Modify "wake-on-lan" name to "wake_on_lan" to be symmetric with previous definitions. - Rename DEVLINK_PARAM_WOL_XXX to DEVLINK_PARAM_WAKE_XXX to be symmetrical with ethtool WOL definitions. Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Vasundhara Volam authored
Add notification call for devlink port param set, register and unregister functions. Add devlink_port_param_value_changed() function to enable the driver notify devlink on value change. Driver should use this function after value was changed on any configuration mode part to driverinit. v7->v8: Order devlink_port_param_value_changed() definitions followed by devlink_param_value_changed() Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Vasundhara Volam authored
Add support for "driverinit" configuration mode value for devlink_port configuration parameters. Add devlink_port_param_driverinit_value_set() function to help the driver set the value to devlink_port. Also, move the common code to __devlink_param_driverinit_value_set() to be used by both device and port params. v7->v8: Re-order the definitions as follows: __devlink_param_driverinit_value_get __devlink_param_driverinit_value_set devlink_param_driverinit_value_get devlink_param_driverinit_value_set devlink_port_param_driverinit_value_get devlink_port_param_driverinit_value_set Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Vasundhara Volam authored
Add support for "driverinit" configuration mode value for devlink_port configuration parameters. Add devlink_port_param_driverinit_value_get() function to help the driver get the value from devlink_port. Also, move the common code to __devlink_param_driverinit_value_get() to be used by both device and port params. v7->v8: -Add the missing devlink_port_param_driverinit_value_get() declaration. -Also, order devlink_port_param_driverinit_value_get() after devlink_param_driverinit_value_get/set() calls Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Vasundhara Volam authored
Add port param set command to set the value for a parameter. Value can be set to any of the supported configuration modes. v7->v8: Append "Acked-by: Jiri Pirko <jiri@mellanox.com>" Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Vasundhara Volam authored
Add port param get command which gets data per parameter. It also has option to dump the parameters data per port. v7->v8: Append "Acked-by: Jiri Pirko <jiri@mellanox.com>" Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Vasundhara Volam authored
Add functions to register and unregister for the driver supported configuration parameters table per port. v7->v8: - Order the definitions following way as suggested by Jiri. __devlink_params_register __devlink_params_unregister devlink_params_register devlink_params_unregister devlink_port_params_register devlink_port_params_unregister - Append with Acked-by: Jiri Pirko <jiri@mellanox.com>. v2->v3: - Add a helper __devlink_params_register() with common code used by both devlink_params_register() and devlink_port_params_register(). Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Need to save away the IV across tls async operations, from Dave Watson. 2) Upon successful packet processing, we should liberate the SKB with dev_consume_skb{_irq}(). From Yang Wei. 3) Only apply RX hang workaround on effected macb chips, from Harini Katakam. 4) Dummy netdev need a proper namespace assigned to them, from Josh Elsasser. 5) Some paths of nft_compat run lockless now, and thus we need to use a proper refcnt_t. From Florian Westphal. 6) Avoid deadlock in mlx5 by doing IRQ locking, from Moni Shoua. 7) netrom does not refcount sockets properly wrt. timers, fix that by using the sock timer API. From Cong Wang. 8) Fix locking of inexact inserts of xfrm policies, from Florian Westphal. 9) Missing xfrm hash generation bump, also from Florian. 10) Missing of_node_put() in hns driver, from Yonglong Liu. 11) Fix DN_IFREQ_SIZE, from Johannes Berg. 12) ip6mr notifier is invoked during traversal of wrong table, from Nir Dotan. 13) TX promisc settings not performed correctly in qed, from Manish Chopra. 14) Fix OOB access in vhost, from Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) MAINTAINERS: Add entry for XDP (eXpress Data Path) net: set default network namespace in init_dummy_netdev() net: b44: replace dev_kfree_skb_xxx by dev_consume_skb_xxx for drop profiles net: caif: call dev_consume_skb_any when skb xmit done net: 8139cp: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: macb: Apply RXUBR workaround only to versions with errata net: ti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: apple: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: amd8111e: replace dev_kfree_skb_irq by dev_consume_skb_irq net: alteon: replace dev_kfree_skb_irq by dev_consume_skb_irq net: tls: Fix deadlock in free_resources tx net: tls: Save iv in tls_rec for async crypto requests vhost: fix OOB in get_rx_bufs() qed: Fix stack out of bounds bug qed: Fix system crash in ll2 xmit qed: Fix VF probe failure while FLR qed: Fix LACP pdu drops for VFs qed: Fix bug in tx promiscuous mode settings net: i825xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles netfilter: ipt_CLUSTERIP: fix warning unused variable cn ...
-
- 29 Jan, 2019 15 commits
-
-
Jesper Dangaard Brouer authored
Add multiple people as maintainers for XDP, sorted alphabetically. XDP is also tied to driver level support and code, but we cannot add all drivers to the list. Instead K: and N: match on 'xdp' in hope to catch some of those changes in drivers. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Josh Elsasser authored
Assign a default net namespace to netdevs created by init_dummy_netdev(). Fixes a NULL pointer dereference caused by busy-polling a socket bound to an iwlwifi wireless device, which bumps the per-net BUSYPOLLRXPACKETS stat if napi_poll() received packets: BUG: unable to handle kernel NULL pointer dereference at 0000000000000190 IP: napi_busy_loop+0xd6/0x200 Call Trace: sock_poll+0x5e/0x80 do_sys_poll+0x324/0x5a0 SyS_poll+0x6c/0xf0 do_syscall_64+0x6b/0x1f0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 7db6b048 ("net: Commonize busy polling code to focus on napi_id instead of socket") Signed-off-by:Josh Elsasser <jelsasser@appneta.com> Signed-off-by:
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; instance = kvzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kvzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; instance = kvzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kvzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: -
Yang Wei authored
The skb should be freed by dev_consume_skb_any() in b44_start_xmit() when bounce_skb is used. The skb is be replaced by bounce_skb, so the original skb should be consumed(not drop). dev_consume_skb_irq() should be called in b44_tx() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by:
Yang Wei <yang.wei9@zte.com.cn> Signed-off-by:
-
Yang Wei authored
The skb shouled be consumed when xmit done, it makes drop profiles (dropwatch, perf) more friendly. dev_kfree_skb_irq()/kfree_skb() shouled be replaced by dev_consume_skb_any(), it makes code cleaner. Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called in cp_tx() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by:
-
Arjun Vynipadath authored
Vishal Kulkarni will be the new maintainer for Chelsio cxgb3/cxgb4 drivers. Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
-
Arjun Vynipadath authored
It's possible that the basic port information could have changed since we first read it. Signed-off-by:
-
Harini Katakam authored
The interrupt handler contains a workaround for RX hang applicable to Zynq and AT91RM9200 only. Subsequent versions do not need this workaround. This workaround unnecessarily resets RX whenever RX used bit read is observed, which can be often under heavy traffic. There is no other action performed on RX UBR interrupt. Hence introduce a CAPS mask; enable this interrupt and workaround only on affected versions. Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Signed-off-by:
-
Veerasenareddy Burru authored
Fixed the code that was incorrectly interpreting the rx checksum validation status from hardware, and updating kernel that the packet arrived with correct checksum though the packet arrived with incorrect checksum and hardware also indicated checksum is not correct. Signed-off-by:
Veerasenareddy Burru <vburru@marvell.com> Acked-by:
Derek Chickles <dchickles@marvell.com> Signed-off-by:
Felix Manlunas <fmanlunas@marvell.com> Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called in cpmac_end_xmit() when xmit done. It makes drop profiles more friendly. Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called in bmac_txdma_intr() when xmit done. It makes drop profiles more friendly. Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called in amd8111e_tx() when xmit done. It makes drop profiles more friendly. Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called in ace_tx_int() when xmit done. It makes drop profiles more friendly. Signed-off-by:
-
