- 01 Oct, 2006 33 commits
-
-
Josef 'Jeff' Sipek authored
MBCS: Use SEEK_{SET,CUR,END} instead of hardcoded values Signed-off-by:Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Alan Cox authored
If we can clean up these remainders we can finally delete pci_find_* Signed-off-by:
Alan Cox <alan@redhat.com> Cc: Greg KH <greg@kroah.com> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Alan Cox authored
Mirrors the drivers/ata version, hold a reference to the host bridge while we are doing setup. Signed-off-by:
-
Alan Cox authored
As we don't support hotplug we end up leaking an isa_dev reference which if unload was ever added we would drop at the end of unloading. This is fine because we do genuinely need the isa_dev pointer until unload. Signed-off-by:
-
Alan Cox authored
Simple conversion Signed-off-by:
-
Alan Cox authored
Fairly trivial change in this case Signed-off-by:
-
Alan Cox authored
pci_find_device is not refcounting and should be getting killed off. Signed-off-by:
-
Ross Biro authored
The driver for /proc/config.gz consumes rather a lot of memory and it is in fact possible to build it as a module. In some ways this is a bit risky, because the .config which is used for compiling kernel/configs.c isn't necessarily the same as the .config which was used to build vmlinux. But OTOH the potential memory savings are decent, and it'd be fairly dumb to build your configs.o with a different .config. Signed-off-by:
Andrew Morton <akpm@google.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Cal Peake authored
Fix up kernel/sys.c to be consistent with CodingStyle and the rest of the file. Signed-off-by:
Cal Peake <cp@absolutedigital.net> Signed-off-by:
-
Alan Cox authored
Stop some other people peering into the baud bits on their own and make them use the tty_get_baud_rate() helper as a preperation for the move to the new termios. Corrected dependancy previous one had on new termios structs Signed-off-by:
-
Mike Miller (OS Dev) authored
Add support for logical volumes >2TB. All SAS/SATA controllers support large volumes. Signed-off-by:
Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by:
-
Alexey Dobriyan authored
* fs/open.c is getting bit crowdy * preparation to lutimes(2) Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Alexey Dobriyan authored
One of idiomatic ways to duplicate a region of memory is dst = kmalloc(len, GFP_KERNEL); if (!dst) return -ENOMEM; memcpy(dst, src, len); which is neat code except a programmer needs to write size twice. Which sometimes leads to mistakes. If len passed to kmalloc is smaller that len passed to memcpy, it's straight overwrite-beyond-end. If len passed to memcpy is smaller than len passed to kmalloc, it's either a) legit behaviour ;-), or b) cloned buffer will contain garbage in second half. Slight trolling of commit lists shows several duplications bugs done exactly because of diverged lenghts: Linux: [CRYPTO]: Fix memcpy/memset args. [PATCH] memcpy/memset fixes OpenBSD: kerberosV/src/lib/asn1: der_copy.c:1.4 If programmer is given only one place to play with lengths, I believe, such mistakes could be avoided. With kmemdup, the snippet above will be rewritten as: dst = kmemdup(src, len, GFP_KERNEL); if (!dst) return -ENOMEM; This also leads to smaller code (kzalloc effect). Quick grep shows 200+ places where kmemdup() can be used. Signed-off-by:
-
Takashi Iwai authored
Add maximum latency tracking to the ALSA subsystem for PCM playback. In ALSA, the playback application controls the buffer size and thus indirectly the period of latency that it can deal with. This patch uses 75% of the total available latency as threshold to announce to the latency subsystem; While 75% is a crude heuristic it's a quite reasonable one; the remaining 25% can be used for all driver processing for the next samples which is also proportional to the size of the buffer. With ogg123 a latency setting of about 4msec was seen (at 44Khz), while with the "play" command a much longer maximum tolerable latency was seen. Other, more multimedia oriented players as well as games, will have a lot smaller buffers to allow better synchronization and those will actually get into the latency domains where there is impact on the power management rules. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Arjan van de Ven authored
Add infrastructure to track "maximum allowable latency" for power saving policies. The reason for adding this infrastructure is that power management in the idle loop needs to make a tradeoff between latency and power savings (deeper power save modes have a longer latency to running code again). The code that today makes this tradeoff just does a rather simple algorithm; however this is not good enough: There are devices and use cases where a lower latency is required than that the higher power saving states provide. An example would be audio playback, but another example is the ipw2100 wireless driver that right now has a very direct and ugly acpi hook to disable some higher power states randomly when it gets certain types of error. The proposed solution is to have an interface where drivers can * announce the maximum latency (in microseconds) that they can deal with * modify this latency * give up their constraint and a function where the code that decides on power saving strategy can query the current global desired maximum. This patch has a user of each side: on the consumer side, ACPI is patched to use this, on the producer side the ipw2100 driver is patched. A generic maximum latency is also registered of 2 timer ticks (more and you lose accurate time tracking after all). While the existing users of the patch are x86 specific, the infrastructure is not. I'd like to ask the arch maintainers of other architectures if the infrastructure is generic enough for their use (assuming the architecture has such a tradeoff as concept at all), and the sound/multimedia driver owners to look at the driver facing API to see if this is something they can use. [akpm@osdl.org: cleanups] Signed-off-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
Jesse Barnes <jesse.barnes@intel.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by:
-
Richard Knutsson authored
Conversion of booleans to: generic-boolean.patch (2006-08-23) Signed-off-by:
Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by:
-
Richard Knutsson authored
Conversion of booleans to: generic-boolean.patch (2006-08-23) Signed-off-by:
-
Richard Knutsson authored
Conversion of booleans to: generic-boolean.patch (2006-08-23) Signed-off-by:
Anton Altaparmakov <aia21@cantab.net> Signed-off-by:
-
Richard Knutsson authored
This patch defines: * a generic boolean-type, named 'bool' * aliases to 0 and 1, named 'false' and 'true' Removing colliding definitions of 'bool', 'false' and 'true'. Signed-off-by:
-
Andrew Morton authored
- Add soothing comment - uninline thrice-called function Cc: OGAWA Hirofumi <hogawa@miraclelinux.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Keith Mannthey authored
The api for hot-add memory already has a construct for finding nodes based on an address, memory_add_physaddr_to_nid. This patch allows the fucntion to do something besides return 0. It uses the nodes_add infomation to lookup to node info for a hot add event. Signed-off-by:
Keith Mannthey <kmannth@us.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Keith Mannthey authored
Migate CONFIG_MEMORY_HOTPLUG to CONFIG_MEMORY_HOTPLUG_SPARSE where needed. Signed-off-by:
-
Keith Mannthey authored
In cases where the acpi memory-add event does not containe the pxm (node) infomation allow the driver to look up node info based on the address. The acpi_get_node call returns -1 if it can't decode the pxm info, this causes add_memory to panic. acpi_get_node would have to decode the resource from the handle (a lenghty proposition). This seems to be the cleanist point to interject the hook. [kamezawa.hiroyu@jp.fujitsu.com: build fixes] [y-goto@jp.fujitsu.com: build fixes] Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by:
-
Keith Mannthey authored
The api for hot-add memory already has a construct for finding nodes based on an address, memory_add_physaddr_to_nid. This patch allows the fucntion to do something besides return 0. It uses the nodes_add infomation to lookup to node info for a hot add event. Signed-off-by:
-
Keith Mannthey authored
Enable x86_64 srat.c to share code between both reserve and sparsemem based add memory paths. Both paths need the hot-add area node locality infomration (nodes_add). This code refactors the code path to allow this. Signed-off-by:
-
Keith Mannthey authored
Create Kconfig namespace for MEMORY_HOTPLUG_RESERVE and MEMORY_HOTPLUG_SPARSE. This is needed to create a disticiton between the 2 paths. Selecting the high level opiton of MEMORY_HOTPLUG will get you MEMORY_HOTPLUG_SPARSE if you have sparsemem enabled or MEMORY_HOTPLUG_RESERVE if you are x86_64 with discontig and ACPI numa support. Signed-off-by:
-
Keith Mannthey authored
Fix up externs in memory_hotplug.c. Cleanup. Signed-off-by:
-
Alan Cox authored
This fixes two things Firstly someone mistakenly used "errata" for the singular. This causes Dave Woodhouse to emit diagnostics whenever the string is read, and so should be fixed. Secondly the AMD AGP tunnel has an erratum which causes hangs if you try and do direct PCI to AGP transfers in some cases. We have a flag for PCI/PCI failures but we need a different flag for this really as in this case we don't want to stop PCI/PCI transfers using things like IOAT and the new RAID offload work. I'll post some updates to make proper use of the PCIAGP flag in the media/video drivers to Mauro. Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Gavin Lambert authored
Don't try and give NULL to fput() in the error handling in do_mmap_pgoff() as it'll cause an oops. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Andrew Morton authored
These two BUG_ON()s are redundant and undesired: we're checking for this condition further on in the function, only better. Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Jeff Garzik authored
The ->flags in struct request was split into two variables, in a recent changeset. The merge of this change forgot to update SCSI's libsas, probably because libsas was a very recent merge. Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
device_reprobe() should return an error code. When it does so, scsi_device_reprobe() should propagate it back. Acked-by:
James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by:
-
- 30 Sep, 2006 7 commits
-
-
git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
* 'block' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] Only enable CONFIG_BLOCK option for embedded
-
Jens Axboe authored
It's too easy for people to shoot themselves in the foot, and it only makes sense for embedded folks anyway. Signed-off-by:Jens Axboe <axboe@kernel.dk>
-
git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
* 'block' of git://brick.kernel.dk/data/git/linux-2.6-block: (67 commits) [PATCH] blk_queue_start_tag() shared map race fix [PATCH] Update axboe@suse.de email address [PATCH] fix creating zero sized bio mempools in low memory system [PATCH] CONFIG_BLOCK: blk_congestion_wait() fix [PATCH] CONFIG_BLOCK internal.h cleanups [PATCH] BLOCK: Make USB storage depend on SCSI rather than selecting it [try #6] [PATCH] BLOCK: Make it possible to disable the block layer [try #6] [PATCH] BLOCK: Remove no-longer necessary linux/buffer_head.h inclusions [try #6] [PATCH] BLOCK: Remove no-longer necessary linux/mpage.h inclusions [try #6] [PATCH] BLOCK: Move the msdos device ioctl compat stuff to the msdos driver [try #6] [PATCH] BLOCK: Move the Ext3 device ioctl compat stuff to the Ext3 driver [try #6] [PATCH] BLOCK: Move the Ext2 device ioctl compat stuff to the Ext2 driver [try #6] [PATCH] BLOCK: Move the ReiserFS device ioctl compat stuff to the ReiserFS driver [try #6] [PATCH] BLOCK: Move common FS-specific ioctls to linux/fs.h [try #6] [PATCH] BLOCK: Move the loop device ioctl compat stuff to the loop driver [try #6] [PATCH] BLOCK: Move __invalidate_device() to block_dev.c [try #6] [PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] [PATCH] BLOCK: Remove dependence on existence of blockdev_superblock [try #6] [PATCH] BLOCK: Move extern declarations out of fs/*.c into header files [try #6] [PATCH] BLOCK: Don't call block_sync_page() from AFS [try #6] ...
-
Jens Axboe authored
If we share the tag map between two or more queues, then we cannot use __set_bit() to set the bit. In fact we need to make sure we atomically acquire this tag, so loop using test_and_set_bit() to protect from that. Noticed by Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: -
Jens Axboe authored
As people often look for the copyright in files to see who to mail, update the link to a neutral one. Signed-off-by: -
Milan Broz authored
In the very low memory systems is in the init_bio call scale parameter set to zero and it leads to creating zero sized mempool. This patch prevents pool_entries parameter become zero, so the created pool have at least 1 entry. Mempool with 0 entries lead to incorrect behaviour of mempool_free. (Alloc requests are not waken up and system stalls in mempool_alloc->ioschedule). Signed-off-by:
Milan Broz <mbroz@redhat.com> Signed-off-by:
-
Andrew Morton authored
Don't just do nothing: it'll cause busywaits all over writeback and page reclaim. For now, take a fixed-length nap. Will improve when NFS starts waking up throttled processes. Signed-off-by:
-
