- 19 Sep, 2006 5 commits
-
-
Alan Cox authored
Our ATA probe code checks that a device is not reporting a diagnostic failure during start up. Unfortunately at least one device seems to like doing this - the Gigabyte iRAM. This is only done for the master right now (which is fine for the iRAM as it is SATA), as with PATA some combinations of ATAPI device seem to fool the check into seeing a drive that isn't there if it is applied to the slave. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
-
Tejun Heo authored
Non-uniform ports handling got broken while updating libata to handle those in the same host. Only separate irq for the non-uniform secondary port was implemented while all other fields (host flags, transfer mode...) of the secondary port simply shared those of the first. For ata_piix combined mode, which ATM is the only user of non-uniform ports, this causes the secondary port assume the wrong type. This can cause PATA port to use SATA ops, which results in bogus check on PCS and detection failure. This patch adds ata_probe_ent->pinfo2 which points to optional port_info for the secondary port. For the time being, this seems to be the simplest solution. This workaround will be removed together with ata_probe_ent itself after init model is updated to allow more flexibility. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Nelson A. de Oliveira <naoliv@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
Conflicts: drivers/ata/libata-sff.c
-
Arnaud Patard authored
When the libata is trying to handle legacy ide ports (0x1f0 for instance), it doesn't take care if the resource has childs or not. The result is that this situation : 0100-01fe : pnp 00:09 0170-0177 : libata 01f0-01f7 : libata is seen as conflict, which is wrong. The proposed fix is to detect childs and in this case, look at which child is conflicting. Signed-off-by: Arnaud Patard <apatard@mandriva.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
- 18 Sep, 2006 27 commits
-
-
Linus Torvalds authored
(And reset it on new thread creation) It turns out that eflags is important to save and restore not just because of iopl, but due to the magic bits like the NT bit, which we don't want leaking between different threads. Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [ATM] CLIP: Do not refer freed skbuff in clip_mkip(). [NET]: Drop tx lock in dev_watchdog_up [PACKET]: Don't truncate non-linear skbs with mmaped IO [NET]: Mark frame diverter for future removal. [NETFILTER]: Add secmark headers to header-y [ATM]: linux-atm-general mailing list is subscribers only [ATM]: [he] when transmit fails, unmap the dma regions [TCP] tcp-lp: update information to MAINTAINERS [TCP] tcp-lp: bug fix for oops in 2.6.18-rc6 [BRIDGE]: random extra bytes on STP TCN packet [IPV6]: Accept -1 for IPV6_TCLASS [IPV6]: Fix tclass setting for raw sockets. [IPVS]: remove the debug option go ip_vs_ftp [IPVS]: Make sure ip_vs_ftp ports are valid [IPVS]: auto-help for ip_vs_ftp [IPVS]: Document the ports option to ip_vs_ftp in kernel-parameters.txt [TCP]: Turn ABC off. [NEIGH]: neigh_table_clear() doesn't free stats
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: Fix regression in sys_getdomainname() [OPENPROMIO]: Handle current_node being NULL correctly.
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3815/1: headers_install support for ARM [ARM] 3794/1: S3C24XX: do not defined set_irq_wake when no CONFIG_PM [ARM] 3793/1: S3C2412: fix wrong serial info struct [ARM] 3780/1: Fix iop321 cpuid [ARM] 3786/1: pnx4008: update defconfig [ARM] 3785/1: S3C2412: Fix idle code as default uses wrong clocks [ARM] 3784/1: S3C2413: fix config for MACH_S3C2413/MACH_SMDK2413
-
Ralph Siemsen authored
Move kernel-only #includes into #ifdef __KERNEL__, so that headers_install target can be used on ARM. Signed-off-by: Ralph Siemsen <ralphs@netwinder.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Andy Walker authored
This patch corrects the buffer length checking in the sys_getdomainname() implementation for sparc/sparc64. Signed-off-by: Andy Walker <andy@puszczka.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki authored
In clip_mkip(), skb->dev is dereferenced after clip_push(), which frees up skb. Advisory: AD_LAB-06009 (<adlab@venustech.com.cn>). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Dooks authored
Patch from Ben Dooks Do not define set_irq_wake as a real function if the CONFIG_PM option is not set. Fixes bug reported by Thomas Gleixner. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Ben Dooks authored
Patch from Ben Dooks The S3C2440 serial info struct is being passed through the S3C2412 serial info struct probe routine. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Thomas Glexiner <tglx@linutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
David S. Miller authored
If the user tries to traverse to the next node of the last node, we get NULL in current_node and a zero phandle returned. That's fine, but if the user tries to obtain properties in that state, we try to dereference a NULL pointer in the downcall to the of_*() routines. So protect against that. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
Fix lockdep warning with GRE, iptables and Speedtouch ADSL, PPP over ATM. On Sat, Sep 02, 2006 at 08:39:28PM +0000, Krzysztof Halasa wrote: > > ======================================================= > [ INFO: possible circular locking dependency detected ] > ------------------------------------------------------- > swapper/0 is trying to acquire lock: > (&dev->queue_lock){-+..}, at: [<c02c8c46>] dev_queue_xmit+0x56/0x290 > > but task is already holding lock: > (&dev->_xmit_lock){-+..}, at: [<c02c8e14>] dev_queue_xmit+0x224/0x290 > > which lock already depends on the new lock. This turns out to be a genuine bug. The queue lock and xmit lock are intentionally taken out of order. Two things are supposed to prevent dead-locks from occuring: 1) When we hold the queue_lock we're supposed to only do try_lock on the tx_lock. 2) We always drop the queue_lock after taking the tx_lock and before doing anything else. > > the existing dependency chain (in reverse order) is: > > -> #1 (&dev->_xmit_lock){-+..}: > [<c012e7b6>] lock_acquire+0x76/0xa0 > [<c0336241>] _spin_lock_bh+0x31/0x40 > [<c02d25a9>] dev_activate+0x69/0x120 This path obviously breaks assumption 1) and therefore can lead to ABBA dead-locks. I've looked at the history and there seems to be no reason for the lock to be held at all in dev_watchdog_up. The lock appeared in day one and even there it was unnecessary. In fact, people added __dev_watchdog_up precisely in order to get around the tx lock there. The function dev_watchdog_up is already serialised by rtnl_lock since its only caller dev_activate is always called under it. So here is a simple patch to remove the tx lock from dev_watchdog_up. In 2.6.19 we can eliminate the unnecessary __dev_watchdog_up and replace it with dev_watchdog_up. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Non-linear skbs are truncated to their linear part with mmaped IO. Fix by using skb_copy_bits instead of memcpy. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
The code for frame diverter is unmaintained and has bitrotted. The number of users is very small and the code has lots of problems. If anyone is using it, they maybe exposing themselves to bad packet attacks. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
James Morris authored
This patch includes xt_SECMARK.h and xt_CONNSECMARK.h to the kernel headers which are exported via 'make headers_install'. This is needed to allow userland code to be built correctly with these features. Please apply, and consider for inclusion with 2.6.18 as a bugfix. Signed-off-by: James Morris <jmorris@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roland Dreier authored
As the automated reply I got to my last ATM patch shows, the linux-atm-general mailing list is subscribers-only. Signed-off-by: Roland Dreier <roland@digitalvampire.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chas Williams authored
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wong Hoi Sing Edison authored
Signed-off-by: Wong Hoi Sing Edison <hswong3i@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wong Hoi Sing Edison authored
Sorry that the patch submited yesterday still contain a small bug. This version have already been test for hours with BT connections. The oops is now difficult to reproduce. Signed-off-by: Wong Hoi Sing Edison <hswong3i@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
We seem to send 3 extra bytes in a TCN, which will be whatever happens to be on the stack. Thanks to Aji_Srinivas@emc.com for seeing. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Remi Denis-Courmont authored
This patch should add support for -1 as "default" IPv6 traffic class, as specified in IETF RFC3542 §6.5. Within the kernel, it seems tclass < 0 is already handled, but setsockopt, getsockopt and recvmsg calls won't accept it from userland. Signed-off-by: Remi Denis-Courmont <rdenis@simphalempin.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki authored
np->cork.tclass is used only in cork'ed context. Otherwise, np->tclass should be used. Bug#7096 reported by Remi Denis-Courmont <rdenis@simphalempin.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Simon Horman authored
This patch makes the debuging behaviour of this code more consistent with the rest of IPVS. Signed-Off-By: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Simon Horman authored
I'm not entirely sure what happens in the case of a valid port, at best it'll be silently ignored. This patch ignores them a little more verbosely. Signed-Off-By: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Simon Horman authored
Fill in a help message for the ports option to ip_vs_ftp Signed-Off-By: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Simon Horman authored
I'm not sure if documenting this here is appropriate, but if it is, here is some text to put there. Signed-Off-By: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Turn Appropriate Byte Count off by default because it unfairly penalizes applications that do small writes. Add better documentation to describe what it is so users will understand why they might want to turn it on. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Korotaev authored
neigh_table_clear() doesn't free tbl->stats. Found by Alexey Kuznetsov. Though Alexey considers this leak minor for mainstream, I still believe that cleanup code should not forget to free some of the resources :) At least, this is critical for OpenVZ with virtualized neighbour tables. Signed-Off-By: Kirill Korotaev <dev@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 17 Sep, 2006 8 commits
-
-
Jeff Garzik authored
-
Frank Pavlic authored
[PATCH 9/9] s390: qeth driver fixes [6/6] From: Frank Pavlic <fpavlic@de.ibm.com> - Hipersockets has no IPV6 support, thus prevent issueing SETRTG_IPV6 control commands on Hipersockets devices. - fixed error handling in qeth_sysfs_(un)register Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Frank Pavlic authored
[PATCH 8/9] s390: qeth driver fixes [5/6] From: Frank Pavlic <fpavlic@de.ibm.com> fix kernel panic in qdio queue handling. qeth_qdio_clear_card() could be invoked by 2 CPUs simultaneously (for example reboot event and recovery). Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Frank Pavlic authored
[PATCH 7/9] s390: qeth driver fixes [4/6] From: Frank Pavlic <fpavlic@de.ibm.com> - fix kernel crash due to race, set card->state to SOFTSETUP after card and card->dev are initialized properly. - remove CONFIG_QETH_PERF_STATS, use sysfs attribute instead, as we want to have the ability to turn on/off the statistics at runtime. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Frank Pavlic authored
[PATCH 6/9] s390: qeth driver fixes [3/6] From: Frank Pavlic <fpavlic@de.ibm.com> fixed kernel panic caused by qeth driver: Using a bonding device qeth driver will realloc headroom for every skb coming from the bond device. Once this happens qeth frees the original skb and set the skb pointer to the new realloced skb. Under heavy transmit workload (e.g.UDP streams) through bond network device the qdio output queue might get full. In this case we return with EBUSY from qeth_send_packet. Returning to qeth_hard_start_xmit routine the skb address on the stack still points to the old address, which has been freed before. Returning from qeth_hard_start_xmit with EBUSY results in requeuing the skb. In this case it corrupts the qdisc queue and results in kernel panic. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Frank Pavlic authored
[PATCH 5/9] s390: qeth driver fixes [2/6] From: Frank Pavlic <fpavlic@de.ibm.com> - fixed error handling in create_device_attributes - fixed some minor bugs in IPv4 and IPv6 address checking Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Frank Pavlic authored
[PATCH 4/9] s390: qeth driver fixes [1/6] From: Frank Pavlic <fpavlic@de.ibm.com> - Drop incoming packets with vlan_tag set if card->vlangrp is not set. - use always vlan_hwaccel_rx to pass vlan frames to the stack. - fix recovery problem. Device was recovered properly but still not working. netif_carrier_on call right before recovery start fixes it. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Frank Pavlic authored
[PATCH 3/9] s390: Makefile cleanup From: Frank Pavlic <fpavlic@de.ibm.com> remove CONFIG_MPC from Makefile which was introduced accidently in the past. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-