- 11 Jan, 2015 1 commit
-
-
Peter Griffin authored
Based on Arnds review comments here https://lkml.org/lkml/2014/11/13/161, update the phy driver to not use the reg property to access the sysconfig register offsets. This is because other phy's (miphy28, miphy365) have a combination of memory mapped registers and sysconfig control regs, and we shouldn't be mixing address spaces in the reg property. In addition we would ideally like the sysconfig offsets to be passed via DT in a uniform way. This new method will also allow us to support devices which have sysconfig registers in different banks more easily and it is also analagous to how keystone and bcm7745 platforms pass there syscon offsets in DT. This breaks DT compatibility, but this platform is considered WIP, and is only used by a few developers who are upstreaming support for it. Signed-off-by:
Peter Griffin <peter.griffin@linaro.org> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 09 Jan, 2015 20 commits
-
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Included changes: - remove useless return in void functions - remove unused member 'primary_iface' from 'struct orig_node' - improve existing kernel doc - fix several checkpatch complaints - ensure socket's control block is cleared for received skbs - add missing DEBUG_FS dependency to BATMAN_ADV_DEBUG symbol Signed-off-by: -
Praveen Madhavan authored
This patch fixes removes older means of upgrading Firmware using MAJOR version and adds newer interface version checking mechanism. Please apply this patch on net-next since it depends on previous commits. Signed-off-by:
Praveen Madhavan <praveenm@chelsio.com> Signed-off-by:
-
Fabio Estevam authored
As 456062b3 ("ARM: imx: add FEC sleep mode callback function") has been reverted, also revert the dts part. This reverts commit 07b4d2dd ("ARM: dts: imx6qdl: enable FEC magic-packet feature"). Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Fabio Estevam authored
i.MX platform maintainer Shawn Guo is not happy with the such commit as explained below [1]: "The GPR difference between SoCs can be encoded in device tree as well. It's pointless to repeat the same code pattern for every single platform, that need to set up GPR bits for enabling magic packet wake up, while the only difference is the register and bit offset. The platform code will become quite messy and unmaintainable if every device driver dump their GPR register setup code into platform. Sorry, but it's NACK from me." This reverts commit 456062b3 ("ARM: imx: add FEC sleep mode callback function"). [1] http://www.spinics.net/lists/netdev/msg310922.htmlSigned-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Florian Westphal authored
Delay update of hw tail descriptor if we know that another skb is going to be sent. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
David S. Miller authored
Ying Xue says: ==================== Involve rhashtable_lookup_insert routine The series aims to involve rhashtable_lookup_insert() to guarantee that the process of lookup and insertion of an object from/into hash table is finished atomically, allowing rhashtable's users not to introduce an extra lock during search and insertion. For example, tipc socket is the first user benefiting from this enhancement. v2 changes: - fix the issue of waking up worker thread under a wrong condition in patch #2, which is pointed by Thomas. - move a comment from rhashtable_inser() to rhashtable_wakeup_worker() according to Thomas's suggestion in patch #2. - indent the third line of condition statement in rhashtable_wakeup_worker() to inner bracket in patch #2. - drop patch #3 of v1 series - fix an issue of being unable to remove an object from hash table in certain special case in patch #4. - involve a new patch #5 to avoid unnecessary wakeup for worker queue thread - involve a new patch #6 to initialize atomic "nelems" variable - adjust "nelem_hint" value from 256 to 192 avoiding to unnecessarily to shrink hash table from the beginning phase in patch #7. v1 changes: But before rhashtable_lookup_insert() is involved, the following optimizations need to be first done: - simplify rhashtable_lookup by reusing rhashtable_lookup_compare() - introduce rhashtable_wakeup_worker() to further reduce duplicated code in patch #2 - fix an issue in patch #3 - involve rhashtable_lookup_insert(). But in this version, we firstly use rhashtable_lookup() to search duplicate key in both old and new bucket table; secondly introduce another __rhashtable_insert() helper function to reduce the duplicated code between rhashtable_insert() and rhashtable_lookup_insert(). - add patch #5 into the series as it depends on above patches. But in this version, no change is made comparing with its previous version. ==================== Signed-off-by: -
Ying Xue authored
As tipc reference table is statically allocated, its memory size requested on stack initialization stage is quite big even if the maximum port number is just restricted to 8191 currently, however, the number already becomes insufficient in practice. But if the maximum ports is allowed to its theory value - 2^32, its consumed memory size will reach a ridiculously unacceptable value. Apart from this, heavy tipc users spend a considerable amount of time in tipc_sk_get() due to the read-lock on ref_table_lock. If tipc reference table is converted with generic rhashtable, above mentioned both disadvantages would be resolved respectively: making use of the new resizable hash table can avoid locking on the lookup; smaller memory size is required at initial stage, for example, 256 hash bucket slots are requested at the beginning phase instead of allocating the entire 8191 slots in old mode. The hash table will grow if entries exceeds 75% of table size up to a total table size of 1M, and it will automatically shrink if usage falls below 30%, but the minimum table size is allowed down to 256. Also converts ref_table_lock to a separate mutex to protect hash table mutations on write side. Lastly defers the release of the socket reference using call_rcu() to allow using an RCU read-side protected call to rhashtable_lookup(). Signed-off-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Erik Hugne <erik.hugne@ericsson.com> Cc: Thomas Graf <tgraf@suug.ch> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Ying Xue authored
Signed-off-by:
-
Ying Xue authored
Move condition statements of verifying whether hash table size exceeds its maximum threshold or reaches its minimum threshold from resizing functions to resizing decision functions, avoiding unnecessary wakeup for worker queue thread. Signed-off-by:
-
Ying Xue authored
When remove an object from hash table, we currently only traverse old bucket table to check whether the object exists. If the object is not found in it, we will try again. But in the second search loop, we still search the object from the old table instead of future table. As a result, the object may be not removed from hash table especially when resizing is currently in progress and the object is just saved in the future table. Signed-off-by:
-
Ying Xue authored
Involve a new function called rhashtable_lookup_insert() which makes lookup and insertion atomic under bucket lock protection, helping us avoid to introduce an extra lock when we search and insert an object into hash table. Signed-off-by:
-
Ying Xue authored
Introduce rhashtable_wakeup_worker() helper function to reduce duplicated code where to wake up worker. By the way, as long as the both "future_tbl" and "tbl" bucket table pointers point to the same bucket array, we should try to wake up the resizing worker thread, otherwise, it indicates the work of resizing hash table is not finished yet. However, currently we will wake up the worker thread only when the two pointers point to different bucket array. Obviously this is wrong. So, the issue is also fixed as well in the patch. Signed-off-by:
-
Ying Xue authored
Define an internal compare function and relevant compare argument, and then make use of rhashtable_lookup_compare() to lookup key in hash table, reducing duplicated code between rhashtable_lookup() and rhashtable_lookup_compare(). Signed-off-by:
-
David S. Miller authored
Hariprasad Shenai says: ==================== Add support for few debugfs entries This patch series adds support for devlog, cim_la, cim_qcfg and mps_tcam debugfs entries. The patches series is created against 'net-next' tree. And includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: -
Hariprasad Shenai authored
Debug log to get the MPS TCAM table Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Adds debug log to get cim queue config Signed-off-by:
-
Hariprasad Shenai authored
The CIM LA captures the embedded processor’s internal state. Optionally, it can also trace the flow of data in and out of the embedded processor. Therefore, the CIM LA output contains detailed information of what code the embedded processor executed prior to the CIM LA capture. Signed-off-by:
-
Hariprasad Shenai authored
Add support for device log entry in debugfs Signed-off-by:
-
WANG Cong authored
Vinson reported: HOSTCC Documentation/networking/timestamping/txtimestamp Documentation/networking/timestamping/txtimestamp.c:64:8: error: redefinition of ‘struct in6_pktinfo’ struct in6_pktinfo { ^ In file included from /usr/include/arpa/inet.h:23:0, from Documentation/networking/timestamping/txtimestamp.c:33: /usr/include/netinet/in.h:456:8: note: originally defined here struct in6_pktinfo ^ After we sync with libc header, we don't need this ugly hack any more. Reported-by:Vinson Lee <vlee@twopensource.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
WANG Cong authored
Both netinet/in.h and linux/ipv6.h define these two structs, if we include both of them, we got: /usr/include/linux/ipv6.h:19:8: error: redefinition of ‘struct in6_pktinfo’ struct in6_pktinfo { ^ In file included from /usr/include/arpa/inet.h:22:0, from txtimestamp.c:33: /usr/include/netinet/in.h:524:8: note: originally defined here struct in6_pktinfo ^ In file included from txtimestamp.c:40:0: /usr/include/linux/ipv6.h:24:8: error: redefinition of ‘struct ip6_mtuinfo’ struct ip6_mtuinfo { ^ In file included from /usr/include/arpa/inet.h:22:0, from txtimestamp.c:33: /usr/include/netinet/in.h:531:8: note: originally defined here struct ip6_mtuinfo ^ So similarly to what we did for in6_addr, we need to sync with libc header on their definitions. Signed-off-by:
-
- 07 Jan, 2015 18 commits
-
-
Markus Pargmann authored
BATMAN_ADV_DEBUG is using debugfs files for the debugging log. So it depends on DEBUG_FS which is missing as dependency in the Kconfig file. Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
Antonio Quartulli <antonio@meshcoding.com>
-
Simon Wunderlich authored
Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Antonio Quartulli authored
Reported-by: checkpatch Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch>
-
Martin Hundebøll authored
Since other network components (and some drivers) uses the control block provided in skb's, the network coding feature might wrongly assume that an SKB has been decoded, and thus not try to code it with another packet again. This happens for instance when batman-adv is running on a bridge device. Fix this by clearing the control block for every received SKB. Introduced by 3c12de9a ("batman-adv: network coding - code and transmit packets if possible") Signed-off-by:
Martin Hundebøll <martin@hundeboll.net> Signed-off-by:
-
Antonio Quartulli authored
Signed-off-by:
-
Antonio Quartulli authored
Signed-off-by:
-
Antonio Quartulli authored
Signed-off-by:
-
Antonio Quartulli authored
Signed-off-by:
-
Antonio Quartulli authored
Signed-off-by:
-
Martin Hundebøll authored
Signed-off-by:
-
Martin Hundebøll authored
Signed-off-by:
-
Martin Hundebøll authored
Signed-off-by:
-
Martin Hundebøll authored
Signed-off-by:
-
Simon Wunderlich authored
This variable became obsolete when changing to the new bonding mechanism based on the multi interface optimization. Since its not used anywhere, remove it. Reported-by:
Linus Lüssing <linus.luessing@web.de> Signed-off-by:
-
Antonio Quartulli authored
Cc: Linus Lüssing <linus.luessing@web.de> Signed-off-by:
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Just a pile of random fixes, including: 1) Do not apply TSO limits to non-TSO packets, fix from Herbert Xu. 2) MDI{,X} eeprom check in e100 driver is reversed, from John W. Linville. 3) Missing error return assignments in several ethernet drivers, from Julia Lawall. 4) Altera TSE device doesn't come back up after ifconfig down/up sequence, fix from Kostya Belezko. 5) Add more cases to the check for whether the qmi_wwan device has a bogus MAC address and needs to be assigned a random one. From Kristian Evensen. 6) Fix interrupt hangs in CPSW, from Felipe Balbi. 7) Implement ndo_features_check in r8152 so that the stack doesn't feed GSO packets which are outside of the chip's capabilities. From Hayes Wang" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) qla3xxx: don't allow never end busy loop xen-netback: fixing the propagation of the transmit shaper timeout r8152: support ndo_features_check batman-adv: fix potential TT client + orig-node memory leak batman-adv: fix multicast counter when purging originators batman-adv: fix counter for multicast supporting nodes batman-adv: fix lock class for decoding hash in network-coding.c batman-adv: fix delayed foreign originator recognition batman-adv: fix and simplify condition when bonding should be used Revert "mac80211: Fix accounting of the tailroom-needed counter" net: ethernet: cpsw: fix hangs with interrupts enic: free all rq buffs when allocation fails qmi_wwan: Set random MAC on devices with buggy fw openvswitch: Consistently include VLAN header in flow and port stats. tcp: Do not apply TSO segment limit to non-TSO packets Altera TSE: Add missing phydev net/mlx4_core: Fix error flow in mlx4_init_hca() net/mlx4_core: Correcly update the mtt's offset in the MR re-reg flow qlcnic: Fix return value in qlcnic_probe() net: axienet: fix error return code ... -
git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds authored
Pull IPMI fixlet from Corey Minyard: "Fix a compile warning" * tag 'for-linus-3' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: Fix compile warning with tv_usec
-
- 06 Jan, 2015 1 commit
-
-
Feng Kan authored
This adds support for APM X-Gene ethernet driver to use ACPI table to derive ethernet driver parameter. Signed-off-by:
Feng Kan <fkan@apm.com> Signed-off-by:
-
