- 16 Jan, 2012 15 commits
-
-
Hans de Goede authored
Since we always do a set_video_mode on stream start, there is no need to actually send the mode info to the device on a s_fmt / s_parm ioctl. Not doing this saves us doing (slow) usb io. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
Before this patch various code in the mode setting patch checked pdev->pixfmt, but that was not set until the mode setting succeeded, so it was looking at the old pixfmt! This patch fixes this by making the pixfmt a parameter to set_video_mode, and setting it from set_video_mode on success. Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Hans Verkuil authored
Instead of messing around with id's it's much easier to just compare against a filehandle pointer. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Andy Walls <awalls@md.metrocast.net> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
For some reason the cx18 driver could open the radio device only once. Remove this limitation. Signed-off-by:
-
Hans Verkuil authored
For some reason the /dev/radio device was implemented as an exclusive open: you could open it only once and not a second time. Remove this limitation. Signed-off-by:
-
Hans Verkuil authored
As per the feature removal document, make the tuner type check more strict so that it is no longer possible to set the radio frequency through a video node or the TV frequency through a radio node. Signed-off-by:
-
Hans Verkuil authored
As Rupert pointed out, the phrase "It is good practice" should be replaced with "You must". Signed-off-by:
-
Hans Verkuil authored
Update the spec to the behavior implemented by the control framework. This should have been documented long ago but for some reason it was never done. Signed-off-by:
-
Hans Verkuil authored
The omap_vout driver has an output overlay, but never advertised that capability. The driver should also set the V4L2_FBUF_FLAG_OVERLAY flag. Signed-off-by:
-
Hans Verkuil authored
The zoran driver does not support this flag, so don't set it. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Dan Carpenter authored
The error handling in the original code wasn't complete so static checkers complained about a potential NULL deference. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 15 Jan, 2012 3 commits
-
-
Mauro Carvalho Chehab authored
The changeset 240ab508 is incomplete, as the first thing that happens at cache clear is to do a memset with 0 to the cache. So, the delivery system needs to be explicitly preserved there. Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Lawrence[1], MythTV 0.24.1 does the wrong thing with a DVBv5 call: it fills the delivery system with SYS_UNDEFINED, expecting that the DVB core would work with that. This used to work by accident, as the DVB core were missing the check for the supported delivery systems. Yet, fixing it is easy, so let's add a logic to handle this case, to provide backward compatibility. [1] http://patchwork.linuxtv.org/patch/8314/Signed-off-by:
-
Antti Palosaari authored
I added it by mistake. It is useless as no real hardware. It even uses even Cypress FX2, general USB bridge chip, default IDs that makes driver load all FX2 devices having default ID... Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
- 11 Jan, 2012 22 commits
-
-
Mauro Carvalho Chehab authored
Some time ago, Manoel sent us a patch adding more stuff to the init sequence. However, his patch were also doing non-related stuff, by changing the init logic without any good reason. So, it was asked for him to submit a patch with just the data that has changed, in order to allow us to better analyze it. As he didn't what it was requested, I finally found some time to dig into his init sequence and add it here. Basically, new stuff is added there. There are a few changes: 1) The removal of the extra (duplicated) logic that puts the chip into the serial mode; 2) Some Viterbi VBER measurement init data was changed from 0x00 to 0xff for layer A, to match what was done for layers B and C. None of those caused any regressions and both make sense on my eyes. The other parameters additions actually increased the tuning quality for some channels. Yet, some channels that were previously discovered with scan disappered, while others appeared instead. This were tested in Brasilia, with an external antena. At the overall, it is now a little better. So, better to add these, and then try to figure out a configuration that would get even better scanning results. Reported-by:
Manoel Pinheiro <pinusdtv@hotmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
On mb86a20s, some registers have sub-addresses, while others not. In order to make easier to compare different settings, group them. No functional changes in this patch. Signed-off-by: -
Mauro Carvalho Chehab authored
As a DVBv3 application may be relying on the delivery system, don't reset it at DTV_CLEAR. For DVBv5 applications, the delivery system should be set anyway. Signed-off-by: -
Malcolm Priestley authored
Fix error where SNR unstable and jumps levels. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Steven Toth authored
We can pass a NO_SIGNAL video decoder state back to applications if it's available. Signed-off-by:
Steven Toth <stoth@kernellabs.com> Signed-off-by:
-
Steven Toth authored
Allow bridge drivers to query status. Signed-off-by:
-
Samuel Rakitnican authored
This remote was added with support for card Compro VideoMate M1F. This remote is shipped with various Compro cards, not this one only. Furthermore this remote can be bought separately under name Compro VideoMate K100. http://compro.com.tw/en/product/k100/k100.html So give it a proper name. [mchehab@redhat.com: Fix the Makefile] Signed-off-by:Samuel Rakitničan <samuel.rakitnican@gmail.com> Signed-off-by:
-
Fabio Estevam authored
Fix the following build warning: warning: (VIDEO_AU0828) selects DVB_AU8522 which has unmet direct dependencies (MEDIA_SUPPORT && DVB_CAPTURE_DRIVERS && DVB_CORE && I2C && VIDEO_V4L2) Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Axel Lin authored
This patch converts the drivers in drivers/media/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: "Richard Röjfors" <richard.rojfors@pelagicore.com> Cc: "Matti J. Aaltonen" <matti.j.aaltonen@nokia.com> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Manjunath Hadli <manjunath.hadli@ti.com> Cc: Muralidharan Karicheri <m-karicheri2@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Daniel Drake <dsd@laptop.org> Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by:
-
Fabio Estevam authored
Fix the following build warning: warning: (VIDEO_CX231XX_DVB) selects DVB_MB86A20S which has unmet direct dependencies (MEDIA_SUPPORT && DVB_CAPTURE_DRIVERS && DVB_CORE && I2C) Signed-off-by:
-
Andrzej Pietrasiewicz authored
Add driver for the JPEG codec IP block available in Samsung Exynos SoC series. The driver is implemented as a V4L2 mem-to-mem device. It exposes two video nodes to user space, one for the encoding part, and one for the decoding part. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by:
Sakari Ailus <sakari.ailus@iki.fi> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by:
Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by:
-
Tomasz Stanislawski authored
Pixels were preferred units for selection rectangles over driver-dependent units for almost all use cases. Therefore the units were fixed to pixels. Signed-off-by:
-
Tomasz Stanislawski authored
Adjusting of Video Processor's scaling factors was flawed. It bounded scaling to range 1/16 to 1/1. The correct range should be 1/4 to 4/1. This patch fixes this bug. Signed-off-by:
-
Tomasz Stanislawski authored
This patch add support for V4L2 selection API to s5p-tv driver. Moreover it removes old API for cropping. Old applications would still work because the crop ioctls are emulated using the selection API. Signed-off-by:
-
Tomasz Stanislawski authored
This patch allows new video drivers to work correctly with applications that use the old-style crop API. The old crop ioctl is emulated by using selection callbacks. Signed-off-by:
-
Tomasz Stanislawski authored
This patch adds a documentation for VIDIOC_{G/S}_SELECTION ioctl. Moreover, the patch adds the description of modeling of composing, cropping and scaling features in V4L2. Finally, some examples are presented. Signed-off-by: -
Tomasz Stanislawski authored
This patch adds images in binary format for the V4L2 selection API. Signed-off-by:
-
Tomasz Stanislawski authored
This patch introduces new api for a precise control of cropping and composing features for video devices. The new ioctls are VIDIOC_S_SELECTION and VIDIOC_G_SELECTION. Signed-off-by:
-
Antti Palosaari authored
Fix some issues pointed out by Mauro. Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
Antti Palosaari authored
Allow use of that general callback for demod too. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
