- 19 Nov, 2019 30 commits
-
-
Evan Quan authored
Otherwise, the error message prompted will confuse user. Signed-off-by:
Evan Quan <evan.quan@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Evan Quan authored
RunBTC is added for Navi ASIC on hardware setup. Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
-
Evan Quan authored
Otherwise, without RLC reinitialization, the DPM reenablement will fail. That affects the custom pptable uploading. V2: setting/clearing uploading_custom_pp_table in smu_sys_set_pp_table() Reported-by:Matt Coffin <mcoffin13@gmail.com> Signed-off-by:
-
Leo Liu authored
It also doen't care about FW loading type, so enabling it directly. Signed-off-by:
Leo Liu <leo.liu@amd.com> Reviewed-by:
-
Leo Liu authored
Arcturus VCN and JPEG only got CG support, and no PG support Signed-off-by:
-
Leo Liu authored
And clean up the duplicated stuff Signed-off-by:
-
Leo Liu authored
By adding JPEG IP block to the family Signed-off-by:
-
Leo Liu authored
By using JPEG IP block type Signed-off-by:
-
Leo Liu authored
By using its own enabling function Signed-off-by:
-
Leo Liu authored
By using its own IP block type. Signed-off-by:
-
Leo Liu authored
By using its own JPEG PowerUp and PowerDown messages v2: add argument to PowerDownJpeg message Signed-off-by:
-
Leo Liu authored
Similar to SDMA, VCN etc. v2: add argument to both PowerUpJpeg and PowerDownJpeg messages Signed-off-by:
-
Leo Liu authored
By separating the JPEG power feature, and using its own PowerUp and PowerDown messages v2: remove PowerUpJpeg message argument Signed-off-by:
-
Leo Liu authored
It will be used for different SMU specific to HW Signed-off-by:
-
Leo Liu authored
And enable them for Navi1x and Renoir Signed-off-by:
-
Leo Liu authored
From JPEG2.0, it will use its own PG/CG Signed-off-by:
-
Leo Liu authored
They are no longer needed, using from JPEG2.0 instead. Signed-off-by:
-
Leo Liu authored
It got separated from VCN2.0 with a new jpeg_v2_0_ip_block Signed-off-by:
-
Leo Liu authored
They will be used for JPEG2.0 and later. Signed-off-by:
-
Leo Liu authored
From VCN2.0, JPEG2.0 is a separated IP block. Signed-off-by:
-
Leo Liu authored
JPEG1.0 will be functional along with VCN1.0 Signed-off-by:
-
Leo Liu authored
For VCN1.0, the separation is just in code wise, JPEG1.0 HW is still included in the VCN1.0 HW. Signed-off-by:
-
Leo Liu authored
It will be used for all versions of JPEG eventually. Previous JPEG tests will be removed later since they are still used by JPEG2.x. Signed-off-by:
-
Leo Liu authored
It will be used for JPEG IP 1.0, 2.0, 2.5 and later. Signed-off-by:
-
Xiaojie Yuan authored
1. no need to allocate an extra member for 'mqd_backup' array 2. backup/restore mqd to/from the correct 'mqd_backup' array slot v2: warning fix (Alex) Signed-off-by:
Xiaojie Yuan <xiaojie.yuan@amd.com> Acked-by:
-
Hawking Zhang authored
reuse vg20 umc functions for arcturus umc ras Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
John Clements <John.Clements@amd.com> Signed-off-by:
-
Hawking Zhang authored
check hw ras capablity via atomfirmware Signed-off-by:
-
Yong Zhao authored
After the recent cleanup, the functionalities provided by the previous kfd_kernel_queue_*.c are actually all packet manager related. So rename them to reflect that. Signed-off-by:
Yong Zhao <Yong.Zhao@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Yong Zhao authored
The ops_asic_specific function pointers are actually quite generic after using a simple if condition. Eliminate it by code refactoring. Signed-off-by:
-
Yong Zhao authored
The only difference that CIK kernel queue functions are different from VI is avoid allocating eop_mem. We can achieve that by using a if condition. Signed-off-by:
-
- 13 Nov, 2019 10 commits
-
-
yu kuai authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c: In function ‘vegam_populate_smc_acpi_level’: drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c:1117:11: warning: variable 'us_mvdd' set but not used [-Wunused-but-set-variable] It is never used, so can be removed. Fixes: ac7822b0 ("drm/amd/powerplay: add smumgr support for VEGAM (v2)") Signed-off-by:
yu kuai <yukuai3@huawei.com> Signed-off-by:
-
yu kuai authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c: In function ‘amdgpu_amdkfd_evict_userptr’: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c:1665:6: warning: variable ‘invalid’ set but not used [-Wunused-but-set-variable] 'invalid' is never used, so can be removed. Thus 'atomic_inc_return' can be replaced as 'atomic_inc' Fixes: 5ae0283e ("drm/amdgpu: Add userptr support for KFD") Signed-off-by:
-
yu kuai authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/amd/amdkfd/kfd_device.c: In function ‘kgd2kfd_post_reset’: drivers/gpu/drm/amd/amdkfd/kfd_device.c:745:11: warning: variable ‘count’ set but not used [-Wunused-but-set-variable] 'count' is never used, so can be removed. Thus 'atomic_dec_return' can be replaced as 'atomic_dec' Fixes: e42051d2 ("drm/amdkfd: Implement GPU reset handlers in KFD") Signed-off-by:
-
yu kuai authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/amd/amdgpu/amdgpu_display.c: In function ‘amdgpu_display_crtc_scaling_mode_fixup’: drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:693:27: warning: variable ‘amdgpu_connector’ set but not used [-Wunused-but-set-variable] Fixes: d38ceaf9 ("drm/amdgpu: add core driver (v4)") Signed-off-by:
-
yu kuai authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c: In function ‘gfx_v6_0_constants_init’: drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c:1579:6: warning: variable ‘mc_shared_chmap’ set but not used [-Wunused-but-set-variable] drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c: In function ‘gfx_v7_0_gpu_early_init’: drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:4262:6: warning: variable ‘mc_shared_chmap’ set but not used [-Wunused-but-set-variable] Fixes: 2cd46ad2 ("drm/amdgpu: add graphic pipeline implementation for si v8") Fixes: d93f3ca7 ("drm/amdgpu/gfx7: rework gpu_init()") Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c: In function get_pbn_from_timing: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:2364:11: warning: variable bpc set but not used [-Wunused-but-set-variable] It is not used since commit e49f6936 ("drm/amd/display: use proper formula to calculate bandwidth from timing"), this also remove get_color_depth(), which is only used here. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Yong Zhao authored
Adapt the change from: 1cd106ec ("drm/amdkfd: Stop using GFP_NOIO explicitly") Signed-off-by:
-
Yong Zhao authored
This is done for other GFX in commit bb2d2128. Port it to GFX10. Signed-off-by:
-
Yong Zhao authored
workgroup context data writes from m->cp_hqd_cntl_stack_size, so we should deduct it when calculating the used size. Signed-off-by:
-
Yong Zhao authored
Given control stack is now in the userspace context save restore area on GFX10, the same as GFX8, it is not needed to copy it back to userspace. Signed-off-by:
-
