It is not easy to use in4_pton() correctly without reading
its definition, so add some doc for it.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is not easy to use in6_pton() correctly without reading
its definition, so add some doc for it.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use be32_to_cpu instead of htonl to keep sparse happy.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit e2446eaa ("tcp_v4_send_reset: binding oif to iif in no
sock case").. tcp resets are always lost, when routing is asymmetric.
Yes, backing out that patch will result in misrouting of resets for
dead connections which used interface binding when were alive, but we
actually cannot do anything here.  What's died that's died and correct
handling normal unbound connections is obviously a priority.

Comment to comment:
> This has few benefits:
>   1. tcp_v6_send_reset already did that.

It was done to route resets for IPv6 link local addresses. It was a
mistake to do so for global addresses. The patch fixes this as well.

Actually, the problem appears to be even more serious than guaranteed
loss of resets.  As reported by Sergey Soloviev <sol@eqv.ru>, those
misrouted resets create a lot of arp traffic and huge amount of
unresolved arp entires putting down to knees NAT firewalls which use
asymmetric routing.
Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>

Some device types support a form of power management in which
the device suggests to the host that the device may be suspended
now. Support for that is best located in usbnet.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This USB V.92/V.32bis Controllered Modem have the USB vendor ID 0x0572
and device ID 0x1340. It need the NO_UNION_NORMAL quirk to be recognized.

Reference:
http://www.conexant.com/servlets/DownloadServlet/DSH-201723-005.pdf?docid=1725&revid=5
See idVendor and idProduct in table 6-1. Device Descriptors
Signed-off-by: Jean-Christian de Rivaz <jc@eclis.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Based on patch from Matthew Garrett <mjg@redhat.com> (https://lkml.org/lkml/2011/11/11/168).

http://driveragent.com/archive/30421/7-0-14 indicates that ASPM is
disabled on the 250 and 260. Duplicate for sanity.

Fixes random RX engine hangs I experienced with JMC250 on Clevo W270HU.
Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com>
Cc: Guo-Fu Tseng <cooldavid@cooldavid.org>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

UAPI Disintegration 2012-10-09
Signed-off-by: David S. Miller <davem@davemloft.net>

If the rc_dereference of tcp_fastopen_ctx ever fails then we copy 16 bytes
of kernel stack into the proc result.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We nowdays copy the buffer and free fw->data, so make the debug printk use
the right thing.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch originated from Hiroaki SHIMODA but has been modified
by Intel with some minor cleanups and additional commit log text.

Denys Fedoryshchenko and others reported Tx stalls on e1000e with
BQL enabled.  Issue was root caused to hardware delays. They were
introduced because some of the e1000e hardware with transmit
writeback bursting enabled, waits until the driver does an
explict flush OR there are WTHRESH descriptors to write back.

Sometimes the delays in question were on the order of seconds,
causing visible lag for ssh sessions and unacceptable tx
completion latency, especially for BQL enabled kernels.

To avoid possible Tx stalls, change WTHRESH back to 1.

The current plan is to investigate a method for re-enabling
WTHRESH while not harming BQL, but those patches will be later
for net-next if they work.

please enqueue for stable since v3.3 as this bug was introduced in
commit 3f0cfa3b
Author: Tom Herbert <therbert@google.com>
Date:   Mon Nov 28 16:33:16 2011 +0000

    e1000e: Support for byte queue limits

    Changes to e1000e to use byte queue limits.
Reported-by: Denys Fedoryshchenko <denys@visp.net.lb>
Tested-by: Denys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
CC: eric.dumazet@gmail.com
CC: therbert@google.com
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Marc Kleine-Budde says:

====================
this pull request for net, i.e. the v3.7 release cycle, contains the patch by
David Howells to move the UAPI related headers for the CAN subsystem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Sparse complains about RTA_MARK which is should be host order according
to include file and usage in iproute.

net/ipv4/route.c:2223:46: warning: incorrect type in argument 3 (different base types)
net/ipv4/route.c:2223:46:    expected restricted __be32 [usertype] value
net/ipv4/route.c:2223:46:    got unsigned int [unsigned] [usertype] flowic_mark
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An SKB paged fragment can consist of a compound page with order > 0.
However the netchannel protocol deals only in PAGE_SIZE frames.

Handle this in netbk_gop_frag_copy and xen_netbk_count_skb_slots by
iterating over the frames which make up the page.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Konrad Rzeszutek Wilk <konrad@kernel.org>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If lower layer driver leaves the ip header in the skb fragment, it needs to
be first pulled into skb->data before inspecting ip header length or ip version
number.
Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

"protos" is an array of unsigned longs and "i" is the number of bits in
an unsigned long so we need to use 1UL as well to prevent the shift
from wrapping around.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If vxlan is created and the ifindex is passed; there are two cases which
are incorrectly handled by the existing code. The ifindex could be zero
(i.e. no device) or there could be no device with that ifindex.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vxlan was trying to use postpull_rcsum to allow receive checksum
offload to work on drivers using CHECKSUM_COMPLETE method. But this
doesn't work correctly. Just force full receive checksum on received
packet.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tell upper layer protocols to allocate skb with additional headroom.
This avoids allocation and copy in local packet sends.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

VXLAN bases source UDP port based on flow to help the
receiver to be able to load balance based on outer header flow.

This patch restricts the port range to the normal UDP local
ports, and allows overriding via configuration.

It also uses jhash of Ethernet header when looking at flows
with out know L3 header.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When tunnelling a skb, associate it with the tunnel socket.
This allows parameters set on tunnel socket (like multicast loop
flag), to be picked up by ip_output.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Select source address for VXLAN packet based on route destination
and don't lie to route code. VXLAN is not GRE.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shift was wrong direction causing packets to hash based on
other parts of the ethernet header, not the address.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move code to find destination to a small function.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The !CONFIG_OF stubs aren't static so if multiple files include the
header with this configuration then the linker will see multiple
definitions of the stubs.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is weird to display IPv4 address in %x format, what's more,
IPv6 address is disaplayed in human-readable format too. So,
make it human-readable.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ETH_ZLEN is too small for IPv6, so this default value is not
suitable.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For IPv6, sizeof(struct ipv6hdr) = 40, thus the following
expression will result negative:

        datalen = pkt_dev->cur_pkt_size - 14 -
                  sizeof(struct ipv6hdr) - sizeof(struct udphdr) -
                  pkt_dev->pkt_overhead;

And,  the check "if (datalen < sizeof(struct pktgen_hdr))" will be
passed as "datalen" is promoted to unsigned, therefore will cause
a crash later.

This is a quick fix by checking if "datalen" is negative. The following
patch will increase the default value of 'min_pkt_size' for IPv6.

This bug should exist for a long time, so Cc -stable too.

Cc: <stable@vger.kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

John W. Linville says:

====================
Here is a batch of fixes intended for 3.7...

Amitkumar Karwar provides a couple of mwifiex fixes to correctly
report some reason codes for certain connection failures.  He also
provides a fix to cleanup after a scanning failure.  Bing Zhao rounds
that out with another mwifiex scanning fix.

Daniel Golle gives us a fix for a copy/paste error in rt2x00.

Felix Fietkau brings a couple of ath9k fixes related to suspend/resume,
and a couple of fixes to prevent memory leaks in ath9k and mac80211.

Ronald Wahl sends a carl9170 fix for a sleep in softirq context.

Thomas Pedersen reorders some code to prevent drv_get_tsf from being
called while holding a spinlock, now that it can sleep.

Finally, Wei Yongjun prevents a NULL pointer dereference in the
ath5k driver.

Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull pwm changes from Thierry Reding:
 "All legacy PWM providers have now been moved to the PWM subsystem.
  The plan for 3.8 is to adapt all board files to provide a lookup table
  for PWM devices in order to get rid of the global namespace.
  Subsequently, users of the legacy pwm_request() and pwm_free()
  functions can be migrated to the new pwm_get() and pwm_put()
  functions.  Once this has been completed, the legacy API and the
  compatibility code in the core can be removed.

  In addition to the above, these changes also add support for
  configuring the polarity of a PWM signal (currently only supported on
  ECAP and EHRPWM) and include a much needed rework of the i.MX driver.
  Managed functions to obtain and release a PWM device (devm_pwm_get()
  and devm_pwm_put()) have been added and the pwm-backlight driver has
  been updated to use them.  If the PWM subsystem hasn't been enabled,
  dummy functions are provided that allow the subsystem to safely
  compile out.

  Some common checks on input parameters have been moved to the core and
  removed from the drivers.  Finally, a small fix corrects the
  description of the PWM specifier's second cell in the device tree
  representation."

* tag 'for-3.7-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (23 commits)
  pwm: dt: Fix description of second PWM cell
  pwm: Check for negative duty-cycle and period
  pwm: Add Ingenic JZ4740 support
  MIPS: JZ4740: Export timer API
  pwm: Move PUV3 PWM driver to PWM framework
  unicore32: pwm: Use managed resource allocations
  unicore32: pwm: Remove unnecessary indirection
  unicore32: pwm: Use module_platform_driver()
  unicore32: pwm: Properly remap memory-mapped registers
  pwm-backlight: Use devm_pwm_get() instead of pwm_get()
  pwm: Move AB8500 PWM driver to PWM framework
  pwm: Fix compilation error when CONFIG_PWM is not defined
  pwm: i.MX: fix clock lookup
  pwm: i.MX: use per clock unconditionally
  pwm: i.MX: add devicetree support
  pwm: i.MX: Use module_platform_driver
  pwm: i.MX: add functions to enable/disable pwm.
  pwm: i.MX: remove unnecessary if in pwm_[en|dis]able
  pwm: i.MX: factor out SoC specific functions
  pwm: pwm-tiehrpwm: Add support for configuring polarity of PWM
  ...

Pull LED subsystem update from Bryan Wu.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (24 commits)
  leds: add output driver configuration for pca9633 led driver
  leds: lm3642: Use regmap_update_bits() in lm3642_chip_init()
  leds: Add new LED driver for lm3642 chips
  leds-lp5523: Fix riskiness of the page fault
  leds-lp5523: turn off the LED engines on unloading the driver
  leds-lm3530: Fix smatch warnings
  leds-lm3530: Use devm_regulator_get function
  leds: leds-gpio: adopt pinctrl support
  leds: Add new LED driver for lm355x chips
  leds-lp5523: use the i2c device id rather than fixed name
  leds-lp5523: add new device id for LP55231
  leds-lp5523: support new LP55231 device
  leds: triggers: send uevent when changing triggers
  leds-lp5523: minor code style fixes
  leds-lp5523: change the return type of lp5523_set_mode()
  leds-lp5523: set the brightness to 0 forcely on removing the driver
  leds-lp5523: add channel name in the platform data
  leds: leds-gpio: Use of_get_child_count() helper
  leds: leds-gpio: Use platform_{get,set}_drvdata
  leds: leds-gpio: use of_match_ptr()
  ...

Pull scsi target updates from Nicholas Bellinger:
 "Things have been calm for the most part with no new fabric drivers in
  flight for v3.7 (we're up to eight now !), so this update is primarily
  focused on addressing a few long-standing items within target-core and
  iscsi-target fabric code.

  The highlights include:

   - target: Simplify fabric sense data length handling (roland)
   - qla2xxx: Fix endianness of task management response code (roland)
   - target: fix truncation of mode data, support zero allocation length
     (paolo)
   - target: Properly support zero-length commands in normal processing
     path (paolo)
   - iscsi-target: Correctly set 0xffffffff field within ISCSI_OP_REJECT
     PDU (ronnie + nab)
   - iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG
     demo-mode (ronnie + nab)
   - target/file: Re-enable optional fd_buffered_io=1 operation (nab +
     hch)
   - iscsi-target: Add MaxXmitDataSegmenthLength forr target ->
     initiator MDRSL declaration (nab)
   - target: Add target_submit_cmd_map_sgls for SGL fabric memory
     passthrough (nab + hch)
   - tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls (hch +
     nab)
   - tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls (nab
     + hch)

  The last series for adding a new target_submit_cmd_map_sgls() fabric
  caller (as requested by hch) that accepts pre-allocated SGL memory
  (using existing logic), along with converting tcm_loop + tcm_vhost has
  only been in -next for the last days, but has gotten enough review
  +testing and is clear enough a mechanical change that I think it's
  reasonable to merge for -rc1 code.

  Thanks again to everyone who contributed this round! Extra special
  thanks to Roland (PureStorage) for tracking down the qla2xxx target
  TMR response code endian issue, and to Paolo (Redhat) for resolving
  the long standing zero-length CDB issues within target-core between
  virtual and pSCSI backends."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (44 commits)
  iscsi-target: Bump defaults for nopin_timeout + nopin_response_timeout values
  iscsit: proper endianess conversions
  iscsit: use the itt_t abstract type
  iscsit: add missing endianess conversion in iscsit_check_inaddr_any
  iscsit: remove incorrect unlock in iscsit_build_sendtargets_resp
  iscsit: mark various functions static
  target/iscsi: precedence bug in iscsit_set_dataout_sequence_values()
  target/usb-gadget: strlen() doesn't count the terminator
  target/usb-gadget: remove duplicate initialization
  tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls
  target: Add control CDB READ payload zero work-around
  tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls
  target: Add target_submit_cmd_map_sgls for SGL fabric memory passthrough
  iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode
  iscsi-target: Change iscsi_target_seq_pdu_list.c to honor MaxXmitDataSegmentLength
  iscsi-target: Add MaxXmitDataSegmentLength connection recovery check
  iscsi-target: Convert incoming PDU payload checks to MaxXmitDataSegmentLength
  iscsi-target: Enable MaxXmitDataSegmentLength operation in login path
  iscsi-target: Add base MaxXmitDataSegmentLength code
  target/file: Re-enable optional fd_buffered_io=1 operation
  ...

Pull second s390 update from Martin Schwidefsky:
 "The big thing in this pull request is the UAPI patch from David, and
  worth mentioning is the page table dumper.  The rest are small
  improvements and bug fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/entry: fix svc number for TIF_SYSCALL system call restart
  s390/mm,vmem: fix vmem_add_mem()/vmem_remove_range()
  s390/vmalloc: have separate modules area
  s390/zcrypt: remove duplicated include from zcrypt_pcixcc.c
  s390/css_chars: remove superfluous ifdef
  s390/chsc: make headers usable
  s390/mm: let kernel text section always begin at 1MB
  s390/mm: fix mapping of read-only kernel text section
  s390/mm: add page table dumper
  s390: add support to start the kernel in 64 bit mode.
  s390/mm,pageattr: remove superfluous EXPORT_SYMBOLs
  s390/mm,pageattr: add more page table walk sanity checks
  s390/mm: fix pmd_huge() usage for kernel mapping
  s390/dcssblk: cleanup device attribute usage
  s390/mm: use pfmf instruction to initialize storage keys
  s390/facilities: cleanup PFMF and HPAGE machine facility detection
  UAPI: (Scripted) Disintegrate arch/s390/include/asm

Pull nouveau drm fixes from Dave Airlie:
 "Just a bunch of nouveau fixes, Ben wants to get some alternate
  versions into stable."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau/timer: bump ptimer's alarm delay from u32 to u64
  drm/nouveau/fan: fix a typo in PWM's input clock calculation
  drm/nv50/clk: wire up pll_calc hook
  drm/nouveau: remove unused _nouveau_parent_ctor
  drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiB

Pull generic execve() changes from Al Viro:
 "This introduces the generic kernel_thread() and kernel_execve()
  functions, and switches x86, arm, alpha, um and s390 over to them."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (26 commits)
  s390: convert to generic kernel_execve()
  s390: switch to generic kernel_thread()
  s390: fold kernel_thread_helper() into ret_from_fork()
  s390: fold execve_tail() into start_thread(), convert to generic sys_execve()
  um: switch to generic kernel_thread()
  x86, um/x86: switch to generic sys_execve and kernel_execve
  x86: split ret_from_fork
  alpha: introduce ret_from_kernel_execve(), switch to generic kernel_execve()
  alpha: switch to generic kernel_thread()
  alpha: switch to generic sys_execve()
  arm: get rid of execve wrapper, switch to generic execve() implementation
  arm: optimized current_pt_regs()
  arm: introduce ret_from_kernel_execve(), switch to generic kernel_execve()
  arm: split ret_from_fork, simplify kernel_thread() [based on patch by rmk]
  generic sys_execve()
  generic kernel_execve()
  new helper: current_pt_regs()
  preparation for generic kernel_thread()
  um: kill thread->forking
  um: let signal_delivered() do SIGTRAP on singlestepping into handler
  ...

Pull UML changes from Richard Weinberger:
 "UML receives this time only cleanups.

  The most outstanding change is the 'include "foo.h"' do 'include
  <foo.h>' conversion done by Al Viro.

  It touches many files, that's why the diffstat is rather big."

* 'for-linus-37rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  typo in UserModeLinux-HOWTO
  hppfs: fix the return value of get_inode()
  hostfs: drop vmtruncate
  um: get rid of pointless include "..." where include <...> will do
  um: move sysrq.h out of include/shared
  um/x86: merge 32 and 64 bit variants of ptrace.h
  um/x86: merge 32 and 64bit variants of checksum.h

Pull networking updates from David Miller:

 1) UAPI changes for networking from David Howells

 2) A netlink dump is an operation we can sleep within, and therefore we
    need to make sure the dump provider module doesn't disappear on us
    meanwhile.  Fix from Gao Feng.

 3) Now that tunnels support GRO, we have to be more careful in
    skb_gro_reset_offset() otherwise we OOPS, from Eric Dumazet.

 4) We can end up processing packets for VLANs we aren't actually
    configured to be on, fix from Florian Zumbiehl.

 5) Fix routing cache removal regression in redirects and IPVS.  The
    core issue on the IPVS side is that it wants to rewrite who the
    nexthop is and we have to explicitly accomodate that case.  From
    Julian Anastasov.

 6) Error code return fixes all over the networking drivers from Peter
    Senna Tschudin.

 7) Fix routing cache removal regressions in IPSEC, from Steffen
    Klassert.

 8) Fix deadlock in RDS during pings, from Jeff Liu.

 9) Neighbour packet queue can trigger skb_under_panic() because we do
    not reset the network header of the SKB in the right spot.  From
    Ramesh Nagappa.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
  RDS: fix rds-ping spinlock recursion
  netdev/phy: Prototype of_mdio_find_bus()
  farsync: fix support for over 30 cards
  be2net: Remove code that stops further access to BE NIC based on UE bits
  pch_gbe: Fix build error by selecting all the possible dependencies.
  e1000e: add device IDs for i218
  ixgbe/ixgbevf: Limit maximum jumbo frame size to 9.5K to avoid Tx hangs
  ixgbevf: Set the netdev number of Tx queues
  UAPI: (Scripted) Disintegrate include/linux/tc_ematch
  UAPI: (Scripted) Disintegrate include/linux/tc_act
  UAPI: (Scripted) Disintegrate include/linux/netfilter_ipv6
  UAPI: (Scripted) Disintegrate include/linux/netfilter_ipv4
  UAPI: (Scripted) Disintegrate include/linux/netfilter_bridge
  UAPI: (Scripted) Disintegrate include/linux/netfilter_arp
  UAPI: (Scripted) Disintegrate include/linux/netfilter/ipset
  UAPI: (Scripted) Disintegrate include/linux/netfilter
  UAPI: (Scripted) Disintegrate include/linux/isdn
  UAPI: (Scripted) Disintegrate include/linux/caif
  net: fix typo in freescale/ucc_geth.c
  vxlan: fix more sparse warnings
  ...