1. 03 Dec, 2015 5 commits
  2. 02 Dec, 2015 9 commits
  3. 01 Dec, 2015 1 commit
    • Greg Kroah-Hartman's avatar
      Merge tag 'iio-for-4.5a' of... · f3cf3fb7
      Greg Kroah-Hartman authored
      Merge tag 'iio-for-4.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
      
      Jonathan writes:
      
      First set of new device support, features and cleanups for IIO in the 4.5 cycle
      
      Usual mixed bag, but the big item perhaps in this series is the DMA buffer
      support added by Lars-Peter Clausen. It's been in the works for a long time
      and it will be interesting to see what hardware support shows up now that
      this is available.
      
      New core features + associate cleanup.
      * Add generic DMA buffer infrastructure
      * Add a DMAengine framework based buffer
       Also associated minor changes.
         - Set the device buffer watermark based on the minimum watermark for all
           attached buffers rather than just the 'primary' one.
         - iio_buffer_init - only set the watermark default if one hasn't already
           been provided.  This allows simple support for devices with a fixed
           watermark.
         - read only attribute for watermark on fixed watermark devices.
         - add explicit buffer enable/disable callbacks to allow the buffer to
           do more than trivial actions when it is being turned on and off.
      * IIO_VAL_INT support in write_raw_get_fmt function.
      
      New device support
      * Freescale MMA7455/7456L accelerometers
      * Memsic MXC6255XC accelerometer
      * ST lis2dh12 accelerometer
      * TI ADS8688 ADC
      * TI Palamas (twl6035/7) gpadc
      
      New driver features
      * mma8452
        - support either of the available interrupt pins to cope with the case
          where board layout has lead to a particular one being connected.
      
      Staging graduation
      * Dummy driver
        - this driver acts as both an example and a test device for those with
          out hardware to develop userspace code against.
      
      Cleanups and minor bits and bobs.
      * treewide
        - Sort out the ordering of iio_device_register/unregister vs runtime
          pm function calls so that it's all nice and consistent and not race
          prone.
        - Check sscanf return values.  None of the cases will actually happen as
          the strings are supplied internally, but best to be consistent on this.
      * ad7780
        - switch over to the gpio descriptor interface and remove the now unused
          platform data which gets rid of a header entirely.
      * ad7793
        - drop a pointless else statement.
      * at91_adc
        - Swap kmalloc_array in for a kmalloc doing the same job.
      * dummy
        - get rid of some commented out lines that snuck in during the move of
          the driver.
      * lm3533-als
        - Print an error message on provision of an invalid resistance.
      * mcp320x
        - Add compatible strings with vendor prefix and deprecate those with
          no vendor prefix.
      * mxs-lradc
        - Use BIT macro in various places rather than shifted ones.
      * pa12203001
        - Power off the chip if the registration fails.
      * pulsedlight-lidar-lite
        - add runtime PM support.
      * xilinx XADC
        - constify an iio_buffer_setup_ops structure.
      f3cf3fb7
  4. 25 Nov, 2015 3 commits
  5. 24 Nov, 2015 6 commits
  6. 23 Nov, 2015 2 commits
  7. 22 Nov, 2015 14 commits
    • Linus Torvalds's avatar
      Merge branch 'akpm' (patches from Andrew) · 104e2a6f
      Linus Torvalds authored
      Merge slub bulk allocator updates from Andrew Morton:
       "This missed the merge window because I was waiting for some repairs to
        come in.  Nothing actually uses the bulk allocator yet and the changes
        to other code paths are pretty small.  And the net guys are waiting
        for this so they can start merging the client code"
      
      More comments from Jesper Dangaard Brouer:
       "The kmem_cache_alloc_bulk() call, in mm/slub.c, were included in
        previous kernel.  The present version contains a bug.  Vladimir
        Davydov noticed it contained a bug, when kernel is compiled with
        CONFIG_MEMCG_KMEM (see commit 03ec0ed5: "slub: fix kmem cgroup
        bug in kmem_cache_alloc_bulk").  Plus the mem cgroup counterpart in
        kmem_cache_free_bulk() were missing (see commit 03374518 "slub:
        add missing kmem cgroup support to kmem_cache_free_bulk").
      
        I don't consider the fix stable-material because there are no in-tree
        users of the API.
      
        But with known bugs (for memcg) I cannot start using the API in the
        net-tree"
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>:
        slab/slub: adjust kmem_cache_alloc_bulk API
        slub: add missing kmem cgroup support to kmem_cache_free_bulk
        slub: fix kmem cgroup bug in kmem_cache_alloc_bulk
        slub: optimize bulk slowpath free by detached freelist
        slub: support for bulk free with SLUB freelists
      104e2a6f
    • Linus Torvalds's avatar
      Merge tag 'tty-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty · dcfeda9d
      Linus Torvalds authored
      Pull tty/serial fixes from Greg KH:
       "Here are a few small tty/serial driver fixes for 4.4-rc2 that resolve
        some reported problems.
      
        All have been in linux-next, full details are in the shortlog below"
      
      * tag 'tty-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
        serial: export fsl8250_handle_irq
        serial: 8250_mid: Add missing dependency
        tty: audit: Fix audit source
        serial: etraxfs-uart: Fix crash
        serial: fsl_lpuart: Fix earlycon support
        bcm63xx_uart: Use the device name when registering an interrupt
        tty: Fix direct use of tty buffer work
        tty: Fix tty_send_xchar() lock order inversion
      dcfeda9d
    • Linus Torvalds's avatar
      Merge tag 'staging-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging · 7f217393
      Linus Torvalds authored
      Pull staging/IIO fixes from Greg KH:
       "Here are some staging and iio driver fixes for 4.4-rc2.  All of these
        are in response to issues that have been reported and have been in
        linux-next for a while"
      
      * tag 'staging-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
        Revert "Staging: wilc1000: coreconfigurator: Drop unneeded wrapper functions"
        iio: adc: xilinx: Fix VREFN scale
        iio: si7020: Swap data byte order
        iio: adc: vf610_adc: Fix division by zero error
        iio:ad7793: Fix ad7785 product ID
        iio: ad5064: Fix ad5629/ad5669 shift
        iio:ad5064: Make sure ad5064_i2c_write() returns 0 on success
        iio: lpc32xx_adc: fix warnings caused by enabling unprepared clock
        staging: iio: select IRQ_WORK for IIO_DUMMY_EVGEN
        vf610_adc: Fix internal temperature calculation
      7f217393
    • Linus Torvalds's avatar
      Merge tag 'usb-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb · 6d2d91b3
      Linus Torvalds authored
      Pull USB fixes from Greg KH:
       "Here are a number of USB fixes and new device ids for 4.4-rc2.  All
        have been in linux-next and the details are in the shortlog"
      
      * tag 'usb-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
        usblp: do not set TASK_INTERRUPTIBLE before lock
        USB: MAINTAINERS: cxacru
        usb: kconfig: fix warning of select USB_OTG
        USB: option: add XS Stick W100-2 from 4G Systems
        xhci: Fix a race in usb2 LPM resume, blocking U3 for usb2 devices
        usb: xhci: fix checking ep busy for CFC
        xhci: Workaround to get Intel xHCI reset working more reliably
        usb: chipidea: imx: fix a possible NULL dereference
        usb: chipidea: usbmisc_imx: fix a possible NULL dereference
        usb: chipidea: otg: gadget module load and unload support
        usb: chipidea: debug: disable usb irq while role switch
        ARM: dts: imx27.dtsi: change the clock information for usb
        usb: chipidea: imx: refine clock operations to adapt for all platforms
        usb: gadget: atmel_usba_udc: Expose correct device speed
        usb: musb: enable usb_dma parameter
        usb: phy: phy-mxs-usb: fix a possible NULL dereference
        usb: dwc3: gadget: let us set lower max_speed
        usb: musb: fix tx fifo flush handling
        usb: gadget: f_loopback: fix the warning during the enumeration
        usb: dwc2: host: Fix remote wakeup when not in DWC2_L2
        ...
      6d2d91b3
    • Linus Torvalds's avatar
      Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus · 0ec7dc8d
      Linus Torvalds authored
      Pull MIPS fixes from Ralf Baechle:
      
       - Fix a flood of annoying build warnings
      
       - A number of fixes for Atheros 79xx platforms
      
      * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
        MIPS: ath79: Add a machine entry for booting OF machines
        MIPS: ath79: Fix the size of the MISC INTC registers in ar9132.dtsi
        MIPS: ath79: Fix the DDR control initialization on ar71xx and ar934x
        MIPS: Fix flood of warnings about comparsion being always true.
      0ec7dc8d
    • Linus Torvalds's avatar
      Merge branch 'parisc-4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux · 94521b2f
      Linus Torvalds authored
      Pull parisc update from Helge Deller:
       "This patchset adds Huge Page and HUGETLBFS support for parisc"
      
      Honestly, the hugepage support should have gone through in the merge
      window, and is not really an rc-time fix.  But it only touches
      arch/parisc, and I cannot find it in myself to care.  If one of the
      three parisc users notices a breakage, I will point at Helge and make
      rude farting noises.
      
      * 'parisc-4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
        parisc: Map kernel text and data on huge pages
        parisc: Add Huge Page and HUGETLBFS support
        parisc: Use long branch to do_syscall_trace_exit
        parisc: Increase initial kernel mapping to 32MB on 64bit kernel
        parisc: Initialize the fault vector earlier in the boot process.
        parisc: Add defines for Huge page support
        parisc: Drop unused MADV_xxxK_PAGES flags from asm/mman.h
        parisc: Drop definition of start_thread_som for HP-UX SOM binaries
        parisc: Fix wrong comment regarding first pmd entry flags
      94521b2f
    • Linus Torvalds's avatar
      Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 727cde6c
      Linus Torvalds authored
      Pull perf tool fixes from Thomas Gleixner:
       "A couple of fixes for perf tools:
      
         - Build system updates
      
         - Plug a memory leak in an error path of perf probe
      
         - Tear down probes correctly when adding fails
      
         - Fixes to the perf symbol handling
      
         - Fix ordering of event processing in buildid-list
      
         - Fix per DSO filtering in the histogram browser"
      
      * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        perf probe: Clear probe_trace_event when add_probe_trace_event() fails
        perf probe: Fix memory leaking on failure by clearing all probe_trace_events
        perf inject: Also re-pipe lost_samples event
        perf buildid-list: Requires ordered events
        perf symbols: Fix dso lookup by long name and missing buildids
        perf symbols: Allow forcing reading of non-root owned files by root
        perf hists browser: The dso can be obtained from popup_action->ms.map->dso
        perf hists browser: Fix 'd' hotkey action to filter by DSO
        perf symbols: Rebuild rbtree when adjusting symbols for kcore
        tools: Add a "make all" rule
        tools: Actually install tmon in the install rule
      727cde6c
    • Linus Torvalds's avatar
      Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 069ec229
      Linus Torvalds authored
      Pull x86 fixes from Thomas Gleixner:
       "This update contains:
      
         - MPX updates for handling 32bit processes
      
         - A fix for a long standing bug in 32bit signal frame handling
           related to FPU/XSAVE state
      
         - Handle get_xsave_addr() correctly in KVM
      
         - Fix SMAP check under paravirtualization
      
         - Add a comment to the static function trace entry to avoid further
           confusion about the difference to dynamic tracing"
      
      * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86/cpu: Fix SMAP check in PVOPS environments
        x86/ftrace: Add comment on static function tracing
        x86/fpu: Fix get_xsave_addr() behavior under virtualization
        x86/fpu: Fix 32-bit signal frame handling
        x86/mpx: Fix 32-bit address space calculation
        x86/mpx: Do proper get_user() when running 32-bit binaries on 64-bit kernels
      069ec229
    • Jesper Dangaard Brouer's avatar
      slab/slub: adjust kmem_cache_alloc_bulk API · 865762a8
      Jesper Dangaard Brouer authored
      Adjust kmem_cache_alloc_bulk API before we have any real users.
      
      Adjust API to return type 'int' instead of previously type 'bool'.  This
      is done to allow future extension of the bulk alloc API.
      
      A future extension could be to allow SLUB to stop at a page boundary, when
      specified by a flag, and then return the number of objects.
      
      The advantage of this approach, would make it easier to make bulk alloc
      run without local IRQs disabled.  With an approach of cmpxchg "stealing"
      the entire c->freelist or page->freelist.  To avoid overshooting we would
      stop processing at a slab-page boundary.  Else we always end up returning
      some objects at the cost of another cmpxchg.
      
      To keep compatible with future users of this API linking against an older
      kernel when using the new flag, we need to return the number of allocated
      objects with this API change.
      Signed-off-by: default avatarJesper Dangaard Brouer <brouer@redhat.com>
      Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
      Acked-by: default avatarChristoph Lameter <cl@linux.com>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      865762a8
    • Jesper Dangaard Brouer's avatar
      slub: add missing kmem cgroup support to kmem_cache_free_bulk · 03374518
      Jesper Dangaard Brouer authored
      Initial implementation missed support for kmem cgroup support in
      kmem_cache_free_bulk() call, add this.
      
      If CONFIG_MEMCG_KMEM is not enabled, the compiler should be smart enough
      to not add any asm code.
      
      Incoming bulk free objects can belong to different kmem cgroups, and
      object free call can happen at a later point outside memcg context.  Thus,
      we need to keep the orig kmem_cache, to correctly verify if a memcg object
      match against its "root_cache" (s->memcg_params.root_cache).
      Signed-off-by: default avatarJesper Dangaard Brouer <brouer@redhat.com>
      Reviewed-by: default avatarVladimir Davydov <vdavydov@virtuozzo.com>
      Cc: Christoph Lameter <cl@linux.com>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      03374518
    • Jesper Dangaard Brouer's avatar
      slub: fix kmem cgroup bug in kmem_cache_alloc_bulk · 03ec0ed5
      Jesper Dangaard Brouer authored
      The call slab_pre_alloc_hook() interacts with kmemgc and is not allowed to
      be called several times inside the bulk alloc for loop, due to the call to
      memcg_kmem_get_cache().
      
      This would result in hitting the VM_BUG_ON in __memcg_kmem_get_cache.
      
      As suggested by Vladimir Davydov, change slab_post_alloc_hook() to be able
      to handle an array of objects.
      
      A subtle detail is, loop iterator "i" in slab_post_alloc_hook() must have
      same type (size_t) as size argument.  This helps the compiler to easier
      realize that it can remove the loop, when all debug statements inside loop
      evaluates to nothing.  Note, this is only an issue because the kernel is
      compiled with GCC option: -fno-strict-overflow
      
      In slab_alloc_node() the compiler inlines and optimizes the invocation of
      slab_post_alloc_hook(s, flags, 1, &object) by removing the loop and access
      object directly.
      Signed-off-by: default avatarJesper Dangaard Brouer <brouer@redhat.com>
      Reported-by: default avatarVladimir Davydov <vdavydov@virtuozzo.com>
      Suggested-by: default avatarVladimir Davydov <vdavydov@virtuozzo.com>
      Reviewed-by: default avatarVladimir Davydov <vdavydov@virtuozzo.com>
      Cc: Christoph Lameter <cl@linux.com>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      03ec0ed5
    • Jesper Dangaard Brouer's avatar
      slub: optimize bulk slowpath free by detached freelist · d0ecd894
      Jesper Dangaard Brouer authored
      This change focus on improving the speed of object freeing in the
      "slowpath" of kmem_cache_free_bulk.
      
      The calls slab_free (fastpath) and __slab_free (slowpath) have been
      extended with support for bulk free, which amortize the overhead of
      the (locked) cmpxchg_double.
      
      To use the new bulking feature, we build what I call a detached
      freelist.  The detached freelist takes advantage of three properties:
      
       1) the free function call owns the object that is about to be freed,
          thus writing into this memory is synchronization-free.
      
       2) many freelist's can co-exist side-by-side in the same slab-page
          each with a separate head pointer.
      
       3) it is the visibility of the head pointer that needs synchronization.
      
      Given these properties, the brilliant part is that the detached
      freelist can be constructed without any need for synchronization.  The
      freelist is constructed directly in the page objects, without any
      synchronization needed.  The detached freelist is allocated on the
      stack of the function call kmem_cache_free_bulk.  Thus, the freelist
      head pointer is not visible to other CPUs.
      
      All objects in a SLUB freelist must belong to the same slab-page.
      Thus, constructing the detached freelist is about matching objects
      that belong to the same slab-page.  The bulk free array is scanned is
      a progressive manor with a limited look-ahead facility.
      
      Kmem debug support is handled in call of slab_free().
      
      Notice kmem_cache_free_bulk no longer need to disable IRQs. This
      only slowed down single free bulk with approx 3 cycles.
      
      Performance data:
       Benchmarked[1] obj size 256 bytes on CPU i7-4790K @ 4.00GHz
      
      SLUB fastpath single object quick reuse: 47 cycles(tsc) 11.931 ns
      
      To get stable and comparable numbers, the kernel have been booted with
      "slab_merge" (this also improve performance for larger bulk sizes).
      
      Performance data, compared against fallback bulking:
      
      bulk -  fallback bulk            - improvement with this patch
         1 -  62 cycles(tsc) 15.662 ns - 49 cycles(tsc) 12.407 ns- improved 21.0%
         2 -  55 cycles(tsc) 13.935 ns - 30 cycles(tsc) 7.506 ns - improved 45.5%
         3 -  53 cycles(tsc) 13.341 ns - 23 cycles(tsc) 5.865 ns - improved 56.6%
         4 -  52 cycles(tsc) 13.081 ns - 20 cycles(tsc) 5.048 ns - improved 61.5%
         8 -  50 cycles(tsc) 12.627 ns - 18 cycles(tsc) 4.659 ns - improved 64.0%
        16 -  49 cycles(tsc) 12.412 ns - 17 cycles(tsc) 4.495 ns - improved 65.3%
        30 -  49 cycles(tsc) 12.484 ns - 18 cycles(tsc) 4.533 ns - improved 63.3%
        32 -  50 cycles(tsc) 12.627 ns - 18 cycles(tsc) 4.707 ns - improved 64.0%
        34 -  96 cycles(tsc) 24.243 ns - 23 cycles(tsc) 5.976 ns - improved 76.0%
        48 -  83 cycles(tsc) 20.818 ns - 21 cycles(tsc) 5.329 ns - improved 74.7%
        64 -  74 cycles(tsc) 18.700 ns - 20 cycles(tsc) 5.127 ns - improved 73.0%
       128 -  90 cycles(tsc) 22.734 ns - 27 cycles(tsc) 6.833 ns - improved 70.0%
       158 -  99 cycles(tsc) 24.776 ns - 30 cycles(tsc) 7.583 ns - improved 69.7%
       250 - 104 cycles(tsc) 26.089 ns - 37 cycles(tsc) 9.280 ns - improved 64.4%
      
      Performance data, compared current in-kernel bulking:
      
      bulk - curr in-kernel  - improvement with this patch
         1 -  46 cycles(tsc) - 49 cycles(tsc) - improved (cycles:-3) -6.5%
         2 -  27 cycles(tsc) - 30 cycles(tsc) - improved (cycles:-3) -11.1%
         3 -  21 cycles(tsc) - 23 cycles(tsc) - improved (cycles:-2) -9.5%
         4 -  18 cycles(tsc) - 20 cycles(tsc) - improved (cycles:-2) -11.1%
         8 -  17 cycles(tsc) - 18 cycles(tsc) - improved (cycles:-1) -5.9%
        16 -  18 cycles(tsc) - 17 cycles(tsc) - improved (cycles: 1)  5.6%
        30 -  18 cycles(tsc) - 18 cycles(tsc) - improved (cycles: 0)  0.0%
        32 -  18 cycles(tsc) - 18 cycles(tsc) - improved (cycles: 0)  0.0%
        34 -  78 cycles(tsc) - 23 cycles(tsc) - improved (cycles:55) 70.5%
        48 -  60 cycles(tsc) - 21 cycles(tsc) - improved (cycles:39) 65.0%
        64 -  49 cycles(tsc) - 20 cycles(tsc) - improved (cycles:29) 59.2%
       128 -  69 cycles(tsc) - 27 cycles(tsc) - improved (cycles:42) 60.9%
       158 -  79 cycles(tsc) - 30 cycles(tsc) - improved (cycles:49) 62.0%
       250 -  86 cycles(tsc) - 37 cycles(tsc) - improved (cycles:49) 57.0%
      
      Performance with normal SLUB merging is significantly slower for
      larger bulking.  This is believed to (primarily) be an effect of not
      having to share the per-CPU data-structures, as tuning per-CPU size
      can achieve similar performance.
      
      bulk - slab_nomerge   -  normal SLUB merge
         1 -  49 cycles(tsc) - 49 cycles(tsc) - merge slower with cycles:0
         2 -  30 cycles(tsc) - 30 cycles(tsc) - merge slower with cycles:0
         3 -  23 cycles(tsc) - 23 cycles(tsc) - merge slower with cycles:0
         4 -  20 cycles(tsc) - 20 cycles(tsc) - merge slower with cycles:0
         8 -  18 cycles(tsc) - 18 cycles(tsc) - merge slower with cycles:0
        16 -  17 cycles(tsc) - 17 cycles(tsc) - merge slower with cycles:0
        30 -  18 cycles(tsc) - 23 cycles(tsc) - merge slower with cycles:5
        32 -  18 cycles(tsc) - 22 cycles(tsc) - merge slower with cycles:4
        34 -  23 cycles(tsc) - 22 cycles(tsc) - merge slower with cycles:-1
        48 -  21 cycles(tsc) - 22 cycles(tsc) - merge slower with cycles:1
        64 -  20 cycles(tsc) - 48 cycles(tsc) - merge slower with cycles:28
       128 -  27 cycles(tsc) - 57 cycles(tsc) - merge slower with cycles:30
       158 -  30 cycles(tsc) - 59 cycles(tsc) - merge slower with cycles:29
       250 -  37 cycles(tsc) - 56 cycles(tsc) - merge slower with cycles:19
      
      Joint work with Alexander Duyck.
      
      [1] https://github.com/netoptimizer/prototype-kernel/blob/master/kernel/mm/slab_bulk_test01.c
      
      [akpm@linux-foundation.org: BUG_ON -> WARN_ON;return]
      Signed-off-by: default avatarJesper Dangaard Brouer <brouer@redhat.com>
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
      Acked-by: default avatarChristoph Lameter <cl@linux.com>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d0ecd894
    • Jesper Dangaard Brouer's avatar
      slub: support for bulk free with SLUB freelists · 81084651
      Jesper Dangaard Brouer authored
      Make it possible to free a freelist with several objects by adjusting API
      of slab_free() and __slab_free() to have head, tail and an objects counter
      (cnt).
      
      Tail being NULL indicate single object free of head object.  This allow
      compiler inline constant propagation in slab_free() and
      slab_free_freelist_hook() to avoid adding any overhead in case of single
      object free.
      
      This allows a freelist with several objects (all within the same
      slab-page) to be free'ed using a single locked cmpxchg_double in
      __slab_free() and with an unlocked cmpxchg_double in slab_free().
      
      Object debugging on the free path is also extended to handle these
      freelists.  When CONFIG_SLUB_DEBUG is enabled it will also detect if
      objects don't belong to the same slab-page.
      
      These changes are needed for the next patch to bulk free the detached
      freelists it introduces and constructs.
      
      Micro benchmarking showed no performance reduction due to this change,
      when debugging is turned off (compiled with CONFIG_SLUB_DEBUG).
      Signed-off-by: default avatarJesper Dangaard Brouer <brouer@redhat.com>
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
      Acked-by: default avatarChristoph Lameter <cl@linux.com>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      81084651
    • Matt Ranostay's avatar
      iio: pulsedlight-lidar-lite: add runtime PM · 4ac4e086
      Matt Ranostay authored
      Add runtime PM support for the lidar-lite module to enable low power
      mode when last device requested reading is over a second.
      Signed-off-by: default avatarMatt Ranostay <mranostay@gmail.com>
      Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
      4ac4e086