- 10 Sep, 2018 40 commits
-
-
Colin Ian King authored
Don't populate the array 'broadcast' on the stack but instead make it static. Makes the object code smaller by 53 bytes: Before: text data bss dec hex filename 10511 1521 448 12480 30c0 drivers/staging/most/net/net.o After: text data bss dec hex filename 10394 1585 448 12427 308b drivers/staging/most/net/net.o (gcc version 8.2.0 x86_64) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
Instead of creating a dummy child device to manage the card object, just use devm stuff directly for releasing with snd_card_free(). This results in a lot of code reduction. Since the dummy child devices are gone, the device object to be passed to the memory allocator needs to be adjusted as well. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Tested-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Takashi Iwai authored
Just a minor code refactoring and adding some const prefix. Signed-off-by:
-
Takashi Iwai authored
All three functions to create PCM objects are fairly resemble, and can be unified to a single common helper. Signed-off-by:
-
Takashi Iwai authored
The recent ALSA PCM core supports the SNDRV_PCM_INFO_SYNC_APPLPTR flag indicating that the driver needs the ack call at each appl_ptr update. This is requirement for the indirect PCM implementations like bcm2835-audio driver, too. Signed-off-by:
-
Takashi Iwai authored
The memory access to the pages allocated with SNDRV_DMA_TYPE_CONTINUOUS are basically non-coherent, and it becomes a problem when a process accesses via mmap. For the more consistent access, use the device coherent memory, just by replacing the call pattern in the allocator helpers. The only point we need to be careful for is the device object passed there; since bcm2835-audio driver creates fake devices and each card is created on top of that, we need to pass its parent device as the real device object. Signed-off-by:
-
Takashi Iwai authored
For more consistency, move the module parameter description right after its variable definition. Signed-off-by:
-
Takashi Iwai authored
Yet a few header files are included unnecessarily. Drop them. Also remove trivial comments. Signed-off-by:
-
Takashi Iwai authored
For making the whole code more consistent, replace the home-made debug print macros with the standard dev_err() & co. Signed-off-by:
-
Takashi Iwai authored
Instead of allocating a separate snd_device object, let snd_card_new() allocate the private resource. This simplifies the code. Signed-off-by:
-
Takashi Iwai authored
This is the most significant part in the patch series. The bcm2835-audio driver used to queue the commands to vc04 core via workqueue, but basically the whole accesses to vc04 core are done in the sleepable context, including the callback calls. In such a case, rewriting the code using non-atomic PCM ops will simplify the logic a lot. This patch does it: all workqueue are gone and each former-work implementation is now directly called from PCM ops like trigger and write transfer. Along with it, the DMA position updater, bcm2835_playback_fifo(), was also rewritten to use a simpler logic. Now it handles the XRUN and draining properly by calling snd_pcm_stop() conditionally. The current position is kept in atomic_t value so that it can be read concurrently from the pointer callback. Also, the bcm2835_audio_instance object is allocated at the beginning of bcm2835_audio_open(). This makes the resource management clearer. Signed-off-by:
-
Takashi Iwai authored
This is a cleanup and code refactoring in bcm2835-vchiq.c. The major code changes are to provide local helpers for easier use of lock / unlock, and message passing with/without response wait. This allows us to reduce lots of open codes. Also, the max packet is set at opening the stream, not at each time when the write gets called. Signed-off-by:
-
Takashi Iwai authored
The bcm2835_audio_instance object contains the array of VCHI_SERVICE_HANDLE_T, while the code assumes and uses only the first element explicitly. Let's reduce to a single vchi handle for simplifying the code. Signed-off-by:
-
Takashi Iwai authored
It seems that the resolution of vc04 callback is in 10 msec; i.e. the minimal period size is also 10 msec. This patch adds the corresponding hw constraint. Signed-off-by:
-
Takashi Iwai authored
The chip->audio_mutex is used basically for protecting the opened stream assignment, and the prepare callback is irrelevant with it. Signed-off-by:
-
Takashi Iwai authored
These debug messages worsen the code readability a lot while they give little debuggability (which we already have via tracing, in anyway). Let's clean them up. This allows us to reduce the snd_bcm2835_pcm_lib_ioctl() function to be a direct call of the snd_pcm_lib_ioctl callback (like most other drivers do), too. Signed-off-by:
-
Takashi Iwai authored
When the parameter setup fails, the driver should propagate the error code instead of silently ignoring it. Signed-off-by:
-
Takashi Iwai authored
alsa_stream->chip can be never NULL. Signed-off-by:
-
Takashi Iwai authored
The hw_queue_size of PCM indirect helper doesn't need to be set up if you use the whole given buffer size. Drop the useless initialization, which just confuses readers. Signed-off-by:
-
Takashi Iwai authored
Some fields in alsa_stream are the values we keep already in PCM runtime object, hence they are redundant. Use the standard PCM runtime values instead of the private copies. Signed-off-by:
-
Takashi Iwai authored
The alsa_stream->lock is never used. Kill it. Signed-off-by:
-
Takashi Iwai authored
The handling of SNDRV_PCM_TRIGGER_STOP at the trigger callback is incorrect: when the STOP is issued, the driver is supposed to drop the stream immediately. Meanwhile bcm2835 driver checks the DRAINING state and tries to issue some different command. This patch straightens things a bit, dropping the incorrect state checks. The draining behavior would be still not perfect at this point, but will be improved in a later patch. Signed-off-by:
-
Takashi Iwai authored
The running flag of alsa_stream is basically useless. The running state is strictly controlled in ALSA PCM core side, hence the check in PCM trigger and close callbacks are superfluous. Also, the prefill ack at trigger start became superfluous nowadays with the ALSA PCM core update. Let's rip them off. Signed-off-by:
-
Takashi Iwai authored
All the alsa_stream->open flag checks in the current code are redundant, and they cannot be racy. For the code simplification, let's remove the flag and its check. Signed-off-by:
-
Takashi Iwai authored
bcm2835_audio_setup(), bcm2835_audio_flush_buffers() and bcm2835_audio_flush_playback_buffers() functions do implement nothing. Also, bcm2835_audio_set_ctls() is already called inside bcm2835_audio_set_params(), so the later call is superfluous. This patch removes these superfluous implementations. Signed-off-by:
-
Takashi Iwai authored
In the current code, the mute control is dealt in a special manner, modifying the current volume and saving the old volume, etc. This is inconsistent (e.g. change the volume while muted, then unmute), and way too complex. Also, the whole volume handling code has conversion between ALSA volume and raw volume values, which can lead to another inconsistency and complexity. This patch simplifies these points: - The ALSA volume value is saved in chip->volume - volume->mute saves the mute state - The mute state is evaluated only when the actual volume is passed to the hardware, bcm2835_audio_set_ctls() Signed-off-by:
-
Takashi Iwai authored
The avail_substreams bit mask is checked for the possible racy accesses, but this cannot happen in practice; i.e. the assignment and the check are superfluous. Let's rip them off. Signed-off-by:
-
Takashi Iwai authored
Only a few of them are really needed. Signed-off-by:
-
Takashi Iwai authored
The "IEC958 Playback Stream" control does basically the very same thing as "IEC958 Playback Default" redundantly. The former should have been stream-specific and restored after closing the stream, but we don't do in that way. Since it's nothing but confusion, remove this fake. Signed-off-by:
-
Takashi Iwai authored
snd-bcm2835 driver takes the lock with mutex_lock_interruptible() in all places, which don't make sense. Replace them with the simple mutex_lock(). Also taking a mutex lock right after creating it for each PCM object is nonsense, too. It cannot be racy at that point. We can get rid of it. Last but not least, initializing chip->audio_mutex at each place is error-prone. Initialize properly at creating the chip object in snd_bcm2835_create() instead. Signed-off-by:
-
Rob Herring authored
PCI host drivers have already matched on compatible strings, so checking device_type is redundant. Also, device_type is considered deprecated for FDT though we've still been requiring it for PCI hosts as it is useful for finding PCI buses. Cc: devel@driverdev.osuosl.org Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Ioana Radulescu authored
Functions port_vlans_add() and port_vlans_del() could, in theory, return an uninitialized variable. Fix this by initializing the variable in question at declaration. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
John Whitmore authored
Rename 'pDot11dInfo', this member variable of the structure ieee80211_device causes a checkpatch issue, CamelCase naming. The member has been renamed 'dot11d_info' to clear this issue. This is a coding style change which should have no impact on runtime code execution. Signed-off-by:
John Whitmore <johnfwhitmore@gmail.com> Signed-off-by:
-
John Whitmore authored
The structure rt_dot11d_info contains a memeber variable 'enabled', which causes a checkpatch issue as it is declared as being of type bool. The type of the variable has been changed to a 'u8', to clear the issue. Additionally to aid searching for the member variable in code it has been renamed from 'enabled' to 'dot11d_enabled'. These are purely coding style changes which should not impact runtime code execution. Signed-off-by:
-
John Whitmore authored
Add the required SPDX-License-Identifier to the file r8180_93cx6.h, this clears a checkpatch issue. This is a coding style change which should have no impact on runtime code execution. Signed-off-by:
-
John Whitmore authored
Remove unused definitions from the file r8180_93cx6.h. This is a coding style change which should have no impact on runtime code execution. Signed-off-by:
-
Alexey Skidanov authored
ION had supported heap debug info under /sys/kernel/debug/ion/<heap_name>. This support have been removed but some leftovers (dead code) still exist. This patch removes the existing dead code. Fixes: 15c6098c ("staging: android: ion: Remove ion_handle and ion_client") Signed-off-by:
Alexey Skidanov <alexey.skidanov@intel.com> Acked-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
-
John Whitmore authored
The function dot11d_init() was previously renamed to clear a style issue. Unfortunately the new name used, dot11d_init(), clashes with a sybmol which is exported with the same name. To correct this problem the function has been renamed to rtl8192u_dot11d_init(). Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Colin Ian King authored
Pointer 'port_priv' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: variable 'port_priv' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Rob Herring authored
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Steve Longerbeam <slongerbeam@gmail.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-media@vger.kernel.org Cc: devel@driverdev.osuosl.org Signed-off-by:
-
