- 23 Jun, 2011 16 commits
-
-
Boris Ostrovsky authored
commit e9cdd343 upstream. Commit b87cf80a added support for ARAT (Always Running APIC timer) on AMD processors that are not affected by erratum 400. This erratum is present on certain processor families and prevents APIC timer from waking up the CPU when it is in a deep C state, including C1E state. Determining whether a processor is affected by this erratum may have some corner cases and handling these cases is somewhat complicated. In the interest of simplicity we won't claim ARAT support on processor families below 0x12 and will go back to broadcasting timer when going idle. Signed-off-by:
Boris Ostrovsky <ostr@amd64.org> Link: http://lkml.kernel.org/r/1306423192-19774-1-git-send-email-ostr@amd64.orgTested-by:
Boris Petkov <borislav.petkov@amd.com> Cc: Hans Rosenfeld <Hans.Rosenfeld@amd.com> Cc: Andreas Herrmann <Andreas.Herrmann3@amd.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Samuel Thibault authored
commit fad4dab5 upstream. Commit 1292500b replaced "=m" (*field) : "1" (*field) with "=m" (*field) : with comment "The following patch fixes it by using the '+' operator on the (*field) operand, marking it as read-write to gcc." '+' was actually forgotten. This really puts it. Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by:
James Bottomley <jbottomley@parallels.com> Signed-off-by:
-
Yang Ruirui authored
commit 26626f11 upstream. Add missing page_cache_release in the error path of ext4_mb_load_buddy Signed-off-by:
Yang Ruirui <ruirui.r.yang@tieto.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Ted Ts'o authored
commit d9b01934 upstream. If an application program does not make any changes to the indirect blocks or extent tree, i_datasync_tid will not get updated. If there are enough commits (i.e., 2**31) such that tid_geq()'s calculations wrap, and there isn't a currently active transaction at the time of the fdatasync() call, this can end up triggering a BUG_ON in fs/jbd/commit.c: J_ASSERT(journal->j_running_transaction != NULL); It's pretty rare that this can happen, since it requires the use of fdatasync() plus *very* frequent and excessive use of fsync(). But with the right workload, it can. We fix this by replacing the use of tid_geq() with an equality test, since there's only one valid transaction id that is valid for us to start: namely, the currently running transaction (if it exists). Reported-by: Martin_Zielinski@McAfee.com Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit 2842bb20 upstream. In do_get_write_access() we wait on BH_Unshadow bit for buffer to get from shadow state. The waking code in journal_commit_transaction() has a bug because it does not issue a memory barrier after the buffer is moved from the shadow state and before wake_up_bit() is called. Thus a waitqueue check can happen before the buffer is actually moved from the shadow state and waiting process may never be woken. Fix the problem by issuing proper barrier. Reported-by:
Tao Ma <boyu.mt@taobao.com> Signed-off-by:
-
Jan Kara authored
commit 86c4f6d8 upstream. When make_indexed_dir() fails (e.g. because of ENOSPC) after it has allocated block for index tree root, we did not properly mark all changed buffers dirty. This lead to only some of these buffers being written out and thus effectively corrupting the directory. Fix the issue by marking all changed data dirty even in the error failure case. Signed-off-by:
-
Jiri Olsa authored
commit 26afb7c6 upstream. As reported in BZ #30352: https://bugzilla.kernel.org/show_bug.cgi?id=30352 there's a kernel bug related to reading the last allowed page on x86_64. The _copy_to_user() and _copy_from_user() functions use the following check for address limit: if (buf + size >= limit) fail(); while it should be more permissive: if (buf + size > limit) fail(); That's because the size represents the number of bytes being read/write from/to buf address AND including the buf address. So the copy function will actually never touch the limit address even if "buf + size == limit". Following program fails to use the last page as buffer due to the wrong limit check: #include <sys/mman.h> #include <sys/socket.h> #include <assert.h> #define PAGE_SIZE (4096) #define LAST_PAGE ((void*)(0x7fffffffe000)) int main() { int fds[2], err; void * ptr = mmap(LAST_PAGE, PAGE_SIZE, PROT_READ | PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE | MAP_FIXED, -1, 0); assert(ptr == LAST_PAGE); err = socketpair(AF_LOCAL, SOCK_STREAM, 0, fds); assert(err == 0); err = send(fds[0], ptr, PAGE_SIZE, 0); perror("send"); assert(err == PAGE_SIZE); err = recv(fds[1], ptr, PAGE_SIZE, MSG_WAITALL); perror("recv"); assert(err == PAGE_SIZE); return 0; } The other place checking the addr limit is the access_ok() function, which is working properly. There's just a misleading comment for the __range_not_ok() macro - which this patch fixes as well. The last page of the user-space address range is a guard page and Brian Gerst observed that the guard page itself due to an erratum on K8 cpus (#121 Sequential Execution Across Non-Canonical Boundary Causes Processor Hang). However, the test code is using the last valid page before the guard page. The bug is that the last byte before the guard page can't be read because of the off-by-one error. The guard page is left in place. This bug would normally not show up because the last page is part of the process stack and never accessed via syscalls. Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Acked-by:
Brian Gerst <brgerst@gmail.com> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1305210630-7136-1-git-send-email-jolsa@redhat.comSigned-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Felix Radensky authored
commit 431e1eca upstream. Currently mtdconcat is broken for NAND. An attemtpt to create JFFS2 filesystem on concatenation of several NAND devices fails with OOB write errors. This patch fixes that problem. Signed-off-by:
Felix Radensky <felix@embedded-sol.com> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
James Bottomley authored
commit 0a58e077 upstream. blk_cleanup_queue() calls elevator_exit() and after this, we can't touch the elevator without oopsing. __elv_next_request() must check for this state because in the refcounted queue model, we can still call it after blk_cleanup_queue() has been called. This was reported as causing an oops attributable to scsi. Signed-off-by:
James Bottomley <James.Bottomley@suse.de> Signed-off-by:
Jens Axboe <jaxboe@fusionio.com> Signed-off-by:
-
Tejun Heo authored
commit 02e35228 upstream. __blkdev_get() doesn't rescan partitions if disk->fops->open() fails, which leads to ghost partition devices lingering after medimum removal is known to both the kernel and userland. The behavior also creates a subtle inconsistency where O_NONBLOCK open, which doesn't fail even if there's no medium, clears the ghots partitions, which is exploited to work around the problem from userland. Fix it by updating __blkdev_get() to issue partition rescan after -ENOMEDIA too. This was reported in the following bz. https://bugzilla.kernel.org/show_bug.cgi?id=13029 Stable: 2.6.38 Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
David Zeuthen <zeuthen@gmail.com> Reported-by:
Martin Pitt <martin.pitt@ubuntu.com> Reported-by:
Kay Sievers <kay.sievers@vrfy.org> Tested-by:
-
Eric B Munson authored
commit ad5d5292 upstream. Commit 0837e324 fixes a situation on POWER7 where events can roll back if a specualtive event doesn't actually complete. This can raise a performance monitor exception. We need to catch this to ensure that we reset the PMC. In all cases the PMC will be less than 256 cycles from overflow. This patch lifts Anton's fix for the problem in perf and applies it to oprofile as well. Signed-off-by:
Eric B Munson <emunson@mgebm.net> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Milton Miller authored
commit 3d2cea73 upstream. Commit 1fc711f7 (powerpc/kexec: Fix race in kexec shutdown) moved the write to signal the cpu had exited the kernel from before the transition to real mode in kexec_smp_wait to kexec_wait. Unfornately it missed that kexec_wait is used both by cpus leaving the kernel and by secondary slave cpus that were not allocated a paca for what ever reason -- they could be beyond nr_cpus or not described in the current device tree for whatever reason (for example, kexec-load was not refreshed after a cpu hotplug operation). Cpus coming through that path they will write to paca[NR_CPUS] which is beyond the space allocated for the paca data and overwrite memory not allocated to pacas but very likely still real mode accessable). Move the write back to kexec_smp_wait, which is used only by cpus that found their paca, but after the transition to real mode. Signed-off-by:
Milton Miller <miltonm@bga.com> Signed-off-by:
-
steven finney authored
commit 98586ed8 upstream. When a CPU is taken offline in an SMP system, cpufreq_remove_dev() nulls out the per-cpu policy before cpufreq_stats_free_table() can make use of it. cpufreq_stats_free_table() then skips the call to sysfs_remove_group(), leaving about 100 bytes of sysfs-related memory unclaimed each time a CPU-removal occurs. Break up cpu_stats_free_table into sysfs and table portions, and call the sysfs portion early. Signed-off-by:
Steven Finney <steven.finney@palm.com> Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Jacob Shin authored
commit 27ecddc2 upstream. When we discover CPUs that are affected by each other's frequency/voltage transitions, the first CPU gets a sysfs directory created, and rest of the siblings get symlinks. Currently, when we hotplug off only the first CPU, all of the symlinks and the sysfs directory gets removed. Even though rest of the siblings are still online and functional, they are orphaned, and no longer governed by cpufreq. This patch, given the above scenario, creates a sysfs directory for the first sibling and symlinks for the rest of the siblings. Please note the recursive call, it was rather too ugly to roll it out. And the removal of redundant NULL setting (it is already taken care of near the top of the function). Signed-off-by:
Jacob Shin <jacob.shin@amd.com> Acked-by:
Mark Langsdorf <mark.langsdorf@amd.com> Reviewed-by:
Thomas Renninger <trenn@suse.de> Signed-off-by:
-
Catalin Marinas authored
commit 52c3ce4e upstream. The kmemleak_seq_next() function tries to get an object (and increment its use count) before returning it. If it could not get the last object during list traversal (because it may have been freed), the function should return NULL rather than a pointer to such object that it did not get. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Reported-by:
Phil Carmody <ext-phil.2.carmody@nokia.com> Acked-by:
-
Steven Rostedt authored
commit 058e297d upstream. If function tracing is enabled, a read of the filter files will cause the call to stop_machine to update the function trace sites. It should only call stop_machine on write. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
- 23 May, 2011 22 commits
-
-
Greg Kroah-Hartman authored
-
Ben Hutchings authored
Commit c23a103f wrongly introduced references to the unified firmware file "phanfw.bin", which is not supported by netxen in 2.6.32. The driver reports this filename when loading firmware from flash, and includes a MODULE_FIRMWARE hint for the filename even though it will never use it. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Thomas Jarosch authored
commit ebde6f8a upstream. During initialization of vmxnet3, the state of LRO gets out of sync with netdev->features. This leads to very poor TCP performance in a IP forwarding setup and is hitting many VMware users. Simplified call sequence: 1. vmxnet3_declare_features() initializes "adapter->lro" to true. 2. The kernel automatically disables LRO if IP forwarding is enabled, so vmxnet3_set_flags() gets called. This also updates netdev->features. 3. Now vmxnet3_setup_driver_shared() is called. "adapter->lro" is still set to true and LRO gets enabled again, even though netdev->features shows it's disabled. Fix it by updating "adapter->lro", too. The private vmxnet3 adapter flags are scheduled for removal in net-next, see commit a0d2730c "net: vmxnet3: convert to hw_features". Patch applies to 2.6.37 / 2.6.38 and 2.6.39-rc6. Please CC: comments. Signed-off-by:
Thomas Jarosch <thomas.jarosch@intra2net.com> Acked-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Bjørn Mork authored
commit 98cb7e44 upstream. The ioc->sgl[i].iov_len value is supplied by the ioctl caller, and can be zero in some cases. Assume that's valid and continue without error. Fixes (multiple individual reports of the same problem for quite a while): http://marc.info/?l=linux-ide&m=128941801715301 http://bugs.debian.org/604627 http://www.mail-archive.com/linux-poweredge@dell.com/msg02575.html megasas: Failed to alloc kernel SGL buffer for IOCTL and [ 69.162538] ------------[ cut here ]------------ [ 69.162806] kernel BUG at /build/buildd/linux-2.6.32/lib/swiotlb.c:368! [ 69.163134] invalid opcode: 0000 [#1] SMP [ 69.163570] last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map [ 69.163975] CPU 0 [ 69.164227] Modules linked in: fbcon tileblit font bitblit softcursor vga16fb vgastate ioatdma radeon ttm drm_kms_helper shpchp drm i2c_algo_bit lp parport floppy pata_jmicron megaraid_sas igb dca [ 69.167419] Pid: 1206, comm: smartctl Tainted: G W 2.6.32-25-server #45-Ubuntu X8DTN [ 69.167843] RIP: 0010:[<ffffffff812c4dc5>] [<ffffffff812c4dc5>] map_single+0x255/0x260 [ 69.168370] RSP: 0018:ffff88081c0ebc58 EFLAGS: 00010246 [ 69.168655] RAX: 000000000003bffc RBX: 00000000ffffffff RCX: 0000000000000002 [ 69.169000] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88001dffe000 [ 69.169346] RBP: ffff88081c0ebcb8 R08: 0000000000000000 R09: ffff880000030840 [ 69.169691] R10: 0000000000100000 R11: 0000000000000000 R12: 0000000000000000 [ 69.170036] R13: 00000000ffffffff R14: 0000000000000001 R15: 0000000000200000 [ 69.170382] FS: 00007fb8de189720(0000) GS:ffff88001de00000(0000) knlGS:0000000000000000 [ 69.170794] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 69.171094] CR2: 00007fb8dd59237c CR3: 000000081a790000 CR4: 00000000000006f0 [ 69.171439] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 69.171784] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 69.172130] Process smartctl (pid: 1206, threadinfo ffff88081c0ea000, task ffff88081a760000) [ 69.194513] Stack: [ 69.205788] 0000000000000034 00000002817e3390 0000000000000000 ffff88081c0ebe00 [ 69.217739] <0> 0000000000000000 000000000003bffc 0000000000000000 0000000000000000 [ 69.241250] <0> 0000000000000000 00000000ffffffff ffff88081c5b4080 ffff88081c0ebe00 [ 69.277310] Call Trace: [ 69.289278] [<ffffffff812c52ac>] swiotlb_alloc_coherent+0xec/0x130 [ 69.301118] [<ffffffff81038b31>] x86_swiotlb_alloc_coherent+0x61/0x70 [ 69.313045] [<ffffffffa002d0ce>] megasas_mgmt_fw_ioctl+0x1ae/0x690 [megaraid_sas] [ 69.336399] [<ffffffffa002d748>] megasas_mgmt_ioctl_fw+0x198/0x240 [megaraid_sas] [ 69.359346] [<ffffffffa002f695>] megasas_mgmt_ioctl+0x35/0x50 [megaraid_sas] [ 69.370902] [<ffffffff81153b12>] vfs_ioctl+0x22/0xa0 [ 69.382322] [<ffffffff8115da2a>] ? alloc_fd+0x10a/0x150 [ 69.393622] [<ffffffff81153cb1>] do_vfs_ioctl+0x81/0x410 [ 69.404696] [<ffffffff8155cc13>] ? do_page_fault+0x153/0x3b0 [ 69.415761] [<ffffffff811540c1>] sys_ioctl+0x81/0xa0 [ 69.426640] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b [ 69.437491] Code: fe ff ff 48 8b 3d 74 38 76 00 41 bf 00 00 20 00 e8 51 f5 d7 ff 83 e0 ff 48 05 ff 07 00 00 48 c1 e8 0b 48 89 45 c8 e9 13 fe ff ff <0f> 0b eb fe 0f 1f 80 00 00 00 00 55 48 89 e5 48 83 ec 20 4c 89 [ 69.478216] RIP [<ffffffff812c4dc5>] map_single+0x255/0x260 [ 69.489668] RSP <ffff88081c0ebc58> [ 69.500975] ---[ end trace 6a2181b634e2abc7 ]--- Reported-by:
Bokhan Artem <aptem@ngs.ru> Reported by: Marc-Christian Petersen <m.c.p@gmx.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Cc: Michael Benz <Michael.Benz@lsi.com> Signed-off-by:
-
Julia Lawall authored
commit d9a5ac9e upstream. b may be added to a list, but is not removed before being freed in the case of an error. This is done in the corresponding deallocation function, so the code here has been changed to follow that. The sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E,E1,E2; identifier l; @@ *list_add(&E->l,E1); ... when != E1 when != list_del(&E->l) when != list_del_init(&E->l) when != E = E2 *kfree(E);// </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Link: http://lkml.kernel.org/r/1305294731-12127-1-git-send-email-julia@diku.dkSigned-off-by:
-
Youquan Song authored
commit e503f9e4 upstream. This patch fixes a bug reported by a customer, who found that many unreasonable error interrupts reported on all non-boot CPUs (APs) during the system boot stage. According to Chapter 10 of Intel Software Developer Manual Volume 3A, Local APIC may signal an illegal vector error when an LVT entry is set as an illegal vector value (0~15) under FIXED delivery mode (bits 8-11 is 0), regardless of whether the mask bit is set or an interrupt actually happen. These errors are seen as error interrupts. The initial value of thermal LVT entries on all APs always reads 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI sequence to them and LVT registers are reset to 0s except for the mask bits which are set to 1s when APs receive INIT IPI. When the BIOS takes over the thermal throttling interrupt, the LVT thermal deliver mode should be SMI and it is required from the kernel to keep AP's LVT thermal monitoring register programmed as such as well. This issue happens when BIOS does not take over thermal throttling interrupt, AP's LVT thermal monitor register will be restored to 0x10000 which means vector 0 and fixed deliver mode, so all APs will signal illegal vector error interrupts. This patch check if interrupt delivery mode is not fixed mode before restoring AP's LVT thermal monitor register. Signed-off-by:
Youquan Song <youquan.song@intel.com> Acked-by:
Suresh Siddha <suresh.b.siddha@intel.com> Acked-by:
Yong Wang <yong.y.wang@intel.com> Cc: hpa@linux.intel.com Cc: joe@perches.com Cc: jbaron@redhat.com Cc: trenn@suse.de Cc: kent.liu@intel.com Cc: chaohong.guo@intel.com Link: http://lkml.kernel.org/r/1303402963-17738-1-git-send-email-youquan.song@intel.comSigned-off-by:
-
Thomas Gleixner authored
commit 07f4beb0 upstream. The first cpu which switches from periodic to oneshot mode switches also the broadcast device into oneshot mode. The broadcast device serves as a backup for per cpu timers which stop in deeper C-states. To avoid starvation of the cpus which might be in idle and depend on broadcast mode it marks the other cpus as broadcast active and sets the brodcast expiry value of those cpus to the next tick. The oneshot mode broadcast bit for the other cpus is sticky and gets only cleared when those cpus exit idle. If a cpu was not idle while the bit got set in consequence the bit prevents that the broadcast device is armed on behalf of that cpu when it enters idle for the first time after it switched to oneshot mode. In most cases that goes unnoticed as one of the other cpus has usually a timer pending which keeps the broadcast device armed with a short timeout. Now if the only cpu which has a short timer active has the bit set then the broadcast device will not be armed on behalf of that cpu and will fire way after the expected timer expiry. In the case of Christians bug report it took ~145 seconds which is about half of the wrap around time of HPET (the limit for that device) due to the fact that all other cpus had no timers armed which expired before the 145 seconds timeframe. The solution is simply to clear the broadcast active bit unconditionally when a cpu switches to oneshot mode after the first cpu switched the broadcast device over. It's not idle at that point otherwise it would not be executing that code. [ I fundamentally hate that broadcast crap. Why the heck thought some folks that when going into deep idle it's a brilliant concept to switch off the last device which brings the cpu back from that state? ] Thanks to Christian for providing all the valuable debug information! Reported-and-tested-by:
Christian Hoffmann <email@christianhoffmann.info> Cc: John Stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/%3Calpine.LFD.2.02.1105161105170.3078%40ionos%3ESigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
john stultz authored
commit e05b2efb upstream. Christian Hoffmann reported that the command line clocksource override with acpi_pm timer fails: Kernel command line: <SNIP> clocksource=acpi_pm hpet clockevent registered Switching to clocksource hpet Override clocksource acpi_pm is not HRT compatible. Cannot switch while in HRT/NOHZ mode. The watchdog code is what enables CLOCK_SOURCE_VALID_FOR_HRES, but we actually end up selecting the clocksource before we enqueue it into the watchdog list, so that's why we see the warning and fail to switch to acpi_pm timer as requested. That's particularly bad when we want to debug timekeeping related problems in early boot. Put the selection call last. Reported-by:
John Stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/%3C1304558210.2943.24.camel%40work-vm%3ESigned-off-by:
-
Borislav Petkov authored
commit 14fb57dc upstream. Trying to enable the local APIC timer on early K8 revisions uncovers a number of other issues with it, in conjunction with the C1E enter path on AMD. Fixing those causes much more churn and troubles than the benefit of using that timer brings so don't enable it on K8 at all, falling back to the original functionality the kernel had wrt to that. Reported-and-bisected-by:
Nick Bowler <nbowler@elliptictech.com> Cc: Boris Ostrovsky <Boris.Ostrovsky@amd.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Hans Rosenfeld <hans.rosenfeld@amd.com> Cc: Nick Bowler <nbowler@elliptictech.com> Cc: Joerg-Volker-Peetz <jvpeetz@web.de> Signed-off-by:
-
Borislav Petkov authored
commit 328935e6 upstream. This reverts commit e20a2d20, as it crashes certain boxes with specific AMD CPU models. Moving the lower endpoint of the Erratum 400 check to accomodate earlier K8 revisions (A-E) opens a can of worms which is simply not worth to fix properly by tweaking the errata checking framework: * missing IntPenging MSR on revisions < CG cause #GP: http://marc.info/?l=linux-kernel&m=130541471818831 * makes earlier revisions use the LAPIC timer instead of the C1E idle routine which switches to HPET, thus not waking up in deeper C-states: http://lkml.org/lkml/2011/4/24/20 Therefore, leave the original boundary starting with K8-revF. Signed-off-by:
-
Jeff Layton authored
commit 221d1d79 upstream. The is_path_accessible check uses a QPathInfo call, which isn't supported by ancient win9x era servers. Fall back to an older SMBQueryInfo call if it fails with the magic error codes. Reported-and-Tested-by:
Sandro Bonazzola <sandro.bonazzola@gmail.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <sfrench@us.ibm.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit cf7e032f upstream. Changeset b6114794 ("zorro8390: convert to net_device_ops") broke zorro8390 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in zorro8390.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa8 ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa ("mac8390: fix build with NET_POLL_CONTROLLER"). Reported-by:
Christian T. Steigies <cts@debian.org> Suggested-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Tested-by:
-
Paul Fox authored
commit 2ae1b8b3 upstream. We occasionally see list corruption using libertas. While we haven't been able to diagnose this precisely, we have spotted a possible cause: cmdpendingq is generally modified with driver_lock held. However, there are a couple of points where this is not the case. Fix up those operations to execute under the lock, it seems like the correct thing to do and will hopefully improve the situation. Signed-off-by:
Paul Fox <pgf@laptop.org> Signed-off-by:
Daniel Drake <dsd@laptop.org> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit 0b25e015 upstream. Changeset 5618f0d1 ("hydra: convert to net_device_ops") broke hydra by adding 8390.o to the link. That meant that lib8390.c was included twice, once in hydra.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa8 ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa ("mac8390: fix build with NET_POLL_CONTROLLER"). Signed-off-by:
-
Geert Uytterhoeven authored
commit 2592a735 upstream. Changeset dcd39c90 ("ne-h8300: convert to net_device_ops") broke ne-h8300 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in ne-h8300.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa8 ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa ("mac8390: fix build with NET_POLL_CONTROLLER"). Signed-off-by:
-
Matvejchikov Ilya authored
commit 057bef93 upstream. TTY layer expects 0 if the ldisc->open operation succeeded. Signed-off-by : Matvejchikov Ilya <matvejchikov@gmail.com> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Kleber Sacilotto de Souza authored
commit dcbe14b9 upstream. Currently EHEA reports to ethtool as supporting 10M, 100M, 1G and 10G and connected to FIBRE independent of the hardware configuration. However, when connected to FIBRE the only supported speed is 10G full-duplex, and the other speeds and modes are only supported when connected to twisted pair. Signed-off-by:
Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Acked-by:
Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by:
-
john stultz authored
Currently with 2.6.32-longterm, its possible for time() to occasionally return values one second earlier then the previous time() call. This happens because update_xtime_cache() does: xtime_cache = xtime; timespec_add_ns(&xtime_cache, nsec); Its possible that xtime is 1sec,999msecs, and nsecs is 1ms, resulting in a xtime_cache that is 2sec,0ms. get_seconds() (which is used by sys_time()) does not take the xtime_lock, which is ok as the xtime.tv_sec value is a long and can be atomically read safely. The problem occurs the next call to update_xtime_cache() if xtime has not increased: /* This sets xtime_cache back to 1sec, 999msec */ xtime_cache = xtime; /* get_seconds, calls here, and sees a 1second inconsistency */ timespec_add_ns(&xtime_cache, nsec); In order to resolve this, we could add locking to get_seconds(), but it needs to be lock free, as it is called from the machine check handler, opening a possible deadlock. So instead, this patch introduces an intermediate value for the calculations, so that we only assign xtime_cache once with the correct time, using ACCESS_ONCE to make sure the compiler doesn't optimize out any intermediate values. The xtime_cache manipulations were removed with 2.6.35, so that kernel and later do not need this change. In 2.6.33 and 2.6.34 the logarithmic accumulation should make it so xtime is updated each tick, so it is unlikely that two updates to xtime_cache could occur while the difference between xtime and xtime_cache crosses the second boundary. However, the paranoid might want to pull this into 2.6.33/34-longterm just to be sure. Thanks to Stephen for helping finally narrow down the root cause and many hours of help with testing and validation. Also thanks to Max, Andi, Eric and Paul for review of earlier attempts and helping clarify what is possible with regard to out of order execution. Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Pavel Shilovsky authored
commit 4906e50b upstream. While password processing we can get out of options array bound if the next character after array is delimiter. The patch adds a check if we reach the end. Signed-off-by:
Pavel Shilovsky <piastry@etersoft.ru> Reviewed-by:
-
Dan Rosenberg authored
commit a2948659 upstream. A length of zero (after subtracting two for the type and len fields) for the DCCPO_{CHANGE,CONFIRM}_{L,R} options will cause an underflow due to the subtraction. The subsequent code may read past the end of the options value buffer when parsing. I'm unsure of what the consequences of this might be, but it's probably not good. Signed-off-by:
Dan Rosenberg <drosenberg@vsecurity.com> Acked-by:
Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
-
Timo Warns authored
commit fa039d5f upstream. Otherwise corrupted EFI partition tables can cause total confusion. Signed-off-by:
Timo Warns <warns@pre-sense.de> Signed-off-by:
-
Jeff Layton authored
commit fcda7f45 upstream. It's possible that when we go to decode the string area in the SESSION_SETUP response, that bytes_remaining will be 0. Decrementing it at that point will mean that it can go "negative" and wrap. Check for a bytes_remaining value of 0, and don't try to decode the string area if that's the case. Reported-and-Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
- 09 May, 2011 2 commits
-
-
Greg Kroah-Hartman authored
-
James Bottomley authored
commit c055f5b2 upstream. The recent commit closing the race window in device teardown: commit 86cbfb56 Author: James Bottomley <James.Bottomley@suse.de> Date: Fri Apr 22 10:39:59 2011 -0500 [SCSI] put stricter guards on queue dead checks is causing a potential NULL deref in scsi_run_queue() because the q->queuedata may already be NULL by the time this function is called. Since we shouldn't be running a queue that is being torn down, simply add a NULL check in scsi_run_queue() to forestall this. Tested-by:
Jim Schutt <jaschut@sandia.gov> Signed-off-by:
-
