This is an update for the saa7134 driver.  Changes:


* add support for more TV cards, as usual ;)

* add support for image cropping.

* use v4l2 API to talk to the tuner chips (thus it depends on the
  tuner/tda9887 patch).

* fixes for the audio carrier scan.

* make transport stream packet size configurable.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch updates the ir-kbd-gpio and ir-kbd-i2c drivers.  Nothing major,
just some keytable fixes and support for more hardware.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This is a update of the bttv driver.  Changes:

* some card-specific fixes + new cards.

* separate buffer switching for video frames and vbi data, that should make
  bttv less sensitive to high irq latencies.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This is a big update for the tuner and tda9887 modules which are used for TV
card tuning.

The tda9887 module is basically completely rewritten and understands all the
config bits now instead of having just some fixed config presets.  Some of
these config bits can be changed by insmod options now.

The other big change is that both modules allow to use the V4L2 API for
inter-module communication (i.e.  when bttv/saa7134/...  pass through the
tuning ioctls to the modules).  That allows to specify the TV norm more
precisely (not just PAL but PAL-I, PAL-BG, ...), which is needed in some cases
to make TV audio work correctly.  Using the old v4l1 API is still possible so
this shouldn't break any users of these two modules.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Some minor changes for the ir-common module: Update for the RC5 keytable and
increase the IR_KEYTAB_SIZE #define.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch has some cleanups for the msp3400 module: Balance is used directly
now instead of maintaining the state as left/right volume and calculate the
balance from that.  The msp3400 did that only for historical reasons and it
isn't needed any more ...

Credits for that go to Perry Gilfillan.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch has some minor bugfixes for the video-buf module.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch adds some magic IDs and checks for them to the data structs of the
video-buf module.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch updates the video-buf module to support the per-frame input
switching added by the v4l2 API patch.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch has some minor updates to v4l2 API:

* A new pixel format (V4L2_PIX_FMT_SBGGR8).

* Adds some #defines for tv norms for convenience.

* Allow to specify the video source to capture from on a per-frame basis.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch is from James, I've changed it slightly only.

The problem is that some IOMMU implementations have a maximum limit to the
size of the number of contiguously mappable pages (admittedly, this limit
is mostly in the resource management algorithms rather than the IOMMUs
themselves).

This patch adds this concept to the bio layer via the parameter

BIO_VMERGE_MAX_SIZE

which architectures can define in asm/io.h (if undefined, we assume it to
be infinite, which is current behaviour).

While adding this, I noticed several places where bio was making incorrect
assumptions about virtual mergeability (none of which was a bug: bio was
overestimating rather than underestimating).

- The worst offender was bio_add_page(), which seemed never to check for
  virtual mergeability

- I also fixed blk_hw_contig_segments() not to check the QUEUE_CLUSTER
  flag, and not to check the phys segment boundary.

In order to track the hw segment size across bios, I had to introduce two
extra bio parameters: bi_hw_front_size and bi_hw_back_size which store the
sizes of the front and back hw contiguous segments (and which will be equal
if there's only one hw segment).  When the bio is merged into a request,
these fields are updated with the total hw contig size so they can always
be used to assess if the merger would violate the BIO_VMERGE_MAX_SIZE
parameter.
Signed-Off-By: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch defines a macro that does exactly what
wait_event_interruptible() does except that it adds the current task to the
wait queue as an exclusive task (i.e., sets the WQ_FLAG_EXCLUSIVE flag)
rather than as a non-exclusive task as wait_event_interruptible() does.

This allows one to do a wake_up_nr() to wake up a specific number of tasks.
 I'm in the process of submitting a patch to linux-ia64 that requires this
capability.  (Its subject line is "[PATCH 3/4] SGI Altix cross partition
functionality".)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Cleanup arch/i386/kernel/setup.c a little bit by:

* un-inlining machine_specific_memory_setup() (it's implementations are
  pretty big to be inlined anyway)

* remove setup_memory_region() by moving the code inside setup_arch()

I would also recommend BK-renaming all four files
(include/asm-i386/*/setup_arch_post.h) to ".c" and moving them into
arch/i386/*/, but that obviously is not needed in anyway.  But IMHO they
are clearly ".c" files, not ".h" files.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch adds a new driver for the OmniVision OV6xx0 and OV7xx0 series of
CMOS image sensors.  It is currently used by the w9968cf USB webcam driver,
which is already in mainline 2.6.  Up until now it had to be compiled
outside the kernel tree, which is clearly suboptimal.

It is also used by version 2 of the ov511 USB webcam driver, which will be
merged in the near future.  That will reduce some code duplication, since
the existing ov511 has much of this code built-in.

This was previously submitted to Linux-USB-Devel, and I have fixed the
concerns that came up at that time.

Developer's Certificate of Origin 1.0

By making a contribution to this project, I certify that:

(a) The contribution was created in whole or in part by me and I
        have the right to submit it under the open source license
        indicated in the file; or

(b) The contribution is based upon previous work that, to the best
        of my knowledge, is covered under an appropriate open source
        license and I have the right under that license to submit that
        work with modifications, whether created in whole or in part
        by me, under the same open source license (unless I am
        by me, under the same open source license (unless I am
        permitted to submit under a different license), as indicated
        in the file; or

(c) The contribution was provided directly to me by some other
        person who certified (a), (b) or (c) and I have not modified
        it.
Signed-off-by: Mark McClelland <mark@alpha.dyndns.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

People like to use swapoff/swapon as a way of restoring their VM to a
predictable "preconditional" state.

Problem is, swapoff leaves mapped anon/pagecache pages on the inactive list,
so they immediately get swapped out again when swapspace becomes available.

Let's move these pages onto the active list to the VM has to again decide
whether to swap them out.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

But Al fixed it again.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Allow receive and write_wakeup callbacks to be called at hard interrupt
context and/or with interrupts disabled (removes softirq warning).

This mirrors changes by Paul Mackerras to ppp_async.c for the same purpose.
Patch has been previously posted for comments and has been tested with
success by multiple persons.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch adds support for the O_NOATIME open flag (GNU extension):

int O_NOATIME  	Macro
  If this bit is set, read will not update the access time of the file.
  See File Times. This is used by programs that do backups, so that
  backing a file up does not count as reading it. Only the owner of the
  file or the superuser may use this bit.

It is useful if you want to do something with the file atime (for instance,
moving files that have not been accessed in a while to somewhere else, or
something like Debian's popularity-contest) but you also want to read all
files periodically (for instance, tripwire or debsums).

Currently, the program that reads all files periodically has to use utimes,
which can race with the atime update:

    A               B
  open
  fstat
  read
                  open
                  read
                  close
  close
  utimes

And the file still has the old atime, instead of the new one from when B
did the read from it.  This problem does not happen if A uses O_NOATIME
instead of utimes to preserve the atime.

This patch adds the O_NOATIME constant for all architectures, but it would
also be possible to add it one architecture at a time by defining it to 0
when not defined in asm-*.

Based on patch by Marek Michalkiewicz <marekm@i17linuxb.ists.pwr.wroc.pl> at
http://www.uwsg.iu.edu/hypermail/linux/kernel/9811.2/0118.htmlSigned-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Here's a patch to allocate memory for big system hash tables with the
bootmem allocator rather than with main page allocator.

It is needed for three reasons:

(1) So that the size can be bigger than MAX_ORDER.  IBM have done some
    testing on their big PPC64 systems (64GB of RAM) with linux-2.4 and found
    that they get better performance if the sizes of the inode cache hash,
    dentry cache hash, buffer head hash and page cache hash are increased
    beyond MAX_ORDER (order 11).

     Now the main allocator can't allocate anything larger than MAX_ORDER, but
     the bootmem allocator can.

     In 2.6 it appears that only the inode and dentry hashes remain of those
     four, but there are other hash tables that could use this service.

(2) Changing MAX_ORDER appears to have a number of effects beyond just
    limiting the maximum size that can be allocated in one go.

(3) Should someone want a hash table in which each bucket isn't a power of
    two in size, memory will be wasted as the chunk of memory allocated will
    be a power of two in size (to hold a power of two number of buckets).

    On the other hand, using the bootmem allocator means the allocation
    will only take up sufficient pages to hold it, rather than the next power
    of two up.

    Admittedly, this point doesn't apply to the dentry and inode hashes,
    but it might to another hash table that might want to use this service.


I've coelesced the meat of the inode and dentry allocation routines into
one such routine in mm/page_alloc.c that the the respective initialisation
functions now call before mem_init() is called.

This routine gets it's approximation of memory size by counting up the
ZONE_NORMAL and ZONE_DMA pages (and ZONE_HIGHMEM if requested) in all the
nodes passed to the main allocator by paging_init() (or wherever the arch
does it).  It does not use max_low_pfn as that doesn't seem to be available
on all archs, and it doesn't use num_physpages since that includes highmem
pages not available to the kernel for allocating data structures upon -
which may not be appropriate when calculating hash table size.

On the off chance that the size of each hash bucket may not be exactly a
power of two, the routine will only allocate as many pages as is necessary
to ensure that the number of buckets is exactly a power of two, rather than
allocating the smallest power-of-two sized chunk of memory that will hold
the same array of buckets.

The maximum size of any single hash table is given by
MAX_SYS_HASH_TABLE_ORDER, as is now defined in linux/mmzone.h.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

enable read prefetching on O2micro bridges. It fixes the problems
seen with the RME Hammerfall DSP.
Thanks to Eric Still from O2micro for the input.

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Example code for the new DMI APU - port HP Pavilion irq workaround to new
DMI probing.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch creates and exports 2 functions which can be used by the rest of
kernel code to perform DMI data checks:

- dmi_check_system() function checks system DMI data against given blacklist
  table and on each match runs corresponding callback function;

- dmi_get_system_info() function returns DMI data value.  Useful for people
  wanting more complex DMI data check than simple string match.

Also filling unused match entries with NO_MATCH made optional, but existing
NO_MATCH occurences are left intact, so people are free to continue dmi_scan.c
patching without massive reject problems.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

In file included from include/asm/io.h:365,
                 from drivers/video/kyro/STG4000Reg.h:23,
                 from drivers/video/kyro/STG4000Ramdac.c:16:
include/asm/eeh.h:58: warning: `struct device_node' declared inside parameter list
include/asm/eeh.h:58: warning: its scope is only this definition or declaration, which is probably not what you want
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

With CONFIG_ALTIVEC=n, flush_altivec_to_thread() has no implementation.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into nuts.davemloft.net:/disk1/BK/net-2.6

Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

This one also removes the duplicate can_coalesce in tcp.c and makes it
use skb_can_coalesce.
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

into nuts.davemloft.net:/disk1/BK/net-2.6

into nuts.davemloft.net:/disk1/BK/acme-2.6

into kernel.bkbits.net:/home/davem/sparc-2.6

We might have to clear the flag, and if we do not
then subsequent syscalls can get confused.

Bug easily triggered by suspending emacs in a pty
and then resuming, select() returns due to a pending
signal but because _TIF_SYSCALL_SUCCESS is erroneously
set by a previous syscall -514 ends up slipping into
userspace.  Oops.

M68k I/O abstraction updates:
  - Make I/O ports and addresses `unsigned long'
  - Add casts to make operations warning-compatible with other archs
  - Add {in,out}[wl]_p() and {in,out}l(), which are needed for some drivers
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

M68k: Add missing atomic operations (from Roman Zippel and me) and replace
`__inline__' by `inline' while we're at it.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Mac IOP: Fix copy-and-paste bug (found by OPERA, reported by Zhenmin Li,
confirmed by Brad Boyer)
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

M68k: Make sparse work
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Mac Sonic Ethernet: Kill duplicate `MODULE_LICENSE("GPL");' (already defined in
included sonic.c) which causes a compile failure
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

AFFS: Fix oops on write after remount (from Roman Zippel):
  - Allocate/free bitmap as necessary
  - Remove last uses of SF_READONLY
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>