- 21 Nov, 2014 23 commits
-
-
Alex Deucher authored
commit f0d7bfb9 upstream. Need to unlock the crtc after updating the blanking state. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johannes Berg authored
commit b8fff407 upstream. Upon receiving the last fragment, all but the first fragment are freed, but the multicast check for statistics at the end of the function refers to the current skb (the last fragment) causing a use-after-free bug. Since multicast frames cannot be fragmented and we check for this early in the function, just modify that check to also do the accounting to fix the issue. Reported-by:
Yosef Khyal <yosefx.khyal@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Herbert Xu authored
commit 3ce9b20f upstream. When VLAN is in use in macvtap_put_user, we end up setting csum_start to the wrong place. The result is that the whoever ends up doing the checksum setting will corrupt the packet instead of writing the checksum to the expected location, usually this means writing the checksum with an offset of -4. This patch fixes this by adjusting csum_start when VLAN tags are detected. Fixes: f09e2249 ("macvtap: restore vlan header on user read") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Emmanuel Grumbach authored
commit 9180ac50 upstream. The LTR is the handshake between the device and the root complex about the latency allowed when the bus exits power save. This configuration was missing and this led to high latency in the link power up. The end user could experience high latency in the network because of this. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Ilya Dryomov authored
commit aaef3170 upstream. Large (greater than 32k, the value of PAGE_ALLOC_COSTLY_ORDER) auth tickets will have their buffers vmalloc'ed, which leads to the following crash in crypto: [ 28.685082] BUG: unable to handle kernel paging request at ffffeb04000032c0 [ 28.686032] IP: [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80 [ 28.686032] PGD 0 [ 28.688088] Oops: 0000 [#1] PREEMPT SMP [ 28.688088] Modules linked in: [ 28.688088] CPU: 0 PID: 878 Comm: kworker/0:2 Not tainted 3.17.0-vm+ #305 [ 28.688088] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 28.688088] Workqueue: ceph-msgr con_work [ 28.688088] task: ffff88011a7f9030 ti: ffff8800d903c000 task.ti: ffff8800d903c000 [ 28.688088] RIP: 0010:[<ffffffff81392b42>] [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80 [ 28.688088] RSP: 0018:ffff8800d903f688 EFLAGS: 00010286 [ 28.688088] RAX: ffffeb04000032c0 RBX: ffff8800d903f718 RCX: ffffeb04000032c0 [ 28.688088] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8800d903f750 [ 28.688088] RBP: ffff8800d903f688 R08: 00000000000007de R09: ffff8800d903f880 [ 28.688088] R10: 18df467c72d6257b R11: 0000000000000000 R12: 0000000000000010 [ 28.688088] R13: ffff8800d903f750 R14: ffff8800d903f8a0 R15: 0000000000000000 [ 28.688088] FS: 00007f50a41c7700(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000 [ 28.688088] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 28.688088] CR2: ffffeb04000032c0 CR3: 00000000da3f3000 CR4: 00000000000006b0 [ 28.688088] Stack: [ 28.688088] ffff8800d903f698 ffffffff81392ca8 ffff8800d903f6e8 ffffffff81395d32 [ 28.688088] ffff8800dac96000 ffff880000000000 ffff8800d903f980 ffff880119b7e020 [ 28.688088] ffff880119b7e010 0000000000000000 0000000000000010 0000000000000010 [ 28.688088] Call Trace: [ 28.688088] [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40 [ 28.688088] [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40 [ 28.688088] [<ffffffff81395d32>] blkcipher_walk_done+0x182/0x220 [ 28.688088] [<ffffffff813990bf>] crypto_cbc_encrypt+0x15f/0x180 [ 28.688088] [<ffffffff81399780>] ? crypto_aes_set_key+0x30/0x30 [ 28.688088] [<ffffffff8156c40c>] ceph_aes_encrypt2+0x29c/0x2e0 [ 28.688088] [<ffffffff8156d2a3>] ceph_encrypt2+0x93/0xb0 [ 28.688088] [<ffffffff8156d7da>] ceph_x_encrypt+0x4a/0x60 [ 28.688088] [<ffffffff8155b39d>] ? ceph_buffer_new+0x5d/0xf0 [ 28.688088] [<ffffffff8156e837>] ceph_x_build_authorizer.isra.6+0x297/0x360 [ 28.688088] [<ffffffff8112089b>] ? kmem_cache_alloc_trace+0x11b/0x1c0 [ 28.688088] [<ffffffff8156b496>] ? ceph_auth_create_authorizer+0x36/0x80 [ 28.688088] [<ffffffff8156ed83>] ceph_x_create_authorizer+0x63/0xd0 [ 28.688088] [<ffffffff8156b4b4>] ceph_auth_create_authorizer+0x54/0x80 [ 28.688088] [<ffffffff8155f7c0>] get_authorizer+0x80/0xd0 [ 28.688088] [<ffffffff81555a8b>] prepare_write_connect+0x18b/0x2b0 [ 28.688088] [<ffffffff81559289>] try_read+0x1e59/0x1f10 This is because we set up crypto scatterlists as if all buffers were kmalloc'ed. Fix it. Signed-off-by:
Ilya Dryomov <idryomov@redhat.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Max Filippov authored
commit 2651cc69 upstream. Userspace actually passes single parameter (path name) to the umount syscall, so new umount just fails. Fix it by requesting old umount syscall implementation and re-wiring umount to it. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit 1a290581 upstream. M-audio FastTrack Ultra quirk doesn't release the kzalloc'ed memory. This patch adds the private_free callback to release it properly. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Tejun Heo authored
commit 66a7cbc3 upstream. Samsung pci-e SSDs on macbooks failed miserably on NCQ commands, so 67809f85 ("ahci: disable NCQ on Samsung pci-e SSDs on macbooks") disabled NCQ on them. It turns out that NCQ is fine as long as MSI is not used, so let's turn off MSI and leave NCQ on. Signed-off-by:
Tejun Heo <tj@kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=60731 Tested-by: <dorin@i51.org> Tested-by:
Imre Kaloz <kaloz@openwrt.org> Fixes: 67809f85 ("ahci: disable NCQ on Samsung pci-e SSDs on macbooks") Signed-off-by:
-
James Ralston authored
commit 690000b9 upstream. This patch adds the AHCI-mode SATA Device IDs for the Intel Sunrise Point PCH. Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
-
Miklos Szeredi authored
commit 799b6014 upstream. Audit rules disappear when an inode they watch is evicted from the cache. This is likely not what we want. The guilty commit is "fsnotify: allow marks to not pin inodes in core", which didn't take into account that audit_tree adds watches with a zero mask. Adding any mask should fix this. Fixes: 90b1e7a5 ("fsnotify: allow marks to not pin inodes in core") Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
commit 81f49a8f upstream. is_compat_task() is the wrong check for audit arch; the check should be is_ia32_task(): x32 syscalls should be AUDIT_ARCH_X86_64, not AUDIT_ARCH_I386. CONFIG_AUDITSYSCALL is currently incompatible with x32, so this has no visible effect. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/a0138ed8c709882aec06e4acc30bfa9b623b8717.1409954077.git.luto@amacapital.netSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Andreas Larsson authored
[ Upstream commit 1a17fdc4 ] Atomicity between xchg and cmpxchg cannot be guaranteed when xchg is implemented with a swap and cmpxchg is implemented with locks. Without this, e.g. mcs_spin_lock and mcs_spin_unlock are broken. Signed-off-by:
Andreas Larsson <andreas@gaisler.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit ab5c7809 ] Otherwise rcu_irq_{enter,exit}() do not happen and we get dumps like: ==================== [ 188.275021] =============================== [ 188.309351] [ INFO: suspicious RCU usage. ] [ 188.343737] 3.18.0-rc3-00068-g20f3963d-dirty #54 Not tainted [ 188.394786] ------------------------------- [ 188.429170] include/linux/rcupdate.h:883 rcu_read_lock() used illegally while idle! [ 188.505235] other info that might help us debug this: [ 188.554230] RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 [ 188.637587] RCU used illegally from extended quiescent state! [ 188.690684] 3 locks held by swapper/7/0: [ 188.721932] #0: (&x->wait#11){......}, at: [<0000000000495de8>] complete+0x8/0x60 [ 188.797994] #1: (&p->pi_lock){-.-.-.}, at: [<000000000048510c>] try_to_wake_up+0xc/0x400 [ 188.881343] #2: (rcu_read_lock){......}, at: [<000000000048a910>] select_task_rq_fair+0x90/0xb40 [ 188.973043]stack backtrace: [ 188.993879] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 3.18.0-rc3-00068-g20f3963d-dirty #54 [ 189.076187] Call Trace: [ 189.089719] [0000000000499360] lockdep_rcu_suspicious+0xe0/0x100 [ 189.147035] [000000000048a99c] select_task_rq_fair+0x11c/0xb40 [ 189.202253] [00000000004852d8] try_to_wake_up+0x1d8/0x400 [ 189.252258] [000000000048554c] default_wake_function+0xc/0x20 [ 189.306435] [0000000000495554] __wake_up_common+0x34/0x80 [ 189.356448] [00000000004955b4] __wake_up_locked+0x14/0x40 [ 189.406456] [0000000000495e08] complete+0x28/0x60 [ 189.448142] [0000000000636e28] blk_end_sync_rq+0x8/0x20 [ 189.496057] [0000000000639898] __blk_mq_end_request+0x18/0x60 [ 189.550249] [00000000006ee014] scsi_end_request+0x94/0x180 [ 189.601286] [00000000006ee334] scsi_io_completion+0x1d4/0x600 [ 189.655463] [00000000006e51c4] scsi_finish_command+0xc4/0xe0 [ 189.708598] [00000000006ed958] scsi_softirq_done+0x118/0x140 [ 189.761735] [00000000006398ec] __blk_mq_complete_request_remote+0xc/0x20 [ 189.827383] [00000000004c75d0] generic_smp_call_function_single_interrupt+0x150/0x1c0 [ 189.906581] [000000000043e514] smp_call_function_single_client+0x14/0x40 ==================== Based almost entirely upon a patch by Paul E. McKenney. Reported-by:
Meelis Roos <mroos@linux.ee> Tested-by:
-
David S. Miller authored
[ Upstream commit 7da89a2a ] Meelis Roos reports crashes during bootup on a V480 that look like this: ==================== [ 61.300577] PCI: Scanning PBM /pci@9,600000 [ 61.304867] schizo f009b070: PCI host bridge to bus 0003:00 [ 61.310385] pci_bus 0003:00: root bus resource [io 0x7ffe9000000-0x7ffe9ffffff] (bus address [0x0000-0xffffff]) [ 61.320515] pci_bus 0003:00: root bus resource [mem 0x7fb00000000-0x7fbffffffff] (bus address [0x00000000-0xffffffff]) [ 61.331173] pci_bus 0003:00: root bus resource [bus 00] [ 61.385344] Unable to handle kernel NULL pointer dereference [ 61.390970] tsk->{mm,active_mm}->context = 0000000000000000 [ 61.396515] tsk->{mm,active_mm}->pgd = fff000b000002000 [ 61.401716] \|/ ____ \|/ [ 61.401716] "@'/ .. \`@" [ 61.401716] /_| \__/ |_\ [ 61.401716] \__U_/ [ 61.416362] swapper/0(0): Oops [#1] [ 61.419837] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0-rc1-00422-g2cc91884-dirty #24 [ 61.427975] task: fff000b0fd8e9c40 ti: fff000b0fd928000 task.ti: fff000b0fd928000 [ 61.435426] TSTATE: 0000004480e01602 TPC: 00000000004455e4 TNPC: 00000000004455e8 Y: 00000000 Not tainted [ 61.445230] TPC: <schizo_pcierr_intr+0x104/0x560> [ 61.449897] g0: 0000000000000000 g1: 0000000000000000 g2: 0000000000a10f78 g3: 000000000000000a [ 61.458563] g4: fff000b0fd8e9c40 g5: fff000b0fdd82000 g6: fff000b0fd928000 g7: 000000000000000a [ 61.467229] o0: 000000000000003d o1: 0000000000000000 o2: 0000000000000006 o3: fff000b0ffa5fc7e [ 61.475894] o4: 0000000000060000 o5: c000000000000000 sp: fff000b0ffa5f3c1 ret_pc: 00000000004455cc [ 61.484909] RPC: <schizo_pcierr_intr+0xec/0x560> [ 61.489500] l0: fff000b0fd8e9c40 l1: 0000000000a20800 l2: 0000000000000000 l3: 000000000119a430 [ 61.498164] l4: 0000000001742400 l5: 00000000011cfbe0 l6: 00000000011319c0 l7: fff000b0fd8ea348 [ 61.506830] i0: 0000000000000000 i1: fff000b0fdb34000 i2: 0000000320000000 i3: 0000000000000000 [ 61.515497] i4: 00060002010b003f i5: 0000040004e02000 i6: fff000b0ffa5f481 i7: 00000000004a9920 [ 61.524175] I7: <handle_irq_event_percpu+0x40/0x140> [ 61.529099] Call Trace: [ 61.531531] [00000000004a9920] handle_irq_event_percpu+0x40/0x140 [ 61.537681] [00000000004a9a58] handle_irq_event+0x38/0x80 [ 61.543145] [00000000004ac77c] handle_fasteoi_irq+0xbc/0x200 [ 61.548860] [00000000004a9084] generic_handle_irq+0x24/0x40 [ 61.554500] [000000000042be0c] handler_irq+0xac/0x100 ==================== The problem is that pbm->pci_bus->self is NULL. This code is trying to go through the standard PCI config space interfaces to read the PCI controller's PCI_STATUS register. This doesn't work, because we more often than not do not enumerate the PCI controller as a bonafide PCI device during the OF device node scan. Therefore bus->self remains NULL. Existing common code for PSYCHO and PSYCHO-like PCI controllers handles this properly, by doing the config space access directly. Do the same here, pbm->pci_ops->{read,write}(). Reported-by:
-
Dwight Engen authored
[ Upstream commit 85b0c6e6 ] The VD_OP_GET_VTOC operation will succeed only if the vdisk backend has a VTOC label, otherwise it will fail. In particular, it will return error 48 (ENOTSUP) if the disk has an EFI label. VTOC disk labels are already handled by directly reading the disk in block/partitions/sun.c (enabled by CONFIG_SUN_PARTITION which defaults to y on SPARC). Since port->label is unused in the driver, remove the call and the field. Signed-off-by:
Dwight Engen <dwight.engen@oracle.com> Signed-off-by:
-
Dwight Engen authored
[ Upstream commit d0aedcd4 ] vio_dring_avail() will allow use of every dring entry, but when the last entry is allocated then dr->prod == dr->cons which is indistinguishable from the ring empty condition. This causes the next allocation to reuse an entry. When this happens in sunvdc, the server side vds driver begins nack'ing the messages and ends up resetting the ldc channel. This problem does not effect sunvnet since it checks for < 2. The fix here is to just never allocate the very last dring slot so that full and empty are not the same condition. The request start path was changed to check for the ring being full a bit earlier, and to stop the blk_queue if there is no space left. The blk_queue will be restarted once the ring is only half full again. The number of ring entries was increased to 512 which matches the sunvnet and Solaris vdc drivers, and greatly reduces the frequency of hitting the ring full condition and the associated blk_queue stop/starting. The checks in sunvent were adjusted to account for vio_dring_avail() returning 1 less. Orabug: 19441666 OraBZ: 14983 Signed-off-by:
-
Dwight Engen authored
[ Upstream commit 5eed69ff ] ldc_map_sg() could fail its check that the number of pages referred to by the sg scatterlist was <= the number of cookies. This fixes the issue by doing a similar thing to the xen-blkfront driver, ensuring that the scatterlist will only ever contain a segment count <= port->ring_cookies, and each segment will be page aligned, and <= page size. This ensures that the scatterlist is always mappable. Orabug: 19347817 OraBZ: 15945 Signed-off-by:
-
Allen Pais authored
[ Upstream commit de5b73f0 ] The LDom diskserver doesn't return reliable geometry data. In addition, the types for all fields in the vio_disk_geom are u16, which were being truncated in the cast into the u8's of the Linux struct hd_geometry. Modify vdc_getgeo() to compute the geometry from the disk's capacity in a manner consistent with xen-blkfront::blkif_getgeo(). Signed-off-by:
-
Allen Pais authored
[ Upstream commit 9bce2182 ] Interpret the media type from v1.1 protocol to support CDROM/DVD. For v1.0 protocol, a disk's size continues to be calculated from the geometry returned by the vdisk server. The geometry returned by the server can be less than the actual number of sectors available in the backing image/device due to the rounding in the division used to compute the geometry in the vdisk server. In v1.1 protocol a disk's actual size in sectors is returned during the handshake. Use this size when v1.1 protocol is negotiated. Since this size will always be larger than the former geometry computed size, disks created under v1.0 will be forwards compatible to v1.1, but not vice versa. Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 4184b2a7 ] A very minimal and simple user space application allocating an SCTP socket, setting SCTP_AUTH_KEY setsockopt(2) on it and then closing the socket again will leak the memory containing the authentication key from user space: unreferenced object 0xffff8800837047c0 (size 16): comm "a.out", pid 2789, jiffies 4296954322 (age 192.258s) hex dump (first 16 bytes): 01 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff816d7e8e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811c88d8>] __kmalloc+0xe8/0x270 [<ffffffffa0870c23>] sctp_auth_create_key+0x23/0x50 [sctp] [<ffffffffa08718b1>] sctp_auth_set_key+0xa1/0x140 [sctp] [<ffffffffa086b383>] sctp_setsockopt+0xd03/0x1180 [sctp] [<ffffffff815bfd94>] sock_common_setsockopt+0x14/0x20 [<ffffffff815beb61>] SyS_setsockopt+0x71/0xd0 [<ffffffff816e58a9>] system_call_fastpath+0x12/0x17 [<ffffffffffffffff>] 0xffffffffffffffff This is bad because of two things, we can bring down a machine from user space when auth_enable=1, but also we would leave security sensitive keying material in memory without clearing it after use. The issue is that sctp_auth_create_key() already sets the refcount to 1, but after allocation sctp_auth_set_key() does an additional refcount on it, and thus leaving it around when we free the socket. Fixes: 65b07e5d ("[SCTP]: API updates to suport SCTP-AUTH extensions.") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit e40607cb ] An SCTP server doing ASCONF will panic on malformed INIT ping-of-death in the form of: ------------ INIT[PARAM: SET_PRIMARY_IP] ------------> While the INIT chunk parameter verification dissects through many things in order to detect malformed input, it misses to actually check parameters inside of parameters. E.g. RFC5061, section 4.2.4 proposes a 'set primary IP address' parameter in ASCONF, which has as a subparameter an address parameter. So an attacker may send a parameter type other than SCTP_PARAM_IPV4_ADDRESS or SCTP_PARAM_IPV6_ADDRESS, param_type2af() will subsequently return 0 and thus sctp_get_af_specific() returns NULL, too, which we then happily dereference unconditionally through af->from_addr_param(). The trace for the log: BUG: unable to handle kernel NULL pointer dereference at 0000000000000078 IP: [<ffffffffa01e9c62>] sctp_process_init+0x492/0x990 [sctp] PGD 0 Oops: 0000 [#1] SMP [...] Pid: 0, comm: swapper Not tainted 2.6.32-504.el6.x86_64 #1 Bochs Bochs RIP: 0010:[<ffffffffa01e9c62>] [<ffffffffa01e9c62>] sctp_process_init+0x492/0x990 [sctp] [...] Call Trace: <IRQ> [<ffffffffa01f2add>] ? sctp_bind_addr_copy+0x5d/0xe0 [sctp] [<ffffffffa01e1fcb>] sctp_sf_do_5_1B_init+0x21b/0x340 [sctp] [<ffffffffa01e3751>] sctp_do_sm+0x71/0x1210 [sctp] [<ffffffffa01e5c09>] ? sctp_endpoint_lookup_assoc+0xc9/0xf0 [sctp] [<ffffffffa01e61f6>] sctp_endpoint_bh_rcv+0x116/0x230 [sctp] [<ffffffffa01ee986>] sctp_inq_push+0x56/0x80 [sctp] [<ffffffffa01fcc42>] sctp_rcv+0x982/0xa10 [sctp] [<ffffffffa01d5123>] ? ipt_local_in_hook+0x23/0x28 [iptable_filter] [<ffffffff8148bdc9>] ? nf_iterate+0x69/0xb0 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8148bf86>] ? nf_hook_slow+0x76/0x120 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0 [...] A minimal way to address this is to check for NULL as we do on all other such occasions where we know sctp_get_af_specific() could possibly return with NULL. Fixes: d6de3097 ("[SCTP]: Add the handling of "Set Primary IP Address" parameter to INIT") Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit f03eb128 ] Otherwise it gets overwritten by register_netdev(). Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit 6c6151da ] ip6_tnl_dev_init() sets the dev->iflink via a call to ip6_tnl_link_config(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for ipv6 tunnels. Fix this by using ip6_tnl_dev_init() as the ndo_init function. Then ip6_tnl_dev_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by:
-
- 14 Nov, 2014 17 commits
-
-
Greg Kroah-Hartman authored
-
Ilya Dryomov authored
commit f9865f06 upstream. Commit f363e45f ("net/ceph: make ceph_msgr_wq non-reentrant") effectively removed WQ_MEM_RECLAIM flag from ceph_msgr_wq. This is wrong - libceph is very much a memory reclaim path, so restore it. Signed-off-by:
Micha Krause <micha@krausam.de> Reviewed-by:
-
Chris Mason authored
commit 6e5aafb2 upstream. If we hit any errors in btrfs_lookup_csums_range, we'll loop through all the csums we allocate and free them. But the code was using list_entry incorrectly, and ended up trying to free the on-stack list_head instead. This bug came from commit 0678b618 btrfs: Don't BUG_ON kzalloc error in btrfs_lookup_csums_range() Signed-off-by:
Chris Mason <clm@fb.com> Reported-by:
Erik Berg <btrfs@slipsprogrammoer.no> Signed-off-by:
-
Grant Likely authored
commit a87fa1d8 upstream. The string property read helpers will run off the end of the buffer if it is handed a malformed string property. Rework the parsers to make sure that doesn't happen. At the same time add new test cases to make sure the functions behave themselves. The original implementations of of_property_read_string_index() and of_property_count_strings() both open-coded the same block of parsing code, each with it's own subtly different bugs. The fix here merges functions into a single helper and makes the original functions static inline wrappers around the helper. One non-bugfix aspect of this patch is the addition of a new wrapper, of_property_read_string_array(). The new wrapper is needed by the device_properties feature that Rafael is working on and planning to merge for v3.19. The implementation is identical both with and without the new static inline wrapper, so it just got left in to reduce the churn on the header file. Signed-off-by:
Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Darren Hart <darren.hart@intel.com> Signed-off-by:
-
Yijing Wang authored
commit e4a60d13 upstream. There is a race condition when removing glue directory. It can be reproduced in following test: path 1: Add first child device device_add() get_device_parent() /*find parent from glue_dirs.list*/ list_for_each_entry(k, &dev->class->p->glue_dirs.list, entry) if (k->parent == parent_kobj) { kobj = kobject_get(k); break; } .... class_dir_create_and_add() path2: Remove last child device under glue dir device_del() cleanup_device_parent() cleanup_glue_dir() kobject_put(glue_dir); If path2 has been called cleanup_glue_dir(), but not call kobject_put(glue_dir), the glue dir is still in parent's kset list. Meanwhile, path1 find the glue dir from the glue_dirs.list. Path2 may release glue dir before path1 call kobject_get(). So kernel will report the warning and bug_on. This is a "classic" problem we have of a kref in a list that can be found while the last instance could be removed at the same time. This patch reuse gdp_mutex to fix this race condition. The following calltrace is captured in kernel 3.4, but the latest kernel still has this bug. ----------------------------------------------------- <4>[ 3965.441471] WARNING: at ...include/linux/kref.h:41 kobject_get+0x33/0x40() <4>[ 3965.441474] Hardware name: Romley <4>[ 3965.441475] Modules linked in: isd_iop(O) isd_xda(O)... ... <4>[ 3965.441605] Call Trace: <4>[ 3965.441611] [<ffffffff8103717a>] warn_slowpath_common+0x7a/0xb0 <4>[ 3965.441615] [<ffffffff810371c5>] warn_slowpath_null+0x15/0x20 <4>[ 3965.441618] [<ffffffff81215963>] kobject_get+0x33/0x40 <4>[ 3965.441624] [<ffffffff812d1e45>] get_device_parent.isra.11+0x135/0x1f0 <4>[ 3965.441627] [<ffffffff812d22d4>] device_add+0xd4/0x6d0 <4>[ 3965.441631] [<ffffffff812d0dbc>] ? dev_set_name+0x3c/0x40 .... <2>[ 3965.441912] kernel BUG at ..../fs/sysfs/group.c:65! <4>[ 3965.441915] invalid opcode: 0000 [#1] SMP ... <4>[ 3965.686743] [<ffffffff811a677e>] sysfs_create_group+0xe/0x10 <4>[ 3965.686748] [<ffffffff810cfb04>] blk_trace_init_sysfs+0x14/0x20 <4>[ 3965.686753] [<ffffffff811fcabb>] blk_register_queue+0x3b/0x120 <4>[ 3965.686756] [<ffffffff812030bc>] add_disk+0x1cc/0x490 .... ------------------------------------------------------- Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Signed-off-by:
Weng Meiling <wengmeiling.weng@huawei.com> Signed-off-by:
-
Wolfram Sang authored
commit 11cfbfb0 upstream. iowait is for blkio [1]. I2C shouldn't use it. [1] https://lkml.org/lkml/2014/11/3/317Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
-
Hans de Goede authored
commit 183fd8fc upstream. The acpi-video backlight interface on the Acer KAV80 is broken, and worse it causes the entire machine to slow down significantly after a suspend/resume. Blacklist it, and use the acer-wmi backlight interface instead. Note that the KAV80 is somewhat unique in that it is the only Acer model where we fall back to acer-wmi after blacklisting, rather then using the native (e.g. intel) backlight driver. This is done because there is no native backlight interface on this model. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1128309Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Jan Kara authored
commit a8d42056 upstream. When we fail to allocate page vector in rbd_obj_read_sync() we just basically ignore the problem and continue which will result in an oops later. Fix the problem by returning proper error. CC: Yehuda Sadeh <yehuda@inktank.com> CC: Sage Weil <sage@inktank.com> CC: ceph-devel@vger.kernel.org Coverity-id: 1226882 Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Alex Deucher authored
commit 8c3e4347 upstream. 0x4c6e is a secondary device id so should not be used by the driver. Noticed-by:
Mark Kettenis <mark.kettenis@xs4all.nl> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit bfa6b18c ] Currently, there's no guarantee that udc->driver will be valid when using soft_connect sysfs interface. In fact, we can very easily trigger a NULL pointer dereference by trying to disconnect when a gadget driver isn't loaded. Fix this bug: ~# echo disconnect > soft_connect [ 33.685743] Unable to handle kernel NULL pointer dereference at virtual address 00000014 [ 33.694221] pgd = ed0cc000 [ 33.697174] [00000014] *pgd=ae351831, *pte=00000000, *ppte=00000000 [ 33.703766] Internal error: Oops: 17 [#1] SMP ARM [ 33.708697] Modules linked in: xhci_plat_hcd xhci_hcd snd_soc_davinci_mcasp snd_soc_tlv320aic3x snd_soc_edma snd_soc_omap snd_soc_evm snd_soc_core dwc3 snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd lis3lv02d_i2c matrix_keypad lis3lv02d dwc3_omap input_polldev soundcore [ 33.734372] CPU: 0 PID: 1457 Comm: bash Not tainted 3.17.0-09740-ga93416e-dirty #345 [ 33.742457] task: ee71ce00 ti: ee68a000 task.ti: ee68a000 [ 33.748116] PC is at usb_udc_softconn_store+0xa4/0xec [ 33.753416] LR is at mark_held_locks+0x78/0x90 [ 33.758057] pc : [<c04df128>] lr : [<c00896a4>] psr: 20000013 [ 33.758057] sp : ee68bec8 ip : c0c00008 fp : ee68bee4 [ 33.770050] r10: ee6b394c r9 : ee68bf80 r8 : ee6062c0 [ 33.775508] r7 : 00000000 r6 : ee6062c0 r5 : 0000000b r4 : ee739408 [ 33.782346] r3 : 00000000 r2 : 00000000 r1 : ee71d390 r0 : ee664170 [ 33.789168] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 33.796636] Control: 10c5387d Table: ad0cc059 DAC: 00000015 [ 33.802638] Process bash (pid: 1457, stack limit = 0xee68a248) [ 33.808740] Stack: (0xee68bec8 to 0xee68c000) [ 33.813299] bec0: 0000000b c0411284 ee6062c0 00000000 ee68bef4 ee68bee8 [ 33.821862] bee0: c04112ac c04df090 ee68bf14 ee68bef8 c01c2868 c0411290 0000000b ee6b3940 [ 33.830419] bf00: 00000000 00000000 ee68bf4c ee68bf18 c01c1a24 c01c2818 00000000 00000000 [ 33.838990] bf20: ee61b940 ee2f47c0 0000000b 000ce408 ee68bf80 c000f304 ee68a000 00000000 [ 33.847544] bf40: ee68bf7c ee68bf50 c0152dd8 c01c1960 ee68bf7c c0170af8 ee68bf7c ee2f47c0 [ 33.856099] bf60: ee2f47c0 000ce408 0000000b c000f304 ee68bfa4 ee68bf80 c0153330 c0152d34 [ 33.864653] bf80: 00000000 00000000 0000000b 000ce408 b6e7fb50 00000004 00000000 ee68bfa8 [ 33.873204] bfa0: c000f080 c01532e8 0000000b 000ce408 00000001 000ce408 0000000b 00000000 [ 33.881763] bfc0: 0000000b 000ce408 b6e7fb50 00000004 0000000b 00000000 000c5758 00000000 [ 33.890319] bfe0: 00000000 bec2c924 b6de422d b6e1d226 40000030 00000001 75716d2f 00657565 [ 33.898890] [<c04df128>] (usb_udc_softconn_store) from [<c04112ac>] (dev_attr_store+0x28/0x34) [ 33.907920] [<c04112ac>] (dev_attr_store) from [<c01c2868>] (sysfs_kf_write+0x5c/0x60) [ 33.916200] [<c01c2868>] (sysfs_kf_write) from [<c01c1a24>] (kernfs_fop_write+0xd0/0x194) [ 33.924773] [<c01c1a24>] (kernfs_fop_write) from [<c0152dd8>] (vfs_write+0xb0/0x1bc) [ 33.932874] [<c0152dd8>] (vfs_write) from [<c0153330>] (SyS_write+0x54/0xb0) [ 33.940247] [<c0153330>] (SyS_write) from [<c000f080>] (ret_fast_syscall+0x0/0x48) [ 33.948160] Code: e1a01007 e12fff33 e5140004 e5143008 (e5933014) [ 33.954625] ---[ end trace f849bead94eab7ea ]--- Fixes: 2ccea03a (usb: gadget: introduce UDC Class) Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 52ec49a5 ] During Halt Endpoint Test, our interrupt endpoint will be disabled, which will clear out ep->desc to NULL. Unless we call config_ep_by_speed() again, we will not be able to enable this endpoint which will make us fail that test. Fixes: f9c56cdd (usb: gadget: Clear usb_endpoint_descriptor inside the struct usb_ep on disable) Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 7a608559 ] According to our Gadget Framework API documentation, ->set_halt() *must* return -EAGAIN if we have pending transfers (on either direction) or FIFO isn't empty (on TX endpoints). Fix this bug so that the mass storage gadget can be used without stall=0 parameter. This patch should be backported to all kernels since v3.2. Suggested-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Ondrej Kozina authored
commit e2cffb5f upstream. On archs with PAGE_SIZE >= 64 KiB the function skcipher_alloc_sgl() fails with -ENOMEM no matter what user space actually requested. This is caused by the fact sock_kmalloc call inside the function tried to allocate more memory than allowed by the default kernel socket buffer size (kernel param net.core.optmem_max). Signed-off-by:
Ondrej Kozina <okozina@redhat.com> Signed-off-by:
-
Jan Kara authored
commit f55fefd1 upstream. The WARN_ON checking whether i_mutex is held in pagecache_isize_extended() was wrong because some filesystems (e.g. XFS) use different locks for serialization of truncates / writes. So just remove the check. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Andy Lutomirski authored
commit b47dcbdc upstream. If the TSC is unusable or disabled, then this patch fixes: - Confusion while trying to clear old APIC interrupts. - Division by zero and incorrect programming of the TSC deadline timer. This fixes boot if the CPU has a TSC deadline timer but a missing or broken TSC. The failure to boot can be observed with qemu using -cpu qemu64,-tsc,+tsc-deadline This also happens to me in nested KVM for unknown reasons. With this patch, I can boot cleanly (although without a TSC). Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Mathias Krause authored
commit 6891c450 upstream. If userland creates a timer without specifying a sigevent info, we'll create one ourself, using a stack local variable. Particularly will we use the timer ID as sival_int. But as sigev_value is a union containing a pointer and an int, that assignment will only partially initialize sigev_value on systems where the size of a pointer is bigger than the size of an int. On such systems we'll copy the uninitialized stack bytes from the timer_create() call to userland when the timer actually fires and we're going to deliver the signal. Initialize sigev_value with 0 to plug the stack info leak. Found in the PaX patch, written by the PaX Team. Fixes: 5a9fa730 ("posix-timers: kill ->it_sigev_signo and...") Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Brad Spengler <spender@grsecurity.net> Cc: PaX Team <pageexec@freemail.hu> Link: http://lkml.kernel.org/r/1412456799-32339-1-git-send-email-minipli@googlemail.comSigned-off-by:
-
Karl Beldan authored
commit c7abf25a upstream. It affects non-(V)HT rates and can lead to selecting an rts_cts rate that is not a basic rate or way superior to the reference rate (ATM rates[0] used for the 1st attempt of the protected frame data). E.g, assuming drivers register growing (bitrate) sorted tables of ieee80211_rate-s, having : - rates[0].idx == d'2 and basic_rates == b'10100 will select rts_cts idx b'10011 & ~d'(BIT(2)-1), i.e. 1, likewise - rates[0].idx == d'2 and basic_rates == b'10001 will select rts_cts idx b'10000 The first is not a basic rate and the second is > rates[0]. Also, wrt severity of the addressed misbehavior, ATM we only have one rts_cts_rate_idx rather than one per rate table entry, so this idx might still point to bitrates > rates[1..MAX_RATES]. Fixes: 5253ffb8 ("mac80211: always pick a basic rate to tx RTS/CTS for pre-HT rates") Signed-off-by:
Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by:
-
