- 08 Aug, 2024 3 commits
-
-
Jani Nikula authored
i915_report_error() presently acts as a wrapper for __i915_printk(). In practice, it would be better to use drm level error reporting wherever possible, so replace all uses of i915_report_error() with the equivalent drm_err() call. These cases are not worth having a dedicated wrapper to also print bug reporting info. Replacing the calls leaves i915_report_error() with no users, so remove it. Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by:
Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/19eab020c57c0fa45acacf4e4a8077e57cd4d561.1722951405.git.jani.nikula@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Jani Nikula authored
__i915_printk() does nothing special for notice/info levels. Just use the regular drm_notice() and drm_info() calls. Reviewed-by:
-
Andi Shyti authored
Do not use double blanks, ", " in function parameters where it's not required by any alignment purpose. Replase it with a single blank, ", ". Signed-off-by:
-
- 06 Aug, 2024 7 commits
-
-
Imre Deak authored
The Display Engine's DSC register values are deducted from the DSC configuration stored in intel_crtc_state::dsc. The latter one is dumped in a human-readable format, so dumping the register values is redundant, remove it. Acked-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240805150802.3568970-8-imre.deak@intel.com
-
Imre Deak authored
Dump the DSC state to dmesg during HW readout and state computation as well as the i915_display_info debugfs entry. v2: Rebase on the s/DRM_X16/FXP_Q4 change. Acked-by:
-
Imre Deak authored
Replace the BPP_X16_FMT()/ARGS() helpers defined by the driver with the equivalent FXP_Q4_FMT()/ARGS() helpers defined by DRM core. v2: Rebase on the s/DRM_X16/FXP_Q4 change. Acked-by:
-
Imre Deak authored
Replace the to_bpp_frac() helper defined by the driver with the equivalent fxp_q4_to_frac() helper defined by DRM core. v2: Rebase on the s/drm_x16/fxp_q4 change. Acked-by:
-
Imre Deak authored
Replace the to_bpp_int_roundup() helper defined by the driver with the equivalent fxp_q4_to_int_roundup() helper defined by DRM core. v2: Rebase on s/drm_x16/fxp_q4 change. Acked-by:
-
Imre Deak authored
Replace the to_bpp_int() helper defined by the driver with the equivalent fxp_q4_to_int() helper defined by DRM core. v2: Rebase on the s/drm_x16/fxp_q4 change. Acked-by:
-
Imre Deak authored
Replace the to_bpp_x16() helper defined by the driver with the equivalent fxp_q4_from_int() helper defined by DRM core. v2: Rebase on the s/drm_x16/fxp_q4 change. Acked-by:
-
- 05 Aug, 2024 1 commit
-
-
Dnyaneshwar Bhadane authored
On the PCH side the second PPS was introduced in ICP+.Add condition On MTL_PCH and greater platform also having the second PPS. Note that DG1/2 south block only has the single PPS, so need to exclude the fake DG1/2 PCHs Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11488 Fixes: 93cbc1ac ("drm/i915/mtl: Add fake PCH for Meteor Lake") Cc: <stable@vger.kernel.org> # v6.9+ Signed-off-by:
Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Reviewed-by:
-
- 01 Aug, 2024 4 commits
-
-
Thomas Zimmermann authored
Replace FB_BLANK_ constants with their counterparts from the backlight subsystem. The values are identical, so there's no change in functionality or semantics. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tursulin@ursulin.net> Reviewed-by:
-
Jani Nikula authored
Sync with v6.11-rc1 in general, and specifically get the new BACKLIGHT_POWER_ constants for power states. Signed-off-by: -
Jani Nikula authored
The last users have been removed years ago. Finish the job. Reviewed-by:
Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240731110744.1572240-1-jani.nikula@intel.comSigned-off-by:
-
Suraj Kandpal authored
DPKGC can now be enabled with VRR enabled if Vmin = Vmax = Flipline is met. Bspec: 68986 Signed-off-by:
Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by:
Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240711044905.3306882-1-suraj.kandpal@intel.com
-
- 31 Jul, 2024 15 commits
-
-
Imre Deak authored
Enable switching between UHBR and non-UHBR link rates on MST links when reducing the link parameters after an LT failure. Reviewed-by:
-
Imre Deak authored
As explained in the previous patch, the MST link BW reported by branch devices during topology probing/path resources enumeration depends on the link parameters programmed to DPCD to be up-to-date. After a sink is plugged this is not ensured, as those DPCD values start out zeroed. The target link parameters (for a subsequent modeset) are the maximum that is supported, so make sure these maximum values are programmed before the topology probing. Reviewed-by:
-
Imre Deak authored
The MST link BW reported by branch devices via the ENUM_PATH_RESOURCES message depends on the channel coding and link rate/lane count parameters programmed to DPCD. This is the case at least for some branch devices, while for others the reported BW is independent of the link parameters. In any case the DP standard requires the branch device to adjust the returned value to both account for the different way the BW for FEC is accounted for (included in the returned value for non-UHBR and not included for UHBR rates) and to limit the returned value to the (trained) link BW between the source and first downstream branch device, see DP v2.0/v2.1 Figure 2-94, DP v2.1 5.9.7. Presumedly this is also the reason why the standard requires the DPCD link rate/lane count values being up-to-date before sending the ENUM_PATH_RESOURCES message, see DP v2.1 2.14.9.4. Based on the above reprobe the MST topology after the link is retrained with new link parameters to make sure that the MST link BW tracked in the MST topology state (via each topology port's full_pbn value) is up-to-date. The next patch will make sure that the MST link BW is also kept up-to-date if the link is disabled. Reviewed-by:
-
Imre Deak authored
If the MST payload allocation failed, enabling the output also failed most probably, so send a uevent accordinly requesting the user to retry the modeset. While at it remove the driver specific debug message, there is already one printed by drm_dp_add_payload_part1(). Reviewed-by:
-
Imre Deak authored
The MST topology probing depends on the maximum link parameters - programmed to DPCD if required by a follow-up patch - so make sure these parameters are up-to-date before configuring and probing the MST topology. Reviewed-by:
-
Imre Deak authored
On MST links - at least for some MST branch devices - the list of modes returned to users on an enabled link depends on the current link rate/lane count parameters (besides the DPRX link capabilities, any MST branch BW limit and the maximum link parameters reduced after LT failures). In particular the MST branch BW limit may depend on the link rate/lane count parameters programmed to DPCD. After an LT failure and limiting the maximum link parameters accordingly, users should see a mode list reflecting these new limits. However with the current fallback order this isn't ensured, as the new limit could allow for modes requiring a higher link BW, but these modes will be filtered out due to the enabled link's lower link BW. Ensure that the mode list changes in a consistent way after a link training failure and reducing the link parameters by changing the fallback order on MST links to happen in BW order. v2: - s/INTEL_DP_MAX_SUPPORTED_LANE_COUNTS/INTEL_DP_MAX_SUPPORTED_LANE_CONFIGS and s/num_common_lane_counts/num_common_lane_configs to make the difference wrt. max lane counts clearer. (Suraj) - Add a TODO comment to make the SST fallback logic work the same way as MST. (Arun) - Use sort_r()'s default swap function instead of a custom one. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by:
Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by:
-
Imre Deak authored
Add helpers to set the link mode and BW parameters. These are required by a follow-up patch setting the parameters for a disabled link. Reviewed-by:
-
Imre Deak authored
A follow-up patch will add an alternative way to reduce the link parameters in BW order on MST links, prepare for that here. Reviewed-by:
-
Imre Deak authored
There are multiple failure cases a modeset-retry uevent can be sent for a link (TBT tunnel BW allocation failure, unrecoverable link training failure), a follow-up patch adding the handling for a new case where the DP MST payload allocation fails. The uevent is the same in all cases, sent to all the connectors on the link, so in case of multiple failures there is no point in sending a separate uevent for each failure; prevent this, sending only a single modeset-retry uevent for a commit. Reviewed-by:
-
Imre Deak authored
Initialize the DP link parameters during HW readout. These need to be up-to-date at least for the MST topology probing, which depends on the link rate and lane count programmed in DPCD. A follow-up patch will program the DPCD values to reflect the maximum link parameters before the first MST topology probing, but should do so only if the link is disabled (link_trained==false). Reviewed-by:
-
Imre Deak authored
If the DDI encoder output is enabled in HDMI mode there is no point in calling intel_dp_sync_state(), as in that case the DPCD initialization will fail - as expected - with AUX timeouts. Prevent calling the hook in this case. Reviewed-by:
-
Imre Deak authored
In the if (old_ddps != port->ddps || !created) if (port->ddps && !port->input) ret = drm_dp_send_enum_path_resources(); sequence the first if's condition is true if the port exists already (!created) or the port was created anew (hence old_ddps==0) and it was in the plugged state (port->ddps==1). The second if's condition is true for output ports in the plugged state. So the function is called for an output port in the plugged state, regardless if it already existed or not and regardless of the old plugged state. In all other cases port->full_pbn can be zeroed as the port is either an input for which full_pbn is never set, or an output in the unplugged state for which full_pbn was already zeroed previously or the port was just created (with port->full_pbn==0). Simplify the condition, making it clear that the path resources are always enumerated for an output port in the plugged state. Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Imre Deak authored
A follow up i915 patch will need to reprobe the MST topology after the initial probing, add a helper for this. Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
Imre Deak authored
Factor out a function to queue a work for probing the topology, also used by the next patch. Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
Jani Nikula authored
The comments do not add any value. Remove. Reviewed-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240729173320.1053791-1-jani.nikula@intel.comSigned-off-by:
-
- 30 Jul, 2024 3 commits
-
-
Nikita Zhandarovich authored
On the off chance that clock value ends up being too high (by means of skl_ddi_calculate_wrpll() having been called with big enough value of crtc_state->port_clock * 1000), one possible consequence may be that the result will not be able to fit into signed int. Fix this issue by moving conversion of clock parameter from kHz to Hz into the body of skl_ddi_calculate_wrpll(), as well as casting the same parameter to u64 type while calculating the value for AFE clock. This both mitigates the overflow problem and avoids possible erroneous integer promotion mishaps. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 82d35437 ("drm/i915/skl: Implementation of SKL DPLL programming") Cc: stable@vger.kernel.org Signed-off-by:
Nikita Zhandarovich <n.zhandarovich@fintech.ru> Reviewed-by:
-
Suraj Kandpal authored
Fix HDCP2_STREAM_STATUS macro, it called pipe instead of port never threw a compile error as no one used it. --v2 -Add Fixes [Jani] Fixes: d631b984 ("drm/i915/hdcp: Add HDCP 2.2 stream register") Signed-off-by:
-
Mitul Golani authored
AS SDP should be computed when VRR timing generator is also enabled. Correct the compute condition to compute params of Adaptive sync SDP when VRR timing genrator is enabled along with sink support indication. --v2: Modify if condition (Jani). Fixes: b2013783 ("drm/i915/display: Cache adpative sync caps to use it later") Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Cc: Arun R Murthy <arun.r.murthy@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: intel-xe@lists.freedesktop.org Signed-off-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
-
- 29 Jul, 2024 1 commit
-
-
Lucas De Marchi authored
Being part o the display, ideally the setup and cleanup would be done by display itself. However this is a bigger refactor that needs to be done on both i915 and xe. For now, just fix the leak: unreferenced object 0xffff8881a0300008 (size 192): comm "modprobe", pid 4354, jiffies 4295647021 hex dump (first 32 bytes): 00 00 87 27 81 88 ff ff 18 80 9b 00 00 c9 ff ff ...'............ 18 81 9b 00 00 c9 ff ff 00 00 00 00 00 00 00 00 ................ backtrace (crc 99260e31): [<ffffffff823ce65b>] kmemleak_alloc+0x4b/0x80 [<ffffffff81493be2>] kmalloc_trace_noprof+0x312/0x3d0 [<ffffffffa1345679>] intel_opregion_setup+0x89/0x700 [xe] [<ffffffffa125bfaf>] xe_display_init_noirq+0x2f/0x90 [xe] [<ffffffffa1199ec3>] xe_device_probe+0x7a3/0xbf0 [xe] [<ffffffffa11f3713>] xe_pci_probe+0x333/0x5b0 [xe] [<ffffffff81af6be8>] local_pci_probe+0x48/0xb0 [<ffffffff81af8778>] pci_device_probe+0xc8/0x280 [<ffffffff81d09048>] really_probe+0xf8/0x390 [<ffffffff81d0937a>] __driver_probe_device+0x8a/0x170 [<ffffffff81d09503>] driver_probe_device+0x23/0xb0 [<ffffffff81d097b7>] __driver_attach+0xc7/0x190 [<ffffffff81d0628d>] bus_for_each_dev+0x7d/0xd0 [<ffffffff81d0851e>] driver_attach+0x1e/0x30 [<ffffffff81d07ac7>] bus_add_driver+0x117/0x250 Fixes: 44e69495 ("drm/xe/display: Implement display support") Reviewed-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240724215309.644423-1-lucas.demarchi@intel.comSigned-off-by:
Lucas De Marchi <lucas.demarchi@intel.com>
-
- 28 Jul, 2024 6 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix RPM package build error caused by an incorrect locale setup - Mark modules.weakdep as ghost in RPM package - Fix the odd combination of -S and -c in stack protector scripts, which is an error with the latest Clang * tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: Fix '-S -c' in x86 stack protector scripts kbuild: rpm-pkg: ghost modules.weakdep file kbuild: rpm-pkg: Fix C locale setup
-
Linus Torvalds authored
This simplifies the min_t() and max_t() macros by no longer making them work in the context of a C constant expression. That means that you can no longer use them for static initializers or for array sizes in type definitions, but there were only a couple of such uses, and all of them were converted (famous last words) to use MIN_T/MAX_T instead. Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Commit 3a7e02c0 ("minmax: avoid overly complicated constant expressions in VM code") added the simpler MIN_T/MAX_T macros in order to avoid some excessive expansion from the rather complicated regular min/max macros. The complexity of those macros stems from two issues: (a) trying to use them in situations that require a C constant expression (in static initializers and for array sizes) (b) the type sanity checking and MIN_T/MAX_T avoids both of these issues. Now, in the whole (long) discussion about all this, it was pointed out that the whole type sanity checking is entirely unnecessary for min_t/max_t which get a fixed type that the comparison is done in. But that still leaves min_t/max_t unnecessarily complicated due to worries about the C constant expression case. However, it turns out that there really aren't very many cases that use min_t/max_t for this, and we can just force-convert those. This does exactly that. Which in turn will then allow for much simpler implementations of min_t()/max_t(). All the usual "macros in all upper case will evaluate the arguments multiple times" rules apply. We should do all the same things for the regular min/max() vs MIN/MAX() cases, but that has the added complexity of various drivers defining their own local versions of MIN/MAX, so that needs another level of fixes first. Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/ Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by:
-
Linus Torvalds authored
Merge tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI and UBIFS updates from Richard Weinberger: - Many fixes for power-cut issues by Zhihao Cheng - Another ubiblock error path fix - ubiblock section mismatch fix - Misc fixes all over the place * tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: Fix ubi_init() ubiblock_exit() section mismatch ubifs: add check for crypto_shash_tfm_digest ubifs: Fix inconsistent inode size when powercut happens during appendant writing ubi: block: fix null-pointer-dereference in ubiblock_create() ubifs: fix kernel-doc warnings ubifs: correct UBIFS_DFS_DIR_LEN macro definition and improve code clarity mtd: ubi: Restore missing cleanup on ubi_init() failure path ubifs: dbg_orphan_check: Fix missed key type checking ubifs: Fix unattached inode when powercut happens in creating ubifs: Fix space leak when powercut happens in linking tmpfile ubifs: Move ui->data initialization after initializing security ubifs: Fix adding orphan entry twice for the same inode ubifs: Remove insert_dead_orphan from replaying orphan process Revert "ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path" ubifs: Don't add xattr inode into orphan area ubifs: Fix unattached xattr inode if powercut happens after deleting mtd: ubi: avoid expensive do_div() on 32-bit machines mtd: ubi: make ubi_class constant ubi: eba: properly rollback inside self_check_eba
-
Nathan Chancellor authored
After a recent change in clang to stop consuming all instances of '-S' and '-c' [1], the stack protector scripts break due to the kernel's use of -Werror=unused-command-line-argument to catch cases where flags are not being properly consumed by the compiler driver: $ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument] This results in CONFIG_STACKPROTECTOR getting disabled because CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set. '-c' and '-S' both instruct the compiler to stop at different stages of the pipeline ('-S' after compiling, '-c' after assembling), so having them present together in the same command makes little sense. In this case, the test wants to stop before assembling because it is looking at the textual assembly output of the compiler for either '%fs' or '%gs', so remove '-c' from the list of arguments to resolve the error. All versions of GCC continue to work after this change, along with versions of clang that do or do not contain the change mentioned above. Cc: stable@vger.kernel.org Fixes: 4f7fd4d7 ("[PATCH] Add the -fstack-protector option to the CFLAGS") Fixes: 60a5317f ("x86: implement x86_32 stack protector") Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353cf5600e9c [1] Signed-off-by:Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
