Pull ARM SoC fixes from Arnd Bergmann:
 "Here are the first arm-soc bug fixes.  Most of these are OMAP related
  fixes for regressions or minor bugs.  Aside from that, there are a few
  defconfig changes for various platforms"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  iommu/exynos: Fix arm64 allmodconfig build
  ARM: defconfigs: use CONFIG_CPUFREQ_DT
  ARM: omap2plus_defconfig: Enable AHCI_PLATFORM driver
  ARM: dts: am437x-sk-evm.dts: fix LCD timings
  ARM: dts: dra7-evm: Update SMPS7 (VDD_CORE) max voltage to match DM
  ARM: dts: dra7-evm: Fix typo in SMPS6 (VDD_GPU) max voltage
  ARM: OMAP2+: AM43x: Add ID for ES1.2
  ARM: dts: am437x-sk: fix lcd enable pin mux data
  ARM: dts: Fix gpmc regression for omap 2430sdp smc91x
  Revert "ARM: shmobile: multiplatform: add Audo DMAC peri peri support on defconfig"
  ARM: dts: dra7: fix DSS PLL clock mux registers
  ARM: dts: DRA7: wdt: Fix compatible property for watchdog node
  ARM: OMAP2+: clock: remove unused function prototype

Pull arm64 fixes from Will Deacon:
 "Given that my availability next week is likely to be poor, here are
  three arm64 fixes to resolve some issues introduced by features merged
  last week.  I was going to wait until -rc1, but it doesn't make much
  sense to sit on fixes.

  Fix some fallout introduced during the merge window:

   - Build failure when PM_SLEEP is disabled but CPU_IDLE is enabled
   - Compiler warning from page table dumper w/ 48-bit VAs
   - Erroneous page table truncation in reported dump"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: dump: don't skip final region
  arm64: mm: dump: fix shift warning
  arm64: psci: Fix build breakage without PM_SLEEP

Pull Xtensa fixes from Chris Zankel:
 - fix nommu support
 - remove s6000 variant and s6105 platform
 - fix permissions for kmapped pages so that copy_to_user_page works with them
 - add power management menu to Kconfig to allow use of runtime PM
 - disable linker optimizations because of a linker bug
 - fix sparse error

* tag 'xtensa-next-20141215' of git://github.com/czankel/xtensa-linux:
  xtensa: disable link optimization
  xtensa/uaccess: fix sparse errors
  xtensa: fix kmap_prot definition
  xtensa: add power management menu to Kconfig
  xtensa: remove s6000 variant and s6105 platform
  xtensa: make PLATFORM_DEFAULT_MEM parameters configurable
  xtensa: nommu: clean up memory map dump
  xtensa: nommu: reserve memory below PLATFORM_DEFAULT_MEM_START
  xtensa: nommu: set up cache and atomctl in initialize_mmu
  xtensa: move vecbase SR initialization to _startup
  xtensa: nommu: fix uImage load address
  xtensa: nommu: fix load address definitions
  xtensa: nommu: fix Image.elf reset code and ld script
  xtensa: nommu: add MMU dependency to DEBUG_TLB_SANITY
  xtensa: nommu: don't build most of the cache flushing code
  xtensa: nommu: don't provide arch_get_unmapped_area
  xtensa: nommu: provide MAP_UNINITIALIZED definition
  xtensa: nommu: provide _PAGE_CHG_MASK definition
  xtensa: nommu: provide __invalidate_dcache_page_alias stub
  xtensa: nommu: move init_mmu stub to nommu_context.h

Pull arch/tile updates from Chris Metcalf:
 "Note that one of the changes converts my old cmetcalf@tilera.com email
  in MAINTAINERS to the cmetcalf@ezchip.com email that you see on this
  email"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: update MAINTAINERS email to EZchip
  tile: avoid undefined behavior with regs[TREG_TP] etc
  arch: tile: kernel: kgdb.c: Use memcpy() instead of pointer copy one by one
  tile: Use the more common pr_warn instead of pr_warning
  arch: tile: gxio: Export symbols for module using in 'mpipe.c'
  arch: tile: kernel: signal.c: Use __copy_from/to_user() instead of __get/put_user()

Pull additional xen update from David Vrabel:
 "Xen: additional features for 3.19-rc0

   - Linear p2m for x86 PV guests which simplifies the p2m code,
     improves performance and will allow for > 512 GB PV guests in the
     future.

  A last-minute, configuration specific issue was discovered with this
  change which is why it was not included in my previous pull request.
  This is now been fixed and tested"

* tag 'stable/for-linus-3.19-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: switch to post-init routines in xen mmu.c earlier
  Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single"
  xen: annotate xen_set_identity_and_remap_chunk() with __init
  xen: introduce helper functions to do safe read and write accesses
  xen: Speed up set_phys_to_machine() by using read-only mappings
  xen: switch to linear virtual mapped sparse p2m list
  xen: Hide get_phys_to_machine() to be able to tune common path
  x86: Introduce function to get pmd entry pointer
  xen: Delay invalidating extra memory
  xen: Delay m2p_override initialization
  xen: Delay remapping memory of pv-domain
  xen: use common page allocation function in p2m.c
  xen: Make functions static
  xen: fix some style issues in p2m.c

Merge tag 'linux-kselftest-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest update from Shuah Khan:
 "kselftest updates for 3.19-rc1:

   - kcmp test include file cleanup
   - kcmp change to build on all architectures
   - A light weight kselftest framework that provides a set of
     interfaces for tests to use to report results.  In addition,
     several tests are updated to use the framework.
   - A new runtime system size test that prints the amount of RAM that
     the currently running system is using"

* tag 'linux-kselftest-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftest: size: Add size test for Linux kernel
  selftests/kcmp: Always try to build the test
  selftests/kcmp: Don't include kernel headers
  kcmp: Move kcmp.h into uapi
  selftests/timers: change test to use ksft framework
  selftests/kcmp: change test to use ksft framework
  selftests/ipc: change test to use ksft framework
  selftests/breakpoints: change test to use ksft framework
  selftests: add kselftest framework for uniform test reporting
  selftests/user: move test out of Makefile into a shell script
  selftests/net: move test out of Makefile into a shell script

Pull tracing updates from Steven Rostedt:
 "As the merge window is still open, and this code was not as complex as
  I thought it might be.  I'm pushing this in now.

  This will allow Thomas to debug his irq work for 3.20.

  This adds two new features:

  1) Allow traceopoints to be enabled right after mm_init().

     By passing in the trace_event= kernel command line parameter,
     tracepoints can be enabled at boot up.  For debugging things like
     the initialization of interrupts, it is needed to have tracepoints
     enabled very early.  People have asked about this before and this
     has been on my todo list.  As it can be helpful for Thomas to debug
     his upcoming 3.20 IRQ work, I'm pushing this now.  This way he can
     add tracepoints into the IRQ set up and have users enable them when
     things go wrong.

  2) Have the tracepoints printed via printk() (the console) when they
     are triggered.

     If the irq code locks up or reboots the box, having the tracepoint
     output go into the kernel ring buffer is useless for debugging.
     But being able to add the tp_printk kernel command line option
     along with the trace_event= option will have these tracepoints
     printed as they occur, and that can be really useful for debugging
     early lock up or reboot problems.

  This code is not that intrusive and it passed all my tests.  Thomas
  tried them out too and it works for his needs.

   Link: http://lkml.kernel.org/r/20141214201609.126831471@goodmis.org"

* tag 'trace-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Add tp_printk cmdline to have tracepoints go to printk()
  tracing: Move enabling tracepoints to just after rcu_init()

Merge tag 'renesas-defconfig-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

Pull "Renesas ARM Based SoC Defconfig Fixes for v3.19" from Simon Horman:

* Revert change enabling RCAR_AUDMAC_PP in shmobile_defconfig

  Unfortunately enabling RCAR_AUDMAC_PP support this patch breaks dmaengine
  support on R-Car Gen2 boards. This should be resolved by driver updates
  in v3.20. But v3.19 was too early for this defconfig change.

* tag 'renesas-defconfig-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  Revert "ARM: shmobile: multiplatform: add Audo DMAC peri peri support on defconfig"
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The Exynos IOMMU driver uses the ARM specific dmac_flush_range() and
outer_flush_range() functions. This breaks the build on arm64 allmodconfig
in -next since support has been merged for some Exynos ARMv8 SoCs. Add a
dependency on ARM to keep things building until either the driver has the
ARM dependencies removed or the ARMv8 architecture code implements these
ARM specific APIs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The default linker behavior is to optimize identical literal values
and remove unnecessary overhead. However, because of a bug in the
linker, this currently results in an error ('call target out of range').

Disable link-time optimizations per default until there is a fix
for the linker and add the option to iss_defconfig.
Signed-off-by: Chris Zankel <chris@zankel.net>

virtio wants to read bitwise types from userspace using get_user.  At the
moment this triggers sparse errors, since the value is passed through an
integer.

Fix that up using __force.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Xtensa improvements for 3.19:

- fix permissions for kmapped pages so that copy_to_user_page works with
  them;
- add power management menu to Kconfig to allow use of runtime PM.

Linux 3.18

Pull LED subsystem update from Bryan Wu:
 "We got some cleanup and driver for LP8860 as well as some patches for
  LED Flash Class"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: lp8860: Fix module dependency
  leds: lp8860: Introduce TI lp8860 4 channel LED driver
  leds: Add support for setting brightness in a synchronous way
  leds: implement sysfs interface locking mechanism
  leds: syscon: handle multiple syscon instances
  leds: delete copy/paste mistake
  leds: regulator: Convert to devm_regulator_get_exclusive

Pull staging driver updates from Greg KH:
 "Here's the big staging tree pull request for 3.19-rc1.

  We continued to delete more lines than were added, always a good
  thing, but not at a huge rate this release, only about 70k lines
  removed overall mostly from removing the horrid bcm driver.

  Lots of normal staging driver cleanups and fixes all over the place,
  well over a thousand of them, the shortlog shows all the horrid
  details.

  The "contentious" thing here is the movement of the Android binder
  code out of staging into the "real" part of the kernel.  This is code
  that has been stable for a few years now and is working as-is in the
  tens of millions of devices with no issues.  Yes, the code is horrid,
  and the userspace api leaves a lot to be desired, but it's not going
  to change due to legacy issues that we have no control over.  Because
  so many devices and companies rely on this, and the code is stable,
  might as well promote it out of staging.

  This was all discussed at the Linux Plumbers conference, and everyone
  participating agreed that this was the best way forward.

  There is work happening to replace the binder code with something new
  that is happening right now, but I don't expect to see the results of
  that work for another year at the earliest.  If that ever happens, and
  Android switches over to it, I'll gladly remove this version.

  As for maintainers, I'll be glad to maintain this code, I've been
  doing it for the past few years with no problems.  I'll send a
  MAINTAINERS entry for it before 3.19-final is out, still need to talk
  to the Google developers about if they are willing to help with it or
  not, last I checked they were, which was good.

  All of these patches have been in linux-next for a while with no
  reported issues"

* tag 'staging-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1382 commits)
  Staging: slicoss: Fix long line issues in slicoss.c
  staging: rtl8712: remove unnecessary else after return
  staging: comedi: change some printk calls to pr_err
  staging: rtl8723au: hal: Removed the extra semicolon
  lustre: Deletion of unnecessary checks before three function calls
  staging: lustre: fix sparse warnings: static function declaration
  staging: lustre: fixed sparse warnings related to static declarations
  staging: unisys: remove duplicate header
  staging: unisys: remove unneeded structure
  staging: ft1000 : replace __attribute ((__packed__) with __packed
  drivers: staging: rtl8192e: Include "asm/unaligned.h" instead of "access_ok.h" in "rtl819x_BAProc.c"
  Drivers:staging:rtl8192e: Fixed checkpatch warning
  Drivers:staging:clocking-wizard: Added a newline
  staging: clocking-wizard: check for a valid clk_name pointer
  staging: rtl8723au: Hal_InitPGData() avoid unnecessary typecasts
  staging: rtl8723au: _DisableAnalog(): Avoid zero-init variables unnecessarily
  staging: rtl8723au: Remove unnecessary wrapper _ResetDigitalProcedure1()
  staging: rtl8723au: _ResetDigitalProcedure1_92C() reduce code obfuscation
  staging: rtl8723au: Remove unnecessary wrapper _DisableRFAFEAndResetBB()
  staging: rtl8723au: _DisableRFAFEAndResetBB8192C(): Reduce code obfuscation
  ...

Pull firewire updates from Stefan Richter:
 "IEEE 1394 subsystem updates:
   - clean up firewire-ohci's longlived vm-mapping
   - use target instance lock instead of core lock in firewire-sbp2"

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: sbp2: replace card lock by target lock
  firewire: sbp2: replace some spin_lock_irqsave by spin_lock_irq
  firewire: sbp2: protect a reference counter properly
  firewire: core: document fw_csr_string's truncation of long strings
  firewire: ohci: replace vm_map_ram() with vmap()

Pull power supply updates from Sebastian Reichel::
 "Power supply and reset changes for the v3.19 series

   - update power/reset drivers to use kernel restart handler
   - add power off driver for i.mx6
   - add DT support for gpio-charger"

* tag 'for-v3.19' of git://git.infradead.org/battery-2.6:
  power: reset: adjust priority of simple syscon reboot driver
  power: ds2782_battery: Simplify the PM hooks
  power/reset: brcmstb: Register with kernel restart handler
  power/reset: hisi: Register with kernel restart handler
  power/reset: keystone: Register with kernel restart handler
  power/reset: axxia: Register with kernel restart handler
  power/reset: xgene: Register with kernel restart handler
  power/reset: xgene: Use mdelay instead of jiffies based timeout
  power/reset: xgene: Use local variable dev instead of pdev->dev
  power/reset: xgene: Drop devm_kfree
  power/reset: xgene: Return -ENOMEM if out of memory
  power/reset: vexpress: Register with kernel restart handler
  power: reset: imx-snvs-poweroff: add power off driver for i.mx6
  power: gpio-charger: add device tree support
  dt-bindings: document gpio-charger bindings

Pull HSI update from Sebastian Reichel:
 "Misc fixes in omap-ssi and nokia-modem drivers"

* tag 'hsi-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: nokia-modem: fix error handling of irq_of_parse_and_map
  HSI: nokia-modem: setup default value for pm parameter
  HSI: omap_ssi_port: Don't print uninitialized err
  HSI: remove deprecated IRQF_DISABLED

Pull irq domain ARM updates from Thomas Gleixner:
 "This set of changes make use of hierarchical irqdomains to provide:

   - MSI/ITS support for GICv3
   - MSI support for GICv2m
   - Interrupt polarity extender for GICv1

  Marc has come more cleanups for the existing extension hooks of GIC in
  the pipeline, but they are going to be 3.20 material"

* 'irq-irqdomain-arm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  irqchip: gicv3-its: Fix ITT allocation
  irqchip: gicv3-its: Move some alloc/free code to activate/deactivate
  irqchip: gicv3-its: Fix domain free in multi-MSI case
  irqchip: gic: Remove warning by including linux/irqdomain.h
  irqchip: gic-v2m: Add DT bindings for GICv2m
  irqchip: gic-v2m: Add support for ARM GICv2m MSI(-X) doorbell
  irqchip: mtk-sysirq: dt-bindings: Add bindings for mediatek sysirq
  irqchip: mtk-sysirq: Add sysirq interrupt polarity support
  irqchip: gic: Support hierarchy irq domain.
  irqchip: GICv3: Binding updates for ITS
  irqchip: GICv3: ITS: enable compilation of the ITS driver
  irqchip: GICv3: ITS: plug ITS init into main GICv3 code
  irqchip: GICv3: ITS: DT probing and initialization
  irqchip: GICv3: ITS: MSI support
  irqchip: GICv3: ITS: device allocation and configuration
  irqchip: GICv3: ITS: tables allocators
  irqchip: GICv3: ITS: LPI allocator
  irqchip: GICv3: ITS: irqchip implementation
  irqchip: GICv3: ITS command queue
  irqchip: GICv3: rework redistributor structure
  ...

Pull core block fix from Jens Axboe:
 "Jan reported a problem this morning with a crash in blk-mq, and after
  looking over the recent changes, it's obvious that the blk-mq-tag
  waitqueue handling change is buggy.  We could end up _not_ doing
  finish_wait() before switching to a new waitqueue, thus corrupting the
  wait task list"

* 'for-linus' of git://git.kernel.dk/linux-block:
  Revert "blk-mq: Micro-optimize bt_get()"

Pull rpmsg update from Ohad Ben-Cohen:
 "A single patch from Suman Anna which makes rpmsg use less buffers when
  small vrings are being used"

* tag 'rpmsg-3.19-next' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg:
  rpmsg: use less buffers when vrings are small

Pull drm updates from Dave Airlie:
 "Highlights:

   - AMD KFD driver merge

     This is the AMD HSA interface for exposing a lowlevel interface for
     GPGPU use.  They have an open source userspace built on top of this
     interface, and the code looks as good as it was going to get out of
     tree.

   - Initial atomic modesetting work

     The need for an atomic modesetting interface to allow userspace to
     try and send a complete set of modesetting state to the driver has
     arisen, and been suffering from neglect this past year.  No more,
     the start of the common code and changes for msm driver to use it
     are in this tree.  Ongoing work to get the userspace ioctl finished
     and the code clean will probably wait until next kernel.

   - DisplayID 1.3 and tiled monitor exposed to userspace.

     Tiled monitor property is now exposed for userspace to make use of.

   - Rockchip drm driver merged.

   - imx gpu driver moved out of staging

  Other stuff:

   - core:
        panel - MIPI DSI + new panels.
        expose suggested x/y properties for virtual GPUs

   - i915:
        Initial Skylake (SKL) support
        gen3/4 reset work
        start of dri1/ums removal
        infoframe tracking
        fixes for lots of things.

   - nouveau:
        tegra k1 voltage support
        GM204 modesetting support
        GT21x memory reclocking work

   - radeon:
        CI dpm fixes
        GPUVM improvements
        Initial DPM fan control

   - rcar-du:
        HDMI support added
        removed some support for old boards
        slave encoder driver for Analog Devices adv7511

   - exynos:
        Exynos4415 SoC support

   - msm:
        a4xx gpu support
        atomic helper conversion

   - tegra:
        iommu support
        universal plane support
        ganged-mode DSI support

   - sti:
        HDMI i2c improvements

   - vmwgfx:
        some late fixes.

   - qxl:
        use suggested x/y properties"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits)
  drm: sti: fix module compilation issue
  drm/i915: save/restore GMBUS freq across suspend/resume on gen4
  drm: sti: correctly cleanup CRTC and planes
  drm: sti: add HQVDP plane
  drm: sti: add cursor plane
  drm: sti: enable auxiliary CRTC
  drm: sti: fix delay in VTG programming
  drm: sti: prepare sti_tvout to support auxiliary crtc
  drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off}
  drm: sti: fix hdmi avi infoframe
  drm: sti: remove event lock while disabling vblank
  drm: sti: simplify gdp code
  drm: sti: clear all mixer control
  drm: sti: remove gpio for HDMI hot plug detection
  drm: sti: allow to change hdmi ddc i2c adapter
  drm/doc: Document drm_add_modes_noedid() usage
  drm/i915: Remove '& 0xffff' from the mask given to WA_REG()
  drm/i915: Invert the mask and val arguments in wa_add() and WA_REG()
  drm: Zero out DRM object memory upon cleanup
  drm/i915/bdw: Fix the write setting up the WIZ hashing mode
  ...

The VM_FAULT_RETRY handling was confusing and incorrect for the case of
returning to kernel mode.  We need to handle the exception table fixup
if we return to kernel mode due to a fatal signal - it will basically
look to the kernel user mode access like the access failed due to the VM
going away from udner it.  Which is correct - the process is dying - and
avoids the whole "repeat endless kernel page faults" case.

Handling the VM_FAULT_RETRY early and in just one place also simplifies
the mmap_sem handling, since once we've taken care of VM_FAULT_RETRY we
know that we can just drop the lock.  The remaining accounting and
possible error handling is thread-local and does not need the mmap_sem.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This replaces four copies in various stages of mm_fault_error() handling
with just a single one.  It will also allow for more natural placement
of the unlocking after some further cleanup.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'omap-for-v3.19/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From: Tony Lindgren <tony@atomide.com>
Subject: [GIT PULL] few fixes for the v3.19 merge window

Fixes for a few issues found that would be good to get
into -rc1:

- Update SoC revision detection for am43x es1.2

- Fix regression with GPMC timings on 2430sdp for some versions
  of u-boot

- Fix dra7 watchdog compatible property

- Fix am437x-sk-evm LCD timings

- Fix dra7 DSS clock muxing

- Fix dra7-evm voltages

- Remove a unused function prototype for am33xx_clk_init

- Enable AHCI in the omap2plus_defconfig

* tag 'omap-for-v3.19/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (1601 commits)
  ARM: omap2plus_defconfig: Enable AHCI_PLATFORM driver
  ARM: dts: am437x-sk-evm.dts: fix LCD timings
  ARM: dts: dra7-evm: Update SMPS7 (VDD_CORE) max voltage to match DM
  ARM: dts: dra7-evm: Fix typo in SMPS6 (VDD_GPU) max voltage
  ARM: OMAP2+: AM43x: Add ID for ES1.2
  ARM: dts: am437x-sk: fix lcd enable pin mux data
  ARM: dts: Fix gpmc regression for omap 2430sdp smc91x
  hwmon: (tmp401) Detect TMP435 on all addresses it supports
  mfd: rtsx: Add func to split u32 into register
  mmc: sdhci-msm: Convert to mmc_send_tuning()
  mmc: sdhci-esdhc-imx: Convert to mmc_send_tuning()
  mmc: core: Let mmc_send_tuning() to take struct mmc_host* as parameter
  nios2: Make NIOS2_CMDLINE_IGNORE_DTB depend on CMDLINE_BOOL
  nios2: Add missing NR_CPUS to Kconfig
  nios2: asm-offsets: Remove unused definition TI_TASK
  nios2: Remove write-only struct member from nios2_timer
  nios2: Remove unused extern declaration of shm_align_mask
  nios2: include linux/type.h in io.h
  nios2: move include asm-generic/io.h to end of file
  nios2: remove include asm-generic/iomap.h from io.h
  ...

CONFIG_GENERIC_CPUFREQ_CPU0 disappeared with commit bbcf0719
("cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'") and some
defconfigs are still using it instead of the new one.

Use the renamed CONFIG_CPUFREQ_DT generic driver.

Cc: <stable@vger.kernel.org>        # 3.18
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

This reverts commit 52f7eb94.

The optimization is only really safe for a single queue, otherwise
'bs' and 'bt' can indeed change, and if we don't do a finish_wait()
for each loop, we'll potentially change the wait structure and
corrupt task wait list.
Reported-by: Jan Kara <jack@suse.cz>

Add the kernel command line tp_printk option that will have tracepoints
that are active sent to printk() as well as to the trace buffer.

Passing "tp_printk" will activate this. To turn it off, the sysctl
/proc/sys/kernel/tracepoint_printk can have '0' echoed into it. Note,
this only works if the cmdline option is used. Echoing 1 into the sysctl
file without the cmdline option will have no affect.

Note, this is a dangerous option. Having high frequency tracepoints send
their data to printk() can possibly cause a live lock. This is another
reason why this is only active if the command line option is used.

Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412121539300.16494@nanosSuggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Enabling tracepoints at boot up can be very useful. The tracepoint
can be initialized right after RCU has been. There's no need to
wait for the early_initcall() to be called. That's too late for some
things that can use tracepoints for debugging. Move the logic to
enable tracepoints out of the initcalls and into init/main.c to
right after rcu_init().

This also allows trace_printk() to be used early too.

Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412121539300.16494@nanos
Link: http://lkml.kernel.org/r/20141214164104.307127356@goodmis.orgReviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

When compiling in module some symbol aren't missing,
export them correctly.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull security layer updates from James Morris:
 "In terms of changes, there's general maintenance to the Smack,
  SELinux, and integrity code.

  The IMA code adds a new kconfig option, IMA_APPRAISE_SIGNED_INIT,
  which allows IMA appraisal to require signatures.  Support for reading
  keys from rootfs before init is call is also added"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits)
  selinux: Remove security_ops extern
  security: smack: fix out-of-bounds access in smk_parse_smack()
  VFS: refactor vfs_read()
  ima: require signature based appraisal
  integrity: provide a hook to load keys when rootfs is ready
  ima: load x509 certificate from the kernel
  integrity: provide a function to load x509 certificate from the kernel
  integrity: define a new function integrity_read_file()
  Security: smack: replace kzalloc with kmem_cache for inode_smack
  Smack: Lock mode for the floor and hat labels
  ima: added support for new kernel cmdline parameter ima_template_fmt
  ima: allocate field pointers array on demand in template_desc_init_fields()
  ima: don't allocate a copy of template_fmt in template_desc_init_fields()
  ima: display template format in meas. list if template name length is zero
  ima: added error messages to template-related functions
  ima: use atomic bit operations to protect policy update interface
  ima: ignore empty and with whitespaces policy lines
  ima: no need to allocate entry for comment
  ima: report policy load status
  ima: use path names cache
  ...

Pull char/misc driver updates from Greg KH:
 "Here's the big char/misc driver update for 3.19-rc1

  Lots of little things all over the place in different drivers, and a
  new subsystem, "coresight" has been added.  Full details are in the
  shortlog"

* tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (73 commits)
  parport: parport_pc, do not remove parent devices early
  spmi: Remove shutdown/suspend/resume kernel-doc
  carma-fpga-program: drop videobuf dependency
  carma-fpga: drop videobuf dependency
  carma-fpga-program.c: fix compile errors
  i8k: Fix temperature bug handling in i8k_get_temp()
  cxl: Name interrupts in /proc/interrupt
  CXL: Return error to PSL if IRQ demultiplexing fails & print clearer warning
  coresight-replicator: remove .owner field for driver
  coresight: fixed comments in coresight.h
  coresight: fix typo in comment in coresight-priv.h
  coresight: bindings for coresight drivers
  coresight: Adding ABI documentation
  w1: support auto-load of w1_bq27000 module.
  w1: avoid potential u16 overflow
  cn: verify msg->len before making callback
  mei: export fw status registers through sysfs
  mei: read and print all six FW status registers
  mei: txe: add cherrytrail device id
  mei: kill cached host and me csr values
  ...

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...

Pull tty/serial driver updates from Greg KH:
 "Here's the big tty/serial driver update for 3.19-rc1.

  There are a number of TTY core changes/fixes in here from Peter Hurley
  that have all been teted in linux-next for a long time now.  There are
  also the normal serial driver updates as well, full details in the
  changelog below"

* tag 'tty-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (219 commits)
  serial: pxa: hold port.lock when reporting modem line changes
  tty-hvsi_lib: Deletion of an unnecessary check before the function call "tty_kref_put"
  tty: Deletion of unnecessary checks before two function calls
  n_tty: Fix read_buf race condition, increment read_head after pushing data
  serial: of-serial: add PM suspend/resume support
  Revert "serial: of-serial: add PM suspend/resume support"
  Revert "serial: of-serial: fix up PM ops on no_console_suspend and port type"
  serial: 8250: don't attempt a trylock if in sysrq
  serial: core: Add big-endian iotype
  serial: samsung: use port->fifosize instead of hardcoded values
  serial: samsung: prefer to use fifosize from driver data
  serial: samsung: fix style problems
  serial: samsung: wait for transfer completion before clock disable
  serial: icom: fix error return code
  serial: tegra: clean up tty-flag assignments
  serial: Fix io address assign flow with Fintek PCI-to-UART Product
  serial: mxs-auart: fix tx_empty against shift register
  serial: mxs-auart: fix gpio change detection on interrupt
  serial: mxs-auart: Fix mxs_auart_set_ldisc()
  serial: 8250_dw: Use 64-bit access for OCTEON.
  ...

Pull USB updates from Greg KH:
 "Here's the big set of USB and PHY patches for 3.19-rc1.

  The normal churn in the USB gadget area is in here, as well as xhci
  and other individual USB driver updates.  The PHY tree is also in
  here, as there were dependancies on the USB tree.

  All of these have been in linux-next"

* tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits)
  arm: omap3: twl: remove usb phy init data
  usbip: fix error handling in stub_probe()
  usb: gadget: udc: missing curly braces
  USB: mos7720: delete some unneeded code
  wusb: replace memset by memzero_explicit
  usbip: remove unneeded structure
  usb: xhci: fix comment for PORT_DEV_REMOVE
  xhci: don't use the same variable for stopped and halted rings current TD
  xhci: clear extra bits from slot context when setting max exit latency
  xhci: cleanup finish_td function
  USB: adutux: NULL dereferences on disconnect
  usb: chipidea: fix platform_no_drv_owner.cocci warnings
  usb: chipidea: Fixed a few typos in comments
  Documentation: bindings: add doc for the USB2 ChipIdea USB driver
  usb: chipidea: add a usb2 driver for ci13xxx
  usb: chipidea: fix phy handling
  usb: chipidea: remove duplicate dev_set_drvdata for host_start
  usb: chipidea: parameter 'mode' isn't needed for hw_device_reset
  usb: chipidea: add controller reset API
  usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER
  ...

Pull squashfs update from Phillip Lougher:
 "These patches optionally add LZ4 compression support to Squashfs.

  LZ4 is a lightweight compression algorithm which can be used on
  embedded systems to reduce CPU and memory overhead (in comparison to
  the standard zlib compression).

  These patches add the wrapper code to allow Squashfs to use the
  existing LZ4 decompression code, and the necessary configuration
  option"

* tag 'squashfs-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next:
  Squashfs: Add LZ4 compression configuration option
  Squashfs: add LZ4 compression support

Pull take two of the GPIO updates:
 "Same stuff as last time, now with a fixup patch for the previous
  compile error plus I ran a few extra rounds of compile-testing.

  This is the bulk of GPIO changes for the v3.19 series:

   - A new API that allows setting more than one GPIO at the time.  This
     is implemented for the new descriptor-based API only and makes it
     possible to e.g. toggle a clock and data line at the same time, if
     the hardware can do this with a single register write.  Both
     consumers and drivers need new calls, and the core will fall back
     to driving individual lines where needed.  Implemented for the
     MPC8xxx driver initially

   - Patched the mdio-mux-gpio and the serial mctrl driver that drives
     modems to use the new multiple-setting API to set several signals
     simultaneously

   - Get rid of the global GPIO descriptor array, and instead allocate
     descriptors dynamically for each GPIO on a certain GPIO chip.  This
     moves us closer to getting rid of the limitation of using the
     global, static GPIO numberspace

   - New driver and device tree bindings for 74xx ICs

   - New driver and device tree bindings for the VF610 Vybrid

   - Support the RCAR r8a7793 and r8a7794

   - Guidelines for GPIO device tree bindings trying to get things a bit
     more strict with the advent of combined device properties

   - Suspend/resume support for the MVEBU driver

   - A slew of minor fixes and improvements"

* tag 'gpio-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (33 commits)
  gpio: mcp23s08: fix up compilation error
  gpio: pl061: document gpio-ranges property for bindings file
  gpio: pl061: hook request if gpio-ranges avaiable
  gpio: mcp23s08: Add option to configure IRQ output polarity as active high
  gpio: fix deferred probe detection for legacy API
  serial: mctrl_gpio: use gpiod_set_array function
  mdio-mux-gpio: Use GPIO descriptor interface and new gpiod_set_array function
  gpio: remove const modifier from gpiod_get_direction()
  gpio: remove gpio_descs global array
  gpio: mxs: implement get_direction callback
  gpio: em: Use dynamic allocation of GPIOs
  gpio: Check if base is positive before calling gpio_is_valid()
  gpio: mcp23s08: Add simple IRQ support for SPI devices
  gpio: mcp23s08: request a shared interrupt
  gpio: mcp23s08: Do not free unrequested interrupt
  gpio: rcar: Add r8a7793 and r8a7794 support
  gpio-mpc8xxx: add mpc8xxx_gpio_set_multiple function
  gpiolib: allow simultaneous setting of multiple GPIO outputs
  gpio: mvebu: add suspend/resume support
  gpio: gpio-davinci: remove duplicate check on resource
  ..

Pull aio updates from Benjamin LaHaise.

* git://git.kvack.org/~bcrl/aio-next:
  aio: Skip timer for io_getevents if timeout=0
  aio: Make it possible to remap aio ring

Pull i2c updates from Wolfram Sang:
 "For 3.19, the I2C subsystem has to offer special candy this time.
  Right in time for Christmas :)

   - I2C slave framework: finally, a generic mechanism for Linux being
     an I2C slave (if the bus driver supports that).  Docs are still
     missing but will come later this cycle, the code is good enough to
     go.
   - I2C muxes represent their topology in sysfs much more detailed.
     This will help users to navigate around much easier.
   - irq population of i2c clients is now done at probe time, not device
     creation time, to have better support for deferred probing.
   - new drivers for Imagination SCB, Amlogic Meson
   - DMA support added for Freescale IMX, Renesas SHMobile
   - slightly bigger driver updates to OMAP, i801, AT91, and rk3x
     (mostly quirk handling, timing updates, and using better kernel
     interfaces)
   - eeprom driver can now write with byte-access (very slow, but OK to
     have)
   - and the bunch of smaller fixes, cleanups, ID updates..."

* 'i2c/for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (56 commits)
  i2c: sh_mobile: remove unneeded DMA mask
  i2c: rcar: add slave support
  i2c: slave-eeprom: add eeprom simulator driver
  i2c: core changes for slave support
  MAINTAINERS: add I2C dt bindings also to I2C realm
  i2c: designware: Fix falling time bindings doc
  i2c: davinci: switch to use platform_get_irq
  Documentation: i2c: Use PM ops instead of legacy suspend/resume
  i2c: sh_mobile: optimize irq entry
  i2c: pxa: add support for SCCB devices
  omap: i2c: don't check bus state IP rev3.3 and earlier
  i2c: s3c2410: Handle i2c sys_cfg register in i2c driver
  i2c: rk3x: add Kconfig dependency on COMMON_CLK
  i2c: omap: add notes related to i2c multimaster mode
  i2c: omap: don't reset controller if Arbitration Lost detected
  i2c: omap: implement workaround for handling invalid BB-bit values
  i2c: omap: cleanup register definitions
  i2c: rk3x: handle dynamic clock rate changes correctly
  i2c: at91: enable probe deferring on dma channel request
  i2c: at91: remove legacy DMA support
  ...