- 07 Mar, 2022 9 commits
-
-
Sebastian Andrzej Siewior authored
Since commit baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Antonio Quartulli <a@unstable.cc> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Sven Eckelmann <sven@narfation.org> Cc: b.a.t.m.a.n@lists.open-mesh.org Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sebastian Andrzej Siewior authored
Since commit baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: tipc-discussion@lists.sourceforge.net Signed-off-by:
-
Sebastian Andrzej Siewior authored
Since commit baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Signed-off-by:
-
Sebastian Andrzej Siewior authored
Since commit baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-staging@lists.linux.dev Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Sebastian Andrzej Siewior authored
Since commit baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandra Winter <wintera@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Wenjia Zhang <wenjia@linux.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by:
-
David S. Miller authored
Kurt Kanzenbach says: ==================== ptp: Add generic is_sync() function as multiple PHY drivers such as micrel or TI dp83640 need to inspect whether a given skb represents a PTP Sync message, provide a generic function for it. This avoids code duplication and can be reused by future PHY IEEE 1588 implementations. ==================== Signed-off-by: -
Kurt Kanzenbach authored
Use generic ptp_msg_is_sync() function to avoid code duplication. Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by:
-
Kurt Kanzenbach authored
Use generic ptp_msg_is_sync() function to avoid code duplication. Signed-off-by:
-
Kurt Kanzenbach authored
PHY drivers such as micrel or dp83640 need to analyze whether a given skb is a PTP sync message for one step functionality. In order to avoid code duplication introduce a generic function and move it to ptp classify. Signed-off-by:
-
- 06 Mar, 2022 15 commits
-
-
Lianjie Zhang authored
Signed-off-by:
Lianjie Zhang <zhanglianjie@uniontech.com> Signed-off-by:
-
David S. Miller authored
Sebastian Andrzej Siewior says: ==================== net: Convert user to netif_rx(), part 2. This is the second batch of converting netif_rx_ni() caller to netif_rx(). The change making this possible is net-next and netif_rx_ni() is a wrapper around netif_rx(). This is a clean up in order to remove netif_rx_ni(). The brcmfmac changes are slilghtly larger because the inirq parameter can be removed. ==================== Signed-off-by: -
Sebastian Andrzej Siewior authored
Since commit baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org Signed-off-by:
-
Sebastian Andrzej Siewior authored
Since commit baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Ganapathi Bhat <ganapathi017@gmail.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: Sharvari Harisangam <sharvari.harisangam@nxp.com> Cc: Xinming Hu <huxinming820@gmail.com> Cc: libertas-dev@lists.infradead.org Cc: linux-wireless@vger.kernel.org Signed-off-by:
-
Sebastian Andrzej Siewior authored
Since commit baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Arend van Spriel <aspriel@gmail.com> Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com> Cc: Chung-hsien Hsu <chung-hsien.hsu@infineon.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: SHA-cyfmac-dev-list@infineon.com Cc: Wright Feng <wright.feng@infineon.com> Cc: brcm80211-dev-list.pdl@broadcom.com Cc: linux-wireless@vger.kernel.org Signed-off-by:
-
Sebastian Andrzej Siewior authored
Since commit baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Kalle Valo <kvalo@kernel.org> Cc: Maya Erez <merez@codeaurora.org> Cc: linux-wireless@vger.kernel.org Cc: wil6210@qti.qualcomm.com Signed-off-by:
-
Sebastian Andrzej Siewior authored
Since commit baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Sebastian Andrzej Siewior authored
Since commit baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Jeremy Kerr <jk@codeconstruct.com.au> Cc: Matt Johnston <matt@codeconstruct.com.au> Signed-off-by:
-
Sebastian Andrzej Siewior authored
Since commit baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-can@vger.kernel.org Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Sebastian Andrzej Siewior authored
Since commit baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Radu Pirea <radu-nicolae.pirea@oss.nxp.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
-
David S. Miller authored
Dongli Zhang says: ==================== tun/tap: use kfree_skb_reason() to trace dropped skb The commit c504e5c2 ("net: skb: introduce kfree_skb_reason()") has introduced the kfree_skb_reason() to help track the reason. The tun and tap are commonly used as virtio-net/vhost-net backend. This is to use kfree_skb_reason() to trace the dropped skb for those two drivers. Changed since v1: - I have renamed many of the reasons since v1. I make them as generic as possible so that they can be re-used by core networking and drivers. Changed since v2: - declare drop_reason as type "enum skb_drop_reason" - handle the drop in skb_list_walk_safe() case for tap driver, and kfree_skb_list_reason() is introduced Changed since v3 (only for PATCH 4/4): - rename to TAP_FILTER and TAP_TXFILTER - honor reverse xmas tree style declaration for 'drop_reason' in tun_net_xmit() Changed since v4: - make kfree_skb_list() static inline - add 'computation' to SKB_CSUM comment - change COPY_DATA to UCOPY_FAULT - add 'metadata' to DEV_HDR comment - expand comment on DEV_READY - change SKB_TRIM to NOMEM - chnage SKB_PULL to HDR_TRUNC Changed since v5: - rebase to net-next The following reasons are introduced. - SKB_DROP_REASON_SKB_CSUM - SKB_DROP_REASON_SKB_GSO_SEG - SKB_DROP_REASON_SKB_UCOPY_FAULT - SKB_DROP_REASON_DEV_HDR - SKB_DROP_REASON_FULL_RING - SKB_DROP_REASON_DEV_READY - SKB_DROP_REASON_NOMEM - SKB_DROP_REASON_HDR_TRUNC - SKB_DROP_REASON_TAP_FILTER - SKB_DROP_REASON_TAP_TXFILTER This is the output for TUN device. <idle>-0 [029] ..s1. 450.727651: kfree_skb: skbaddr=0000000023d235cc protocol=0 location=00000000a6748854 reason: NOT_SPECIFIED <idle>-0 [000] b.s3. 451.165671: kfree_skb: skbaddr=000000006b5de7cc protocol=4 location=000000007c2b9eae reason: FULL_RING <idle>-0 [000] b.s3. 453.149650: kfree_skb: skbaddr=000000006b5de7cc protocol=4 location=000000007c2b9eae reason: FULL_RING <idle>-0 [000] b.s3. 455.133576: kfree_skb: skbaddr=000000006b5de7cc protocol=4 location=000000007c2b9eae reason: FULL_RING <idle>-0 [000] b.s3. 457.117566: kfree_skb: skbaddr=000000006b5de7cc protocol=4 location=000000007c2b9eae reason: FULL_RING This is the output for TAP device. arping-7053 [006] ..s1. 1000.047753: kfree_skb: skbaddr=000000008618a587 protocol=2054 location=00000000743ad4a7 reason: FULL_RING <idle>-0 [022] ..s1. 1000.778514: kfree_skb: skbaddr=000000002c1e706c protocol=0 location=00000000a6748854 reason: NOT_SPECIFIED arping-7053 [006] ..s1. 1001.047830: kfree_skb: skbaddr=000000008618a587 protocol=2054 location=00000000743ad4a7 reason: FULL_RING arping-7053 [006] ..s1. 1002.047918: kfree_skb: skbaddr=000000008618a587 protocol=2054 location=00000000743ad4a7 reason: FULL_RING arping-7053 [006] ..s1. 1003.048017: kfree_skb: skbaddr=000000008618a587 protocol=2054 location=00000000743ad4a7 reason: FULL_RING ==================== Signed-off-by:
-
Dongli Zhang authored
The TUN can be used as vhost-net backend. E.g, the tun_net_xmit() is the interface to forward the skb from TUN to vhost-net/virtio-net. However, there are many "goto drop" in the TUN driver. Therefore, the kfree_skb_reason() is involved at each "goto drop" to help userspace ftrace/ebpf to track the reason for the loss of packets. The below reasons are introduced: - SKB_DROP_REASON_DEV_READY - SKB_DROP_REASON_NOMEM - SKB_DROP_REASON_HDR_TRUNC - SKB_DROP_REASON_TAP_FILTER - SKB_DROP_REASON_TAP_TXFILTER Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by:
Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by:
-
Dongli Zhang authored
No functional change. Just to split the if statement into different conditions to use kfree_skb_reason() to trace the reason later. Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Dongli Zhang authored
The TAP can be used as vhost-net backend. E.g., the tap_handle_frame() is the interface to forward the skb from TAP to vhost-net/virtio-net. However, there are many "goto drop" in the TAP driver. Therefore, the kfree_skb_reason() is involved at each "goto drop" to help userspace ftrace/ebpf to track the reason for the loss of packets. The below reasons are introduced: - SKB_DROP_REASON_SKB_CSUM - SKB_DROP_REASON_SKB_GSO_SEG - SKB_DROP_REASON_SKB_UCOPY_FAULT - SKB_DROP_REASON_DEV_HDR - SKB_DROP_REASON_FULL_RING Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by:
-
Dust Li authored
This reverts commit a505cce6. Leon says: We already discussed that. SMC should be changed to use RDMA CQ pool API drivers/infiniband/core/cq.c. ib_poll_handler() has much better implementation (tracing, IRQ rescheduling, proper error handling) than this SMC variant. Since we will switch to ib_poll_handler() in the future, revert this patch. Link: https://lore.kernel.org/netdev/20220301105332.GA9417@linux.alibaba.com/Suggested-by:
Leon Romanovsky <leon@kernel.org> Suggested-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Dust Li <dust.li@linux.alibaba.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
- 05 Mar, 2022 16 commits
-
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Updates. This patch series contains mainly NVRAM related features. More NVRAM error checking and logging are added when installing firmware packages. A new devlink hw health report is now added to report and diagnose NVRAM issues. Other miscellaneous patches include reporting correctly cards that don't support link pause, adding an internal unknown link state, and avoiding unnecessary link toggle during firmware reset. ==================== Signed-off-by: -
Vikas Gupta authored
Add an NVM test function for devlink hw reporter. In this function an NVM VPD area is read followed by a write. Test result is cached and if it is successful then the next test can be conducted only after HW_RETEST_MIN_TIME to avoid frequent writes to the NVM. Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Kalesh AP authored
This reporter will report NVM errors which are non-fatal. When we receive these NVM error events, we'll report it through this new hw health reporter. Reviewed-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by:
-
Edwin Peer authored
Health reporter state should be maintained over resets. Previously reporters were destroyed if the device capabilities changed, but since none of the reporters depend on capabilities anymore, this logic should be removed. Signed-off-by:
-
Michael Chan authored
If the flow control settings have been changed, a subsequent FW reset may cause the ethernet link to toggle unnecessarily. This link toggle will increase the down time by a few seconds. The problem is caused by bnxt_update_phy_setting() detecting a false mismatch in the flow control settings between the stored software settings and the current FW settings after the FW reset. This mismatch is caused by the AUTONEG bit added to link_info->req_flow_ctrl in an inconsistent way in bnxt_set_pauseparam() in autoneg mode. The AUTONEG bit should not be added to link_info->req_flow_ctrl. Reviewed-by:
Colin Winegarden <colin.winegarden@broadcom.com> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
-
Michael Chan authored
Some cards are configured to never support link pause or PFC. Discover these cards and properly report no pause support to ethtool. Disable PFC settings from DCBNL if PFC is unsupported. Reviewed-by:
-
Edwin Peer authored
This will force link state to always be logged for initial NIC open. Signed-off-by:
-
Kalesh AP authored
Instead of always returning -ENOPKG, decode the firmware error code further when the HWRM_NVM_INSTALL_UPDATE firmware call fails. Return a more suitable error code to userspace and log an error in dmesg. Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by:
-
Kalesh AP authored
FW returns error code "NVM_INSTALL_UPDATE_CMD_ERR_CODE_ANTI_ROLLBACK" in the response to indicate that HWRM_NVM_INSTALL_UPDATE command has failed due to Anti-rollback feature. Parse the error and return an appropriate error code to the user. Reviewed-by:
-
Kalesh AP authored
This is in anticipation of handling more "cmd_err" from FW in the next patch. Reviewed-by:
-
David S. Miller authored
Robert Hancock says: ==================== NAPI/GRO support for axienet driver Add support for NAPI and GRO receive in the Xilinx AXI Ethernet driver, and some other related cleanups. ==================== Signed-off-by: -
Robert Hancock authored
Add the ability to configure the RX/TX coalesce timer with ethtool. Change default setting to scale with the clock rate rather than being a fixed number of clock cycles. Signed-off-by:
Robert Hancock <robert.hancock@calian.com> Signed-off-by:
-
Robert Hancock authored
Now that NAPI has been implemented, the hardware interrupt mitigation mechanism is not needed to avoid excessive interrupt load in most cases. Reduce the default RX interrupt threshold to 1 to reduce introduced latency. This can be increased with ethtool if desired if some applications still want to reduce interrupts. Signed-off-by:
-
Robert Hancock authored
Implement NAPI and GRO receive. In addition to better performance, this also avoids handling RX packets in hard IRQ context, which reduces the IRQ latency impact to other devices. Signed-off-by:
-
Robert Hancock authored
When the RX or TX coalesce count is set to 1, there's no point in setting the delay timer value since an interrupt will already be raised on every packet, and the delay interrupt just causes extra pointless interrupts. Signed-off-by:
-
Robert Hancock authored
Simplify the DMA error handling process, and remove some duplicated code between the DMA error handling and the stop function. Signed-off-by:
-
