- 04 Dec, 2023 33 commits
-
-
Sakari Ailus authored
Provide a few bits for drivers to store private information on register definitions. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Sakari Ailus authored
linux/bits.h is needed for GENMASK(). Include it. Signed-off-by:
-
Laurent Pinchart authored
The isc_try_fse() function, called from isc_validate(), takes two parameters, an isc_device pointer, and a v4l2_subdev_state pointer. The isc_device is accessed but not modified by the function. The state is modified, including the struct v4l2_subdev_pad_config array it points to, but they are then never used by the caller. Furthermore, the V4L2 subdev operation called by isc_try_fse() doesn't modify the subdev it is called on. The isc_try_fse() function has thus no effect, and can just be dropped. Signed-off-by:
Eugen Hristev <eugen.hristev@collabora.com> Tested-by:
-
Sakari Ailus authored
Document that sub-device initialisation needs to complete before the async sub-device is registered as there is no further driver action needed before the sensor becomes accessible via the UAPI. Signed-off-by:
-
Sakari Ailus authored
As the sensor may be accessible right after its async sub-device is registered, enable runtime PM before doing so. Signed-off-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by:
-
Sakari Ailus authored
A number of CCS register value limits are in ireal or float format. Also convert them to integers for easier interpretation. Signed-off-by:
-
Bingbu Cao authored
As the sensor device maybe accessible right after its async sub-device is registered, such as ipu-bridge will try to power up sensor by sensor's client device's runtime PM from the async notifier callback, if runtime PM is not enabled, it will fail. So runtime PM should be ready before its async sub-device is registered and accessible by others. Fixes: d3f863a6 ("media: i2c: Add ov9734 image sensor driver") Cc: stable@vger.kernel.org Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
-
Bingbu Cao authored
As the sensor device maybe accessible right after its async sub-device is registered, such as ipu-bridge will try to power up sensor by sensor's client device's runtime PM from the async notifier callback, if runtime PM is not enabled, it will fail. So runtime PM should be ready before its async sub-device is registered and accessible by others. Fixes: 7ee85054 ("media: Add sensor driver support for the ov13b10 camera.") Cc: stable@vger.kernel.org Signed-off-by:
-
Bingbu Cao authored
As the sensor device maybe accessible right after its async sub-device is registered, such as ipu-bridge will try to power up sensor by sensor's client device's runtime PM from the async notifier callback, if runtime PM is not enabled, it will fail. So runtime PM should be ready before its async sub-device is registered and accessible by others. It also sets the runtime PM status to active as the sensor was turned on by i2c-core. Fixes: 0827b58d ("media: i2c: add ov01a10 image sensor driver") Cc: stable@vger.kernel.org Signed-off-by:
-
Bingbu Cao authored
As the sensor device maybe accessible right after its async sub-device is registered, such as ipu-bridge will try to power up sensor by sensor's client device's runtime PM from the async notifier callback, if runtime PM is not enabled, it will fail. So runtime PM should be ready before its async sub-device is registered and accessible by others. Fixes: df0b5c4a ("media: add imx355 camera sensor driver") Cc: stable@vger.kernel.org Signed-off-by:
-
Hugues Fruchet authored
This V4L2 subdev driver enables Digital Camera Memory Interface Pixel Processor(DCMIPP) of STMicroelectronics STM32 SoC series. Signed-off-by:
Hugues Fruchet <hugues.fruchet@foss.st.com> Signed-off-by:
Alain Volmat <alain.volmat@foss.st.com> Signed-off-by:
-
Alain Volmat authored
Add the entry related to the STM32 MEDIA DCMIPP driver within the MAINTAINERS file. Add myself as maintainer of the DCMI driver as well. Signed-off-by:
-
Alain Volmat authored
Add the yaml binding for the ST Microelectronics STM32 DCMIPP (Digital Camera Memory Interface Pixel Processor) Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
-
Alain Volmat authored
Allow parsing of the v4l2_fwnode properties from the DT and addition of those properties (such as orientation, rotation). Signed-off-by:
-
Alain Volmat authored
Any V4L2 subdevice that implements controls and declares V4L2_SUBDEV_FL_HAS_DEVNODE should also declare V4L2_SUBDEV_FL_HAS_EVENTS and implement subscribe_event and unsubscribe_event hooks. With that done, v4l2-compliance testing is now ok. Signed-off-by:
-
Alain Volmat authored
Add support of MEDIA_BUS_FMT_Y8_1X8. Signed-off-by:
-
Alain Volmat authored
link_frequency variable within struct mipid02_dev seems to have never been used hence remove it. Signed-off-by:
-
Alain Volmat authored
Use MIPI data-type macros. Signed-off-by:
-
Alain Volmat authored
Store formats information within pad allowing to simplify further more the driver (mutex / format store within the driver structure no more necessary). Signed-off-by:
-
Alain Volmat authored
Use cci_read & cci_write functions for accessing registers. Signed-off-by:
-
Alain Volmat authored
As explained in the following series, subdev do not have to keep track of their streaming status: https://lore.kernel.org/linux-media/20230914181704.4811-1-laurent.pinchart@ideasonboard.com/Signed-off-by:
-
Alain Volmat authored
Use the helper v4l2_get_link_freq instead of performing manually check of the LINK_FREQ or PIXELRATE ctrls. Signed-off-by:
-
Alain Volmat authored
Use a copy of the struct v4l2_subdev_format when propagating format from the sink to source pad in order to avoid impacting the sink format returned to the application. Thanks to Jacopo Mondi for pointing the issue. Fixes: 6c01e6f3 ("media: st-mipid02: Propagate format from sink to source pad") Signed-off-by:
Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by:
Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by:
Benjamin Mugnier <benjamin.mugnier@foss.st.com> Signed-off-by:
-
Sakari Ailus authored
Parse MIPI DisCo for Imaging properties "mipi-img-lens-focus" and "mipi-img-flash-leds" for VCMs and flash LEDs. Signed-off-by:
-
Laurent Pinchart authored
The subdev .init_cfg() operation is affected by two issues: - It has long been extended to initialize a whole v4l2_subdev_state instead of just a v4l2_subdev_pad_config, but its name has stuck around. - Despite operating on a whole subdev state and not being directly exposed to the subdev users (either in-kernel or through the userspace API), .init_cfg() is categorized as a subdev pad operation. This participates in making the subdev API confusing for new developers. Fix it by renaming the operation to .init_state(), and make it a subdev internal operation. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> [Sakari Ailus: Resolved a conflict in Renesas vsp1 driver.] Signed-off-by:
-
Paul Elder authored
The THP7312 is an external camera ISP from THine. Add a V4L2 subdev driver for it. Signed-off-by:
Paul Elder <paul.elder@ideasonboard.com> Co-developed-by:
-
Laurent Pinchart authored
The THP7312 is an external ISP from THine. As such, it implements a large number of parameters to control all aspects of the image processing. Many of those controls are already standard in V4L2, but some are fairly device-specific. Reserve a range of 32 controls for the device. The driver will implement 4 device-specific controls to start with, define and document them. 28 additional device-specific controls should be enough for future development. Co-developed-by:
-
Paul Elder authored
The THP7312 is an external ISP from THine. Add DT bindings for it. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sakari Ailus authored
Add fwnode_name_eq() to implement the functionality of of_node_name_eq() on fwnode property API. The same convention of ending the comparison at '@' (besides NUL) is applied on also both ACPI and swnode. The function is intended for comparing unit address-less node names on DT and firmware or swnodes compliant with DT bindings. Reviewed-by:
Rafael J. Wysocki <rafael@kernel.org> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Alain Volmat authored
Addition of support for the Galaxy Core GC2145 XVGA sensor. The sensor supports both DVP and CSI-2 interfaces however for the time being only CSI-2 is implemented. Configurations are currently based on initialization scripts coming from Galaxy Core and so for that purpose only 3 static resolutions are supported: - 640x480 - 1280x720 - 1600x1200 Signed-off-by:
-
Alain Volmat authored
Introduction of the Galaxy Core GC2145 XVGA CMOS camera sensor. Signed-off-by:
-
Alain Volmat authored
Add a vendor prefix entry for galaxycore (https://www.gcoreinc.com) Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Laurent Pinchart authored
V4L2 subdev operations have moved from operating on a v4l2_subdev_pad_config to a v4l2_subdev_state a long time ago. Fix remaining incorrect references to pad config in function and variable names. Signed-off-by:
-
- 03 Dec, 2023 4 commits
-
-
Hans Verkuil authored
Linux 6.7-rc4 This is needed for a vsp1 fix that upcoming media patches depend on. Signed-off-by: -
Linus Torvalds authored
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: - Two fallocate fixes - Fix warnings from new gcc - Two symlink fixes * tag 'v6.7-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb: client, common: fix fortify warnings cifs: Fix FALLOC_FL_INSERT_RANGE by setting i_size after EOF moved cifs: Fix FALLOC_FL_ZERO_RANGE by setting i_size if EOF moved smb: client: report correct st_size for SMB and NFS symlinks smb: client: fix missing mode bits for SMB symlinks
-
Linus Torvalds authored
Merge tag 'firewire-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fix from Takashi Sakamoto: "A single patch to fix long-standing issue of memory leak at failure of device registration for fw_unit. We rarely encounter the issue, but it should be applied to stable releases, since it fixes inappropriate API usage" * tag 'firewire-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: core: fix possible memory leak in create_units()
-
- 02 Dec, 2023 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix corruption of f0/vs0 during FP/Vector save, seen as userspace crashes when using io-uring workers (in particular with MariaDB) - Fix KVM_RUN potentially clobbering all host userspace FP/Vector registers Thanks to Timothy Pearson, Jens Axboe, and Nicholas Piggin. * tag 'powerpc-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S HV: Fix KVM_RUN clobbering FP/VEC user registers powerpc: Don't clobber f0/vs0 during fp|altivec register save
-
https://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull vfio fixes from Alex Williamson: - Fix the lifecycle of a mutex in the pds variant driver such that a reset prior to opening the device won't find it uninitialized. Implement the release path to symmetrically destroy the mutex. Also switch a different lock from spinlock to mutex as the code path has the potential to sleep and doesn't need the spinlock context otherwise (Brett Creeley) - Fix an issue detected via randconfig where KVM tries to symbol_get an undeclared function. The symbol is temporarily declared unconditionally here, which resolves the problem and avoids churn relative to a series pending for the next merge window which resolves some of this symbol ugliness, but also fixes Kconfig dependencies (Sean Christopherson) * tag 'vfio-v6.7-rc4' of https://github.com/awilliam/linux-vfio: vfio: Drop vfio_file_iommu_group() stub to fudge around a KVM wart vfio/pds: Fix possible sleep while in atomic context vfio/pds: Fix mutex lock->magic != lock warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: - A fix for the Xen event driver setting the correct return value when experiencing an allocation failure - A fix for allocating space for a struct in the percpu area to not cross page boundaries (this one is for x86, a similar one for Arm was already in the pull request for rc3) * tag 'for-linus-6.7a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: fix error code in xen_bind_pirq_msi_to_irq() x86/xen: fix percpu vcpu_info allocation
-
