- 20 Dec, 2023 6 commits
-
-
Ching-Te Ku authored
Including Wi-Fi RF mode to judge is Wi-Fi RF still on or off, if Wi-Fi is RF off should set scoreboard to let Bluetooth know Wi-Fi has gone. Every time the Wi-Fi radio state changed firmware should force execute refresh the TDMA coexistence mechanism to prevent incorrect mechanism runs at mismatch state. The coexistence antenna/TDMA settings should consider what the Wi-Fi mode it is now, this can help to solve some LPS transient state issue like A2DP slightly glitch. Signed-off-by:
Ching-Te Ku <ku920601@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231218061341.51255-7-pkshih@realtek.com
-
Ching-Te Ku authored
This can help to debug the grant signal and antenna path control issue during Wi-Fi power saving mode. Signed-off-by:
-
Ching-Te Ku authored
BTG is a RF system type, it means Wi-Fi 2.4GHz and Bluetooth share RF gain and antenna. The RF gain must control by Wi-Fi or Bluetooth in single side. For example, if Bluetooth RX a very strong signal, then Bluetooth will adjust to a lower gain. And Wi-Fi will also use the same gain to do RX, then maybe the gain will not enough. This BTG control mechanism can do some refine to this situation. Signed-off-by:
-
Ching-Te Ku authored
Pre-AGC(Auto gain control) is a hardware mechanism, it will auto adjust the RX gain for every packet, it can help to keep Wi-Fi signal on a well RX quality. The coexistence will give advice to control the API and monitor the settings by firmware report. Also add function to check register, these registers were monitoring by Wi-Fi firmware and report to coexistence driver periodically. This can help to track whether these settings were taking effect or not. Signed-off-by:
-
Ching-Te Ku authored
This information will use as judgment about how to set RF/HW parameters. Signed-off-by:
-
Ching-Te Ku authored
The Wi-Fi firmware 29.29.X should use version 2 role info format. FDDT mechanism version 5 use the same cell members to judge traffic situation, don't need to add another new format. Signed-off-by:
-
- 19 Dec, 2023 8 commits
-
-
Dmitry Antipov authored
Prefer generic 'cfg80211_ssid_eq()' over dropped 'rtw_ssid_equal()'. Compile tested only. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Link: https://msgid.link/20231215123859.196350-3-dmantipov@yandex.ruSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Dmitry Antipov authored
Prefer generic 'cfg80211_ssid_eq()' over dropped 'mwifiex_ssid_cmp()'. Compile tested only. Signed-off-by:
-
Dmitry Antipov authored
Since SSIDs comparison is commonly used across many drivers, introduce generic 'cfg80211_ssid_eq()' to replace driver-private implementations. Signed-off-by:
-
Zenm Chen authored
Add additional USB IDs found in the vendor driver from https://github.com/Mange/rtl8192eu-linux-driver to support more RTL8192EU devices. Signed-off-by:
Zenm Chen <zenmchen@gmail.com> Reviewed-by:
-
Ping-Ke Shih authored
After enabling DMAC and CMAC, configure detail registers one by one. DMAC includes DLE (data link engine), packet preload engine, HFC (HCI flow control) for DMA channels, security egine and etc. CMAC includes scheduler, address CAM, RX filter, CCA control and etc. The SER IMR is to configure to help SER. When hardware TX/RX get abnormal, it raises an interrupt to firmware to determine if send C2H events to notify driver to reset PCI bus or call ieee80211_restart_hw(). Signed-off-by:
-
Ping-Ke Shih authored
The sys_init is to enable hardware function block of DMAC (data-path MAC), CMAC (control-path MAC) and others called 'chip_func'. To understand the functionality of this function, we keep some functions as empty. The other is typ_fltr_opt that is to configure filter option to decide whether RX packets engine can forward packets to host or WiFi CPU. Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2023-12-18 This PR is larger than usual and contains changes in various parts of the kernel. The main changes are: 1) Fix kCFI bugs in BPF, from Peter Zijlstra. End result: all forms of indirect calls from BPF into kernel and from kernel into BPF work with CFI enabled. This allows BPF to work with CONFIG_FINEIBT=y. 2) Introduce BPF token object, from Andrii Nakryiko. It adds an ability to delegate a subset of BPF features from privileged daemon (e.g., systemd) through special mount options for userns-bound BPF FS to a trusted unprivileged application. The design accommodates suggestions from Christian Brauner and Paul Moore. Example: $ sudo mkdir -p /sys/fs/bpf/token $ sudo mount -t bpf bpffs /sys/fs/bpf/token \ -o delegate_cmds=prog_load:MAP_CREATE \ -o delegate_progs=kprobe \ -o delegate_attachs=xdp 3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei. - Complete precision tracking support for register spills - Fix verification of possibly-zero-sized stack accesses - Fix access to uninit stack slots - Track aligned STACK_ZERO cases as imprecise spilled registers. It improves the verifier "instructions processed" metric from single digit to 50-60% for some programs. - Fix verifier retval logic 4) Support for VLAN tag in XDP hints, from Larysa Zaremba. 5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu. End result: better memory utilization and lower I$ miss for calls to BPF via BPF trampoline. 6) Fix race between BPF prog accessing inner map and parallel delete, from Hou Tao. 7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu. It allows BPF interact with IPSEC infra. The intent is to support software RSS (via XDP) for the upcoming ipsec pcpu work. Experiments on AWS demonstrate single tunnel pcpu ipsec reaching line rate on 100G ENA nics. 8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao. 9) BPF file verification via fsverity, from Song Liu. It allows BPF progs get fsverity digest. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits) bpf: Ensure precise is reset to false in __mark_reg_const_zero() selftests/bpf: Add more uprobe multi fail tests bpf: Fail uprobe multi link with negative offset selftests/bpf: Test the release of map btf s390/bpf: Fix indirect trampoline generation selftests/bpf: Temporarily disable dummy_struct_ops test on s390 x86/cfi,bpf: Fix bpf_exception_cb() signature bpf: Fix dtor CFI cfi: Add CFI_NOSEAL() x86/cfi,bpf: Fix bpf_struct_ops CFI x86/cfi,bpf: Fix bpf_callback_t CFI x86/cfi,bpf: Fix BPF JIT call cfi: Flip headers selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment bpf: Limit the number of kprobes when attaching program to multiple kprobes bpf: Limit the number of uprobes when attaching program to multiple uprobes bpf: xdp: Register generic_kfunc_set with XDP programs selftests/bpf: utilize string values for delegate_xxx mount options ... ==================== Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.comSigned-off-by:Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.8 The second features pull request for v6.8. A bigger one this time with changes both to stack and drivers. We have a new Wifi band RFI (WBRF) mitigation feature for which we pulled an immutable branch shared with other subsystems. And, as always, other new features and bug fixes all over. Major changes: cfg80211/mac80211 * AMD ACPI based Wifi band RFI (WBRF) mitigation feature * Basic Service Set (BSS) usage reporting * TID to link mapping support * mac80211 hardware flag to disallow puncturing iwlwifi * new debugfs file fw_dbg_clear mt76 * NVMEM EEPROM improvements * mt7996 Extremely High Throughpu (EHT) improvements * mt7996 Wireless Ethernet Dispatcher (WED) support * mt7996 36-bit DMA support ath12k * support one MSI vector * WCN7850: support AP mode * tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits) wifi: mt76: mt7996: Use DECLARE_FLEX_ARRAY() and fix -Warray-bounds warnings wifi: ath11k: workaround too long expansion sparse warnings Revert "wifi: ath12k: use ATH12K_PCI_IRQ_DP_OFFSET for DP IRQ" wifi: rt2x00: remove useless code in rt2x00queue_create_tx_descriptor() wifi: rtw89: only reset BB/RF for existing WiFi 6 chips while starting up wifi: rtw89: add DBCC H2C to notify firmware the status wifi: rtw89: mac: add suffix _ax to MAC functions wifi: rtw89: mac: add flags to check if CMAC and DMAC are enabled wifi: rtw89: 8922a: add power on/off functions wifi: rtw89: add XTAL SI for WiFi 7 chips wifi: rtw89: phy: print out RFK log with formatted string wifi: rtw89: parse and print out RFK log from C2H events wifi: rtw89: add C2H event handlers of RFK log and report wifi: rtw89: load RFK log format string from firmware file wifi: rtw89: fw: add version field to BB MCU firmware element wifi: rtw89: fw: load TX power track tables from fw_element wifi: mwifiex: configure BSSID consistently when starting AP wifi: mwifiex: add extra delay for firmware ready wifi: mac80211: sta_info.c: fix sentence grammar wifi: mac80211: rx.c: fix sentence grammar ... ==================== Link: https://lore.kernel.org/r/20231218163900.C031DC433C9@smtp.kernel.orgSigned-off-by:
-
- 18 Dec, 2023 23 commits
-
-
Andrii Nakryiko authored
It is safe to always start with imprecise SCALAR_VALUE register. Previously __mark_reg_const_zero() relied on caller to reset precise mark, but it's very error prone and we already missed it in a few places. So instead make __mark_reg_const_zero() reset precision always, as it's a safe default for SCALAR_VALUE. Explanation is basically the same as for why we are resetting (or rather not setting) precision in current state. If necessary, precision propagation will set it to precise correctly. As such, also remove a big comment about forward precision propagation in mark_reg_stack_read() and avoid unnecessarily setting precision to true after reading from STACK_ZERO stack. Again, precision propagation will correctly handle this, if that SCALAR_VALUE register will ever be needed to be precise. Reported-by:
Maxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Yonghong Song <yonghong.song@linux.dev> Acked-by:
-
Jakub Kicinski authored
Donald Hunter says: ==================== tools/net/ynl: Add 'sub-message' support to ynl This patchset adds a 'sub-message' attribute type to the netlink-raw schema and implements it in ynl. This provides support for kind-specific options attributes as used in rt_link and tc raw netlink families. A description of the new 'sub-message' attribute type and the corresponding sub-message definitions is provided in patch 3. The patchset includes updates to the rt_link spec and a new tc spec that make use of the new 'sub-message' attribute type. As mentioned in patch 4, encode support is not yet implemented in ynl and support for sub-message selectors at a different nest level from the key attribute is not yet supported. I plan to work on these in follow-up patches. Patches 1 is code cleanup in ynl Patches 2-4 add sub-message support to the schema and ynl with documentation updates. Patch 5 adds binary and pad support to structs in netlink-raw. Patches 6-8 contain specs that use the sub-message attribute type. Patches 9-13 update ynl-gen-rst and its make target ==================== Link: https://lore.kernel.org/r/20231215093720.18774-1-donald.hunter@gmail.comSigned-off-by:
-
Donald Hunter authored
The output from ynl-gen-rst.py has extra indentation that causes extra <blockquote> elements to be generated in the HTML output. Reduce the indentation so that sphinx doesn't generate unnecessary <blockquote> elements. Reviewed-by:
Breno Leitao <leitao@debian.org> Signed-off-by:
Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231215093720.18774-14-donald.hunter@gmail.comSigned-off-by:
-
Donald Hunter authored
The generated .rst for attribute-sets currently uses a sub-sub-heading for each attribute, with the attribute name in bold. This makes attributes stand out more than the attribute-set sub-headings they are part of. Remove the bold markup from attribute sub-sub-headings. Signed-off-by:
-
Donald Hunter authored
The index of netlink specs was being generated unsorted. Sort the output before generating the index entries. Reviewed-by:
-
Donald Hunter authored
Add a section for sub-messages to the generated .rst files. Reviewed-by:
-
Donald Hunter authored
Add ynl-gen-rst.py to the dependencies for the netlink .rst files in the doc Makefile so that the docs get regenerated if the ynl-gen-rst.py script is modified. Use $(Q) to honour V=1 in the rules that run ynl-gen-rst.py Reviewed-by:
-
Donald Hunter authored
This is a work-in-progress spec for tc that covers: - most of the qdiscs - the flower classifier - new, del, get for qdisc, chain, class and filter Notable omissions: - most of the stats attrs are left as binary blobs - notifications are not yet implemented Signed-off-by:
-
Donald Hunter authored
The rt_link spec was using pad1, pad2 attributes in structs which appears in the ynl output. Replace this with the 'pad' type which doesn't pollute the output. Signed-off-by:
-
Donald Hunter authored
Start using sub-message selectors in the rt_link spec for the link-specific 'data' and 'slave-data' attributes. Signed-off-by:
-
Donald Hunter authored
The tc netlink-raw family needs binary and pad types for several qopt C structs. Add support for them to ynl. Reviewed-by:
-
Donald Hunter authored
Implement the 'sub-message' attribute type in ynl. Encode support is not yet implemented. Support for sub-message selectors at a different nest level from the key attribute is not yet supported. Reviewed-by:
-
Donald Hunter authored
Document the spec format used by netlink-raw families like rt and tc. Reviewed-by:
-
Donald Hunter authored
Add a 'sub-message' attribute type with a selector that supports polymorphic attribute formats for raw netlink families like tc. A sub-message attribute uses the value of another attribute as a selector key to choose the right sub-message format. For example if the following attribute has already been decoded: { "kind": "gre" } and we encounter the following attribute spec: - name: data type: sub-message sub-message: linkinfo-data-msg selector: kind Then we look for a sub-message definition called 'linkinfo-data-msg' and use the value of the 'kind' attribute i.e. 'gre' as the key to choose the correct format for the sub-message: sub-messages: name: linkinfo-data-msg formats: - value: bridge attribute-set: linkinfo-bridge-attrs - value: gre attribute-set: linkinfo-gre-attrs - value: geneve attribute-set: linkinfo-geneve-attrs This would decode the attribute value as a sub-message with the attribute-set called 'linkinfo-gre-attrs' as the attribute space. A sub-message can have an optional 'fixed-header' followed by zero or more attributes from an attribute-set. For example the following 'tc-options-msg' sub-message defines message formats that use a mixture of fixed-header, attribute-set or both together: sub-messages: - name: tc-options-msg formats: - value: bfifo fixed-header: tc-fifo-qopt - value: cake attribute-set: tc-cake-attrs - value: netem fixed-header: tc-netem-qopt attribute-set: tc-netem-attrs Reviewed-by: -
Donald Hunter authored
Use expression formatting that conforms to the python style guide. Reviewed-by:
-
Andrii Nakryiko authored
Jiri Olsa says: ==================== bpf: Add check for negative uprobe multi offset hi, adding the check for negative offset for uprobe multi link. v2 changes: - add more failure checks [Alan] - move the offset retrieval/check up in the loop to be done earlier [Song] thanks, jirka --- ==================== Link: https://lore.kernel.org/r/20231217215538.3361991-1-jolsa@kernel.orgSigned-off-by:
-
Jiri Olsa authored
We fail to create uprobe if we pass negative offset. Add more tests validating kernel-side error checking code. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
Song Liu <song@kernel.org> Link: https://lore.kernel.org/bpf/20231217215538.3361991-3-jolsa@kernel.org
-
Jiri Olsa authored
Currently the __uprobe_register will return 0 (success) when called with negative offset. The reason is that the call to register_for_each_vma and then build_map_info won't return error for negative offset. They just won't do anything - no matching vma is found so there's no registered breakpoint for the uprobe. I don't think we can change the behaviour of __uprobe_register and fail for negative uprobe offset, because apps might depend on that already. But I think we can still make the change and check for it on bpf multi link syscall level. Also moving the __get_user call and check for the offsets to the top of loop, to fail early without extra __get_user calls for ref_ctr_offset and cookie arrays. Signed-off-by:
-
Hou Tao authored
When there is bpf_list_head or bpf_rb_root field in map value, the free of map btf and the free of map value may run concurrently and there may be use-after-free problem, so add two test cases to demonstrate it. And the use-after-free problem can been easily reproduced by using bpf_next tree and a KASAN-enabled kernel. The first test case tests the racing between the free of map btf and the free of array map. It constructs the racing by releasing the array map in the end after other ref-counter of map btf has been released. To delay the free of array map and make it be invoked after btf_free_rcu() is invoked, it stresses system_unbound_wq by closing multiple percpu array maps before it closes the array map. The second case tests the racing between the free of map btf and the free of inner map. Beside using the similar method as the first one does, it uses bpf_map_delete_elem() to delete the inner map and to defer the release of inner map after one RCU grace period. The reason for using two skeletons is to prevent the release of outer map and inner map in map_in_map_btf.c interfering the release of bpf map in normal_map_btf.c. Signed-off-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
-
Alexei Starovoitov authored
The func_addr used to be NULL for indirect trampolines used by struct_ops. Now func_addr is a valid function pointer. Hence use BPF_TRAMP_F_INDIRECT flag to detect such condition. Fixes: 2cd3e377 ("x86/cfi,bpf: Fix bpf_struct_ops CFI") Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/bpf/20231216004549.78355-1-alexei.starovoitov@gmail.com
-
David S. Miller authored
Pedro Tammela says: ==================== net: rtnl: introduce rcu_replace_pointer_rtnl Introduce the rcu_replace_pointer_rtnl helper to lockdep check rtnl lock rcu replacements, alongside the already existing helpers. Patch 2 uses the new helper in the rtnl_unregister_* functions. Originally this change was part of the P4TC series, as it's a recurrent pattern there, but since it has a use case in mainline we are pushing it separately. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Pedro Tammela authored
With the introduction of the rcu_replace_pointer_rtnl helper, cleanup the rtnl_unregister_* functions to use the helper instead of open coding it. Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
-
Jamal Hadi Salim authored
Introduce the rcu_replace_pointer_rtnl helper to lockdep check rtnl lock rcu replacements, alongside the already existing helpers. This is a quality of life helper so instead of using: rcu_replace_pointer(rp, p, lockdep_rtnl_is_held()) .. or the open coded.. rtnl_dereference() / rcu_assign_pointer() .. or the lazy check version .. rcu_replace_pointer(rp, p, 1) Use: rcu_replace_pointer_rtnl(rp, p) Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Victor Nogueira <victor@mojatatu.com> Signed-off-by:
-
- 17 Dec, 2023 3 commits
-
-
David S. Miller authored
Christian Marangi says: ==================== net: phy: add PHY package base addr + mmd APIs This small series is required for the upcoming qca807x PHY that will make use of PHY package mmd API and the new implementation with read/write based on base addr. The MMD PHY package patch currently has no use but it will be used in the upcoming patch and it does complete what a PHY package may require in addition to basic read/write to setup global PHY address. (Changelog for all the revision is present in the single patch) ==================== Signed-off-by: -
Christian Marangi authored
Some PHY in PHY package may require to read/write MMD regs to correctly configure the PHY package. Add support for these additional required function in both lock and no lock variant. It's assumed that the entire PHY package is either C22 or C45. We use C22 or C45 way of writing/reading to mmd regs based on the passed phydev whether it's C22 or C45. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
-
Christian Marangi authored
Restructure phy_write_mmd and phy_read_mmd to implement generic helper for direct mdiobus access for mmd and use these helper for phydev user. This is needed in preparation of PHY package API that requires generic access to the mdiobus and are deatched from phydev struct but instead access them based on PHY package base_addr and offsets. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
