- 31 May, 2019 40 commits
-
-
George Hilliard authored
[ Upstream commit d4223e06 ] The buffer descriptor setup loop is correct only if it is setting up at least one bd struct. Besides, there is an error if dma_map_sg() returns 0, which is possible and must be handled. Additionally, remove the BUG_ON() checking sglen, which is unnecessary because we configure DMA with that constraint during init. Signed-off-by:
George Hilliard <thirtythreeforty@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Saeed Mahameed authored
[ Upstream commit ee576ec1 ] Amazingly a mlx5e_tc function is being called from the eswitch layer, which is by itself very terrible! The function was declared locally in eswitch_offloads.c so it could be used there, which caused the following compilation warning, fix that. drivers/.../mlx5/core/en_tc.c:3242:6: [-Werror=missing-prototypes] error: no previous prototype for ‘mlx5e_tc_clean_fdb_peer_flows’ Fixes: 04de7dda ("net/mlx5e: Infrastructure for duplicated offloading of TC flows") Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Pu Wen authored
[ Upstream commit e0ceeae7 ] The Hygon family 18h multi-die processor platform supports 1, 2 or 4-Dies per socket. The topology looks like this: System View (with 1-Die 2-Socket): |------------| ------ ----- SOCKET0 | D0 | | D1 | SOCKET1 ------ ----- System View (with 2-Die 2-socket): -------------------- | -------------|------ | | | | ------------ ------------ SOCKET0 | D1 -- D0 | | D3 -- D2 | SOCKET1 ------------ ------------ System View (with 4-Die 2-Socket) : -------------------- | -------------|------ | | | | ------------ ------------ | D1 -- D0 | | D7 -- D6 | | | \/ | | | | \/ | | SOCKET0 | | /\ | | | | /\ | | SOCKET1 | D2 -- D3 | | D4 -- D5 | ------------ ------------ | | | | ------|------------| | -------------------- Currently phys_proc_id = initial_apicid >> bits calculates the physical processor ID from the initial_apicid by shifting *bits*. However, this does not work for 1-Die and 2-Die 2-socket systems. According to document [1] section 2.1.11.1, the bits is the value of CPUID_Fn80000008_ECX[12:15]. The possible values are 4, 5 or 6 which mean: 4 - 1 die 5 - 2 dies 6 - 3/4 dies. Hygon programs the initial ApicId the same way as AMD. The ApicId is read from CPUID_Fn00000001_EBX (see section 2.1.11.1 of referrence [1]) and the definition is as below (see section 2.1.10.2.1.3 of [1]): ------------------------------------------------- Bit | 6 | 5 4 | 3 | 2 1 0 | |-----------|---------|--------|----------------| IDs | Socket ID | Node ID | CCX ID | Core/Thread ID | ------------------------------------------------- So for 3/4-Die configurations, the bits variable is 6, which is the same as the ApicID definition field. For 1-Die and 2-Die configurations, bits is 4 or 5, which will cause the right shifted result to not be exactly the value of socket ID. However, the socket ID should be obtained from ApicId[6]. To fix the problem and match the ApicID field definition, set the shift bits to 6 for all Hygon family 18h multi-die CPUs. Because AMD doesn't have 2-Socket systems with 1-Die/2-Die processors (see reference [2]), this doesn't need to be changed on the AMD side but only for Hygon. References: [1] https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf [2] https://www.amd.com/en/products/specifications/processors [bp: heavily massage commit message. ] Signed-off-by:
Pu Wen <puwen@hygon.cn> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Lendacky <Thomas.Lendacky@amd.com> Cc: Yazen Ghannam <yazen.ghannam@amd.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/1553355740-19999-1-git-send-email-puwen@hygon.cnSigned-off-by:
-
Sameer Pujar authored
[ Upstream commit f6ed6491 ] adma driver is using pm_clk_*() interface for managing clock resources. With this it is observed that clocks remain ON always. This happens on Tegra devices which use BPMP co-processor to manage clock resources, where clocks are enabled during prepare phase. This is necessary because clocks to BPMP are always blocking. When pm_clk_*() interface is used on such Tegra devices, clock prepare count is not balanced till remove call happens for the driver and hence clocks are seen ON always. Thus this patch replaces pm_clk_*() with devm_clk_*() framework. Suggested-by:
Mohan Kumar D <mkumard@nvidia.com> Reviewed-by:
Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit 099e6cc1 ] Currently incoming ARP Replies, for example via a DHT-PUT message, do not update the timeout for an already existing DAT entry. These ARP Replies are dropped instead. This however defeats the purpose of the DHCPACK snooping, for instance. Right now, a DAT entry in the DHT will be purged every five minutes, likely leading to a mesh-wide ARP Request broadcast after this timeout. Which then recreates the entry. The idea of the DHCPACK snooping is to be able to update an entry before a timeout happens, to avoid ARP Request flooding. This patch fixes this issue by updating a DAT entry on incoming ARP Replies even if a matching DAT entry already exists. While still filtering the ARP Reply towards the soft-interface, to avoid duplicate messages on the client device side. Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Acked-by:
Antonio Quartulli <a@unstable.cc> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 98bbbb76 ] clang correctly points out a code path that would lead to an uninitialized variable use: security/selinux/netlabel.c:310:6: error: variable 'addr' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (ip_hdr(skb)->version == 4) { ^~~~~~~~~~~~~~~~~~~~~~~~~ security/selinux/netlabel.c:322:40: note: uninitialized use occurs here rc = netlbl_conn_setattr(ep->base.sk, addr, &secattr); ^~~~ security/selinux/netlabel.c:310:2: note: remove the 'if' if its condition is always true if (ip_hdr(skb)->version == 4) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ security/selinux/netlabel.c:291:23: note: initialize the variable 'addr' to silence this warning struct sockaddr *addr; ^ = NULL This is probably harmless since we should not see ipv6 packets of CONFIG_IPV6 is disabled, but it's better to rearrange the code so this cannot happen. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> [PM: removed old patchwork link, fixed checkpatch.pl style errors] Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Dave Ertman authored
[ Upstream commit 2ebd4428 ] In the current implementation of ice_reset_subtask, if multiple reset types are set in the pf->state, the most intrusive one is meant to be performed only, but the bits requesting the other types are not being cleared. This would lead to another reset being performed the next time the service task is scheduled. Change the flow of ice_reset_subtask so that all reset request bits in pf->state are cleared, and we still perform the most intrusive of the resets requested. Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Dafna Hirschfeld authored
[ Upstream commit 8eead25c ] The function 'v4l2_m2m_buf_copy_metadata' should be called even if decoding/encoding ends with status VB2_BUF_STATE_ERROR, so that the metadata is copied from the source buffer to the dest buffer. Signed-off-by:
Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit faf5a744 ] clang -Wuninitialized incorrectly sees a variable being used without initialization: drivers/scsi/lpfc/lpfc_nvme.c:2102:37: error: variable 'localport' is uninitialized when used here [-Werror,-Wuninitialized] lport = (struct lpfc_nvme_lport *)localport->private; ^~~~~~~~~ drivers/scsi/lpfc/lpfc_nvme.c:2059:38: note: initialize the variable 'localport' to silence this warning struct nvme_fc_local_port *localport; ^ = NULL 1 error generated. This is clearly in dead code, as the condition leading up to it is always false when CONFIG_NVME_FC is disabled, and the variable is always initialized when nvme_fc_register_localport() got called successfully. Change the preprocessor conditional to the equivalent C construct, which makes the code more readable and gets rid of the warning. Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 608f729c ] Clang -Wuninitialized notices that on is_qla40XX we never allocate any DMA memory in get_fw_boot_info() but attempt to free it anyway: drivers/scsi/qla4xxx/ql4_os.c:5915:7: error: variable 'buf_dma' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (!(val & 0x07)) { ^~~~~~~~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5985:47: note: uninitialized use occurs here dma_free_coherent(&ha->pdev->dev, size, buf, buf_dma); ^~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5915:3: note: remove the 'if' if its condition is always true if (!(val & 0x07)) { ^~~~~~~~~~~~~~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5885:20: note: initialize the variable 'buf_dma' to silence this warning dma_addr_t buf_dma; ^ = 0 Skip the call to dma_free_coherent() here. Fixes: 2a991c21 ("[SCSI] qla4xxx: Boot from SAN support for open-iscsi") Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Anirudh Venkataramanan authored
[ Upstream commit 64a59d05 ] commit 63f545ed ("ice: Add support for adaptive interrupt moderation") was meant to add support for adaptive interrupt moderation but there was an error on my part while formatting the patch, and thus only part of the patch ended up being submitted. This patch rectifies the error by adding the rest of the code. Fixes: 63f545ed ("ice: Add support for adaptive interrupt moderation") Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 8ead7e81 ] If ohci-platform is runtime suspended, we can currently get an "imprecise external abort" on reboot with ohci-platform loaded when PM runtime is implemented for the SoC. Let's fix this by adding PM runtime support to usb_hcd_platform_shutdown. Signed-off-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Ludovic Barre authored
[ Upstream commit a88eceb1 ] This patch adds spi_master_put in release function to drop the controller's refcount. Signed-off-by:
Ludovic Barre <ludovic.barre@st.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Leon Romanovsky authored
[ Upstream commit a4b7013d ] BUG: KASAN: slab-out-of-bounds in rxe_mem_init_user+0x6c1/0x740 [rdma_rxe] Read of size 8 at addr ffff88805c01a608 by task ib_send_bw/573 CPU: 24 PID: 573 Comm: ib_send_bw Not tainted 5.0.0-rc5+ #189 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call Trace: rxe_mem_init_user+0x6c1/0x740 [rdma_rxe] rxe_reg_user_mr+0x9b/0x110 [rdma_rxe] ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs] ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs] rxe_mem_init_user+0x6c1/0x740 [rdma_rxe] rxe_reg_user_mr+0x9b/0x110 [rdma_rxe] ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs] ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs] ib_uverbs_cmd_verbs+0x5f2/0xf20 [ib_uverbs] ib_uverbs_ioctl+0x202/0x310 [ib_uverbs] do_vfs_ioctl+0x193/0x1440 ksys_ioctl+0x3a/0x70 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x13f/0x570 entry_SYSCALL_64_after_hwframe+0x49/0xbe Allocated by task 573: __kasan_kmalloc.constprop.5+0xc1/0xd0 __kmalloc+0x161/0x310 rxe_mem_alloc+0x52/0x470 [rdma_rxe] rxe_mem_init_user+0x113/0x740 [rdma_rxe] rxe_reg_user_mr+0x9b/0x110 [rdma_rxe] ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs] ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs] ib_uverbs_cmd_verbs+0x5f2/0xf20 [ib_uverbs] ib_uverbs_ioctl+0x202/0x310 [ib_uverbs] do_vfs_ioctl+0x193/0x1440 ksys_ioctl+0x3a/0x70 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x13f/0x570 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 0: __kasan_slab_free+0x12e/0x180 kfree+0x10a/0x2c0 rcu_process_callbacks+0xa77/0x1260 __do_softirq+0x2ad/0xacb Test scenario: ib_send_bw -x 1 -d rxe0 -a & ib_send_bw -x 1 -d rxe0 -a localhost Fixes: 8700e3e7 ("Soft RoCE driver") Reported-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Tested-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 76646085 ] Handle potential errors returned from kcalloc(). [ bp: rewrite commit message. ] Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
Neeraj Upadhyay authored
[ Upstream commit b699cce1 ] The rcu_head_after_call_rcu() function reads the rhp->func pointer twice, which can result in a false-positive WARN_ON_ONCE() if the callback were passed to call_rcu() between the two reads. Although racing rcu_head_after_call_rcu() with call_rcu() is to be a dubious use case (the return value is not reliable in that case), intermittent and irreproducible warnings are also quite dubious. This commit therefore uses a single READ_ONCE() to pick up the value of rhp->func once, then tests that value twice, thus guaranteeing consistent processing within rcu_head_after_call_rcu()(). Neverthless, racing rcu_head_after_call_rcu() with call_rcu() is still a dubious use case. Signed-off-by:
Neeraj Upadhyay <neeraju@codeaurora.org> [ paulmck: Add blank line after declaration per checkpatch.pl. ] Signed-off-by:
Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by:
-
Paul E. McKenney authored
[ Upstream commit ad092c02 ] If the specified rcuperf.perf_type is not in the rcu_perf_init() function's perf_ops[] array, rcuperf prints some console messages and then invokes rcu_perf_cleanup() to set state so that a future torture test can run. However, rcu_perf_cleanup() also attempts to end the test that didn't actually start, and in doing so relies on the value of cur_ops, a value that is not particularly relevant in this case. This can result in confusing output or even follow-on failures due to attempts to use facilities that have not been properly initialized. This commit therefore sets the value of cur_ops to NULL in this case and inserts a check near the beginning of rcu_perf_cleanup(), thus avoiding relying on an irrelevant cur_ops value. Signed-off-by:
-
Yazen Ghannam authored
[ Upstream commit 006c0770 ] Linux reads MCG_CAP[Count] to find the number of MCA banks visible to a CPU. Currently, this number is the same for all CPUs and a warning is shown if there is a difference. The number of banks is overwritten with the MCG_CAP[Count] value of each following CPU that boots. According to the Intel SDM and AMD APM, the MCG_CAP[Count] value gives the number of banks that are available to a "processor implementation". The AMD BKDGs/PPRs further clarify that this value is per core. This value has historically been the same for every core in the system, but that is not an architectural requirement. Future AMD systems may have different MCG_CAP[Count] values per core, so the assumption that all CPUs will have the same MCG_CAP[Count] value will no longer be valid. Also, the first CPU to boot will allocate the struct mce_banks[] array using the number of banks based on its MCG_CAP[Count] value. The machine check handler and other functions use the global number of banks to iterate and index into the mce_banks[] array. So it's possible to use an out-of-bounds index on an asymmetric system where a following CPU sees a MCG_CAP[Count] value greater than its predecessors. Thus, allocate the mce_banks[] array to the maximum number of banks. This will avoid the potential out-of-bounds index since the value of mca_cfg.banks is capped to MAX_NR_BANKS. Set the value of mca_cfg.banks equal to the max of the previous value and the value for the current CPU. This way mca_cfg.banks will always represent the max number of banks detected on any CPU in the system. This will ensure that all CPUs will access all the banks that are visible to them. A CPU that can access fewer than the max number of banks will find the registers of the extra banks to be read-as-zero. Furthermore, print the resulting number of MCA banks in use. Do this in mcheck_late_init() so that the final value is printed after all CPUs have been initialized. Finally, get bank count from target CPU when doing injection with mce-inject module. [ bp: Remove out-of-bounds example, passify and cleanup commit message. ] Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by:
-
Paul E. McKenney authored
[ Upstream commit b813afae ] If the specified rcutorture.torture_type is not in the rcu_torture_init() function's torture_ops[] array, rcutorture prints some console messages and then invokes rcu_torture_cleanup() to set state so that a future torture test can run. However, rcu_torture_cleanup() also attempts to end the test that didn't actually start, and in doing so relies on the value of cur_ops, a value that is not particularly relevant in this case. This can result in confusing output or even follow-on failures due to attempts to use facilities that have not been properly initialized. This commit therefore sets the value of cur_ops to NULL in this case and inserts a check near the beginning of rcu_torture_cleanup(), thus avoiding relying on an irrelevant cur_ops value. Reported-by:
kernel test robot <rong.a.chen@intel.com> Signed-off-by:
-
Tony Luck authored
[ Upstream commit f19501aa ] There has been a lurking "TBD" in the machine check poll routine ever since it was first split out from the machine check handler. The potential issue is that the poll routine may have just begun a read from the STATUS register in a machine check bank when the hardware logs an error in that bank and signals a machine check. That race used to be pretty small back when machine checks were broadcast, but the addition of local machine check means that the poll code could continue running and clear the error from the bank before the local machine check handler on another CPU gets around to reading it. Fix the code to be sure to only process errors that need to be processed in the poll code, leaving other logged errors alone for the machine check handler to find and process. [ bp: Massage a bit and flip the "== 0" check to the usual !(..) test. ] Fixes: b79109c3 ("x86, mce: separate correct machine check poller and fatal exception handler") Fixes: ed7290d0 ("x86, mce: implement new status bits") Reported-by:
Ashok Raj <ashok.raj@intel.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Leon Romanovsky authored
[ Upstream commit dc7fe518 ] Attempt to use check_shl_overflow() with inputs of unsigned type produces the following compilation warnings. drivers/infiniband/hw/mlx5/qp.c: In function _set_user_rq_size_: ./include/linux/overflow.h:230:6: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] _s >= 0 && _s < 8 * sizeof(*d) ? _s : 0; \ ^~ drivers/infiniband/hw/mlx5/qp.c:5820:6: note: in expansion of macro _check_shl_overflow_ if (check_shl_overflow(rwq->wqe_count, rwq->wqe_shift, &rwq->buf_size)) ^~~~~~~~~~~~~~~~~~ ./include/linux/overflow.h:232:26: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] (_to_shift != _s || *_d < 0 || _a < 0 || \ ^ drivers/infiniband/hw/mlx5/qp.c:5820:6: note: in expansion of macro _check_shl_overflow_ if (check_shl_overflow(rwq->wqe_count, rwq->wqe_shift, &rwq->buf_size)) ^~~~~~~~~~~~~~~~~~ ./include/linux/overflow.h:232:36: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] (_to_shift != _s || *_d < 0 || _a < 0 || \ ^ drivers/infiniband/hw/mlx5/qp.c:5820:6: note: in expansion of macro _check_shl_overflow_ if (check_shl_overflow(rwq->wqe_count, rwq->wqe_shift,&rwq->buf_size)) ^~~~~~~~~~~~~~~~~~ Fixes: 0c668477 ("overflow.h: Add arithmetic shift helper") Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
George Hilliard authored
[ Upstream commit 7ca8c2c8 ] The module was initializing completions whenever it was going to wait on them, and not when the completion was allocated. This is incorrect according to the completion docs: Calling init_completion() on the same completion object twice is most likely a bug [...] Re-initialization is also unnecessary because the module never uses complete_all(). Fix this by only ever initializing the completion a single time, and log if the completions are not consumed as intended (this is not a fatal problem, but should not go unnoticed). Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 1bbb1c31 ] ipw->attr_memory and ipw->common_memory are assigned with the return value of ioremap. ioremap may fail, but no checks are enforced. The fix inserts the checks to avoid potential NULL pointer dereferences. Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Pankaj Gupta authored
[ Upstream commit 4b0a2c5f ] For regular serial ports we do not initialize value of vtermno variable. A garbage value is assigned for non console ports. The value can be observed as a random integer with [1]. [1] vim /sys/kernel/debug/virtio-ports/vport*p* This patch initialize the value of vtermno for console serial ports to '1' and regular serial ports are initiaized to '0'. Reported-by: siliu@redhat.com Signed-off-by:
Pankaj Gupta <pagupta@redhat.com> Signed-off-by:
-
Thierry Escande authored
[ Upstream commit b49f6d83 ] This patch fixes the error exit path of fastrpc_init_create_process(). If the DMA allocation or the DSP invoke fails the fastrpc_map was freed but not removed from the mapping list leading to a double free once the mapping list is emptied in fastrpc_device_release(). [srinivas kandagatla]: Cleaned up error path labels and reset init mem to NULL after free Fixes: d73f71c7("misc: fastrpc: Add support for create remote init process") Signed-off-by:
Thierry Escande <thierry.escande@linaro.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Srinivas Kandagatla authored
[ Upstream commit 415a0729 ] dma_alloc_coherent buffers could have writes queued in store buffers so commit them before sending buffer to DSP using correct dma barriers. Same with vice-versa. Fixes: c68cfb71 ("misc: fastrpc: Add support for context Invoke method") Signed-off-by:
-
Srinivas Kandagatla authored
[ Upstream commit 80f3afd7 ] While passing address phy address to DSP, take care of the offset calculated from virtual address vma. Fixes: c68cfb71 ("misc: fastrpc: Add support for context Invoke method") Signed-off-by:
-
Chad Dupuis authored
[ Upstream commit c5e06ba2 ] Fixes the following crash as the return was missing from the check if an fcport is offloaded. If we hit this code we continue to try to post an invalid task which can lead to the crash: [30259.616411] [0000:61:00.3]:[qedf_post_io_req:989]:3: Session not offloaded yet. [30259.616413] [0000:61:00.3]:[qedf_upload_connection:1340]:3: Uploading connection port_id=490020. [30259.623769] BUG: unable to handle kernel NULL pointer dereference at 0000000000000198 [30259.631645] IP: [<ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf] [30259.638816] PGD 0 [30259.640841] Oops: 0000 [#1] SMP [30259.644098] Modules linked in: fuse xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables devlink ip6table_filter ip6_tables iptable_filter vfat fat ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib ib_ucm ib_umad dm_service_time skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel rpcrdma sunrpc rdma_ucm ib_uverbs lrw gf128mul ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi qedr(OE) glue_helper ablk_helper cryptd ib_core dm_round_robin joydev pcspkr ipmi_ssif ses enclosure ipmi_si ipmi_devintf ipmi_msghandler mei_me [30259.715529] mei sg hpilo hpwdt shpchp wmi lpc_ich acpi_power_meter dm_multipath ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic uas usb_storage mgag200 qedf(OE) i2c_algo_bit libfcoe drm_kms_helper libfc syscopyarea sysfillrect scsi_transport_fc qede(OE) sysimgblt fb_sys_fops ptp ttm pps_core drm qed(OE) smartpqi crct10dif_pclmul crct10dif_common crc32c_intel i2c_core scsi_transport_sas scsi_tgt dm_mirror dm_region_hash dm_log dm_mod [30259.754237] CPU: 9 PID: 977 Comm: kdmwork-253:7 Kdump: loaded Tainted: G W OE ------------ 3.10.0-862.el7.x86_64 #1 [30259.765664] Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 04/04/2018 [30259.775000] task: ffff8c801efd0000 ti: ffff8c801efd8000 task.ti: ffff8c801efd8000 [30259.782505] RIP: 0010:[<ffffffffc035b1ed>] [<ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf] [30259.792116] RSP: 0018:ffff8c801efdbbb0 EFLAGS: 00010046 [30259.797444] RAX: 0000000000000000 RBX: ffffa7f1450948d8 RCX: ffff8c7fe5bc40c8 [30259.804600] RDX: ffff8c800715b300 RSI: ffffa7f1450948d8 RDI: ffff8c80169c2480 [30259.811755] RBP: ffff8c801efdbc30 R08: 00000000000000ae R09: ffff8c800a314540 [30259.818911] R10: ffff8c7fe5bc40c8 R11: ffff8c801efdb8ae R12: 0000000000000000 [30259.826068] R13: ffff8c800715b300 R14: ffff8c80169c2480 R15: ffff8c8005da28e0 [30259.833223] FS: 0000000000000000(0000) GS:ffff8c803f840000(0000) knlGS:0000000000000000 [30259.841338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [30259.847100] CR2: 0000000000000198 CR3: 000000081242e000 CR4: 00000000007607e0 [30259.854256] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [30259.861412] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [30259.868568] PKRU: 00000000 [30259.871278] Call Trace: [30259.873737] [<ffffffffc035c948>] qedf_post_io_req+0x148/0x680 [qedf] [30259.880201] [<ffffffffc035d070>] qedf_queuecommand+0x1f0/0x240 [qedf] [30259.886749] [<ffffffffa329b050>] scsi_dispatch_cmd+0xb0/0x240 [30259.892600] [<ffffffffa32a45bc>] scsi_request_fn+0x4cc/0x680 [30259.898364] [<ffffffffa3118ad9>] __blk_run_queue+0x39/0x50 [30259.903954] [<ffffffffa3114393>] __elv_add_request+0xd3/0x260 [30259.909805] [<ffffffffa311baf0>] blk_insert_cloned_request+0xf0/0x1b0 [30259.916358] [<ffffffffc010b622>] map_request+0x142/0x220 [dm_mod] [30259.922560] [<ffffffffc010b716>] map_tio_request+0x16/0x40 [dm_mod] [30259.928932] [<ffffffffa2ebb1f5>] kthread_worker_fn+0x85/0x180 [30259.934782] [<ffffffffa2ebb170>] ? kthread_stop+0xf0/0xf0 [30259.940284] [<ffffffffa2ebae31>] kthread+0xd1/0xe0 [30259.945176] [<ffffffffa2ebad60>] ? insert_kthread_work+0x40/0x40 [30259.951290] [<ffffffffa351f61d>] ret_from_fork_nospec_begin+0x7/0x21 [30259.957750] [<ffffffffa2ebad60>] ? insert_kthread_work+0x40/0x40 [30259.963860] Code: fe 41 55 49 89 d5 41 54 53 48 89 f3 48 83 ec 58 4c 8b 67 28 4c 8b 4e 18 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 4c 8b 7e 58 <49> 8b 84 24 98 01 00 00 48 8b 00 f6 80 31 01 00 00 10 0f 85 0b [30259.983372] RIP [<ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf] [30259.990630] RSP <ffff8c801efdbbb0> [30259.994127] CR2: 0000000000000198 Signed-off-by:
Chad Dupuis <cdupuis@marvell.com> Signed-off-by:
Saurav Kashyap <skashyap@marvell.com> Signed-off-by:
-
Artemy Kovalyov authored
[ Upstream commit d623dfd2 ] The InfiniBand Architecture Specification section 10.6.7.2.4 TYPE 2 MEMORY WINDOWS says that if the CI supports the Base Memory Management Extensions defined in this specification, the R_Key format for a Type 2 Memory Window must consist of: * 24 bit index in the most significant bits of the R_Key, which is owned by the CI, and * 8 bit key in the least significant bits of the R_Key, which is owned by the Consumer. This means that the kernel should compare only the index part of a R_Key to determine equality with another R_Key. Fixes: db570d7d ("IB/mlx5: Add ODP support to MW") Signed-off-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 7a8e61f8 ] Several people reported testing failures after setting CLOCK_REALTIME close to the limits of the kernel internal representation in nanoseconds, i.e. year 2262. The failures are exposed in subsequent operations, i.e. when arming timers or when the advancing CLOCK_MONOTONIC makes the calculation of CLOCK_REALTIME overflow into negative space. Now people start to paper over the underlying problem by clamping calculations to the valid range, but that's just wrong because such workarounds will prevent detection of real issues as well. It is reasonable to force an upper bound for the various methods of setting CLOCK_REALTIME. Year 2262 is the absolute upper bound. Assume a maximum uptime of 30 years which is plenty enough even for esoteric embedded systems. That results in an upper bound of year 2232 for setting the time. Once that limit is reached in reality this limit is only a small part of the problem space. But until then this stops people from trying to paper over the problem at the wrong places. Reported-by:
Xiongfeng Wang <wangxiongfeng2@huawei.com> Reported-by:
Hongbo Yao <yaohongbo@huawei.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1903231125480.2157@nanos.tec.linutronix.deSigned-off-by:
-
Laurent Pinchart authored
[ Upstream commit 167e5354 ] The PLL parameters are computed by looping over the range of acceptable M, N and E values, and selecting the combination that produces the output frequency closest to the target. The internal frequency constraints are taken into account by restricting the tested values for the PLL parameters, reducing the search space. The target frequency, however, is only taken into account when computing the post-PLL divider, which can result in a 0 value for the divider when the PLL output frequency being tested is lower than half of the target frequency. Subsequent loops will produce a better set of PLL parameters, but for some of the iterations this can result in a division by 0. Fix it by clamping the divider value. We could instead restrict the E values being tested in the inner loop, but that would require additional calculation that would likely be less efficient as the E parameter can only take three different values. Fixes: c25c0136 ("drm: rcar-du: lvds: D3/E3 support") Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
[ Upstream commit 00d082cc ] On the D3 SoC the LVDS PHY must be enabled in the same register write that enables the LVDS output. Skip writing the LVEN bit independently on that platform, it will be set by the write that sets LVRES. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit fd21b79e ] uuid in add_switch is allocted via kmemdup which can fail. The patch logs the error and cleans up the allocated memory for switch. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 6183d5a5 ] No check is enforced for the return value of kzalloc, which may lead to NULL-pointer dereference. The patch fixes this issue. Signed-off-by:
-
Alexandre Courbot authored
[ Upstream commit 52fafc58 ] Commit 0650a914 ("media: mtk-vcodec: Correct return type for mem2mem buffer helpers") fixed the return types for mem2mem buffer helper functions by changing a few local variables from vb2_buffer to vb2_v4l2_buffer. However, it left a few accesses to vb2_buffer::planes as-is, accidentally turning them into accesses to vb2_v4l2_buffer::planes and resulting in values being read from/written to the wrong place. Fix this by inserting vb2_buf into these accesses so they mimic their original behavior. Fixes: 0650a914 ("media: mtk-vcodec: Correct return type for mem2mem buffer helpers") Signed-off-by:
Alexandre Courbot <acourbot@chromium.org> Reviewed-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit c2999c28 ] Since the following commit: 38ac0287 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB") efifb_probe() checks its memory range via efi_mem_desc_lookup(), and this leads to a spurious error message: EFI_MEMMAP is not enabled at every boot on KVM. This is quite annoying since the error message appears even if you set "quiet" boot option. Since this happens on legacy boot, which strangely enough exposes a EFI framebuffer via screen_info, let's double check that we are doing an EFI boot before attempting to access the EFI memory map. Reported-by:
Takashi Iwai <tiwai@suse.de> Tested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190328193429.21373-3-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ezequiel Garcia authored
[ Upstream commit 9b9ea7c2 ] In order to prevent ISOC URBs from being infinitely resubmitted, the driver's USB disconnect handler must kill all the in-flight URBs. While here, change the URB packet status message to a debug level, to avoid spamming the console too much. This commit fixes a lockup caused by an interrupt storm coming from the URB completion handler. Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 9c2ccc32 ] Smatch marks skb->data as untrusted so it warns that "evt_hdr->dlen" can copy up to 255 bytes and we only have room for two bytes. Even if this comes from the firmware and we trust it, the new policy generally is just to fix it as kernel hardenning. I can't test this code so I tried to be very conservative. I considered not allowing "evt_hdr->dlen == 1" because it doesn't initialize the whole variable but in the end I decided to allow it and manually initialized "asic_id" and "asic_ver" to zero. Fixes: e8454ff7 ("[media] drivers:media:radio: wl128x: FM Driver Common sources") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit aeb0d0f5 ] devm_kcalloc may fail and return a null pointer. The fix returns -ENOMEM upon failures to avoid null pointer dereferences. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Tetsuo Handa authored
[ Upstream commit c03a0fd0 ] syzbot is hitting use-after-free bug in uinput module [1]. This is because kobject_uevent(KOBJ_REMOVE) is called again due to commit 0f4dafc0 ("Kobject: auto-cleanup on final unref") after memory allocation fault injection made kobject_uevent(KOBJ_REMOVE) from device_del() from input_unregister_device() fail, while uinput_destroy_device() is expecting that kobject_uevent(KOBJ_REMOVE) is not called after device_del() from input_unregister_device() completed. That commit intended to catch cases where nobody even attempted to send "remove" uevents. But there is no guarantee that an event will ultimately be sent. We are at the point of no return as far as the rest of the kernel is concerned; there are no repeats or do-overs. Also, it is not clear whether some subsystem depends on that commit. If no subsystem depends on that commit, it will be better to remove the state_{add,remove}_uevent_sent logic. But we don't want to risk a regression (in a patch which will be backported) by trying to remove that logic. Therefore, as a first step, let's avoid the use-after-free bug by making sure that kobject_uevent(KOBJ_REMOVE) won't be triggered twice. [1] https://syzkaller.appspot.com/bug?id=8b17c134fe938bbddd75a45afaa9e68af43a362dReported-by:
syzbot <syzbot+f648cfb7e0b52bf7ae32@syzkaller.appspotmail.com> Analyzed-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Fixes: 0f4dafc0 ("Kobject: auto-cleanup on final unref") Cc: Kay Sievers <kay@vrfy.org> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
