Patch from Marc Singer

This patch aligns the lh7a40x port with the updated structure of IDE
drivers.  It also removes an unused FIQ handler.  This patch is made
in order to get the lh7a40x port to build.

Patch from Catalin Marinas

This patch replaces the -mshort-load-bytes option with $(call
check_gcc,-malignment-traps,-mshort-load-bytes) in the CFLAGS
setting in arch/arm/Makefile.

CONFIG_SERIAL_8250_MANY_PORTS should not be set for these boards, as
they only have 2 serial ports.
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

With 'len' being unsigned now, we must make sure it never tries
to go negative...

Thanks: griffon26@kfk4ever.com (Maurice van der Pot)
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Eliminates costly atomic bitops in do_sparc64_fault.
Signed-off-by: David S. Miller <davem@redhat.com>

It is bogus, plus it breaks the build with
CONFIG_SWAP disabled.

Based upon a patch from Ben Collins (bcollins@debian.org)
Signed-off-by: David S. Miller <davem@redhat.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into dwmw2.baythorne.internal:/inst/bk/mtd-2.6

Patch from Jun Sun.
Signed-Off-By: David Woodhouse <dwmw2@infradead.org>

- Add Millennium Plus support.
- Add advanced probe configuration options
- Fix abuse of buffer space in scan for Media Header.

Define callback wrapper function mtd_erase_callback() to handle 
partition offsets during the callback, rather than attempting to 
fix them up in the freed erase_info structure after the callback 
has already happened.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Mathieu LESNIAK <maverick@eskuel.net>


This patch corrects a problem with Netgear FA311
ethernet card (a cheap one). Without it, the MAC address is byte swapped
ie :
HWaddr 02:00:07:E3:E9:F5
instead of :
HWaddr 00:02:E3:07:F5:E9

(the correct MAC address vendor code for Netgear/LiteOn is 00:02:E3)
Signed-off-by: Andrew Morton <akpm@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>

The following patch adds a couple of missing byteswaps and allows the
Atmel wireless driver to work in WEP mode on big-endian CPUs. (tested
on powerPC).

* We are not correctly reporting supported bit rates.
* Fix it.

* Change the "version" OID to what it should be.
* Fix memory leaks - mgt_get_request always returns
* allocated memory for non-int OIDS (with an exception -
* keep reading). If the caller checks the return and itself
* returns, then it must free memory.
* However, it is possible to return from mgt_get_request
* early (!priv->mib). In this case, weird things can happen
* in isl_ioctl. Quick fix, at least to force an oops, is
* to set the union value to NULL. The real fix is to
* recode all mgt_get_request calls in isl_ioctl.

* We are handing back HANDLED even though the IRQ is not for us.
  We also change device state.
  This is plainly wrong.
  AFAICT we also need to take the spin lock early.
  Tested/running on UP/SMP for about a week now.
  (Discovered on one of my lappies that had the X driver on the same IRQ)
  (Proposed on Prism54 Devel with no objections)

* It seems that Viro patched prism54 with the following patch set :
http://www.kernel.org/pub/linux/kernel/v2.6/testing/cset/
cset-viro@www.linux.org.uk[torvalds]|ChangeSet|20040727040034|54764.txt

* I do not see any indication in any mailing list of this.
  It would be nice if we could be informed of such changes :-)

* (Changes committed to our CVS)

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Investigation of why the build is failing due to bogus detection of
undefined symbols: We're getting this warning:

arch/i386/kernel/irq.c
{standard input}: Assembler messages:
{standard input}:3565: Warning: setting incorrect section type for
.bss.page_aligned

Which comes from this code in the 4k stacks code:

static char softirq_stack[NR_CPUS * THREAD_SIZE]  __attribute__((__aligned__(THREAD_SIZE), __section__(".bss.page_aligned")));
static char hardirq_stack[NR_CPUS * THREAD_SIZE]  __attribute__((__aligned__(THREAD_SIZE), __section__(".bss.page_aligned")));

Removing the __section__() fixes it, as does moving to gcc 3.2 or 3.3,
but gcc 2.95 and 3.0 still exhibit the problem.  It seems the 4k stack
developers like newer compilers than I do :) 

The gcc 2.95 section declaration looks like this:
	.section        .bss.page_aligned,"aw",@progbits
while the 3.1 section looks like this:
	.section        .bss.page_aligned,"aw",@nobits

It's definitely a bug that's been fixed:
http://sources.redhat.com/ml/binutils/2002-10/msg00507.html

I've been told that I can fix it with a carefully crafted assembly file and
maybe a change to the linker script, but all that it buys us is a little
space in the uncompressed kernel image.  Plus, the warning will still be
there at compile-time.  

I say, put them back in plain old BSS. 
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Without this patch, mainline via-rhine cannot wake the chip if some other
driver puts it to D3. The problem has hit quite a few people already.

This is a fix for the heisenbug with via-rhine refusing to work
sometimes. Patch "[9/9] Restructure reset code" contained a change made
necessary by patch [8/9]. Mainline merged [8/9] for 2.6.8 and is still
missing the fix, while -mm got it with [9/9].

Jesper Juhl provided crucial test data when no one else was able to
reproduce the symptoms.
Signed-off-by: Roger Luethi <rl@hellgate.ch>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This is used by some IBM vscsi driver. It was using schedule_work(), but
should be using the block layer queue.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into kernel.bkbits.net:/home/davem/sparc-2.6

into kernel.bkbits.net:/home/davem/net-2.6

- VISEntry clobbers %g3, so have to do %asi stuff
  after we invoke it.
- Need to or in 0x10 to TLB flush addresses when
  flushing in secondary context
- Context register restore using wrong address register
- Spitfire not so tolerant of membar in delay slot.
Signed-off-by: David S. Miller <davem@redhat.com>

This allows the VFS layer to the update rather than the
low-level drivers. 

Use the proper "pointer to pos" that is passed down instead.