The remaining ghash implementation does not support aggregation, and so
there is no point in including the precomputed powers of H in the key
struct. So move that into the GCM setkey routine, and get rid of the
shared sub-routine entirely.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

There are two ways to implement SIMD accelerated GCM on arm64:
- using the PMULL instructions for carryless 64x64->128 multiplication,
  in which case the architecture guarantees that the AES instructions are
  available as well, and so we can use the AEAD implementation that combines
  both,
- using the PMULL instructions for carryless 8x8->16 bit multiplication,
  which is implemented as a shash, and can be combined with any ctr(aes)
  implementation by the generic GCM AEAD template driver.

So let's drop the 64x64->128 shash driver, which is never needed for GCM,
and not suitable for use anywhere else.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If users don't specify NUMA node, the driver will use the ZIP module near
the CPU allocating acomp. Otherwise, it uses the ZIP module according to
the requirement of users.

Cc: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For a Linux server with NUMA, there are possibly multiple (de)compressors
which are either local or remote to some NUMA node. Some drivers will
automatically use the (de)compressor near the CPU calling acomp_alloc().
However, it is not necessarily correct because users who send acomp_req
could be from different NUMA node with the CPU which allocates acomp.

Just like kernel has kmalloc() and kmalloc_node(), here crypto can have
same support.

Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When building with LLVM_IAS=1 means using Clang's Integrated Assembly (IAS)
from LLVM/Clang >= v10.0.1-rc1+ instead of GNU/as from GNU/binutils
I see the following breakage in Debian/testing AMD64:

<instantiation>:15:74: error: too many positional arguments
 PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
                                                                         ^
 arch/x86/crypto/aesni-intel_asm.S:1598:2: note: while in macro instantiation
 GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp)
 ^
<instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix
 GHASH_4_ENCRYPT_4_PARALLEL_dec %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc
 ^
arch/x86/crypto/aesni-intel_asm.S:1599:2: note: while in macro instantiation
 GCM_ENC_DEC dec
 ^
<instantiation>:15:74: error: too many positional arguments
 PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
                                                                         ^
arch/x86/crypto/aesni-intel_asm.S:1686:2: note: while in macro instantiation
 GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp)
 ^
<instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix
 GHASH_4_ENCRYPT_4_PARALLEL_enc %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc
 ^
arch/x86/crypto/aesni-intel_asm.S:1687:2: note: while in macro instantiation
 GCM_ENC_DEC enc

Craig Topper suggested me in ClangBuiltLinux issue #1050:

> I think the "too many positional arguments" is because the parser isn't able
> to handle the trailing commas.
>
> The "unknown use of instruction mnemonic" is because the macro was named
> GHASH_4_ENCRYPT_4_PARALLEL_DEC but its being instantiated with
> GHASH_4_ENCRYPT_4_PARALLEL_dec I guess gas ignores case on the
> macro instantiation, but llvm doesn't.

First, I removed the trailing comma in the PRECOMPUTE line.

Second, I substituted:
1. GHASH_4_ENCRYPT_4_PARALLEL_DEC -> GHASH_4_ENCRYPT_4_PARALLEL_dec
2. GHASH_4_ENCRYPT_4_PARALLEL_ENC -> GHASH_4_ENCRYPT_4_PARALLEL_enc

With these changes I was able to build with LLVM_IAS=1 and boot on bare metal.

I confirmed that this works with Linux-kernel v5.7.5 final.

NOTE: This patch is on top of Linux v5.7 final.

Thanks to Craig and especially Nick for double-checking and his comments.
Suggested-by: Craig Topper <craig.topper@intel.com>
Suggested-by: Craig Topper <craig.topper@gmail.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: "ClangBuiltLinux" <clang-built-linux@googlegroups.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1050
Link: https://bugs.llvm.org/show_bug.cgi?id=24494Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes a number of endianness marking issues in the ccp
driver.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some user-space programs rely on crypto requests that have no
control metadata.  This broke when a check was added to require
the presence of control metadata with the ctx->init flag.

This patch fixes the regression by setting ctx->init as long as
one sendmsg(2) has been made, with or without a control message.
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: f3c802a1 ("crypto: algif_aead - Only wake up when...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

features[] and id_table[] are not modified and can be made const to
allow the compiler to put them in read-only memory.

Before:
   text    data     bss     dec     hex filename
  11534    2056     160   13750    35b6 drivers/crypto/virtio/virtio_crypto_core.o

After:
   text    data     bss     dec     hex filename
  11630    1992     128   13750    35b6 drivers/crypto/virtio/virtio_crypto_core.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

id_table[] is not modified and an be made const to allow the compiler to
put it in read-only memory.

Before:
   text    data     bss     dec     hex filename
   1746     192       8    1946     79a drivers/char/hw_random/virtio-rng.o

After:
   text    data     bss     dec     hex filename
   1762     176       8    1946     79a drivers/char/hw_random/virtio-rng.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

nmk_rng_ids[] is not modified and can be made const to allow the
compiler to put it in read-only memory.

Before:
   text    data     bss     dec     hex filename
    652     216       4     872     368 drivers/char/hw_random/nomadik-rng.o

After:
   text    data     bss     dec     hex filename
    676     192       4     872     368 drivers/char/hw_random/nomadik-rng.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

bcm2835_rng_devtype[] is not modified and can be made const to allow the
compiler to put it in read-only memory.

Before:
   text    data     bss     dec     hex filename
   2392     176       0    2568     a08 drivers/char/hw_random/bcm2835-rng.o

After:
   text    data     bss     dec     hex filename
   2464     104       0    2568     a08 drivers/char/hw_random/bcm2835-rng.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As HW_RANDOM_BA431 does not have any platform dependency, it should not
default to enabled.

Fixes: 0289e9be ("hwrng: ba431 - add support for BA431 hwrng")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The ba431 driver depends on HAS_IOMEM and this was missing from
the Kconfig file.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 0289e9be ("hwrng: ba431 - add support for BA431 hwrng")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Forward requests to another provider if the key length for AES-XTS is
192 bits as this is not supported by the QAT accelerators.

This fixes the following issue reported with the option
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS:

  alg: skcipher: qat_aes_xts setkey failed on test vector "random: len=3204 klen=48"; expected_error=0, actual_error=-22, flags=0x1
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove tfm field in qat_alg_skcipher_ctx structure.
This is not used.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Validate AES-XTS key using the function xts_verify_key() to prevent
malformed keys.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Allow AES-XTS requests that are not multiple of the block size.
If a request is smaller than the block size, return -EINVAL.

This fixes the following issue reported by the crypto testmgr self-test:

  alg: skcipher: qat_aes_xts encryption failed on test vector "random: len=116 klen=64"; expected_error=0, actual_error=-22, cfg="random: inplace may_sleep use_finup src_divs=[<reimport>45.85%@+4077, <flush>54.15%@alignmask+18]"

Fixes: 96ee111a ("crypto: qat - return error for block...")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes a bunch of sparse warnings by adding __force tags
when casting __iomem poitners to u64.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes an unused variable warning when this driver is
built-in with CONFIG_OF=n.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes an unused variable warning when this driver is
built-in with CONFIG_OF=n.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes an unused variable warning when this driver is
built with CONFIG_OF=n.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes an unused variable warning when this driver is
built-in with CONFIG_OF=n.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes an unused variable warning when this driver is
built-in with CONFIG_OF=n.  While we're at it this patch also
expands the compiler coverage when CONFIG_OF is off by removing
all the CONFIG_OF ifdefs.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes an unused variable warning when this driver is
built-in with CONFIG_OF=n.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The change on the ux500 branch is needed by the regulator API.

A recent change to the Regulator consumer API (which this driver
utilises) add prototypes for the some suspend functions.  These
functions require including header file include/linux/suspend.h.

The following tree of includes affecting this driver will be
present:

   In file included from include/linux/elevator.h:6,
                    from include/linux/blkdev.h:288,
                    from include/linux/blk-cgroup.h:23,
                    from include/linux/writeback.h:14,
                    from include/linux/memcontrol.h:22,
                    from include/linux/swap.h:9,
                    from include/linux/suspend.h:5,
                    from include/linux/regulator/consumer.h:35,
                    from drivers/crypto/ux500/hash/hash_core.c:28:

include/linux/elevator.h pulls in include/linux/hashtable.h which
contains its own version of hash_init().  This confuses the build
system and results in the following error (amongst others):

 drivers/crypto/ux500/hash/hash_core.c:1362:19: error: passing argument 1 of '__hash_init' from incompatible pointer type [-Werror=incompatible-pointer-types]
 1362 |  return hash_init(req);

Fix this by namespacing the local hash_init() such that the
source of confusion is removed.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add John Allen as a new CCP driver maintainer. Additionally, break out
the driver SEV support and create a new maintainer entry, with Brijesh
Singh and Tom Lendacky as maintainers.

Cc: John Allen <john.allen@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: John Allen <john.allen@amd.com>
Acked-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes all the sparse warnings in the octeontx driver.
Some of these are just trivial type changes.

However, some of the changes are non-trivial on little-endian hosts.
Obviously the driver appears to be broken on either LE or BE as it
was doing different things.  I've taken the BE behaviour as the
correct one.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

PASID is defined as "int" although it's a 20-bit value and shouldn't be
negative int. To be consistent with PASID type in iommu, define PASID
as "u32".
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Clang's integrated assembler complains "invalid reassignment of
non-absolute variable 'var_ddq_add'" while assembling
arch/x86/crypto/aes_ctrby8_avx-x86_64.S. It was because var_ddq_add was
reassigned with non-absolute values several times, which IAS did not
support. We can avoid the reassignment by replacing the uses of
var_ddq_add with its definitions accordingly to have compatilibility
with IAS.

Link: https://github.com/ClangBuiltLinux/linux/issues/1008Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Reported-by: Fangrui Song <maskray@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # build+boot Linux v5.7.5; clang v11.0.0-git
Signed-off-by: Jian Cai <caij2003@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Running the crypto manager self tests with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS may result in several types of errors
when using the ccp-crypto driver:

alg: skcipher: cbc-des3-ccp encryption failed on test vector 0; expected_error=0, actual_error=-5 ...

alg: skcipher: ctr-aes-ccp decryption overran dst buffer on test vector 0 ...

alg: ahash: sha224-ccp test failed (wrong result) on test vector ...

These errors are the result of improper processing of scatterlists mapped
for DMA.

Given a scatterlist in which entries are merged as part of mapping the
scatterlist for DMA, the DMA length of a merged entry will reflect the
combined length of the entries that were merged. The subsequent
scatterlist entry will contain DMA information for the scatterlist entry
after the last merged entry, but the non-DMA information will be that of
the first merged entry.

The ccp driver does not take this scatterlist merging into account. To
address this, add a second scatterlist pointer to track the current
position in the DMA mapped representation of the scatterlist. Both the DMA
representation and the original representation of the scatterlist must be
tracked as while most of the driver can use just the DMA representation,
scatterlist_map_and_copy() must use the original representation and
expects the scatterlist pointer to be accurate to the original
representation.

In order to properly walk the original scatterlist, the scatterlist must
be walked until the combined lengths of the entries seen is equal to the
DMA length of the current entry being processed in the DMA mapped
representation.

Fixes: 63b94509 ("crypto: ccp - CCP device driver and interface support")
Signed-off-by: John Allen <john.allen@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Crypto test driver's test_ahash_speed calls crypto_ahash_update and
crypto_ahash_final APIs repeatedly for all the available test vector
buffer lengths.

if we mark the end for scatterlist based on the current vector size then
the subsequent vectors might fail if the later buffer lengths are higher.

To avoid this, in qce do not mark the end of scatterlist in update API,
the qce_ahash_async_req_handle API already takes care of this copying
right amount of buffer from the request scatter list.
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto testmgr deliberately corrupts the request context while passing
vectors to the import. This is to make sure that drivers do not rely on
request but they take all the necessary input from io vec passed to it.

qce casts the request context from request parameter, since it is corrupted
the sub squent hash request fails and qce hangs.

To avoid this re-initialize request context on import. The qce import
API alreasy takes care of taking the input vectors from passed io vec.
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto test module passes zero length vectors as test input to sha-1 and
sha-256. To provide correct output for these vectors, hash zero support
has been added as in other crypto drivers.
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a corresponding decrement is
needed on the error handling path to keep the counter balanced.

Fix this by adding the missed function call.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove yet another unused field left over from times gone by.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The ESSIV support in ccree was added before the kernel
generic support and using a slightly different API.

Brings the ccree essiv interface into compliance with
kernel crypto api one.

Since CryptoCell only support 256 bit AES key for ESSIV,
also use a fallback if requested a smaller key size.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Libo Wang <libo.wang@arm.com>
Cc: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix a small resource leak on the error path of cipher processing.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Fixes: 63ee04c8 ("crypto: ccree - add skcipher support")
Cc: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

ahash_finup_no_ctx() returns -ENOMEM in most error cases,
and this is fine for almost all of them.

However, the return code provided by dpaa2_caam_enqueue()
(e.g. -EIO or -EBUSY) shouldn't be overridden by -ENOMEM.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The variable err is being initialized with a value that is never read
and it is being updated later with a new value.  The initialization is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>