Commits · 951d13328a8a366a3bc2f9321636ee09e6f61c99 · Kirill Smelkov / linux

18 Apr, 2019 40 commits

crypto: testmgr - identify test vectors by name rather than number · 951d1332

Eric Biggers authored Apr 11, 2019

In preparation for fuzz testing algorithms against their generic
implementation, make error messages in testmgr identify test vectors by
name rather than index.  Built-in test vectors are simply "named" by
their index in testmgr.h, as before.  But (in later patches) generated
test vectors will be given more descriptive names to help developers
debug problems detected with them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

951d1332

crypto: testmgr - expand ability to test for errors · 5283a8ee

Eric Biggers authored Apr 11, 2019

Update testmgr to support testing for specific errors from setkey() and
digest() for hashes; setkey() and encrypt()/decrypt() for skciphers and
ciphers; and setkey(), setauthsize(), and encrypt()/decrypt() for AEADs.
This is useful because algorithms usually restrict the lengths or format
of the message, key, and/or authentication tag in some way.  And bad
inputs should be tested too, not just good inputs.

As part of this change, remove the ambiguously-named 'fail' flag and
replace it with 'setkey_error = -EINVAL' for the only test vector that
used it -- the DES weak key test vector.  Note that this tightens the
test to require -EINVAL rather than any error code, but AFAICS this
won't cause any test failure.

Other than that, these new fields aren't set on any test vectors yet.
Later patches will do so.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

5283a8ee

integrity: support EC-RDSA signatures for asymmetric_verify · be08f0c6

Vitaly Chikunov authored Apr 11, 2019

Allow to use EC-RDSA signatures for IMA by determining signature type by
the hash algorithm name. This works good for EC-RDSA since Streebog and
EC-RDSA should always be used together.

Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: linux-integrity@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

be08f0c6

crypto: ecrdsa - add EC-RDSA test vectors to testmgr · 32fbdbd3

Vitaly Chikunov authored Apr 11, 2019

Add testmgr test vectors for EC-RDSA algorithm for every of five
supported parameters (curves). Because there are no officially published
test vectors for the curves, the vectors are generated by gost-engine.
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

32fbdbd3

crypto: ecrdsa - add EC-RDSA (GOST 34.10) algorithm · 0d7a7864

Vitaly Chikunov authored Apr 11, 2019

Add Elliptic Curve Russian Digital Signature Algorithm (GOST R
34.10-2012, RFC 7091, ISO/IEC 14888-3) is one of the Russian (and since
2018 the CIS countries) cryptographic standard algorithms (called GOST
algorithms). Only signature verification is supported, with intent to be
used in the IMA.

Summary of the changes:

* crypto/Kconfig:
  - EC-RDSA is added into Public-key cryptography section.

* crypto/Makefile:
  - ecrdsa objects are added.

* crypto/asymmetric_keys/x509_cert_parser.c:
  - Recognize EC-RDSA and Streebog OIDs.

* include/linux/oid_registry.h:
  - EC-RDSA OIDs are added to the enum. Also, a two currently not
    implemented curve OIDs are added for possible extension later (to
    not change numbering and grouping).

* crypto/ecc.c:
  - Kenneth MacKay copyright date is updated to 2014, because
    vli_mmod_slow, ecc_point_add, ecc_point_mult_shamir are based on his
    code from micro-ecc.
  - Functions needed for ecrdsa are EXPORT_SYMBOL'ed.
  - New functions:
    vli_is_negative - helper to determine sign of vli;
    vli_from_be64 - unpack big-endian array into vli (used for
      a signature);
    vli_from_le64 - unpack little-endian array into vli (used for
      a public key);
    vli_uadd, vli_usub - add/sub u64 value to/from vli (used for
      increment/decrement);
    mul_64_64 - optimized to use __int128 where appropriate, this speeds
      up point multiplication (and as a consequence signature
      verification) by the factor of 1.5-2;
    vli_umult - multiply vli by a small value (speeds up point
      multiplication by another factor of 1.5-2, depending on vli sizes);
    vli_mmod_special - module reduction for some form of Pseudo-Mersenne
      primes (used for the curves A);
    vli_mmod_special2 - module reduction for another form of
      Pseudo-Mersenne primes (used for the curves B);
    vli_mmod_barrett - module reduction using pre-computed value (used
      for the curve C);
    vli_mmod_slow - more general module reduction which is much slower
     (used when the modulus is subgroup order);
    vli_mod_mult_slow - modular multiplication;
    ecc_point_add - add two points;
    ecc_point_mult_shamir - add two points multiplied by scalars in one
      combined multiplication (this gives speed up by another factor 2 in
      compare to two separate multiplications).
    ecc_is_pubkey_valid_partial - additional samity check is added.
  - Updated vli_mmod_fast with non-strict heuristic to call optimal
      module reduction function depending on the prime value;
  - All computations for the previously defined (two NIST) curves should
    not unaffected.

* crypto/ecc.h:
  - Newly exported functions are documented.

* crypto/ecrdsa_defs.h
  - Five curves are defined.

* crypto/ecrdsa.c:
  - Signature verification is implemented.

* crypto/ecrdsa_params.asn1, crypto/ecrdsa_pub_key.asn1:
  - Templates for BER decoder for EC-RDSA parameters and public key.

Cc: linux-integrity@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

0d7a7864

crypto: ecc - make ecc into separate module · 4a2289da

Vitaly Chikunov authored Apr 11, 2019

ecc.c have algorithms that could be used togeter by ecdh and ecrdsa.
Make it separate module. Add CRYPTO_ECC into Kconfig. EXPORT_SYMBOL and
document to what seems appropriate. Move structs ecc_point and ecc_curve
from ecc_curve_defs.h into ecc.h.

No code changes.
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

4a2289da

crypto: Kconfig - create Public-key cryptography section · 3d6228a5

Vitaly Chikunov authored Apr 11, 2019

Group RSA, DH, and ECDH into Public-key cryptography config section.
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

3d6228a5

X.509: parse public key parameters from x509 for akcipher · f1774cb8

Vitaly Chikunov authored Apr 11, 2019

Some public key algorithms (like EC-DSA) keep in parameters field
important data such as digest and curve OIDs (possibly more for
different EC-DSA variants). Thus, just setting a public key (as
for RSA) is not enough.

Append parameters into the key stream for akcipher_set_{pub,priv}_key.
Appended data is: (u32) algo OID, (u32) parameters length, parameters
data.

This does not affect current akcipher API nor RSA ciphers (they could
ignore it). Idea of appending parameters to the key stream is by Herbert
Xu.

Cc: David Howells <dhowells@redhat.com>
Cc: Denis Kenzior <denkenz@gmail.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

f1774cb8

KEYS: do not kmemdup digest in {public,tpm}_key_verify_signature · 83bc0299

Vitaly Chikunov authored Apr 11, 2019

Treat (struct public_key_signature)'s digest same as its signature (s).
Since digest should be already in the kmalloc'd memory do not kmemdup
digest value before calling {public,tpm}_key_verify_signature.

Patch is split from the previous as suggested by Herbert Xu.
Suggested-by: David Howells <dhowells@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

83bc0299

crypto: akcipher - new verify API for public key algorithms · c7381b01

Vitaly Chikunov authored Apr 11, 2019

Previous akcipher .verify() just `decrypts' (using RSA encrypt which is
using public key) signature to uncover message hash, which was then
compared in upper level public_key_verify_signature() with the expected
hash value, which itself was never passed into verify().

This approach was incompatible with EC-DSA family of algorithms,
because, to verify a signature EC-DSA algorithm also needs a hash value
as input; then it's used (together with a signature divided into halves
`r||s') to produce a witness value, which is then compared with `r' to
determine if the signature is correct. Thus, for EC-DSA, nor
requirements of .verify() itself, nor its output expectations in
public_key_verify_signature() wasn't sufficient.

Make improved .verify() call which gets hash value as input and produce
complete signature check without any output besides status.

Now for the top level verification only crypto_akcipher_verify() needs
to be called and its return value inspected.

Make sure that `digest' is in kmalloc'd memory (in place of `output`) in
{public,tpm}_key_verify_signature() as insisted by Herbert Xu, and will
be changed in the following commit.

Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

c7381b01

crypto: rsa - unimplement sign/verify for raw RSA backends · 3ecc9725

Vitaly Chikunov authored Apr 11, 2019

In preparation for new akcipher verify call remove sign/verify callbacks
from RSA backends and make PKCS1 driver call encrypt/decrypt instead.

This also complies with the well-known idea that raw RSA should never be
used for sign/verify. It only should be used with proper padding scheme
such as PKCS1 driver provides.

Cc: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Cc: qat-linux@intel.com
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

3ecc9725

crypto: akcipher - default implementations for request callbacks · 78a0324f

Vitaly Chikunov authored Apr 11, 2019

Because with the introduction of EC-RDSA and change in workings of RSA
in regard to sign/verify, akcipher could have not all callbacks defined,
check the presence of callbacks in crypto_register_akcipher() and
provide default implementation if the callback is not implemented.

This is suggested by Herbert Xu instead of checking the presence of the
callback on every request.
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

78a0324f