Pull more drm updates from Dave Airlie:
 "Looks like I missed a tegra feature request for next, but should still
  be fine since it's pretty self contained.

  Apart from that got a set of i915 and amdgpu fixes as per usual along
  with a few misc fixes.

  tegra:
   - Tegra186 hardware cursor support
   - better capability reporting for different SoC
   - better framebuffer modifier support
   - host1x fixes

  ttm:
   - fix unswappable BO handling

  efifb:
   - check for PCI before using it

  amdgpu:
   - Fixes for Aldebaran
   - Display LTTPR fixes
   - eDP fixes
   - Fixes for Vangogh
   - RAS fixes
   - ASPM support
   - Renoir SMU fixes
   - Modifier fixes
   - Misc code cleanups
   - Freesync fixes

  i915:
   - Several fixes to GLK handling in recent display refactoring
   - Rare watchdog timer race fix
   - Cppcheck redundant condition fix
   - Overlay error code propagation fix
   - Documentation fix
   - gvt: Remove one unused function warning
   - gvt: Fix intel_gvt_init_device() return type
   - gvt: Remove one duplicated register accessible check"

* tag 'drm-next-2021-04-30' of git://anongit.freedesktop.org/drm/drm: (111 commits)
  efifb: Check efifb_pci_dev before using it
  drm/i915: Fix docbook descriptions for i915_gem_shrinker
  drm/i915: fix an error code in intel_overlay_do_put_image()
  drm/i915/display/psr: Fix cppcheck warnings
  drm/i915: Disable LTTPR detection on GLK once again
  drm/i915: Restore lost glk ccs w/a
  drm/i915: Restore lost glk FBC 16bpp w/a
  drm/i915: Take request reference before arming the watchdog timer
  drm/ttm: fix error handling if no BO can be swapped out v4
  drm/i915/gvt: Remove duplicated register accessible check
  drm/amdgpu/gmc9: remove dummy read workaround for newer chips
  drm/amdgpu: Add mem sync flag for IB allocated by SA
  drm/amdgpu: Fix SDMA RAS error reporting on Aldebaran
  drm/amdgpu: Reset RAS error count and status regs
  Revert "drm/amdgpu: workaround the TMR MC address issue (v2)"
  drm/amd/display: 3.2.132
  drm/amd/display: [FW Promotion] Release 0.0.62
  drm/amd/display: add helper for enabling mst stream features
  drm/amd/display: Report Proper Quantization Range in AVI Infoframe
  drm/amd/display: Fix call to pass bpp in 16ths of a bit
  ...

Pull module updates from Jessica Yu:
 "Fix an age old bug involving jump_calls and static_labels when
  CONFIG_MODULE_UNLOAD=n.

  When CONFIG_MODULE_UNLOAD=n, it means you can't unload modules, so
  normally the __exit sections of a module are not loaded at all.
  However, dynamic code patching (jump_label, static_call, alternatives)
  can have sites in __exit sections even if __exit is never executed.

  Reported by Peter Zijlstra:
     'Alternatives, jump_labels and static_call all can have relocations
      into __exit code. Not loading it at all would be BAD.'

  Therefore, load the __exit sections even when CONFIG_MODULE_UNLOAD=n,
  and discard them after init"

* tag 'modules-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: treat exit sections the same as init sections when !CONFIG_MODULE_UNLOAD

Pull powerpc updates from Michael Ellerman:

 - Enable KFENCE for 32-bit.

 - Implement EBPF for 32-bit.

 - Convert 32-bit to do interrupt entry/exit in C.

 - Convert 64-bit BookE to do interrupt entry/exit in C.

 - Changes to our signal handling code to use user_access_begin/end()
   more extensively.

 - Add support for time namespaces (CONFIG_TIME_NS)

 - A series of fixes that allow us to reenable STRICT_KERNEL_RWX.

 - Other smaller features, fixes & cleanups.

Thanks to Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le
Goater, Chen Huang, Chris Packham, Christophe Leroy, Christopher M.
Riedl, Colin Ian King, Dan Carpenter, Daniel Axtens, Daniel Henrique
Barboza, David Gibson, Davidlohr Bueso, Denis Efremov, dingsenjie,
Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren
Myneni, He Ying, Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee
Jones, Leonardo Bras, Li Huafei, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Nathan Chancellor, Nathan Lynch, Nicholas Piggin,
Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi Bangoria,
Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen
Rothwell, Thadeu Lima de Souza Cascardo, Thomas Gleixner, Tony Ambardar,
Tyrel Datwyler, Vaibhav Jain, Vincenzo Frascino, Xiongwei Song, Yang Li,
Yu Kuai, and Zhang Yunkai.

* tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (302 commits)
  powerpc/signal32: Fix erroneous SIGSEGV on RT signal return
  powerpc: Avoid clang uninitialized warning in __get_user_size_allowed
  powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe
  powerpc/kvm: Fix build error when PPC_MEM_KEYS/PPC_PSERIES=n
  powerpc/kasan: Fix shadow start address with modules
  powerpc/kernel/iommu: Use largepool as a last resort when !largealloc
  powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs
  powerpc/44x: fix spelling mistake in Kconfig "varients" -> "variants"
  powerpc/iommu: Annotate nested lock for lockdep
  powerpc/iommu: Do not immediately panic when failed IOMMU table allocation
  powerpc/iommu: Allocate it_map by vmalloc
  selftests/powerpc: remove unneeded semicolon
  powerpc/64s: remove unneeded semicolon
  powerpc/eeh: remove unneeded semicolon
  powerpc/selftests: Add selftest to test concurrent perf/ptrace events
  powerpc/selftests/perf-hwbreak: Add testcases for 2nd DAWR
  powerpc/selftests/perf-hwbreak: Coalesce event creation code
  powerpc/selftests/ptrace-hwbreak: Add testcases for 2nd DAWR
  powerpc/configs: Add IBMVNIC to some 64-bit configs
  selftests/powerpc: Add uaccess flush test
  ...

Pull Xtensa updates from Max Filippov:

 - switch to generic syscall generation scripts

 - new GDBIO implementation for xtensa semihosting interface

 - various small code fixes and cleanups

 - a few typo fixes in comments and Kconfig help text

* tag 'xtensa-20210429' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: ISS: add GDBIO implementation to semihosting interface
  xtensa: ISS: split simcall implementation from semihosting interface
  xtensa: simcall.h: Change compitible to compatible
  xtensa: Couple of typo fixes
  xtensa: drop extraneous register load from initialize_mmu
  xtensa: fix pgprot_noncached assumptions
  xtensa: simplify coherent_kvaddr logic
  xtensa: syscalls: switch to generic syscallhdr.sh
  xtensa: syscalls: switch to generic syscalltbl.sh
  xtensa: stop filling syscall array with sys_ni_syscall
  xtensa: remove unneeded export in boot-elf/Makefile
  xtensa: move CONFIG_CPU_*_ENDIAN defines to Kconfig
  xtensa: fix warning comparing pointer to 0
  xtensa: fix spelling mistake in Kconfig "wont" -> "won't"

Merge tag 'drm-intel-next-fixes-2021-04-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 fixes for v5.13-rc1:
- Several fixes to GLK handling in recent display refactoring (Ville)
- Rare watchdog timer race fix (Tvrtko)
- Cppcheck redundant condition fix (José)
- Overlay error code propagation fix (Dan Carpenter)
- Documentation fix (Maarten)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/871raw5d3g.fsf@intel.com

Merge tag 'amd-drm-next-5.13-2021-04-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.13-2021-04-23:

amdgpu:
- Fixes for Aldebaran
- Display LTTPR fixes
- eDP fixes
- Fixes for Vangogh
- RAS fixes
- ASPM support
- Renoir SMU fixes
- Modifier fixes
- Misc code cleanups
- Freesync fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423223920.3786-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-fixes-2021-04-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Two patches in drm-misc-next-fixes this week, one to fix the error
handling in TTM when a BO can't be swapped out and one to prevent a
wrong dereference in efifb.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429090308.k3fuqvenf6vupfmg@gilmour

drm/tegra: Changes for v5.13-rc1

The changes this time around contain a couple of fixes for host1x along
with some improvements for Tegra DRM. Most notably the Tegra DRM driver
now supports the hardware cursor on Tegra186 and later, more correctly
reflects the capabilities of the display pipelines on various Tegra SoC
generations and knows how to deal with the dGPU sector layout by using
framebuffer modifiers.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401164430.3349105-1-thierry.reding@gmail.com

Pull Kconfig updates from Masahiro Yamada:

 - Change 'option defconfig' to the environment variable
   KCONFIG_DEFCONFIG_LIST

 - Refactor tinyconfig without using allnoconfig_y

 - Remove 'option allnoconfig_y' syntax

 - Change 'option modules' to 'modules'

 - Do not use /boot/config-* etc. as base config for cross-compilation

 - Fix a search bug in nconf

 - Various code cleanups

* tag 'kconfig-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kconfig: refactor .gitignore
  kconfig: highlight xconfig 'comment' lines with '***'
  kconfig: highlight gconfig 'comment' lines with '***'
  kconfig: gconf: remove unused code
  kconfig: remove unused PACKAGE definition
  kconfig: nconf: stop endless search loops
  kconfig: split menu.c out of parser.y
  kconfig: nconf: refactor in print_in_middle()
  kconfig: nconf: remove meaningless wattrset() call from show_menu()
  kconfig: nconf: change set_config_filename() to void function
  kconfig: nconf: refactor attributes setup code
  kconfig: nconf: remove unneeded default for menu prompt
  kconfig: nconf: get rid of (void) casts from wattrset() calls
  kconfig: nconf: fix NORMAL attributes
  kconfig: mconf,nconf: remove unneeded '\0' termination after snprintf()
  kconfig: use /boot/config-* etc. as DEFCONFIG_LIST only for native build
  kconfig: change sym_change_count to a boolean flag
  kconfig: nconf: fix core dump when searching in empty menu
  kconfig: lxdialog: A spello fix and a punctuation added
  kconfig: streamline_config.pl: Couple of typo fixes
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Evaluate $(call cc-option,...) etc. only for build targets

 - Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux

 - Remove unnecessary --gcc-toolchains Clang flag because the --prefix
   flag finds the toolchains

 - Do not pass Clang's --prefix flag when using the integrated as

 - Check the assembler version in Kconfig time

 - Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up
   some dependencies in Kconfig

 - Fix invalid Module.symvers creation when building only modules
   without vmlinux

 - Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is
   set, but there is no module to build

 - Refactor module installation Makefile

 - Support zstd for module compression

 - Convert alpha and ia64 to use generic shell scripts to generate the
   syscall headers

 - Add a new elfnote to indicate if the kernel was built with LTO, which
   will be used by pahole

 - Flatten the directory structure under include/config/ so CONFIG
   options and filenames match

 - Change the deb source package name from linux-$(KERNELRELEASE) to
   linux-upstream

* tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (42 commits)
  kbuild: Add $(KBUILD_HOSTLDFLAGS) to 'has_libelf' test
  kbuild: deb-pkg: change the source package name to linux-upstream
  tools: do not include scripts/Kbuild.include
  kbuild: redo fake deps at include/config/*.h
  kbuild: remove TMPO from try-run
  MAINTAINERS: add pattern for dummy-tools
  kbuild: add an elfnote for whether vmlinux is built with lto
  ia64: syscalls: switch to generic syscallhdr.sh
  ia64: syscalls: switch to generic syscalltbl.sh
  alpha: syscalls: switch to generic syscallhdr.sh
  alpha: syscalls: switch to generic syscalltbl.sh
  sysctl: use min() helper for namecmp()
  kbuild: add support for zstd compressed modules
  kbuild: remove CONFIG_MODULE_COMPRESS
  kbuild: merge scripts/Makefile.modsign to scripts/Makefile.modinst
  kbuild: move module strip/compression code into scripts/Makefile.modinst
  kbuild: refactor scripts/Makefile.modinst
  kbuild: rename extmod-prefix to extmod_prefix
  kbuild: check module name conflict for external modules as well
  kbuild: show the target directory for depmod log
  ...

Pull networking updates from Jakub Kicinski:
 "Core:

   - bpf:
        - allow bpf programs calling kernel functions (initially to
          reuse TCP congestion control implementations)
        - enable task local storage for tracing programs - remove the
          need to store per-task state in hash maps, and allow tracing
          programs access to task local storage previously added for
          BPF_LSM
        - add bpf_for_each_map_elem() helper, allowing programs to walk
          all map elements in a more robust and easier to verify fashion
        - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
          redirection
        - lpm: add support for batched ops in LPM trie
        - add BTF_KIND_FLOAT support - mostly to allow use of BTF on
          s390 which has floats in its headers files
        - improve BPF syscall documentation and extend the use of kdoc
          parsing scripts we already employ for bpf-helpers
        - libbpf, bpftool: support static linking of BPF ELF files
        - improve support for encapsulation of L2 packets

   - xdp: restructure redirect actions to avoid a runtime lookup,
     improving performance by 4-8% in microbenchmarks

   - xsk: build skb by page (aka generic zerocopy xmit) - improve
     performance of software AF_XDP path by 33% for devices which don't
     need headers in the linear skb part (e.g. virtio)

   - nexthop: resilient next-hop groups - improve path stability on
     next-hops group changes (incl. offload for mlxsw)

   - ipv6: segment routing: add support for IPv4 decapsulation

   - icmp: add support for RFC 8335 extended PROBE messages

   - inet: use bigger hash table for IP ID generation

   - tcp: deal better with delayed TX completions - make sure we don't
     give up on fast TCP retransmissions only because driver is slow in
     reporting that it completed transmitting the original

   - tcp: reorder tcp_congestion_ops for better cache locality

   - mptcp:
        - add sockopt support for common TCP options
        - add support for common TCP msg flags
        - include multiple address ids in RM_ADDR
        - add reset option support for resetting one subflow

   - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
     co-existence with UDP tunnel GRO, allowing the first to take place
     correctly even for encapsulated UDP traffic

   - micro-optimize dev_gro_receive() and flow dissection, avoid
     retpoline overhead on VLAN and TEB GRO

   - use less memory for sysctls, add a new sysctl type, to allow using
     u8 instead of "int" and "long" and shrink networking sysctls

   - veth: allow GRO without XDP - this allows aggregating UDP packets
     before handing them off to routing, bridge, OvS, etc.

   - allow specifing ifindex when device is moved to another namespace

   - netfilter:
        - nft_socket: add support for cgroupsv2
        - nftables: add catch-all set element - special element used to
          define a default action in case normal lookup missed
        - use net_generic infra in many modules to avoid allocating
          per-ns memory unnecessarily

   - xps: improve the xps handling to avoid potential out-of-bound
     accesses and use-after-free when XPS change race with other
     re-configuration under traffic

   - add a config knob to turn off per-cpu netdev refcnt to catch
     underflows in testing

  Device APIs:

   - add WWAN subsystem to organize the WWAN interfaces better and
     hopefully start driving towards more unified and vendor-
     independent APIs

   - ethtool:
        - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
          support)
        - allow network drivers to dump arbitrary SFP EEPROM data,
          current offset+length API was a poor fit for modern SFP which
          define EEPROM in terms of pages (incl. mlx5 support)

   - act_police, flow_offload: add support for packet-per-second
     policing (incl. offload for nfp)

   - psample: add additional metadata attributes like transit delay for
     packets sampled from switch HW (and corresponding egress and
     policy-based sampling in the mlxsw driver)

   - dsa: improve support for sandwiched LAGs with bridge and DSA

   - netfilter:
        - flowtable: use direct xmit in topologies with IP forwarding,
          bridging, vlans etc.
        - nftables: counter hardware offload support

   - Bluetooth:
        - improvements for firmware download w/ Intel devices
        - add support for reading AOSP vendor capabilities
        - add support for virtio transport driver

   - mac80211:
        - allow concurrent monitor iface and ethernet rx decap
        - set priority and queue mapping for injected frames

   - phy: add support for Clause-45 PHY Loopback

   - pci/iov: add sysfs MSI-X vector assignment interface to distribute
     MSI-X resources to VFs (incl. mlx5 support)

  New hardware/drivers:

   - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
     Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
     interfaces.

   - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
     BCM63xx switches

   - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

   - ath11k: support for QCN9074 a 802.11ax device

   - Bluetooth: Broadcom BCM4330 and BMC4334

   - phy: Marvell 88X2222 transceiver support

   - mdio: add BCM6368 MDIO mux bus controller

   - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

   - mana: driver for Microsoft Azure Network Adapter (MANA)

   - Actions Semi Owl Ethernet MAC

   - can: driver for ETAS ES58X CAN/USB interfaces

  Pure driver changes:

   - add XDP support to: enetc, igc, stmmac

   - add AF_XDP support to: stmmac

   - virtio:
        - page_to_skb() use build_skb when there's sufficient tailroom
          (21% improvement for 1000B UDP frames)
        - support XDP even without dedicated Tx queues - share the Tx
          queues with the stack when necessary

   - mlx5:
        - flow rules: add support for mirroring with conntrack, matching
          on ICMP, GTP, flex filters and more
        - support packet sampling with flow offloads
        - persist uplink representor netdev across eswitch mode changes
        - allow coexistence of CQE compression and HW time-stamping
        - add ethtool extended link error state reporting

   - ice, iavf: support flow filters, UDP Segmentation Offload

   - dpaa2-switch:
        - move the driver out of staging
        - add spanning tree (STP) support
        - add rx copybreak support
        - add tc flower hardware offload on ingress traffic

   - ionic:
        - implement Rx page reuse
        - support HW PTP time-stamping

   - octeon: support TC hardware offloads - flower matching on ingress
     and egress ratelimitting.

   - stmmac:
        - add RX frame steering based on VLAN priority in tc flower
        - support frame preemption (FPE)
        - intel: add cross time-stamping freq difference adjustment

   - ocelot:
        - support forwarding of MRP frames in HW
        - support multiple bridges
        - support PTP Sync one-step timestamping

   - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
     learning, flooding etc.

   - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
     SC7280 SoCs)

   - mt7601u: enable TDLS support

   - mt76:
        - add support for 802.3 rx frames (mt7915/mt7615)
        - mt7915 flash pre-calibration support
        - mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
  net: selftest: fix build issue if INET is disabled
  net: netrom: nr_in: Remove redundant assignment to ns
  net: tun: Remove redundant assignment to ret
  net: phy: marvell: add downshift support for M88E1240
  net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
  net/sched: act_ct: Remove redundant ct get and check
  icmp: standardize naming of RFC 8335 PROBE constants
  bpf, selftests: Update array map tests for per-cpu batched ops
  bpf: Add batched ops support for percpu array
  bpf: Implement formatted output helpers with bstr_printf
  seq_file: Add a seq_bprintf function
  sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
  net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
  net: fix a concurrency bug in l2tp_tunnel_register()
  net/smc: Remove redundant assignment to rc
  mpls: Remove redundant assignment to err
  llc2: Remove redundant assignment to rc
  net/tls: Remove redundant initialization of record
  rds: Remove redundant assignment to nr_sig
  dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
  ...

Pull x86 tlb updates from Ingo Molnar:
 "The x86 MM changes in this cycle were:

   - Implement concurrent TLB flushes, which overlaps the local TLB
     flush with the remote TLB flush.

     In testing this improved sysbench performance measurably by a
     couple of percentage points, especially if TLB-heavy security
     mitigations are active.

   - Further micro-optimizations to improve the performance of TLB
     flushes"

* tag 'x86-mm-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smp: Micro-optimize smp_call_function_many_cond()
  smp: Inline on_each_cpu_cond() and on_each_cpu()
  x86/mm/tlb: Remove unnecessary uses of the inline keyword
  cpumask: Mark functions as pure
  x86/mm/tlb: Do not make is_lazy dirty for no reason
  x86/mm/tlb: Privatize cpu_tlbstate
  x86/mm/tlb: Flush remote and local TLBs concurrently
  x86/mm/tlb: Open-code on_each_cpu_cond_mask() for tlb_is_not_lazy()
  x86/mm/tlb: Unify flush_tlb_func_local() and flush_tlb_func_remote()
  smp: Run functions concurrently in smp_call_function_many_cond()

Pull Microblaze updates from Michal Simek:
 "No new features, just about cleaning up some code and moving to
  generic syscall solution used by other architectures:

   - Switch to generic syscall scripts

   - Some small fixes"

* tag 'microblaze-v5.13' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: add 'fallthrough' to memcpy/memset/memmove
  microblaze: Fix a typo
  microblaze: tag highmem_setup() with __meminit
  microblaze: syscalls: switch to generic syscallhdr.sh
  microblaze: syscalls: switch to generic syscalltbl.sh

Pull MIPS updates from Thomas Bogendoerfer:

 - removed get_fs/set_fs

 - removed broken/unmaintained MIPS KVM trap and emulate support

 - added support for Loongson-2K1000

 - fixes and cleanups

* tag 'mips_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (107 commits)
  MIPS: BCM63XX: Use BUG_ON instead of condition followed by BUG.
  MIPS: select ARCH_KEEP_MEMBLOCK unconditionally
  mips: Do not include hi and lo in clobber list for R6
  MIPS:DTS:Correct the license for Loongson-2K
  MIPS:DTS:Fix label name and interrupt number of ohci for Loongson-2K
  MIPS: Avoid handcoded DIVU in `__div64_32' altogether
  lib/math/test_div64: Correct the spelling of "dividend"
  lib/math/test_div64: Fix error message formatting
  mips/bootinfo:correct some comments of fw_arg
  MIPS: Avoid DIVU in `__div64_32' is result would be zero
  MIPS: Reinstate platform `__div64_32' handler
  div64: Correct inline documentation for `do_div'
  lib/math: Add a `do_div' test module
  MIPS: Makefile: Replace -pg with CC_FLAGS_FTRACE
  MIPS: pci-legacy: revert "use generic pci_enable_resources"
  MIPS: Loongson64: Add kexec/kdump support
  MIPS: pci-legacy: use generic pci_enable_resources
  MIPS: pci-legacy: remove busn_resource field
  MIPS: pci-legacy: remove redundant info messages
  MIPS: pci-legacy: stop using of_pci_range_to_resource
  ...

Pull fsnotify updates from Jan Kara:

 - support for limited fanotify functionality for unpriviledged users

 - faster merging of fanotify events

 - a few smaller fsnotify improvements

* tag 'fsnotify_for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  shmem: allow reporting fanotify events with file handles on tmpfs
  fs: introduce a wrapper uuid_to_fsid()
  fanotify_user: use upper_32_bits() to verify mask
  fanotify: support limited functionality for unprivileged users
  fanotify: configurable limits via sysfs
  fanotify: limit number of event merge attempts
  fsnotify: use hash table for faster events merge
  fanotify: mix event info and pid into merge key hash
  fanotify: reduce event objectid to 29-bit hash
  fsnotify: allow fsnotify_{peek,remove}_first_event with empty queue

Pull quota, ext2, reiserfs updates from Jan Kara:

 - support for path (instead of device) based quotactl syscall
   (quotactl_path(2))

 - ext2 conversion to kmap_local()

 - other minor cleanups & fixes

* tag 'for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fs/reiserfs/journal.c: delete useless variables
  fs/ext2: Replace kmap() with kmap_local_page()
  ext2: Match up ext2_put_page() with ext2_dotdot() and ext2_find_entry()
  fs/ext2/: fix misspellings using codespell tool
  quota: report warning limits for realtime space quotas
  quota: wire up quotactl_path
  quota: Add mountpath based quota support

Pull xfs updates from Darrick Wong:
 "The notable user-visible addition this cycle is ability to remove
  space from the last AG in a filesystem. This is the first of many
  changes needed for full-fledged support for shrinking a filesystem.
  Still needed are (a) the ability to reorganize files and metadata away
  from the end of the fs; (b) the ability to remove entire allocation
  groups; (c) shrink support for realtime volumes; and (d) thorough
  testing of (a-c).

  There are a number of performance improvements in this code drop: Dave
  streamlined various parts of the buffer logging code and reduced the
  cost of various debugging checks, and added the ability to pre-create
  the xattr structures while creating files. Brian eliminated
  transaction reservations that were being held across writeback (thus
  reducing livelock potential.

  Other random pieces: Pavel fixed the repetitve warnings about
  deprecated mount options, I fixed online fsck to behave itself when a
  readonly remount comes in during scrub, and refactored various other
  parts of that code, Christoph contributed a lot of refactoring this
  cycle. The xfs_icdinode structure has been absorbed into the (incore)
  xfs_inode structure, and the format and flags handling around
  xfs_inode_fork structures has been simplified. Chandan provided a
  number of fixes for extent count overflow related problems that have
  been shaken out by debugging knobs added during 5.12.

  Summary:

   - Various minor fixes in online scrub.

   - Prevent metadata files from being automatically inactivated.

   - Validate btree heights by the computed per-btree limits.

   - Don't warn about remounting with deprecated mount options.

   - Initialize attr forks at create time if we suspect we're going to
     need to store them.

   - Reduce memory reallocation workouts in the logging code.

   - Fix some theoretical math calculation errors in logged buffers that
     span multiple discontig memory ranges but contiguous ondisk
     regions.

   - Speedups in dirty buffer bitmap handling.

   - Make type verifier functions more inline-happy to reduce overhead.

   - Reduce debug overhead in directory checking code.

   - Many many typo fixes.

   - Begin to handle the permanent loss of the very end of a filesystem.

   - Fold struct xfs_icdinode into xfs_inode.

   - Deprecate the long defunct BMV_IF_NO_DMAPI_READ from the bmapx
     ioctl.

   - Remove a broken directory block format check from online scrub.

   - Fix a bug where we could produce an unnecessarily tall data fork
     btree when creating an attr fork.

   - Fix scrub and readonly remounts racing.

   - Fix a writeback ioend log deadlock problem by dropping the behavior
     where we could preallocate a setfilesize transaction.

   - Fix some bugs in the new extent count checking code.

   - Fix some bugs in the attr fork preallocation code.

   - Refactor if_flags out of the incore inode fork data structure"

* tag 'xfs-5.13-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (77 commits)
  xfs: remove xfs_quiesce_attr declaration
  xfs: remove XFS_IFEXTENTS
  xfs: remove XFS_IFINLINE
  xfs: remove XFS_IFBROOT
  xfs: only look at the fork format in xfs_idestroy_fork
  xfs: simplify xfs_attr_remove_args
  xfs: rename and simplify xfs_bmap_one_block
  xfs: move the XFS_IFEXTENTS check into xfs_iread_extents
  xfs: drop unnecessary setfilesize helper
  xfs: drop unused ioend private merge and setfilesize code
  xfs: open code ioend needs workqueue helper
  xfs: drop submit side trans alloc for append ioends
  xfs: fix return of uninitialized value in variable error
  xfs: get rid of the ip parameter to xchk_setup_*
  xfs: fix scrub and remount-ro protection when running scrub
  xfs: move the check for post-EOF mappings into xfs_can_free_eofblocks
  xfs: move the xfs_can_free_eofblocks call under the IOLOCK
  xfs: precalculate default inode attribute offset
  xfs: default attr fork size does not handle device inodes
  xfs: inode fork allocation depends on XFS_IFEXTENT flag
  ...

Pull gfs2 updates from Andreas Gruenbacher:

 - Fix some compiler and kernel-doc warnings

 - Various minor cleanups and optimizations

 - Add a new sysfs gfs2 status file with some filesystem wide
   information

* tag 'gfs2-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix fall-through warnings for Clang
  gfs2: Fix a number of kernel-doc warnings
  gfs2: Make gfs2_setattr_simple static
  gfs2: Add new sysfs file for gfs2 status
  gfs2: Silence possible null pointer dereference warning
  gfs2: Turn gfs2_meta_indirect_buffer into gfs2_meta_buffer
  gfs2: Replace gfs2_lblk_to_dblk with gfs2_get_extent
  gfs2: Turn gfs2_extent_map into gfs2_{get,alloc}_extent
  gfs2: Add new gfs2_iomap_get helper
  gfs2: Remove unused variable sb_format
  gfs2: Fix dir.c function parameter descriptions
  gfs2: Eliminate gh parameter from go_xmote_bh func
  gfs2: don't create empty buffers for NO_CREATE

Pull exfat updates from Namjae Jeon:

 - Improve write performance with dirsync mount option

 - Improve lookup performance

 - Add support for FITRIM ioctl

 - Fix a bug with discard option

* tag 'exfat-for-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: speed up iterate/lookup by fixing start point of traversing cluster chain
  exfat: improve write performance when dirsync enabled
  exfat: add support ioctl and FITRIM function
  exfat: introduce bitmap_lock for cluster bitmap access
  exfat: fix erroneous discard when clear cluster bit

Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, target, tcmu,
  smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx).

  The major core change is using a sbitmap instead of an atomic for
  queue tracking"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits)
  scsi: target: tcm_fc: Fix a kernel-doc header
  scsi: target: Shorten ALUA error messages
  scsi: target: Fix two format specifiers
  scsi: target: Compare explicitly with SAM_STAT_GOOD
  scsi: sd: Introduce a new local variable in sd_check_events()
  scsi: dc395x: Open-code status_byte(u8) calls
  scsi: 53c700: Open-code status_byte(u8) calls
  scsi: smartpqi: Remove unused functions
  scsi: qla4xxx: Remove an unused function
  scsi: myrs: Remove unused functions
  scsi: myrb: Remove unused functions
  scsi: mpt3sas: Fix two kernel-doc headers
  scsi: fcoe: Suppress a compiler warning
  scsi: libfc: Fix a format specifier
  scsi: aacraid: Remove an unused function
  scsi: core: Introduce enum scsi_disposition
  scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case
  scsi: core: Rename scsi_softirq_done() into scsi_complete()
  scsi: core: Remove an incorrect comment
  scsi: core: Make the scsi_alloc_sgtables() documentation more accurate
  ...

Pull VFIO updates from Alex Williamson:

 - Embed struct vfio_device into vfio driver structures (Jason
   Gunthorpe)

 - Make vfio_mdev type safe (Jason Gunthorpe)

 - Remove vfio-pci NVLink2 extensions for POWER9 (Christoph Hellwig)

 - Update vfio-pci IGD extensions for OpRegion 2.1+ (Fred Gao)

 - Various spelling/blank line fixes (Zhen Lei, Zhou Wang, Bhaskar
   Chowdhury)

 - Simplify unpin_pages error handling (Shenming Lu)

 - Fix i915 mdev Kconfig dependency (Arnd Bergmann)

 - Remove unused structure member (Keqian Zhu)

* tag 'vfio-v5.13-rc1' of git://github.com/awilliam/linux-vfio: (43 commits)
  vfio/gvt: fix DRM_I915_GVT dependency on VFIO_MDEV
  vfio/iommu_type1: Remove unused pinned_page_dirty_scope in vfio_iommu
  vfio/mdev: Correct the function signatures for the mdev_type_attributes
  vfio/mdev: Remove kobj from mdev_parent_ops->create()
  vfio/gvt: Use mdev_get_type_group_id()
  vfio/gvt: Make DRM_I915_GVT depend on VFIO_MDEV
  vfio/mbochs: Use mdev_get_type_group_id()
  vfio/mdpy: Use mdev_get_type_group_id()
  vfio/mtty: Use mdev_get_type_group_id()
  vfio/mdev: Add mdev/mtype_get_type_group_id()
  vfio/mdev: Remove duplicate storage of parent in mdev_device
  vfio/mdev: Add missing error handling to dev_set_name()
  vfio/mdev: Reorganize mdev_device_create()
  vfio/mdev: Add missing reference counting to mdev_type
  vfio/mdev: Expose mdev_get/put_parent to mdev_private.h
  vfio/mdev: Use struct mdev_type in struct mdev_device
  vfio/mdev: Simplify driver registration
  vfio/mdev: Add missing typesafety around mdev_device
  vfio/mdev: Do not allow a mdev_type to have a NULL parent pointer
  vfio/mdev: Fix missing static's on MDEV_TYPE_ATTR's
  ...

Pull clk updates from Stephen Boyd:
 "Here's a collection of largely clk driver updates. The usual suspects
  are here: i.MX, Qualcomm, Renesas, Allwinner, Samsung, and Rockchip,
  but it feels pretty light on commits.

  There's only one real commit to the framework core and that's to
  consolidate code. Otherwise the diffstat is dominated by many Qualcomm
  clk driver patches that modernize the driver for the proper way of
  speciying clk parents. That's shifting data around, which could subtly
  break things so I'll be on the lookout for fixes.

  New Drivers:
   - Proper clk driver for Mediatek MT7621 SoCs
   - Support for the clock controller on the new Rockchip rk3568

  Updates:
   - Simplify Zynq Kconfig dependencies
   - Use clk_hw pointers in socfpga driver
   - Cleanup parent data in qcom clk drivers
   - Some cleanups for rk3399 modularization
   - Fix reparenting of i.MX UART clocks by initializing only the ones
     associated to stdout
   - Correct the PCIE clocks for i.MX8MP and i.MX8MQ
   - Make i.MX LPCG and SCU clocks return on registering failure
   - Kernel doc fixes
   - Add DAB hardware accelerator clocks on Renesas R-Car E3 and M3-N
   - Add timer (TMU) clocks on Renesas R-Car H3 ES1.0
   - Add Timer (TMU & CMT) and thermal sensor (TSC) clocks on
     Renesas R-Car V3U
   - Sigma-delta modulation on Allwinner V3s audio PLL"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (82 commits)
  MAINTAINERS: add MT7621 CLOCK maintainer
  staging: mt7621-dts: use valid vendor 'mediatek' instead of invalid 'mtk'
  staging: mt7621-dts: make use of new 'mt7621-clk'
  clk: ralink: add clock driver for mt7621 SoC
  clk: uniphier: Fix potential infinite loop
  clk: qcom: rpmh: add support for SDX55 rpmh IPA clock
  clk: qcom: gcc-sdm845: get rid of the test clock
  clk: qcom: convert SDM845 Global Clock Controller to parent_data
  dt-bindings: clock: separate SDM845 GCC clock bindings
  clk: qcom: apss-ipq-pll: Add missing MODULE_DEVICE_TABLE
  clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLE
  clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE
  dt: bindings: add mt7621-sysc device tree binding documentation
  dt-bindings: clock: add dt binding header for mt7621 clocks
  clk: samsung: Remove redundant dev_err calls
  clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable
  clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback
  clk: zynqmp: Drop dependency on ARCH_ZYNQMP
  clk: zynqmp: Enable the driver if ZYNQMP_FIRMWARE is selected
  clk: qcom: gcc-sm8350: use ARRAY_SIZE instead of specifying num_parents
  ...

Pull mailbox updates from Jassi Brar:
 "qcom:
   - enable support for SM8350 and SC7280

  sprd:
   - refcount channel usage
   - specify interrupt names in dt
   - support sc9863a

  arm:
   - drop redundant print

  ti:
   - convert dt-bindings to json schema

  and misc spelling fixes"

* tag 'mailbox-v5.13' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt-bindings: mailbox: qcom-ipcc: Add compatible for SC7280
  dt-bindings: mailbox: ti,secure-proxy: Convert to json schema
  mailbox: arm_mhu_db: Remove redundant dev_err call in mhu_db_probe()
  mailbox: sprd: Add supplementary inbox support
  dt-bindings: mailbox: Add interrupt-names to SPRD mailbox
  mailbox: sprd: Introduce refcnt when clients requests/free channels
  MAINTAINERS: Add DT bindings directory to mailbox
  mailbox: fix various typos in comments
  mailbox: pcc: fix platform_no_drv_owner.cocci warnings
  dt-bindings: mailbox: Add compatible for SM8350 IPCC

Pull backlight updates from Lee Jones:
 "New Device Support:
   - Add support for PMI8994 to Qualcom WLED
   - Add support for KTD259 to Kinetic KTD253

  Fix-ups:
   - Device Tree related fix-ups; kinetic,ktd253
   - Use proper sequence during sync_toggle; qcom-wled
   - Fix Wmisleading-indentation warnings; jornada720_bl

  Bug Fixes:
   - Fix sync toggle on WLED4; qcom-wled
   - Fix FSC update on WLED5; qcom-wled"

* tag 'backlight-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: journada720: Fix Wmisleading-indentation warning
  backlight: qcom-wled: Correct the sync_toggle sequence
  backlight: qcom-wled: Fix FSC update issue for WLED5
  dt-bindings: backlight: Add Kinetic KTD259 bindings
  backlight: ktd253: Support KTD259
  backlight: qcom-wled: Use sink_addr for sync toggle
  dt-bindings: backlight: qcom-wled: Add PMI8994 compatible

Pull MFD updates from Lee Jones:
 "Core Framework:
   - Add support for Software Nodes to MFD Core
   - Remove support for Device Properties from MFD Core
   - Use standard APIs in MFD Core

  New Drivers:
   - Add support for ROHM BD9576MUF and BD9573MUF PMICs
   - Add support for Netronix Embedded Controller, PWM and RTC
   - Add support for Actions Semi ATC260x PMICs and OnKey

  New Device Support:
   - Add support for DG1 PCIe Graphics Card to Intel PMT
   - Add support for ROHM BD71815 PMIC to ROHM BD71828
   - Add support for Tolino Shine 2 HD to Netronix Embedded Controller
   - Add support for AX10 BMC Secure Updates to Intel M10 BMC

  Removed Device Support:
   - Remove Arizona Extcon support from MFD
   - Remove ST-E AB8500 Power Supply code from MFD
   - Remove AB3100 altogether

  New Functionality:
   - Add support for SMBus and I2C modes to Dialog DA9063
   - Switch to using Software Nodes in Intel (various)

  New/converted Device Tree bindings:
   - rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions
     atc260x, ricoh rn5t618, qcom pm8xxx

- Fix-ups:
   - Fix error handling/path; intel_pmt
   - Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
   - Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618,
     max8997
   - Use correct data-type; db8500-prcmu
   - Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
   - Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
   - Regmap related fix-ups; intel-m10-bmc, sec-core
   - Reorder resource freeing during remove; intel_quark_i2c_gpio
   - Make table indexing more robust; intel_quark_i2c_gpio
   - Fix reference imbalances; arizona-irq
   - Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
     intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio

  Bug Fixes:
   - Fix incorrect (register) values; intel-m10-bmc
   - Kconfig related fixes; ABX500_CORE
   - Do not clear the Auto Reload Register; stm32-timers"

* tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits)
  mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates
  Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell"
  mfd: twl: Remove unused inline function twl4030charger_usb_en()
  dt-bindings: mfd: Convert pm8xxx bindings to yaml
  dt-bindings: mfd: Add compatible for pmk8350 rtc
  i2c: designware: Get rid of legacy platform data
  mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes
  mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000"
  mfd: arizona: Fix rumtime PM imbalance on error
  mfd: max8997: Replace 8998 with 8997
  mfd: core: Use acpi_find_child_device() for child devices lookup
  mfd: intel_quark_i2c_gpio: Don't play dirty trick with const
  mfd: intel_quark_i2c_gpio: Enable MSI interrupt
  mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing
  mfd: ntxec: Support for EC in Tolino Shine 2 HD
  mfd: stm32-timers: Avoid clearing auto reload register
  mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions
  mfd: intel_quark_i2c_gpio: Remove unused struct device member
  mfd: intel_quark_i2c_gpio: Unregister resources in reversed order
  mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500
  ...

Pull MMC and MEMSTICK updates from Ulf Hansson:
 "MMC core:
   - Fix hanging on I/O during system suspend for removable cards
   - Set read only for SD cards with permanent write protect bit
   - Power cycle the SD/SDIO card if CMD11 fails for UHS voltage
   - Issue a cache flush for eMMC only when it's enabled
   - Adopt to updated cache ctrl settings for eMMC from MMC ioctls
   - Use use device property API when parsing voltages
   - Don't retry eMMC sanitize cmds
   - Use the timeout from the MMC ioctl for eMMC santize cmds

  MMC host:
   - mmc_spi: Make of_mmc_spi.c resource provider agnostic
   - mmc_spi: Use polling for card detect even without voltage-ranges
   - sdhci: Check for reset prior to DMA address unmap
   - sdhci-acpi: Add support for the AMDI0041 eMMC controller variant
   - sdhci-esdhc-imx: Depending on OF Kconfig and cleanup code
   - sdhci-pci: Add PCI IDs for Intel LKF
   - sdhci-pci: Fix initialization of some SD cards for Intel BYT
   - sdhci-pci-gli: Various improvements for GL97xx variants
   - sdhci-of-dwcmshc: Enable support for MMC_CAP_WAIT_WHILE_BUSY
   - sdhci-of-dwcmshc: Add ACPI support for BlueField-3 SoC
   - sdhci-of-dwcmshc: Add Rockchip platform support
   - tmio/renesas_sdhi: Extend support for reset and use a reset controller
   - tmio/renesas_sdhi: Enable support for MMC_CAP_WAIT_WHILE_BUSY
   - tmio/renesas_sdhi: Various improvements

  MEMSTICK:
   - Minor improvements/cleanups"

* tag 'mmc-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (79 commits)
  mmc: block: Issue a cache flush only when it's enabled
  memstick: r592: ignore kfifo_out() return code again
  mmc: block: Update ext_csd.cache_ctrl if it was written
  mmc: mmc_spi: Make of_mmc_spi.c resource provider agnostic
  mmc: mmc_spi: Use already parsed IRQ
  mmc: mmc_spi: Drop unused NO_IRQ definition
  mmc: mmc_spi: Set up polling even if voltage-ranges is not present
  mmc: core: Convert mmc_of_parse_voltage() to use device property API
  mmc: core: Correct descriptions in mmc_of_parse()
  mmc: dw_mmc-rockchip: Just set default sample value for legacy mode
  mmc: sdhci-s3c: constify uses of driver/match data
  mmc: sdhci-s3c: correct kerneldoc of sdhci_s3c_drv_data
  mmc: sdhci-s3c: simplify getting of_device_id match data
  mmc: tmio: always restore irq register
  mmc: sdhci-pci-gli: Enlarge ASPM L1 entry delay of GL975x
  mmc: core: Let eMMC sanitize not retry in case of timeout/failure
  mmc: core: Add a retries parameter to __mmc_switch function
  memstick: r592: remove unused variable
  mmc: sdhci-st: Remove unnecessary error log
  mmc: sdhci-msm: Remove unnecessary error log
  ...

Pull IPMI updates from Corey Minyard:
 "A bunch of little cleanups

  Nothing major, no functional changes"

* tag 'for-linus-5.13-1' of git://github.com/cminyard/linux-ipmi:
  ipmi_si: Join string literals back
  ipmi_si: Drop redundant check before calling put_device()
  ipmi_si: Use strstrip() to remove surrounding spaces
  ipmi_si: Get rid of ->addr_source_cleanup()
  ipmi_si: Reuse si_to_str[] array in ipmi_hardcode_init_one()
  ipmi_si: Introduce ipmi_panic_event_str[] array
  ipmi_si: Use proper ACPI macros to check error code for failures
  ipmi_si: Utilize temporary variable to hold device pointer
  ipmi_si: Remove bogus err_free label
  ipmi_si: Switch to use platform_get_mem_or_io()
  ipmi: Handle device properties with software node API
  ipmi:ssif: make ssif_i2c_send() void
  ipmi: Refine retry conditions for getting device id

Pull devicetree updates from Rob Herring:

 - Refactor powerpc and arm64 kexec DT handling to common code. This
   enables IMA on arm64.

 - Add kbuild support for applying DT overlays at build time. The first
   user are the DT unittests.

 - Fix kerneldoc formatting and W=1 warnings in drivers/of/

 - Fix handling 64-bit flag on PCI resources

 - Bump dtschema version required to v2021.2.1

 - Enable undocumented compatible checks for dtbs_check. This allows
   tracking of missing binding schemas.

 - DT docs improvements. Regroup the DT docs and add the example schema
   and DT kernel ABI docs to the doc build.

 - Convert Broadcom Bluetooth and video-mux bindings to schema

 - Add QCom sm8250 Venus video codec binding schema

 - Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile
   Technologies Inc.

 - Cleanup of DT schema type references on common properties and
   standard unit properties

* tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
  powerpc: If kexec_build_elf_info() fails return immediately from elf64_load()
  powerpc: Free fdt on error in elf64_load()
  of: overlay: Fix kerneldoc warning in of_overlay_remove()
  of: linux/of.h: fix kernel-doc warnings
  of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses
  dt-bindings: bcm4329-fmac: add optional brcm,ccode-map
  docs: dt: update writing-schema.rst references
  dt-bindings: media: venus: Add sm8250 dt schema
  of: base: Fix spelling issue with function param 'prop'
  docs: dt: Add DT API documentation
  of: Add missing 'Return' section in kerneldoc comments
  of: Fix kerneldoc output formatting
  docs: dt: Group DT docs into relevant sub-sections
  docs: dt: Make 'Devicetree' wording more consistent
  docs: dt: writing-schema: Include the example schema in the doc build
  docs: dt: writing-schema: Remove spurious indentation
  dt-bindings: Fix reference in submitting-patches.rst to the DT ABI doc
  dt-bindings: ddr: Add optional manufacturer and revision ID to LPDDR3
  dt-bindings: media: video-interfaces: Drop the example
  devicetree: bindings: clock: Minor typo fix in the file armada3700-tbg-clock.txt
  ...

Pull power supply and reset updates from Sebastian Reichel:
 "battery/charger driver changes:
   - core:
      - provide function stubs if CONFIG_POWER_SUPPLY=n
      - reduce loglevel for probe defer info
   - surface:
      - new battery and charger drivers for Surface
   - bq27xxx:
      - add bq78z100 support
      - fix current_now/power_avg for newer chips
   - cw2015:
      - add CHARGE_NOW support
   - ab8500:
      - drop pdata support
   - convert most DT bindings to YAML
   - lots of minor fixes and cleanups

  reset drivers:
   - ltc2952-poweroff:
      - make trigger delay configurable from DT
   - minor fixes and cleanups"

* tag 'for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (97 commits)
  power: supply: cpcap-battery: fix invalid usage of list cursor
  power: supply: bq256xx: add kerneldoc for structure members
  power: supply: act8945a: correct kerneldoc
  power: supply: max17040: remove unneeded double cast
  power: supply: max17040: handle device_property_read_u8_array() failure
  power: supply: max14577: remove unneeded variable initialization
  power: supply: surface-charger: Make symbol 'surface_ac_pm_ops' static
  power: supply: surface-battery: Make some symbols static
  power: reset: restart-poweroff: Add missing MODULE_DEVICE_TABLE
  power: reset: hisi-reboot: add missing MODULE_DEVICE_TABLE
  power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove()
  power: supply: generic-adc-battery: fix possible use-after-free in gab_remove()
  power: supply: Add AC driver for Surface Aggregator Module
  power: supply: Add battery driver for Surface Aggregator Module
  power: supply: bq25980: Move props from battery node
  power: supply: core: Use true and false for bool variable
  power: supply: goldfish: Remove the GOLDFISH dependency
  power: reset: ltc2952: make trigger delay configurable
  power: supply: cpcap-charger: Simplify bool conversion
  power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce
  ...

Pull HSI update from Sebastian Reichel:

 - memory leak fix in hsi_add_client_from_dt() error path

* tag 'hsi-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: core: fix resource leaks in hsi_add_client_from_dt()

Pull io_uring updates from Jens Axboe:

 - Support for multi-shot mode for POLL requests

 - More efficient reference counting. This is shamelessly stolen from
   the mm side. Even though referencing is mostly single/dual user, the
   128 count was retained to keep the code the same. Maybe this
   should/could be made generic at some point.

 - Removal of the need to have a manager thread for each ring. The
   manager threads only job was checking and creating new io-threads as
   needed, instead we handle this from the queue path.

 - Allow SQPOLL without CAP_SYS_ADMIN or CAP_SYS_NICE. Since 5.12, this
   thread is "just" a regular application thread, so no need to restrict
   use of it anymore.

 - Cleanup of how internal async poll data lifetime is managed.

 - Fix for syzbot reported crash on SQPOLL cancelation.

 - Make buffer registration more like file registrations, which includes
   flexibility in avoiding full set unregistration and re-registration.

 - Fix for io-wq affinity setting.

 - Be a bit more defensive in task->pf_io_worker setup.

 - Various SQPOLL fixes.

 - Cleanup of SQPOLL creds handling.

 - Improvements to in-flight request tracking.

 - File registration cleanups.

 - Tons of cleanups and little fixes

* tag 'for-5.13/io_uring-2021-04-27' of git://git.kernel.dk/linux-block: (156 commits)
  io_uring: maintain drain logic for multishot poll requests
  io_uring: Check current->io_uring in io_uring_cancel_sqpoll
  io_uring: fix NULL reg-buffer
  io_uring: simplify SQPOLL cancellations
  io_uring: fix work_exit sqpoll cancellations
  io_uring: Fix uninitialized variable up.resv
  io_uring: fix invalid error check after malloc
  io_uring: io_sq_thread() no longer needs to reset current->pf_io_worker
  kernel: always initialize task->pf_io_worker to NULL
  io_uring: update sq_thread_idle after ctx deleted
  io_uring: add full-fledged dynamic buffers support
  io_uring: implement fixed buffers registration similar to fixed files
  io_uring: prepare fixed rw for dynanic buffers
  io_uring: keep table of pointers to ubufs
  io_uring: add generic rsrc update with tags
  io_uring: add IORING_REGISTER_RSRC
  io_uring: enumerate dynamic resources
  io_uring: add generic path for rsrc update
  io_uring: preparation for rsrc tagging
  io_uring: decouple CQE filling from requests
  ...

Pull libata updates from Jens Axboe:
 "Mostly cleanups this time, but also a few additions:

   - kernel-doc cleanups and sanitization (Lee)

   - Spelling fix (Bhaskar)

   - Fix ata_qc_from_tag() return value check in dwc_460ex (Dinghao)

   - Fall-through warning fix (Gustavo)

   - IRQ registration fixes (Sergey)

   - Add AHCI support for Tegra186 (Sowjanya)

   - Add xiling phy support for AHCI (Piyush)

   - SXS disable fix for AHCI for Hisilicon Kunpeng920 (Xingui)

   - pata legacy probe mask support (Maciej)"

* tag 'for-5.13/libata-2021-04-27' of git://git.kernel.dk/linux-block: (54 commits)
  libata: Fix fall-through warnings for Clang
  pata_ipx4xx_cf: Fix unsigned comparison with less than zero
  ata: ahci_tegra: call tegra_powergate_power_off only when PM domain is not present
  ata: ahci_tegra: Add AHCI support for Tegra186
  dt-binding: ata: tegra: Add dt-binding documentation for Tegra186
  dt-bindings: ata: tegra: Convert binding documentation to YAML
  pata_legacy: Add `probe_mask' parameter like with ide-generic
  pata_platform: Document `pio_mask' module parameter
  pata_legacy: Properly document module parameters
  ata: ahci: ceva: Updated code by using dev_err_probe()
  ata: ahci: Disable SXS for Hisilicon Kunpeng920
  ata: libahci_platform: fix IRQ check
  sata_mv: add IRQ checks
  ata: pata_acpi: Fix some incorrect function param descriptions
  ata: libata-acpi: Fix function name and provide description for 'prev_gtf'
  ata: sata_mv: Fix misnaming of 'mv_bmdma_stop()'
  ata: pata_cs5530: Fix misspelling of 'cs5530_init_one()'s 'pdev' param
  ata: pata_legacy: Repair a couple kernel-doc problems
  ata: ata_generic: Fix misspelling of 'ata_generic_init_one()'
  ata: pata_opti: Fix spelling issue of 'val' in 'opti_write_reg()'
  ...

Pull block driver updates from Jens Axboe:

 - MD changes via Song:
        - raid5 POWER fix
        - raid1 failure fix
        - UAF fix for md cluster
        - mddev_find_or_alloc() clean up
        - Fix NULL pointer deref with external bitmap
        - Performance improvement for raid10 discard requests
        - Fix missing information of /proc/mdstat

 - rsxx const qualifier removal (Arnd)

 - Expose allocated brd pages (Calvin)

 - rnbd via Gioh Kim:
        - Change maintainer
        - Change domain address of maintainers' email
        - Add polling IO mode and document update
        - Fix memory leak and some bug detected by static code analysis
          tools
        - Code refactoring

 - Series of floppy cleanups/fixes (Denis)

 - s390 dasd fixes (Julian)

 - kerneldoc fixes (Lee)

 - null_blk double free (Lv)

 - null_blk virtual boundary addition (Max)

 - Remove xsysace driver (Michal)

 - umem driver removal (Davidlohr)

 - ataflop fixes (Dan)

 - Revalidate disk removal (Christoph)

 - Bounce buffer cleanups (Christoph)

 - Mark lightnvm as deprecated (Christoph)

 - mtip32xx init cleanups (Shixin)

 - Various fixes (Tian, Gustavo, Coly, Yang, Zhang, Zhiqiang)

* tag 'for-5.13/drivers-2021-04-27' of git://git.kernel.dk/linux-block: (143 commits)
  async_xor: increase src_offs when dropping destination page
  drivers/block/null_blk/main: Fix a double free in null_init.
  md/raid1: properly indicate failure when ending a failed write request
  md-cluster: fix use-after-free issue when removing rdev
  nvme: introduce generic per-namespace chardev
  nvme: cleanup nvme_configure_apst
  nvme: do not try to reconfigure APST when the controller is not live
  nvme: add 'kato' sysfs attribute
  nvme: sanitize KATO setting
  nvmet: avoid queuing keep-alive timer if it is disabled
  brd: expose number of allocated pages in debugfs
  ataflop: fix off by one in ataflop_probe()
  ataflop: potential out of bounds in do_format()
  drbd: Fix fall-through warnings for Clang
  block/rnbd: Use strscpy instead of strlcpy
  block/rnbd-clt-sysfs: Remove copy buffer overlap in rnbd_clt_get_path_name
  block/rnbd-clt: Remove max_segment_size
  block/rnbd-clt: Generate kobject_uevent when the rnbd device state changes
  block/rnbd-srv: Remove unused arguments of rnbd_srv_rdma_ev
  Documentation/ABI/rnbd-clt: Add description for nr_poll_queues
  ...

Pull block updates from Jens Axboe:
 "Pretty quiet round this time, which is nice. In detail:

   - Series revamping bounce buffer support (Christoph)

   - Dead code removal (Christoph, Bart)

   - Partition iteration revamp, now using xarray (Christoph)

   - Passthrough request scheduler improvements (Lin)

   - Series of BFQ improvements (Paolo)

   - Fix ioprio task iteration (Peter)

   - Various little tweaks and fixes (Tejun, Saravanan, Bhaskar, Max,
     Nikolay)"

* tag 'for-5.13/block-2021-04-27' of git://git.kernel.dk/linux-block: (41 commits)
  blk-iocost: don't ignore vrate_min on QD contention
  blk-mq: Fix spurious debugfs directory creation during initialization
  bfq/mq-deadline: remove redundant check for passthrough request
  blk-mq: bypass IO scheduler's limit_depth for passthrough request
  block: Remove an obsolete comment from sg_io()
  block: move bio_list_copy_data to pktcdvd
  block: remove zero_fill_bio_iter
  block: add queue_to_disk() to get gendisk from request_queue
  block: remove an incorrect check from blk_rq_append_bio
  block: initialize ret in bdev_disk_changed
  block: Fix sys_ioprio_set(.which=IOPRIO_WHO_PGRP) task iteration
  block: remove disk_part_iter
  block: simplify diskstats_show
  block: simplify show_partition
  block: simplify printk_all_partitions
  block: simplify partition_overlaps
  block: simplify partition removal
  block: take bd_mutex around delete_partitions in del_gendisk
  block: refactor blk_drop_partitions
  block: move more syncing and invalidation to delete_partition
  ...

In case ethernet driver is enabled and INET is disabled, selftest will
fail to build.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 3e1e58d6 ("net: add generic selftest support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210428130947.29649-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Variable ns is set to 'skb->data[17]' but this value is never read as
it is overwritten or not used later on, hence it is a redundant
assignment and can be removed.

Cleans up the following clang-analyzer warning:

net/netrom/nr_in.c:156:2: warning: Value stored to 'ns' is never read
[clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1619603885-115604-1-git-send-email-jiapeng.chong@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Variable 'ret' is set to zero but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.

Cleans up the following clang-analyzer warning:

drivers/net/tun.c:3008:2: warning: Value stored to 'ret' is never read
[clang-analyzer-deadcode.DeadStores]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1619603852-114996-1-git-send-email-yang.lee@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add downshift support for 88E1240, it uses the same downshift
configuration registers as 88E1011.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/20210428095356.621536-1-fido_max@inbox.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the for-loop in ksz8_port_init_cnt is causing a static
analysis infinite loop warning with the comparison of
mib->cnt_ptr < dev->reg_mib_cnt. This occurs because mib->cnt_ptr
is a u8 and dev->reg_mib_cnt is an int and the analyzer determines
that mib->cnt_ptr potentially can wrap around to zero if the value
in dev->reg_mib_cnt is > 255. However, this value is never this
large, it is always less than 256 so make reg_mib_cnt a u8.

Addresses-Coverity: ("Infinite loop")
Fixes: e66f840c ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210428120010.337959-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The assignment is not being used and redundant.
The check for null is redundant as nf_conntrack_put() also
checks this.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Link: https://lore.kernel.org/r/20210428060532.3330974-1-roid@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>