- 07 Oct, 2012 3 commits
-
-
Bjørn Mork authored
commit 160c9425 upstream. Interface #5 on ZTE MF683 is a QMI/wwan interface. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Cc: Shawn J. Goff <shawn7400@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Snitzer authored
commit ba1cbad9 upstream. The access beyond the end of device BUG_ON that was introduced to dm_request_fn via commit 29e4013d ("dm: implement REQ_FLUSH/FUA support for request-based dm") was an overly drastic (but simple) response to this situation. I have received a report that this BUG_ON was hit and now think it would be better to use dm_kill_unmapped_request() to fail the clone and original request with -EIO. map_request() will assign the valid target returned by dm_table_find_target to tio->ti. But when the target isn't valid tio->ti is never assigned (because map_request isn't called); so add a check for tio->ti != NULL to dm_done(). Reported-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
commit 8110e16d upstream. IBM reported a deadlock in select_parent(). This was found to be caused by taking rename_lock when already locked when restarting the tree traversal. There are two cases when the traversal needs to be restarted: 1) concurrent d_move(); this can only happen when not already locked, since taking rename_lock protects against concurrent d_move(). 2) racing with final d_put() on child just at the moment of ascending to parent; rename_lock doesn't protect against this rare race, so it can happen when already locked. Because of case 2, we need to be able to handle restarting the traversal when rename_lock is already held. This patch fixes all three callers of try_to_ascend(). IBM reported that the deadlock is gone with this patch. [ I rewrote the patch to be smaller and just do the "goto again" if the lock was already held, but credit goes to Miklos for the real work. - Linus ] Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
- 02 Oct, 2012 37 commits
-
-
Greg Kroah-Hartman authored
-
Will Deacon authored
commit a76d7bd9 upstream. The open-coded mutex implementation for ARMv6+ cores suffers from a severe lack of barriers, so in the uncontended case we don't actually protect any accesses performed during the critical section. Furthermore, the code is largely a duplication of the ARMv6+ atomic_dec code but optimised to remove a branch instruction, as the mutex fastpath was previously inlined. Now that this is executed out-of-line, we can reuse the atomic access code for the locking (in fact, we use the xchg code as this produces shorter critical sections). This patch uses the generic xchg based implementation for mutexes on ARMv6+, which introduces barriers to the lock/unlock operations and also has the benefit of removing a fair amount of inline assembly code. Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Nicolas Pitre <nico@linaro.org> Reported-by:
Shan Kang <kangshan0910@gmail.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Alan Stern authored
commit 0d00dc26 upstream. This patch (as1607) fixes a race that can occur if a USB host controller is removed while a process is reading the /sys/kernel/debug/usb/devices file. The usb_device_read() routine uses the bus->root_hub pointer to determine whether or not the root hub is registered. The is not a valid test, because the pointer is set before the root hub gets registered and remains set even after the root hub is unregistered and deallocated. As a result, usb_device_read() or usb_device_dump() can access freed memory, causing an oops. The patch changes the test to use the hcd->rh_registered flag, which does get set and cleared at the appropriate times. It also makes sure to hold the usb_bus_list_lock mutex while setting the flag, so that usb_device_read() will become aware of new root hubs as soon as they are registered. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Don Zickus <dzickus@redhat.com> Signed-off-by:
-
Andi Kleen authored
commit a129a7c8 upstream. When running on 32bit the mce handler could misinterpret vm86 mode as ring 0. This can affect whether it does recovery or not; it was possible to panic when recovery was actually possible. Fix this by always forcing vm86 to look like ring 3. [ Backport to 3.0 notes: Things changed there slightly: - move mce_get_rip() up. It fills up m->cs and m->ip values which are evaluated in mce_severity(). Therefore move it up right before the mce_severity call. This seem to be another bug in 3.0? - Place the backport (fix m->cs in V86 case) to where m->cs gets filled which is mce_get_rip() in 3.0 ] Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Thomas Renninger <trenn@suse.de> Reviewed-by:
-
Yasunori Goto authored
commit b5740f4b upstream. try_to_wake_up() has a problem which may change status from TASK_DEAD to TASK_RUNNING in race condition with SMI or guest environment of virtual machine. As a result, exited task is scheduled() again and panic occurs. Here is the sequence how it occurs: ----------------------------------+----------------------------- | CPU A | CPU B ----------------------------------+----------------------------- TASK A calls exit().... do_exit() exit_mm() down_read(mm->mmap_sem); rwsem_down_failed_common() set TASK_UNINTERRUPTIBLE set waiter.task <= task A list_add to sem->wait_list : raw_spin_unlock_irq() (I/O interruption occured) __rwsem_do_wake(mmap_sem) list_del(&waiter->list); waiter->task = NULL wake_up_process(task A) try_to_wake_up() (task is still TASK_UNINTERRUPTIBLE) p->on_rq is still 1.) ttwu_do_wakeup() (*A) : (I/O interruption handler finished) if (!waiter.task) schedule() is not called due to waiter.task is NULL. tsk->state = TASK_RUNNING : check_preempt_curr(); : task->state = TASK_DEAD (*B) <--- set TASK_RUNNING (*C) schedule() (exit task is running again) BUG_ON() is called! -------------------------------------------------------- The execution time between (*A) and (*B) is usually very short, because the interruption is disabled, and setting TASK_RUNNING at (*C) must be executed before setting TASK_DEAD. HOWEVER, if SMI is interrupted between (*A) and (*B), (*C) is able to execute AFTER setting TASK_DEAD! Then, exited task is scheduled again, and BUG_ON() is called.... If the system works on guest system of virtual machine, the time between (*A) and (*B) may be also long due to scheduling of hypervisor, and same phenomenon can occur. By this patch, do_exit() waits for releasing task->pi_lock which is used in try_to_wake_up(). It guarantees the task becomes TASK_DEAD after waking up. Signed-off-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20120117174031.3118.E1E9C6FF@jp.fujitsu.comSigned-off-by:
Ingo Molnar <mingo@elte.hu> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Herton Ronaldo Krzesinski authored
commit 067aa481 upstream. Commit 178db7d3, "spi: Fix device unregistration when unregistering the bus master", changed spi device initialization of dev.parent pointer to be the master's device pointer instead of his parent. This introduced a bug in spi-fsl-spi, since its usage of spi device pointer was not updated accordingly. This was later fixed by commit 5039a869, "spi/mpc83xx: fix NULL pdata dereference bug", but it missed another spot on fsl_spi_cs_control function where we also need to update usage of spi device pointer. This change address that. Signed-off-by:
Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Acked-by:
Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Cc: Alfredo Capella <alfredo.capella@gmail.com> Signed-off-by:
-
Kenth Eriksson authored
commit 5039a869 upstream. Commit 178db7d3, "spi: Fix device unregistration when unregistering the bus master", changed device initialization to be children of the bus master, not children of the bus masters parent device. The pdata pointer used in fsl_spi_chipselect must updated to reflect the changed initialization. Signed-off-by:
Kenth Eriksson <kenth.eriksson@transmode.com> Acked-by:
-
Artem Bityutskiy authored
commit 78b495c3 upstream UBI was mistakingly using 'kfree()' instead of 'kmem_cache_free()' when freeing "attach eraseblock" structures in vtbl.c. Thankfully, this happened only when we were doing auto-format, so many systems were unaffected. However, there are still many users affected. It is strange, but the system did not crash and nothing bad happened when the SLUB memory allocator was used. However, in case of SLOB we observed an crash right away. This problem was introduced in 2.6.39 by commit "6c1e875c UBI: add slab cache for ubi_scan_leb objects" Reported-by:
Richard Genoud <richard.genoud@gmail.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Chris Boot authored
commit d4a4206e upstream. ASPM on the 82574 causes trouble. Currently the driver disables L0s for this NIC but only disables L1 if the MTU is >1500. This patch simply causes L1 to be disabled regardless of the MTU setting. Signed-off-by:
Chris Boot <bootc@bootc.net> Cc: "Wyborny, Carolyn" <carolyn.wyborny@intel.com> Cc: Nix <nix@esperi.org.uk> Link: https://lkml.org/lkml/2012/3/19/362Tested-by:
Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
Nikola Ciprich <nikola.ciprich@linuxbox.cz> Signed-off-by:
-
Al Cooper authored
commit 4188bba0 upstream. The driver should not try to switch to 1.8V when the SD 3.0 host controller does not have any UHS capabilities bits set (SDR50, DDR50 or SDR104). See page 72 of "SD Specifications Part A2 SD Host Controller Simplified Specification Version 3.00" under "1.8V Signaling Enable". Instead of setting SDR12 and SDR25 in the host capabilities data structure for all V3.0 host controllers, only set them if SDR104, SDR50 or DDR50 is set in the host capabilities register. This will prevent the switch to 1.8V later. Signed-off-by:
Al Cooper <acooper@gmail.com> Acked-by:
Arindam Nath <arindam.nath@amd.com> Acked-by:
Philip Rakity <prakity@marvell.com> Acked-by:
Girish K S <girish.shivananjappa@linaro.org> Signed-off-by:
Chris Ball <cjb@laptop.org> Signed-off-by:
-
Subhash Jadavani authored
commit f2815f68 upstream. Here is Essential conditions to indicate Version 3.00 Card (SD_SPEC=2 and SD_SPEC3=1) : (1) The card shall support CMD6 (2) The card shall support CMD8 (3) The card shall support CMD42 (4) User area capacity shall be up to 2GB (SDSC) or 32GB (SDHC) User area capacity shall be more than or equal to 32GB and up to 2TB (SDXC) (5) Speed Class shall be supported (SDHC or SDXC) So even if SD card doesn't support any of the newly defined UHS-I bus speed mode, it can advertise itself as SD3.0 cards as long as it supports all the essential conditions of SD3.0 cards. Given this, these type of cards should atleast run in High Speed mode @50MHZ if it supports HS. But current initialization sequence for SD3.0 cards is such that these non-UHS-I SD3.0 cards runs in Default Speed mode @25MHz. This patch makes sure that these non-UHS-I SD3.0 cards run in High Speed Mode @50MHz. Tested this patch with SanDisk Extreme SDHC 8GB Class 10 card. Reported-by:
"Hiremath, Vaibhav" <hvaibhav@ti.com> Signed-off-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
-
Phillip Lougher authored
commit cc37f75a upstream. A Squashfs filesystem containing nothing but an empty directory, although unusual and ultimately pointless, is still valid. The directory_table >= next_table sanity check rejects these filesystems as invalid because the directory_table is empty and equal to next_table. Signed-off-by:
Phillip Lougher <phillip@squashfs.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Tomoya MORINAGA authored
commit 38bd2a1a upstream. Parity Setting value is reverse. E.G. In case of setting ODD parity, EVEN value is set. This patch inverts "if" condition. Signed-off-by:
Tomoya MORINAGA <tomoya.rohm@gmail.com> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Tomoya MORINAGA authored
commit 9539dfb7 upstream. Rx Error interrupt(E.G. parity error) is not enabled. So, when parity error occurs, error interrupt is not occurred. As a result, the received data is not dropped. This patch adds enable/disable rx error interrupt code. Signed-off-by:
-
Alan Cox authored
commit 9bc03743 upstream. Otherwise we fall back to the wrong value. Reported-by: <dcb314@hotmail.com> Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44091Signed-off-by:
-
Douglas Bagnall authored
commit 720bb643 upstream. For some reason, when the lirc daemon learns that a usb remote control has been unplugged, it wants to read the sysfs attributes of the disappearing device. This is useful for uncovering transient inconsistencies, but less so for keeping the system running when such inconsistencies exist. Under some circumstances (like every time I unplug my dvb stick from my laptop), lirc catches an rc_dev whose raw event handler has been removed (presumably by ir_raw_event_unregister), and proceeds to interrogate the raw protocols supported by the NULL pointer. This patch avoids the NULL dereference, and ignores the issue of how this state of affairs came about in the first place. Version 2 incorporates changes recommended by Mauro Carvalho Chehab (-ENODEV instead of -EINVAL, and a signed-off-by). Signed-off-by:
Douglas Bagnall <douglas@paradise.net.nz> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by:
-
John Stultz authored
commit cee58483 upstream Andreas Bombe reported that the added ktime_t overflow checking added to timespec_valid in commit 4e8b1452 ("time: Improve sanity checking of timekeeping inputs") was causing problems with X.org because it caused timeouts larger then KTIME_T to be invalid. Previously, these large timeouts would be clamped to KTIME_MAX and would never expire, which is valid. This patch splits the ktime_t overflow checking into a new timespec_valid_strict function, and converts the timekeeping codes internal checking to use this more strict function. Reported-and-tested-by:
Andreas Bombe <aeb@debian.org> Cc: Zhouping Liu <zliu@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
John Stultz authored
commit bf2ac312 upstream If update_wall_time() is called and the current offset isn't large enough to accumulate, avoid re-calling timekeeping_adjust which may change the clock freq and can cause 1ns inconsistencies with CLOCK_REALTIME_COARSE/CLOCK_MONOTONIC_COARSE. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
John Stultz authored
commit 4e8b1452 upstream Unexpected behavior could occur if the time is set to a value large enough to overflow a 64bit ktime_t (which is something larger then the year 2262). Also unexpected behavior could occur if large negative offsets are injected via adjtimex. So this patch improves the sanity check timekeeping inputs by improving the timespec_valid() check, and then makes better use of timespec_valid() to make sure we don't set the time to an invalid negative value or one that overflows ktime_t. Note: This does not protect from setting the time close to overflowing ktime_t and then letting natural accumulation cause the overflow. Reported-by:
CAI Qian <caiqian@redhat.com> Reported-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
-
Eric Dumazet authored
commit bec4596b upstream. drop_monitor calls several sleeping functions while in atomic context. BUG: sleeping function called from invalid context at mm/slub.c:943 in_atomic(): 1, irqs_disabled(): 0, pid: 2103, name: kworker/0:2 Pid: 2103, comm: kworker/0:2 Not tainted 3.5.0-rc1+ #55 Call Trace: [<ffffffff810697ca>] __might_sleep+0xca/0xf0 [<ffffffff811345a3>] kmem_cache_alloc_node+0x1b3/0x1c0 [<ffffffff8105578c>] ? queue_delayed_work_on+0x11c/0x130 [<ffffffff815343fb>] __alloc_skb+0x4b/0x230 [<ffffffffa00b0360>] ? reset_per_cpu_data+0x160/0x160 [drop_monitor] [<ffffffffa00b022f>] reset_per_cpu_data+0x2f/0x160 [drop_monitor] [<ffffffffa00b03ab>] send_dm_alert+0x4b/0xb0 [drop_monitor] [<ffffffff810568e0>] process_one_work+0x130/0x4c0 [<ffffffff81058249>] worker_thread+0x159/0x360 [<ffffffff810580f0>] ? manage_workers.isra.27+0x240/0x240 [<ffffffff8105d403>] kthread+0x93/0xa0 [<ffffffff816be6d4>] kernel_thread_helper+0x4/0x10 [<ffffffff8105d370>] ? kthread_freezable_should_stop+0x80/0x80 [<ffffffff816be6d0>] ? gs_change+0xb/0xb Rework the logic to call the sleeping functions in right context. Use standard timer/workqueue api to let system chose any cpu to perform the allocation and netlink send. Also avoid a loop if reset_per_cpu_data() cannot allocate memory : use mod_timer() to wait 1/10 second before next try. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Neil Horman <nhorman@tuxdriver.com> Reviewed-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Neil Horman authored
commit 4fdcfa12 upstream. I just noticed after some recent updates, that the init path for the drop monitor protocol has a minor error. drop monitor maintains a per cpu structure, that gets initalized from a single cpu. Normally this is fine, as the protocol isn't in use yet, but I recently made a change that causes a failed skb allocation to reschedule itself . Given the current code, the implication is that this workqueue reschedule will take place on the wrong cpu. If drop monitor is used early during the boot process, its possible that two cpus will access a single per-cpu structure in parallel, possibly leading to data corruption. This patch fixes the situation, by storing the cpu number that a given instance of this per-cpu data should be accessed from. In the case of a need for a reschedule, the cpu stored in the struct is assigned the rescheule, rather than the currently executing cpu Tested successfully by myself. Signed-off-by:
-
Neil Horman authored
commit 3885ca78 upstream. Eric Dumazet pointed out to me that the drop_monitor protocol has some holes in its smp protections. Specifically, its possible to replace data->skb while its being written. This patch corrects that by making data->skb an rcu protected variable. That will prevent it from being overwritten while a tracepoint is modifying it. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> CC: David Miller <davem@davemloft.net> Acked-by:
-
Neil Horman authored
commit cde2e9a6 upstream. Eric Dumazet pointed out this warning in the drop_monitor protocol to me: [ 38.352571] BUG: sleeping function called from invalid context at kernel/mutex.c:85 [ 38.352576] in_atomic(): 1, irqs_disabled(): 0, pid: 4415, name: dropwatch [ 38.352580] Pid: 4415, comm: dropwatch Not tainted 3.4.0-rc2+ #71 [ 38.352582] Call Trace: [ 38.352592] [<ffffffff8153aaf0>] ? trace_napi_poll_hit+0xd0/0xd0 [ 38.352599] [<ffffffff81063f2a>] __might_sleep+0xca/0xf0 [ 38.352606] [<ffffffff81655b16>] mutex_lock+0x26/0x50 [ 38.352610] [<ffffffff8153aaf0>] ? trace_napi_poll_hit+0xd0/0xd0 [ 38.352616] [<ffffffff810b72d9>] tracepoint_probe_register+0x29/0x90 [ 38.352621] [<ffffffff8153a585>] set_all_monitor_traces+0x105/0x170 [ 38.352625] [<ffffffff8153a8ca>] net_dm_cmd_trace+0x2a/0x40 [ 38.352630] [<ffffffff8154a81a>] genl_rcv_msg+0x21a/0x2b0 [ 38.352636] [<ffffffff810f8029>] ? zone_statistics+0x99/0xc0 [ 38.352640] [<ffffffff8154a600>] ? genl_rcv+0x30/0x30 [ 38.352645] [<ffffffff8154a059>] netlink_rcv_skb+0xa9/0xd0 [ 38.352649] [<ffffffff8154a5f0>] genl_rcv+0x20/0x30 [ 38.352653] [<ffffffff81549a7e>] netlink_unicast+0x1ae/0x1f0 [ 38.352658] [<ffffffff81549d76>] netlink_sendmsg+0x2b6/0x310 [ 38.352663] [<ffffffff8150824f>] sock_sendmsg+0x10f/0x130 [ 38.352668] [<ffffffff8150abe0>] ? move_addr_to_kernel+0x60/0xb0 [ 38.352673] [<ffffffff81515f04>] ? verify_iovec+0x64/0xe0 [ 38.352677] [<ffffffff81509c46>] __sys_sendmsg+0x386/0x390 [ 38.352682] [<ffffffff810ffaf9>] ? handle_mm_fault+0x139/0x210 [ 38.352687] [<ffffffff8165b5bc>] ? do_page_fault+0x1ec/0x4f0 [ 38.352693] [<ffffffff8106ba4d>] ? set_next_entity+0x9d/0xb0 [ 38.352699] [<ffffffff81310b49>] ? tty_ldisc_deref+0x9/0x10 [ 38.352703] [<ffffffff8106d363>] ? pick_next_task_fair+0x63/0x140 [ 38.352708] [<ffffffff8150b8d4>] sys_sendmsg+0x44/0x80 [ 38.352713] [<ffffffff8165f8e2>] system_call_fastpath+0x16/0x1b It stems from holding a spinlock (trace_state_lock) while attempting to register or unregister tracepoint hooks, making in_atomic() true in this context, leading to the warning when the tracepoint calls might_sleep() while its taking a mutex. Since we only use the trace_state_lock to prevent trace protocol state races, as well as hardware stat list updates on an rcu write side, we can just convert the spinlock to a mutex to avoid this problem. Signed-off-by:
-
Jarod Wilson authored
commit 4b71ca6b upstream. For one, the driver device pointer needs to be filled in, or the lirc core will refuse to load the driver. And we really need to wire up all the platform_device bits. This has been tested via the lirc sourceforge tree and verified to work, been sitting there for months, finally getting around to sending it. :\ Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
commit 8323f26c upstream. Stefan reported a crash on a kernel before a3e5d109 ("sched: Don't call task_group() too many times in set_task_rq()"), he found the reason to be that the multiple task_group() invocations in set_task_rq() returned different values. Looking at all that I found a lack of serialization and plain wrong comments. The below tries to fix it using an extra pointer which is updated under the appropriate scheduler locks. Its not pretty, but I can't really see another way given how all the cgroup stuff works. Reported-and-tested-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Thomas Renninger authored
commit c4686c71 upstream. Commit d640113f introduced a regression on SMP systems where the processor core with ACPI id zero is disabled (typically should be the case because of hyperthreading). The regression got spread through stable kernels. On 3.0.X it got introduced via 3.0.18. Such platforms may be rare, but do exist. Look out for a disabled processor with acpi_id 0 in dmesg: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] disabled) This problem has been observed on a: HP Proliant BL280c G6 blade This patch restricts the introduced workaround to platforms with nr_cpu_ids <= 1. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Daniel J Blueman authored
commit c531077f upstream. When using my Seagate FreeAgent GoFlex eSATAp external disk enclosure, interface errors are always seen until 1.5Gbps is negotiated [1]. This occurs using any disk in the enclosure, and when the disk is connected directly with a generic passive eSATAp cable, we see stable 3Gbps operation as expected. Blacklist 3Gbps mode to avoid dataloss and the ~30s delay bus reset and renegotiation incurs. Signed-off-by:
Daniel J Blueman <daniel@quora.org> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Weiping Pan authored
commit 06b6a1cf upstream. Jay Fenlason (fenlason@redhat.com) found a bug, that recvfrom() on an RDS socket can return the contents of random kernel memory to userspace if it was called with a address length larger than sizeof(struct sockaddr_in). rds_recvmsg() also fails to set the addr_len paramater properly before returning, but that's just a bug. There are also a number of cases wher recvfrom() can return an entirely bogus address. Anything in rds_recvmsg() that returns a non-negative value but does not go through the "sin = (struct sockaddr_in *)msg->msg_name;" code path at the end of the while(1) loop will return up to 128 bytes of kernel memory to userspace. And I write two test programs to reproduce this bug, you will see that in rds_server, fromAddr will be overwritten and the following sock_fd will be destroyed. Yes, it is the programmer's fault to set msg_namelen incorrectly, but it is better to make the kernel copy the real length of address to user space in such case. How to run the test programs ? I test them on 32bit x86 system, 3.5.0-rc7. 1 compile gcc -o rds_client rds_client.c gcc -o rds_server rds_server.c 2 run ./rds_server on one console 3 run ./rds_client on another console 4 you will see something like: server is waiting to receive data... old socket fd=3 server received data from client:data from client msg.msg_namelen=32 new socket fd=-1067277685 sendmsg() : Bad file descriptor /***************** rds_client.c ********************/ int main(void) { int sock_fd; struct sockaddr_in serverAddr; struct sockaddr_in toAddr; char recvBuffer[128] = "data from client"; struct msghdr msg; struct iovec iov; sock_fd = socket(AF_RDS, SOCK_SEQPACKET, 0); if (sock_fd < 0) { perror("create socket error\n"); exit(1); } memset(&serverAddr, 0, sizeof(serverAddr)); serverAddr.sin_family = AF_INET; serverAddr.sin_addr.s_addr = inet_addr("127.0.0.1"); serverAddr.sin_port = htons(4001); if (bind(sock_fd, (struct sockaddr*)&serverAddr, sizeof(serverAddr)) < 0) { perror("bind() error\n"); close(sock_fd); exit(1); } memset(&toAddr, 0, sizeof(toAddr)); toAddr.sin_family = AF_INET; toAddr.sin_addr.s_addr = inet_addr("127.0.0.1"); toAddr.sin_port = htons(4000); msg.msg_name = &toAddr; msg.msg_namelen = sizeof(toAddr); msg.msg_iov = &iov; msg.msg_iovlen = 1; msg.msg_iov->iov_base = recvBuffer; msg.msg_iov->iov_len = strlen(recvBuffer) + 1; msg.msg_control = 0; msg.msg_controllen = 0; msg.msg_flags = 0; if (sendmsg(sock_fd, &msg, 0) == -1) { perror("sendto() error\n"); close(sock_fd); exit(1); } printf("client send data:%s\n", recvBuffer); memset(recvBuffer, '\0', 128); msg.msg_name = &toAddr; msg.msg_namelen = sizeof(toAddr); msg.msg_iov = &iov; msg.msg_iovlen = 1; msg.msg_iov->iov_base = recvBuffer; msg.msg_iov->iov_len = 128; msg.msg_control = 0; msg.msg_controllen = 0; msg.msg_flags = 0; if (recvmsg(sock_fd, &msg, 0) == -1) { perror("recvmsg() error\n"); close(sock_fd); exit(1); } printf("receive data from server:%s\n", recvBuffer); close(sock_fd); return 0; } /***************** rds_server.c ********************/ int main(void) { struct sockaddr_in fromAddr; int sock_fd; struct sockaddr_in serverAddr; unsigned int addrLen; char recvBuffer[128]; struct msghdr msg; struct iovec iov; sock_fd = socket(AF_RDS, SOCK_SEQPACKET, 0); if(sock_fd < 0) { perror("create socket error\n"); exit(0); } memset(&serverAddr, 0, sizeof(serverAddr)); serverAddr.sin_family = AF_INET; serverAddr.sin_addr.s_addr = inet_addr("127.0.0.1"); serverAddr.sin_port = htons(4000); if (bind(sock_fd, (struct sockaddr*)&serverAddr, sizeof(serverAddr)) < 0) { perror("bind error\n"); close(sock_fd); exit(1); } printf("server is waiting to receive data...\n"); msg.msg_name = &fromAddr; /* * I add 16 to sizeof(fromAddr), ie 32, * and pay attention to the definition of fromAddr, * recvmsg() will overwrite sock_fd, * since kernel will copy 32 bytes to userspace. * * If you just use sizeof(fromAddr), it works fine. * */ msg.msg_namelen = sizeof(fromAddr) + 16; /* msg.msg_namelen = sizeof(fromAddr); */ msg.msg_iov = &iov; msg.msg_iovlen = 1; msg.msg_iov->iov_base = recvBuffer; msg.msg_iov->iov_len = 128; msg.msg_control = 0; msg.msg_controllen = 0; msg.msg_flags = 0; while (1) { printf("old socket fd=%d\n", sock_fd); if (recvmsg(sock_fd, &msg, 0) == -1) { perror("recvmsg() error\n"); close(sock_fd); exit(1); } printf("server received data from client:%s\n", recvBuffer); printf("msg.msg_namelen=%d\n", msg.msg_namelen); printf("new socket fd=%d\n", sock_fd); strcat(recvBuffer, "--data from server"); if (sendmsg(sock_fd, &msg, 0) == -1) { perror("sendmsg()\n"); close(sock_fd); exit(1); } } close(sock_fd); return 0; } Signed-off-by:
Weiping Pan <wpan@redhat.com> Signed-off-by:
-
Li Zhong authored
[Fixed upstream by commits 2955b47d and a4683487 from Dan Williams, but they are much more intrusive than this tiny fix, according to Andrew - gregkh] This patch tries to fix a dead loop in async_synchronize_full(), which could be seen when preemption is disabled on a single cpu machine. void async_synchronize_full(void) { do { async_synchronize_cookie(next_cookie); } while (!list_empty(&async_running) || ! list_empty(&async_pending)); } async_synchronize_cookie() calls async_synchronize_cookie_domain() with &async_running as the default domain to synchronize. However, there might be some works in the async_pending list from other domains. On a single cpu system, without preemption, there is no chance for the other works to finish, so async_synchronize_full() enters a dead loop. It seems async_synchronize_full() wants to synchronize all entries in all running lists(domains), so maybe we could just check the entry_count to know whether all works are finished. Currently, async_synchronize_cookie_domain() expects a non-NULL running list ( if NULL, there would be NULL pointer dereference ), so maybe a NULL pointer could be used as an indication for the functions to synchronize all works in all domains. Reported-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Li Zhong <zhong@linux.vnet.ibm.com> Tested-by:
Christian Kujau <lists@nerdbynature.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Williams <dan.j.williams@gmail.com> Cc: Christian Kujau <lists@nerdbynature.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Rustad, Mark D authored
commit 734b6541 upstream. This change eliminates an initialization-order hazard most recently seen when netprio_cgroup is built into the kernel. With thanks to Eric Dumazet for catching a bug. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Acked-by:
-
Henrik Rydberg authored
commit 1fa6535f upstream. As pointed out by Gustavo and Marcel, all Apple-specific Broadcom devices seen so far have the same interface class, subclass and protocol numbers. This patch adds an entry which matches all of them, using the new USB_VENDOR_AND_INTERFACE_INFO() macro. In particular, this patch adds support for the MacBook Pro Retina (05ac:8286), which is not in the present list. Signed-off-by:
Henrik Rydberg <rydberg@euromail.se> Tested-by:
Shea Levy <shea@shealevy.com> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
-
Gustavo Padovan authored
commit 92c385f4 upstream. Many Broadcom devices has a vendor specific devices class, with this rule we match all existent and future controllers with this behavior. We also remove old rules to that matches product id for Broadcom devices. Tested-by:
John Hommel <john.hommel@hp.com> Signed-off-by:
-
Manoj Iyer authored
commit 61c964ba upstream. Patch adds support for BCM20702A0 device id (0a5c:21f4). usb-devices after patch was applied: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21f4 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=E4D53DF154D6 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) usb-devices before patch was applied: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21f4 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=E4D53DF154D6 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
Manoj Iyer <manoj.iyer@canonical.com> Tested-by:
Chris Gagnon <chris.gagnon@canonical.com> Signed-off-by:
-
Alan Cox authored
commit 80b3e557 upstream. Despite lots of investigation into why this is needed we don't know or have an elegant cure. The only answer found on this laptop is to mark a problem region as used so that Linux doesn't put anything there. Currently all the users add reserve= command lines and anyone not knowing this needs to find the magic page that documents it. Automate it instead. Signed-off-by:
Arne Fitzenreiter <arne@fitzenreiter.de> Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=10231 Link: http://lkml.kernel.org/r/20120515174347.5109.94551.stgit@bluebookSigned-off-by:
-
Lai Jiangshan authored
commit 96e65306 upstream. The compiler may compile the following code into TWO write/modify instructions. worker->flags &= ~WORKER_UNBOUND; worker->flags |= WORKER_REBIND; so the other CPU may temporarily see worker->flags which doesn't have either WORKER_UNBOUND or WORKER_REBIND set and perform local wakeup prematurely. Fix it by using single explicit assignment via ACCESS_ONCE(). Because idle workers have another WORKER_NOT_RUNNING flag, this bug doesn't exist for them; however, update it to use the same pattern for consistency. tj: Applied the change to idle workers too and updated comments and patch description a bit. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Wang Xingchao authored
commit b98b6016 upstream. Clear Audio Enable bit to trigger unsolicated event to notify Audio Driver part the HDMI hot plug change. The patch fixed the bug when remove HDMI cable the bit was not cleared correctly. In intel_hdmi_dpms(), if intel_hdmi->has_audio been true, the "Audio enable bit" will be set to trigger unsolicated event to notify Alsa driver the change. intel_hdmi->has_audio will be reset to false from intel_hdmi_detect() after remove the hdmi cable, here's debug log: [ 187.494153] [drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 1 to 2 [ 187.525349] [drm:intel_hdmi_detect], HDMI: has_audio = 0 so when comes back to intel_hdmi_dpms(), the "Audio enable bit" will not be cleared. And this cause the eld infomation and pin presence doesnot update accordingly in alsa driver side. This patch will also trigger unsolicated event to alsa driver to notify the hot plug event: [ 187.853159] ALSA sound/pci/hda/patch_hdmi.c:772 HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1 [ 187.853268] ALSA sound/pci/hda/patch_hdmi.c:990 HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 Signed-off-by:
Wang Xingchao <xingchao.wang@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
AceLan Kao authored
commit 3766054f upstream. There are some new video switch keys that used by newer machines. 0xA0 - SDSP HDMI only 0xA1 - SDSP LCD + HDMI 0xA2 - SDSP CRT + HDMI 0xA3 - SDSP TV + HDMI But in Linux, there is no suitable userspace application to handle this, so, mapping them all to KEY_SWITCHVIDEOMODE. Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com> Cc: Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
-
