- 15 Mar, 2016 40 commits
-
-
Ard Biesheuvel authored
commit 36e5cd6b upstream. Commit dfd55ad8 ("arm64: vmemmap: use virtual projection of linear region") fixed an issue where the struct page array would overflow into the adjacent virtual memory region if system RAM was placed so high up in physical memory that its addresses were not representable in the build time configured virtual address size. However, the fix failed to take into account that the vmemmap region needs to be relatively aligned with respect to the sparsemem section size, so that a sequence of page structs corresponding with a sparsemem section in the linear region appears naturally aligned in the vmemmap region. So round up vmemmap to sparsemem section size. Since this essentially moves the projection of the linear region up in memory, also revert the reduction of the size of the vmemmap region. Fixes: dfd55ad8 ("arm64: vmemmap: use virtual projection of linear region") Tested-by:
Mark Langsdorf <mlangsdo@redhat.com> Tested-by:
David Daney <david.daney@cavium.com> Tested-by:
Robert Richter <rrichter@cavium.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Radim Krčmář authored
commit 7099e2e1 upstream. Linux guests on Haswell (and also SandyBridge and Broadwell, at least) would crash if you decided to run a host command that uses PEBS, like perf record -e 'cpu/mem-stores/pp' -a This happens because KVM is using VMX MSR switching to disable PEBS, but SDM [2015-12] 18.4.4.4 Re-configuring PEBS Facilities explains why it isn't safe: When software needs to reconfigure PEBS facilities, it should allow a quiescent period between stopping the prior event counting and setting up a new PEBS event. The quiescent period is to allow any latent residual PEBS records to complete its capture at their previously specified buffer address (provided by IA32_DS_AREA). There might not be a quiescent period after the MSR switch, so a CPU ends up using host's MSR_IA32_DS_AREA to access an area in guest's memory. (Or MSR switching is just buggy on some models.) The guest can learn something about the host this way: If the guest doesn't map address pointed by MSR_IA32_DS_AREA, it results in #PF where we leak host's MSR_IA32_DS_AREA through CR2. After that, a malicious guest can map and configure memory where MSR_IA32_DS_AREA is pointing and can therefore get an output from host's tracing. This is not a critical leak as the host must initiate with PEBS tracing and I have not been able to get a record from more than one instruction before vmentry in vmx_vcpu_run() (that place has most registers already overwritten with guest's). We could disable PEBS just few instructions before vmentry, but disabling it earlier shouldn't affect host tracing too much. We also don't need to switch MSR_IA32_PEBS_ENABLE on VMENTRY, but that optimization isn't worth its code, IMO. (If you are implementing PEBS for guests, be sure to handle the case where both host and guest enable PEBS, because this patch doesn't.) Fixes: 26a4f3c0 ("perf/x86: disable PEBS on a guest entry.") Reported-by:
Jiří Olša <jolsa@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Al Viro authored
commit f9381284 upstream. d_instantiate(new_dentry, old_inode) is absolutely wrong thing to do - it will oops if new_dentry used to be positive, for starters. What we need is d_invalidate() the target and be done with that. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
commit 803c0012 upstream. Failing to allocate an inode for child means that cache for *parent* is incompletely populated. So it's parent directory inode ('dir') that needs NCPI_DIR_CACHE flag removed, *not* the child inode ('inode', which is what we'd failed to allocate in the first place). Fucked-up-in: commit 5e993e25 ("ncpfs: get rid of d_validate() nonsense") Fucked-up-by:
-
Paul Mackerras authored
commit ccec4456 upstream. Thomas Huth discovered that a guest could cause a hard hang of a host CPU by setting the Instruction Authority Mask Register (IAMR) to a suitable value. It turns out that this is because when the code was added to context-switch the new special-purpose registers (SPRs) that were added in POWER8, we forgot to add code to ensure that they were restored to a sane value on guest exit. This adds code to set those registers where a bad value could compromise the execution of the host kernel to a suitable neutral value on guest exit. Fixes: b005255eReported-by:
Thomas Huth <thuth@redhat.com> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Linus Torvalds authored
commit 256faedc upstream. This reverts commit dbb17a21. It turns out that commit can cause problems for systems with multiple GPUs, and causes X to hang on at least a HP Pavilion dv7 with hybrid graphics. This got noticed originally in 4.4.4, where this patch had already gotten back-ported, but 4.5-rc7 was verified to have the same problem. Alexander Deucher says: "It looks like you have a muxed system so I suspect what's happening is that one of the display is being reported as connected for both the IGP and the dGPU and then the desktop environment gets confused or there some sort problem in the detect functions since the mux is not switched to the dGPU. I don't see an easy fix unless Dave has any ideas. I'd say just revert for now" Reported-by:
Jörg-Volker Peetz <jvpeetz@web.de> Acked-by:
Alexander Deucher <Alexander.Deucher@amd.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Krzysztof =?utf-8?Q?Ha=C5=82asa?= authored
commit 54c6e2dd upstream. pci_create_root_bus() passes a "parent" pointer to pci_bus_assign_domain_nr(). When CONFIG_PCI_DOMAINS_GENERIC is defined, pci_bus_assign_domain_nr() dereferences that pointer. Many callers of pci_create_root_bus() supply a NULL "parent" pointer, which leads to a NULL pointer dereference error. 7c674700 ("PCI: Move domain assignment from arm64 to generic code") moved the "parent" dereference from arm64 to generic code. Only arm64 used that code (because only arm64 defined CONFIG_PCI_DOMAINS_GENERIC), and it always supplied a valid "parent" pointer. Other arches supplied NULL "parent" pointers but didn't defined CONFIG_PCI_DOMAINS_GENERIC, so they used a no-op version of pci_bus_assign_domain_nr(). 8c7d1474 ("ARM/PCI: Move to generic PCI domains") defined CONFIG_PCI_DOMAINS_GENERIC on ARM, and many ARM platforms use pci_common_init(), which supplies a NULL "parent" pointer. These platforms (cns3xxx, dove, footbridge, iop13xx, etc.) crash with a NULL pointer dereference like this while probing PCI: Unable to handle kernel NULL pointer dereference at virtual address 000000a4 PC is at pci_bus_assign_domain_nr+0x10/0x84 LR is at pci_create_root_bus+0x48/0x2e4 Kernel panic - not syncing: Attempted to kill init! [bhelgaas: changelog, add "Reported:" and "Fixes:" tags] Reported: http://forum.doozan.com/read.php?2,17868,22070,quote=1 Fixes: 8c7d1474 ("ARM/PCI: Move to generic PCI domains") Fixes: 7c674700 ("PCI: Move domain assignment from arm64 to generic code") Signed-off-by:
Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
-
Mugunthan V N authored
commit 0f514e69 upstream. Errata id: i877 Description: ------------ The RGMII 1000 Mbps Transmit timing is based on the output clock (rgmiin_txc) being driven relative to the rising edge of an internal clock and the output control/data (rgmiin_txctl/txd) being driven relative to the falling edge of an internal clock source. If the internal clock source is allowed to be static low (i.e., disabled) for an extended period of time then when the clock is actually enabled the timing delta between the rising edge and falling edge can change over the lifetime of the device. This can result in the device switching characteristics degrading over time, and eventually failing to meet the Data Manual Delay Time/Skew specs. To maintain RGMII 1000 Mbps IO Timings, SW should minimize the duration that the Ethernet internal clock source is disabled. Note that the device reset state for the Ethernet clock is "disabled". Other RGMII modes (10 Mbps, 100Mbps) are not affected Workaround: ----------- If the SoC Ethernet interface(s) are used in RGMII mode at 1000 Mbps, SW should minimize the time the Ethernet internal clock source is disabled to a maximum of 200 hours in a device life cycle. This is done by enabling the clock as early as possible in IPL (QNX) or SPL/u-boot (Linux/Android) by setting the register CM_GMAC_CLKSTCTRL[1:0]CLKTRCTRL = 0x2:SW_WKUP. So, do not allow to gate the cpsw clocks using ti,no-idle property in cpsw node assuming 1000 Mbps is being used all the time. If someone does not need 1000 Mbps and wants to gate clocks to cpsw, this property needs to be deleted in their respective board files. Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
-
Lokesh Vutla authored
commit 2e18f5a1 upstream. Introduce a dt property, ti,no-idle, that prevents an IP to idle at any point. This is to handle Errata i877, which tells that GMAC clocks cannot be disabled. Acked-by:
Roger Quadros <rogerq@ti.com> Tested-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 7f54ab5f upstream. This patch fixes a recent ABORT_TASK regression associated with commit febe562c, where a left-over target_put_sess_cmd() would still be called when __target_check_io_state() detected a command has already been completed, and explicit ABORT must be avoided. Note commit febe562c dropped the local kref_get_unless_zero() check in core_tmr_abort_task(), but did not drop this extra corresponding target_put_sess_cmd() in the failure path. So go ahead and drop this now bogus target_put_sess_cmd(), and avoid this potential use-after-free. Reported-by:
Dan Lane <dracodan@gmail.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Richard Weinberger authored
commit e4f6daac upstream. ubi_start_leb_change() allocates too few bytes. ubi_more_leb_change_data() will write up to req->upd_bytes + ubi->min_io_size bytes. Signed-off-by:
Richard Weinberger <richard@nod.at> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Maciej W. Rozycki authored
commit e723e3f7 upstream. Avoid sending a partially initialised `siginfo_t' structure along SIGFPE signals issued from `do_ov' and `do_trap_or_bp', leading to information leaking from the kernel stack. Signed-off-by:
Maciej W. Rozycki <macro@imgtec.com> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Konstantin Khlebnikov authored
commit b81de061 upstream. Overlayfs must update uid/gid after chown, otherwise functions like inode_owner_or_capable() will check user against stale uid. Catched by xfstests generic/087, it chowns file and calls utimes. Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Konstantin Khlebnikov authored
commit 45d11738 upstream. After rename file dentry still holds reference to lower dentry from previous location. This doesn't matter for data access because data comes from upper dentry. But this stale lower dentry taints dentry at new location and turns it into non-pure upper. Such file leaves visible whiteout entry after remove in directory which shouldn't have whiteouts at all. Overlayfs already tracks pureness of file location in oe->opaque. This patch just uses that for detecting actual path type. Comment from Vivek Goyal's patch: Here are the details of the problem. Do following. $ mkdir upper lower work merged upper/dir/ $ touch lower/test $ sudo mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir= work merged $ mv merged/test merged/dir/ $ rm merged/dir/test $ ls -l merged/dir/ /usr/bin/ls: cannot access merged/dir/test: No such file or directory total 0 c????????? ? ? ? ? ? test Basic problem seems to be that once a file has been unlinked, a whiteout has been left behind which was not needed and hence it becomes visible. Whiteout is visible because parent dir is of not type MERGE, hence od->is_real is set during ovl_dir_open(). And that means ovl_iterate() passes on iterate handling directly to underlying fs. Underlying fs does not know/filter whiteouts so it becomes visible to user. Why did we leave a whiteout to begin with when we should not have. ovl_do_remove() checks for OVL_TYPE_PURE_UPPER() and does not leave whiteout if file is pure upper. In this case file is not found to be pure upper hence whiteout is left. So why file was not PURE_UPPER in this case? I think because dentry is still carrying some leftover state which was valid before rename. For example, od->numlower was set to 1 as it was a lower file. After rename, this state is not valid anymore as there is no such file in lower. Signed-off-by:
Viktor Stanchev <me@viktorstanchev.com> Suggested-by:
Vivek Goyal <vgoyal@redhat.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=109611Acked-by:
-
Rui Wang authored
commit ce9113bb upstream. ovl_remove_upper() should do d_drop() only after it successfully removes the dir, otherwise a subsequent getcwd() system call will fail, breaking userspace programs. This is to fix: https://bugzilla.kernel.org/show_bug.cgi?id=110491Signed-off-by:
Rui Wang <rui.y.wang@intel.com> Reviewed-by:
-
Konstantin Khlebnikov authored
commit b5891cfa upstream. This adds missing .d_select_inode into alternative dentry_operations. Signed-off-by:
Nikolay Borisov <kernel@kyup.com> Tested-by:
-
Simon South authored
commit 02322ac9 upstream. This patch applies the microphone-related fix created for the Acer Aspire E1-572 to the E1-472 as well, as it uses the same Realtek ALC282 CODEC and demonstrates the same issues. This patch allows an external, headset microphone to be used and limits the gain on the (quite noisy) internal microphone. Signed-off-by:
Simon South <simon@simonsouth.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Todd E Brandt authored
commit 92f9e179 upstream. Pause/unpause graph tracing around do_suspend_lowlevel as it has inconsistent call/return info after it jumps to the wakeup vector. The graph trace buffer will otherwise become misaligned and may eventually crash and hang on suspend. To reproduce the issue and test the fix: Run a function_graph trace over suspend/resume and set the graph function to suspend_devices_and_enter. This consistently hangs the system without this fix. Signed-off-by:
Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Arindam Nath authored
commit 0b39c531 upstream. In amdgpu_connector_hotplug(), we need to start DP link training only after we have received DPCD. The function amdgpu_atombios_dp_get_dpcd() returns non-zero value only when an error condition is met, otherwise returns zero. So in case the function encounters an error, we need to skip rest of the code and return from amdgpu_connector_hotplug() immediately. Only when we are successfull in reading DPCD pin, we should carry on with turning-on the monitor. Signed-off-by:
Arindam Nath <arindam.nath@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 5e031d9f upstream. On CI, we need to see if the number of crtcs changes to determine whether or not we need to upload the mclk table again. In practice we don't currently upload the mclk table again after the initial load. The only reason you would would be to add new states, e.g., for arbitrary mclk setting which is not currently supported. Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
commit eda1d1cf upstream. On CI, we need to see if the number of crtcs changes to determine whether or not we need to upload the mclk table again. In practice we don't currently upload the mclk table again after the initial load. The only reason you would would be to add new states, e.g., for arbitrary mclk setting which is not currently supported. Acked-by:
Jordan Lazare <Jordan.Lazare@amd.com> Acked-by:
-
Bjørn Mork authored
commit 04fdbc82 upstream. The MC74xx and EM74xx modules use different IDs by default, according to the Lenovo EM7455 driver for Windows. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Timothy Pearson authored
commit 2d02b8bd upstream. During DRAM initialization on certain ASpeed devices, an incorrect bit (bit 10) was checked in the "SDRAM Bus Width Status" register to determine DRAM width. Query bit 6 instead in accordance with the Aspeed AST2050 datasheet v1.05. Signed-off-by:
Timothy Pearson <tpearson@raptorengineeringinc.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Helge Deller authored
commit 98e8b6c9 upstream. Mike Frysinger reported that his ptrace testcase showed strange behaviour on parisc: It was not possible to avoid a syscall and the return value of a syscall couldn't be changed. To modify a syscall number, we were missing to save the new syscall number to gr20 which is then picked up later in assembly again. The effect that the return value couldn't be changed is a side-effect of another bug in the assembly code. When a process is ptraced, userspace expects each syscall to report entrance and exit of a syscall. If a syscall number was given which doesn't exist, we jumped to the normal syscall exit code instead of informing userspace that the (non-existant) syscall exits. This unexpected behaviour confuses userspace and thus the bug was misinterpreted as if we can't change the return value. This patch fixes both problems and was tested on 64bit kernel with 32bit userspace. Signed-off-by:
Helge Deller <deller@gmx.de> Cc: Mike Frysinger <vapier@gentoo.org> Tested-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Takashi Iwai authored
commit 197b958c upstream. The OSS sequencer client tries to drain the pending events at releasing. Unfortunately, as spotted by syzkaller fuzzer, this may lead to an unkillable process state when the event has been queued at the far future. Since the process being released can't be signaled any longer, it remains and waits for the echo-back event in that far future. Back to history, the draining feature was implemented at the time we misinterpreted POSIX definition for blocking file operation. Actually, such a behavior is superfluous at release, and we should just release the device as is instead of keeping it up forever. This patch just removes the draining call that may block the release for too long time unexpectedly. BugLink: http://lkml.kernel.org/r/CACT4Y+Y4kD-aBGj37rf-xBw9bH3GMU6P+MYg4W1e-s-paVD2pg@mail.gmail.comReported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Wolfram Sang authored
commit 7314d22a upstream. We want the size of the struct, not of a pointer to it. To be future proof, just dereference the pointer to get the desired type. Fixes: dd1aa252 ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver") Acked-by:
Gregory Fong <gregory.0xf0@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Jouni Malinen authored
commit 1ec7bae8 upstream. Public Action frames use special rules for how the BSSID field (Address 3) is set. A wildcard BSSID is used in cases where the transmitter and recipient are not members of the same BSS. As such, we need to accept Public Action frames with wildcard BSSID. Commit db8e1732 ("mac80211: ignore frames between TDLS peers when operating as AP") added a rule that drops Action frames to TDLS-peers based on an Action frame having different DA (Address 1) and BSSID (Address 3) values. This is not correct since it misses the possibility of BSSID being a wildcard BSSID in which case the Address 1 would not necessarily match. Fix this by allowing mac80211 to accept wildcard BSSID in an Action frame when in AP mode. Fixes: db8e1732 ("mac80211: ignore frames between TDLS peers when operating as AP") Signed-off-by:
Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
commit 9acc54be upstream. Just like for CCMP we need to check that for GCMP the fragments have PNs that increment by one; the spec was updated to fix this security issue and now has the following text: The receiver shall discard MSDUs and MMPDUs whose constituent MPDU PN values are not incrementing in steps of 1. Adapt the code for CCMP to work for GCMP as well, luckily the relevant fields already alias each other so no code duplication is needed (just check the aliasing with BUILD_BUG_ON.) Signed-off-by:
-
Dennis Kadioglu authored
commit 17e2df46 upstream. Plantronics DA45 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x4" and "cannot get freq at ep 0x84". This patch adds the USB ID of the DA45 to quirks.c and avoids those error messages. Signed-off-by:
Dennis Kadioglu <denk@post.com> Signed-off-by:
-
Yegor Yefremov authored
commit c0992d0f upstream. Add support for Quectel UC20 and blacklist the QMI interface. Signed-off-by:
Yegor Yefremov <yegorslists@googlemail.com> [johan: amend commit message ] Signed-off-by:
-
Daniele Palmas authored
commit 5deef555 upstream. This patch adds support for 0x1045 PID of Telit LE922. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit 15c66570 upstream. The firmware ctls like "DSP1 Firmware" in wm_adsp codec driver are enum, while the current driver accesses wrongly via value.integer.value[]. They have to be via value.enumerated.item[] instead. Signed-off-by:
Mark Brown <broonie@kernel.org> [ kamal: backport to 4.2-stable: context ] Signed-off-by:
-
Takashi Iwai authored
commit 8019c0b3 upstream. The DRC Mode like "AIF1DRC1 Mode" and EQ Mode like "AIF1.1 EQ Mode" in wm8994 codec driver are enum ctls, while the current driver accesses wrongly via value.integer.value[]. They have to be via value.enumerated.item[] instead. Signed-off-by:
-
Takashi Iwai authored
commit d0784829 upstream. "MBC Mode", "VSS Mode", "VSS HPF Mode" and "Enhanced EQ Mode" ctls in wm8958 codec driver are enum, while the current driver accesses wrongly via value.integer.value[]. They have to be via value.enumerated.item[] instead. Signed-off-by:
-
Takashi Iwai authored
commit 741338f9 upstream. snd_soc_dapm_dai_link_get() and _put() access the associated ctl values as value.integer.value[]. However, this is an enum ctl, and it has to be accessed via value.enumerated.item[]. The former is long while the latter is unsigned int, so they don't align. Fixes: c6615082 ('ASoC: dapm: add code to configure dai link parameters') Signed-off-by:
-
Vittorio Alfieri authored
commit 3c4c615d upstream. The Parrot NMEA GPS Flight Recorder is a USB composite device consisting of hub, flash storage, and cp210x usb to serial chip. It is an accessory to the mass-produced Parrot AR Drone 2. The device emits standard NMEA messages which make the it compatible with NMEA compatible software. It was tested using gpsd version 3.11-3 as an NMEA interpreter and using the official Parrot Flight Recorder. Signed-off-by:
Vittorio Alfieri <vittorio88@gmail.com> Signed-off-by:
-
Patrik Halfar authored
commit 013dd239 upstream. New revision of Dell Wireless 5809e Gobi 4G HSPA+ Mobile Broadband Card has new idProduct. Bus 002 Device 006: ID 413c:81b3 Dell Computer Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x413c Dell Computer Corp. idProduct 0x81b3 bcdDevice 0.06 iManufacturer 1 Sierra Wireless, Incorporated iProduct 2 Dell Wireless 5809e Gobi
™ 4G HSPA+ Mobile Broadband Card iSerial 3 bNumConfigurations 2 Signed-off-by:Patrik Halfar <patrik_halfar@halfarit.cz> Signed-off-by:
-
Al Viro authored
commit a528aca7 upstream. Games with ordering and barriers are way too brittle. Just bump ->d_seq before and after updating ->d_inode and ->d_flags type bits, so that verifying ->d_seq would guarantee they are coherent. Signed-off-by:
-
Takashi Iwai authored
commit eab3c4db upstream. snd-hdsp driver accesses enum item values (int) instead of boolean values (long) wrongly for some ctl elements. This patch fixes them. Signed-off-by:
-
Takashi Iwai authored
commit c1099c32 upstream. HDSPM driver contains a code issuing zero-division potentially in system sample rate ctl code. This patch fixes it by not processing a zero or invalid rate value as a divisor, as well as excluding the invalid value to be passed via the given ctl element. Signed-off-by:
-
