- 26 Jul, 2011 40 commits
-
-
Dmitry Eremin-Solenikov authored
MPC5200B contains a limited version of RTC from MPC5121. Add support for the RTC on that CPU. Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Anatolij Gustschin <agust@denx.de> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sameer Nanda authored
For each CPU, do the calibration delay only once. For subsequent calls, use the cached per-CPU value of loops_per_jiffy. This saves about 200ms of resume time on dual core Intel Atom N5xx based systems. This helps bring down the kernel resume time on such systems from about 500ms to about 300ms. [akpm@linux-foundation.org: make cpu_loops_per_jiffy static] [akpm@linux-foundation.org: clean up message text] [akpm@linux-foundation.org: fix things up after upstream rmk changes] Signed-off-by:
Sameer Nanda <snanda@chromium.org> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Andrew Worsley <amworsley@gmail.com> Cc: David Daney <ddaney@caviumnetworks.com> Signed-off-by:
-
Anatolij Gustschin authored
Both displays on digsy_mtc board obtain their configuration from microwire EEPROMs which are connected to the SoC over GPIO lines. We need an easy way to access the EEPROMs to write the needed display configuration or to read out the currently programmed configuration. The generic eeprom_93xx46 SPI driver added by previous patch allows EEPROM access over sysfs. Using the simple driver added by this patch we provide used GPIO interface and access control description on the board for generic eeprom_93xx46 driver and spi_gpio driver. Signed-off-by:
Anatolij Gustschin <agust@denx.de> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Anatolij Gustschin authored
Add EEPROM driver for 93xx46 chips. It can also be used with spi_gpio driver to access 93xx46 EEPROMs connected over GPIO lines. This driver supports read/write/erase access to the EEPROM chips over sysfs files. [rdunlap@xenotime.net: fix printk format] Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Joe Perches authored
Previous behavior allowed only alphabetic prefixes like pr_info to exceed the 80 column line length limit. ath6kl wants to add a digit into the prefix, so allow numbers as well as digits in the <prefix>_<level> printks. <prefix>_<level>_ratelimited and <prefix>_<level>_once and WARN_RATELIMIT and WARN_ONCE may now exceed 80 cols. Add missing <prefix>_printk type for completeness. Signed-off-by:
Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Joe Perches authored
Some patches are sent in using ISO-8859 or even Windows codepage 1252. Make checkpatch accept these by default and only emit the "Invalid UTF-8" message when using --strict. Signed-off-by:
-
Joe Perches authored
Some users would like the ability to not emit some of the messages that checkpatch produces. This can make it easier to use checkpatch in other projects and integrate into scm hook scripts. Add command line option to "--ignore" various message types. Add option --show-types to emit the "type" of each message. Categorize all ERROR, WARN and CHK messages with types. Add optional .checkpatch.conf file to store default options. 3 paths are searched for .checkpatch.conf . customized per-tree configurations $HOME user global configuration when per-tree configs don't exist ./scripts lk defaults to override script The .conf file can contain any valid command-line argument and the contents are prepended to any additional command line arguments. Multiple lines may be used, blank lines are ignored, # is a comment. Update "false positive" output for readability. Update version to 0.32 Signed-off-by:Mike Frysinger <vapier@gentoo.org> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Joe Perches authored
Prefer the use of __aligned(size) over __attribute__((__aligned___(size))) Link: http://lkml.kernel.org/r/20110609094526.1571774c.akpm@linux-foundation.orgSuggested-by:
-
Joe Perches authored
Signatures have many forms and can sometimes cause problems if not in the correct format when using git send-email or quilt. Try to verify the signature tags and email addresses to use the generally accepted "Signed-off-by: Full Name <email@domain.tld>" form. Original idea by Anish Kumar <anish198519851985@gmail.com> Signed-off-by:
-
Sven Eckelmann authored
Fix "need consistent spacing around '*'" error after a __rcu sparse annotation which was caused by the missing __rcu entry in the checkpatch.pl internal list of sparse keywords. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
A common issue with min() or max() is using a cast on one or both of the arguments when using min_t/max_t could be better. Add cast detection to uses of min/max and suggest an appropriate use of min_t or max_t instead. Caveat: This only works for min() or max() on a single line. It does not find min() or max() split across multiple lines. This does find: min((u32)foo, bar); But it does not find: max((unsigned long)foo, bar); Suggested-by: -
Randy Dunlap authored
Fix module tainting message: sigma: module license 'unspecified' taints kernel. Signed-off-by:
-
Andy Shevchenko authored
This function is required by *printf and kstrto* functions that are located in the different modules. This patch makes _tolower() public. However, it's good idea to not use the helper outside of mentioned functions. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
H Hartley Sweeten authored
The symbol 'lcm' is exported to the kernel (EXPORT_SYMBOL_GPL). Pick up it's definition in <linux/lcm.h> to quiet the sparse noise: warning: symbol 'lcm' was not declared. Should it be static? Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
Linus Walleij authored
From: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> platform data for simple backlight driver for LM3530 in the u5500 platform Signed-off-by:
Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Lee Jones <lee.jones@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by:
-
Shreshtha Kumar Sahu authored
Provide the support for auto calibration of ALS Zone boundaries based on min/max ALS input voltage. Signed-off-by:
-
Axel Lin authored
We call led_classdev_register/led_classdev_unregister in create_netxbig_led/delete_netxbig_led, thus make LEDS_NETXBIG depend on LEDS_CLASS. This patch fixes below build error if LEDS_CLASS is not configured. LD .tmp_vmlinux1 drivers/built-in.o: In function `create_netxbig_led': drivers/leds/leds-netxbig.c:350: undefined reference to `led_classdev_register' drivers/leds/leds-netxbig.c:361: undefined reference to `led_classdev_unregister' drivers/built-in.o: In function `delete_netxbig_led': drivers/leds/leds-netxbig.c:313: undefined reference to `led_classdev_unregister' Signed-off-by:Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by:
Simon Guinot <sguinot@lacie.com> Signed-off-by:
-
Axel Lin authored
- return -ENOMEM if kzalloc fails, rather than the current -EINVAL - fix a memory leak in the case of goto out_unregister_led_cdevs Signed-off-by:
-
Linus Walleij authored
Tag the and remove() function as __devexit respectively. Signed-off-by:
-
Joe Perches authored
clockchips.h was typoed as clockevents.h Signed-off-by:
-
Joe Perches authored
Entries that used formats other than "Proper Name <commit@email.xx>" were not parsed properly. Try to improve the parsing so that the entries in the forms of: Proper Name <proper@email.xx> <commit@email.xx> and Proper Name <proper@email.xx> Commit Name <commit@email.xx> are transformed correctly. Signed-off-by:Florian Mickler <florian@mickler.org> Signed-off-by:
-
Stephen Boyd authored
If CONFIG_IKCONFIG=m but CONFIG_IKCONFIG_PROC=n we get a module that has no MODULE_LICENSE definition. Move the MODULE_*() definitions outside the CONFIG_IKCONFIG_PROC #ifdef to prevent this configuration from tainting the kernel. Signed-off-by:
Stephen Boyd <bebarino@gmail.com> Acked-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
-
Amerigo Wang authored
It is not necessary to share the same notifier.h. Signed-off-by:
WANG Cong <amwang@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Amerigo Wang authored
It is not necessary to share the same notifier.h. Signed-off-by:
"Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Amerigo Wang authored
It is not necessary to share the same notifier.h. This patch already moves register_reboot_notifier() and unregister_reboot_notifier() from kernel/notifier.c to kernel/sys.c. [amwang@redhat.com: make allyesconfig succeed on ppc64] Signed-off-by:
-
Amerigo Wang authored
It is not necessary to share the same notifier.h. Signed-off-by:
David Miller <davem@davemloft.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Amerigo Wang authored
We presently define all kinds of notifiers in notifier.h. This is not necessary at all, since different subsystems use different notifiers, they are almost non-related with each other. This can also save much build time. Suppose I add a new netdevice event, really I don't have to recompile all the source, just network related. Without this patch, all the source will be recompiled. I move the notify events near to their subsystem notifier registers, so that they can be found more easily. This patch: It is not necessary to share the same notifier.h. Signed-off-by:
-
Donggeun Kim authored
The FSA9480 is a USB port accessory detector and switch. This patch adds support the FSA9480 USB Switch. [akpm@linux-foundation.org: make a couple of things static] Signed-off-by:
Donggeun Kim <dg77.kim@samsung.com> Signed-off-by:
Minkyu Kang <mk7.kang@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Philip A. Prindeville authored
As stated in drivers/mfd/cs5535-mfd.c, the mfd driver exposes the BARs which then make the GPIO, MFGPT, ACPI, etc. all visible to the system. So the dependencies of the MFGPT stuff have changed, and most people expect Kconfig to bring in the necessary dependencies. Without them, the module fails to load and most people don't understand why because the details of the rewrite aren't captured anywhere most people who know to look. This dependency needs to be reflected in Kconfig. Signed-off-by:
Philip A. Prindeville <philipp@redfish-solutions.com> Acked-by:
Alexandros C. Couloumbis <alex@ozo.com> Acked-by:
Andres Salomon <dilinger@queued.net> Cc: <stable@kernel.org> Signed-off-by:
-
Arnaud Lacombe authored
Fixes WARNING: vmlinux.o(.data+0x15d3ac): Section mismatch in reference from the variable pci_eisa_driver to the function .init.text:pci_eisa_init() The variable pci_eisa_driver references the function __init pci_eisa_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by:
Arnaud Lacombe <lacombar@gmail.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Arnaud Lacombe authored
Unexpose to userland the following macros - __FUNCTION__ - NUMA_BUILD - COMPACTION_BUILD - REBUILD_DUE_TO_FTRACE_MCOUNT_RECORD Signed-off-by:
-
WANG Cong authored
Fix the warning: usr/include/linux/kernel.h:65: userspace cannot reference function or variable defined in the kernel As Michal noted, BUILD_BUG_ON stuffs should be moved under #ifdef __KERNEL__. Signed-off-by:
-
Uwe Kleine-König authored
Resource definitions that just define start, end and flags = IORESOURCE_MEM or IORESOURCE_IRQ (with start=end) are quite common. So introduce a shortcut for them. For completeness add macros for IORESOURCE_DMA and IORESOURCE_IO, too and also make available a set of macros to specify named resources of all types which are less common. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Maxin B John authored
devres uses the pointer value as key after it's freed, which is safe but triggers spurious use-after-free warnings on some static analysis tools. Rearrange code to avoid such warnings. Signed-off-by:
Maxin B. John <maxin.john@gmail.com> Reviewed-by:
Rolf Eike Beer <eike-kernel@sf-tec.de> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Mike Frysinger authored
This header isn't exported to user-space, and even if it was, the __KERNEL__ check covers the entire file, so we'd get a useless stub in the first place. So punt it. Signed-off-by:
-
Rakib Mullick authored
Signed-off-by:
Rakib Mullick <rakib.mullick@gmail.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: David Airlie <airlied@linux.ie> Cc: Tejun Heo <tj@kernel.org> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Richard Weinberger authored
GCC 4.6's -Wunused-but-set-variable found some dead code. Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Richard Weinberger authored
Linux can have pids up to 4*1024*1024. To handle such huge numbers pid_buf needs to be larger. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Richard Weinberger authored
Until now UML had no x86_64 vDSO. So glibc always used the vsyscall page for gettimeday() and friends. Calls to gettimeday() returned falsely the host time and confused some programs. This patch adds a vDSO which turns all __vdso_* calls into a system call so that UML can trap them. As glibc still uses the vsyscall page for static binaries this patch improves the situation only for dynamic binaries. Signed-off-by:
-
Richard Weinberger authored
Implement arch_vma_name() and make get_gate_vma(), in_gate_area() and in_gate_area_no_mm() a nop. We need arch_vma_name() to support vDSO. Signed-off-by:
-
